From 81a95ec724b7b874f850cb0f32f1981ccc4fb062 Mon Sep 17 00:00:00 2001 From: Karel Zak Date: Fri, 20 Nov 2015 12:54:10 +0100 Subject: [PATCH] core: support ranges for RLIMIT options The new parser supports: - specify both limits to the same value - specify both limits the size or time specific suffixes are supported, for example LimitRTTIME=1sec LimitAS=4G:16G The patch introduces parse_rlimit_range() and rlim type (size, sec, usec, etc.) specific parsers. No code is duplicated now. The patch also sync docs for DefaultLimitXXX= and LimitXXX=. References: https://github.com/systemd/systemd/issues/1769 Cherry-picked from: 91518d20ddf0376808544576d0ef0883cedc67d4 Resolves: #1351415 --- man/systemd-system.conf.xml | 27 ++- man/systemd.exec.xml | 5 +- src/core/load-fragment.c | 243 ++++++++++++----------- src/shared/util.c | 467 ++++++++++++++++++++++++++++++++++++++++++++ src/shared/util.h | 14 ++ src/test/test-unit-file.c | 31 +++ 6 files changed, 667 insertions(+), 120 deletions(-) diff --git a/man/systemd-system.conf.xml b/man/systemd-system.conf.xml index b7d9cdee0..39d19bc71 100644 --- a/man/systemd-system.conf.xml +++ b/man/systemd-system.conf.xml @@ -326,13 +326,26 @@ These settings control various default resource limits for units. See setrlimit2 - for details. Use the string infinity to - configure no limit on a specific resource. The multiplicative suffixes - K (=1024), M (=1024*1024) and so on for G, T, P and E may be used for - resource limits measured in bytes (e.g. DefaultLimitAS=16G). These - settings may be overridden in individual units using the corresponding - LimitXXX= directives. Note that these resource limits are only - defaults for units, they are not applied to PID 1 + for details. The resource limit is possible to specify in two formats, + to set soft and hard limits to the same value, + or to set both limits individually (e.g. DefaultLimitAS=4G:16G). + Use the string infinity to + configure no limit on a specific resource. The multiplicative + suffixes K (=1024), M (=1024*1024) and so on for G, T, P and E + may be used for resource limits measured in bytes + (e.g. DefaultLimitAS=16G). For the limits referring to time values, + the usual time units ms, s, min, h and so on may be used (see + systemd.time7 + for details). Note that if no time unit is specified for + DefaultLimitCPU= the default unit of seconds is + implied, while for DefaultLimitRTTIME= the default + unit of microseconds is implied. Also, note that the effective + granularity of the limits might influence their + enforcement. For example, time limits specified for + DefaultLimitCPU= will be rounded up implicitly to + multiples of 1s. These settings may be overridden in individual units + using the corresponding LimitXXX= directives. Note that these resource + limits are only defaults for units, they are not applied to PID 1 itself. diff --git a/man/systemd.exec.xml b/man/systemd.exec.xml index cfdcc3d17..0cd469cd9 100644 --- a/man/systemd.exec.xml +++ b/man/systemd.exec.xml @@ -558,7 +558,10 @@ These settings set both soft and hard limits of various resources for executed processes. See setrlimit2 - for details. Use the string infinity to + for details. The resource limit is possible to specify in two formats, + to set soft and hard limits to the same value, + or to set both limits individually (e.g. LimitAS=4G:16G). + Use the string infinity to configure no limit on a specific resource. The multiplicative suffixes K (=1024), M (=1024*1024) and so on for G, T, P and E may be used for resource limits measured in bytes diff --git a/src/core/load-fragment.c b/src/core/load-fragment.c index 8afe9d7e8..d307f1c74 100644 --- a/src/core/load-fragment.c +++ b/src/core/load-fragment.c @@ -1075,81 +1075,108 @@ int config_parse_bounding_set(const char *unit, return 0; } -int config_parse_limit(const char *unit, - const char *filename, - unsigned line, - const char *section, - unsigned section_line, - const char *lvalue, - int ltype, - const char *rvalue, - void *data, - void *userdata) { - struct rlimit **rl = data; - unsigned long long u; +static int rlim_parse_u64(const char *val, rlim_t *res) { + int r = 0; - assert(filename); - assert(lvalue); - assert(rvalue); - assert(data); + if (streq(val, "infinity")) + *res = RLIM_INFINITY; + else { + uint64_t u; - rl += ltype; + /* setrlimit(2) suggests rlim_t is always 64bit on Linux. */ + assert_cc(sizeof(rlim_t) == sizeof(uint64_t)); + + r = safe_atou64(val, &u); + if (r >= 0 && u >= (uint64_t) RLIM_INFINITY) + r = -ERANGE; + if (r == 0) + *res = (rlim_t) u; + } + return r; +} - if (streq(rvalue, "infinity")) - u = (unsigned long long) RLIM_INFINITY; +static int rlim_parse_size(const char *val, rlim_t *res) { + int r = 0; + + if (streq(val, "infinity")) + *res = RLIM_INFINITY; else { - int r; + off_t u; - r = safe_atollu(rvalue, &u); - if (r < 0) { - log_syntax(unit, LOG_ERR, filename, line, -r, - "Failed to parse resource value, ignoring: %s", rvalue); - return 0; - } + r = parse_size(val, 1024, &u); + if (r >= 0 && u >= (off_t) RLIM_INFINITY) + r = -ERANGE; + if (r == 0) + *res = (rlim_t) u; } + return r; +} - if (!*rl) { - *rl = new(struct rlimit, 1); - if (!*rl) - return log_oom(); - } +static int rlim_parse_sec(const char *val, rlim_t *res) { + int r = 0; - (*rl)->rlim_cur = (*rl)->rlim_max = (rlim_t) u; - return 0; + if (streq(val, "infinity")) + *res = RLIM_INFINITY; + else { + usec_t t; + + r = parse_sec(val, &t); + if (r < 0) + return r; + if (t == USEC_INFINITY) + *res = RLIM_INFINITY; + else + *res = (rlim_t) (DIV_ROUND_UP(t, USEC_PER_SEC)); + + } + return r; } -int config_parse_bytes_limit(const char *unit, - const char *filename, - unsigned line, - const char *section, - unsigned section_line, - const char *lvalue, - int ltype, - const char *rvalue, - void *data, - void *userdata) { +static int rlim_parse_usec(const char *val, rlim_t *res) { + int r = 0; - struct rlimit **rl = data; - uint64_t bytes; + if (streq(val, "infinity")) + *res = RLIM_INFINITY; + else { + usec_t t; - assert(filename); - assert(lvalue); - assert(rvalue); - assert(data); + r = parse_time(val, &t, 1); + if (r < 0) + return r; + if (t == USEC_INFINITY) + *res = RLIM_INFINITY; + else + *res = (rlim_t) t; + } + return r; +} - rl += ltype; +static int parse_rlimit_range( + const char *unit, + const char *filename, + unsigned line, + const char *value, + struct rlimit **rl, + int (*rlim_parser)(const char *, rlim_t *)) { - if (streq(rvalue, "infinity")) - bytes = (uint64_t) RLIM_INFINITY; - else { - int r; + rlim_t soft, hard; + _cleanup_free_ char *sword = NULL, *hword = NULL; + int nwords, r; - r = parse_size(rvalue, 1024, &bytes); - if (r < 0) { - log_syntax(unit, LOG_ERR, filename, line, r, "Failed to parse resource value, ignoring: %s", rvalue); - return 0; - } + assert(value); + + /* or */ + nwords = extract_many_words(&value, ":", EXTRACT_DONT_COALESCE_SEPARATORS, &sword, &hword, NULL); + r = nwords < 0 ? nwords : nwords == 0 ? -EINVAL : 0; + + if (r == 0) + r = rlim_parser(sword, &soft); + if (r == 0 && nwords == 2) + r = rlim_parser(hword, &hard); + if (r < 0) { + log_syntax(unit, LOG_ERR, filename, line, r, "Failed to parse resource value, ignoring: %s", value); + return 0; } if (!*rl) { @@ -1157,12 +1184,12 @@ int config_parse_bytes_limit(const char *unit, if (!*rl) return log_oom(); } - - (*rl)->rlim_cur = (*rl)->rlim_max = (rlim_t) bytes; + (*rl)->rlim_cur = soft; + (*rl)->rlim_max = nwords == 2 ? hard : soft; return 0; } -int config_parse_sec_limit( +int config_parse_limit( const char *unit, const char *filename, unsigned line, @@ -1175,8 +1202,6 @@ int config_parse_sec_limit( void *userdata) { struct rlimit **rl = data; - rlim_t seconds; - int r; assert(filename); assert(lvalue); @@ -1184,36 +1209,33 @@ int config_parse_sec_limit( assert(data); rl += ltype; + return parse_rlimit_range(unit, filename, line, rvalue, rl, rlim_parse_u64); +} - if (streq(rvalue, "infinity")) - seconds = RLIM_INFINITY; - else { - usec_t t; - - r = parse_sec(rvalue, &t); - if (r < 0) { - log_syntax(unit, LOG_ERR, filename, line, r, "Failed to parse resource value, ignoring: %s", rvalue); - return 0; - } +int config_parse_bytes_limit( + const char *unit, + const char *filename, + unsigned line, + const char *section, + unsigned section_line, + const char *lvalue, + int ltype, + const char *rvalue, + void *data, + void *userdata) { - if (t == USEC_INFINITY) - seconds = RLIM_INFINITY; - else - seconds = (rlim_t) (DIV_ROUND_UP(t, USEC_PER_SEC)); - } + struct rlimit **rl = data; - if (!*rl) { - *rl = new(struct rlimit, 1); - if (!*rl) - return log_oom(); - } + assert(filename); + assert(lvalue); + assert(rvalue); + assert(data); - (*rl)->rlim_cur = (*rl)->rlim_max = seconds; - return 0; + rl += ltype; + return parse_rlimit_range(unit, filename, line, rvalue, rl, rlim_parse_size); } - -int config_parse_usec_limit( +int config_parse_sec_limit( const char *unit, const char *filename, unsigned line, @@ -1226,8 +1248,6 @@ int config_parse_usec_limit( void *userdata) { struct rlimit **rl = data; - rlim_t useconds; - int r; assert(filename); assert(lvalue); @@ -1235,34 +1255,33 @@ int config_parse_usec_limit( assert(data); rl += ltype; + return parse_rlimit_range(unit, filename, line, rvalue, rl, rlim_parse_sec); +} - if (streq(rvalue, "infinity")) - useconds = RLIM_INFINITY; - else { - usec_t t; - - r = parse_time(rvalue, &t, 1); - if (r < 0) { - log_syntax(unit, LOG_ERR, filename, line, r, "Failed to parse resource value, ignoring: %s", rvalue); - return 0; - } +int config_parse_usec_limit( + const char *unit, + const char *filename, + unsigned line, + const char *section, + unsigned section_line, + const char *lvalue, + int ltype, + const char *rvalue, + void *data, + void *userdata) { - if (t == USEC_INFINITY) - useconds = RLIM_INFINITY; - else - useconds = (rlim_t) t; - } + struct rlimit **rl = data; - if (!*rl) { - *rl = new(struct rlimit, 1); - if (!*rl) - return log_oom(); - } + assert(filename); + assert(lvalue); + assert(rvalue); + assert(data); - (*rl)->rlim_cur = (*rl)->rlim_max = useconds; - return 0; + rl += ltype; + return parse_rlimit_range(unit, filename, line, rvalue, rl, rlim_parse_usec); } + #ifdef HAVE_SYSV_COMPAT int config_parse_sysv_priority(const char *unit, const char *filename, diff --git a/src/shared/util.c b/src/shared/util.c index 036677eb4..f75ed9dd4 100644 --- a/src/shared/util.c +++ b/src/shared/util.c @@ -93,6 +93,7 @@ #include "virt.h" #include "def.h" #include "sparse-endian.h" +#include "conf-parser.h" int saved_argc = 0; char **saved_argv = NULL; @@ -100,6 +101,8 @@ char **saved_argv = NULL; static volatile unsigned cached_columns = 0; static volatile unsigned cached_lines = 0; +bool unichar_is_valid(int32_t ch); + size_t page_size(void) { static thread_local size_t pgsz = 0; long r; @@ -1365,6 +1368,207 @@ char *cescape(const char *s) { return r; } +bool unichar_is_valid(int32_t ch) { + + if (ch >= 0x110000) /* End of unicode space */ + return false; + if ((ch & 0xFFFFF800) == 0xD800) /* Reserved area for UTF-16 */ + return false; + if ((ch >= 0xFDD0) && (ch <= 0xFDEF)) /* Reserved */ + return false; + if ((ch & 0xFFFE) == 0xFFFE) /* BOM (Byte Order Mark) */ + return false; + + return true; +} + +int cunescape_one(const char *p, size_t length, int32_t *ret, bool *eight_bit) { + int r = 1; + + assert(p); + assert(*p); + assert(ret); + + /* Unescapes C style. Returns the unescaped character in ret. + * Sets *eight_bit to true if the escaped sequence either fits in + * one byte in UTF-8 or is a non-unicode literal byte and should + * instead be copied directly. + */ + + if (length != (size_t) -1 && length < 1) + return -EINVAL; + + switch (p[0]) { + + case 'a': + *ret = '\a'; + break; + case 'b': + *ret = '\b'; + break; + case 'f': + *ret = '\f'; + break; + case 'n': + *ret = '\n'; + break; + case 'r': + *ret = '\r'; + break; + case 't': + *ret = '\t'; + break; + case 'v': + *ret = '\v'; + break; + case '\\': + *ret = '\\'; + break; + case '"': + *ret = '"'; + break; + case '\'': + *ret = '\''; + break; + + case 's': + /* This is an extension of the XDG syntax files */ + *ret = ' '; + break; + + case 'x': { + /* hexadecimal encoding */ + int a, b; + + if (length != (size_t) -1 && length < 3) + return -EINVAL; + + a = unhexchar(p[1]); + if (a < 0) + return -EINVAL; + + b = unhexchar(p[2]); + if (b < 0) + return -EINVAL; + + /* Don't allow NUL bytes */ + if (a == 0 && b == 0) + return -EINVAL; + + *ret = (a << 4U) | b; + *eight_bit = true; + r = 3; + break; + } + + case 'u': { + /* C++11 style 16bit unicode */ + + int a[4]; + unsigned i; + uint32_t c; + + if (length != (size_t) -1 && length < 5) + return -EINVAL; + + for (i = 0; i < 4; i++) { + a[i] = unhexchar(p[1 + i]); + if (a[i] < 0) + return a[i]; + } + + c = ((uint32_t) a[0] << 12U) | ((uint32_t) a[1] << 8U) | ((uint32_t) a[2] << 4U) | (uint32_t) a[3]; + + /* Don't allow 0 chars */ + if (c == 0) + return -EINVAL; + + *ret = c; + r = 5; + break; + } + + case 'U': { + /* C++11 style 32bit unicode */ + + int a[8]; + unsigned i; + int32_t c; + + if (length != (size_t) -1 && length < 9) + return -EINVAL; + + for (i = 0; i < 8; i++) { + a[i] = unhexchar(p[1 + i]); + if (a[i] < 0) + return a[i]; + } + + c = ((uint32_t) a[0] << 28U) | ((uint32_t) a[1] << 24U) | ((uint32_t) a[2] << 20U) | ((uint32_t) a[3] << 16U) | + ((uint32_t) a[4] << 12U) | ((uint32_t) a[5] << 8U) | ((uint32_t) a[6] << 4U) | (uint32_t) a[7]; + + /* Don't allow 0 chars */ + if (c == 0) + return -EINVAL; + + /* Don't allow invalid code points */ + if (!unichar_is_valid(c)) + return -EINVAL; + + *ret = c; + r = 9; + break; + } + + case '0': + case '1': + case '2': + case '3': + case '4': + case '5': + case '6': + case '7': { + /* octal encoding */ + int a, b, c; + int32_t m; + + if (length != (size_t) -1 && length < 3) + return -EINVAL; + + a = unoctchar(p[0]); + if (a < 0) + return -EINVAL; + + b = unoctchar(p[1]); + if (b < 0) + return -EINVAL; + + c = unoctchar(p[2]); + if (c < 0) + return -EINVAL; + + /* don't allow NUL bytes */ + if (a == 0 && b == 0 && c == 0) + return -EINVAL; + + /* Don't allow bytes above 255 */ + m = ((uint32_t) a << 6U) | ((uint32_t) b << 3U) | (uint32_t) c; + if (m > 255) + return -EINVAL; + + *ret = m; + *eight_bit = true; + r = 3; + break; + } + + default: + return -EINVAL; + } + + return r; +} + char *cunescape_length_with_prefix(const char *s, size_t length, const char *prefix) { char *r, *t; const char *f; @@ -8207,3 +8411,266 @@ bool colors_enabled(void) { return parse_boolean(colors) != 0; } + +int extract_first_word(const char **p, char **ret, const char *separators, ExtractFlags flags) { + _cleanup_free_ char *s = NULL; + size_t allocated = 0, sz = 0; + char c; + int r; + + char quote = 0; /* 0 or ' or " */ + bool backslash = false; /* whether we've just seen a backslash */ + + assert(p); + assert(ret); + + /* Bail early if called after last value or with no input */ + if (!*p) + goto finish_force_terminate; + c = **p; + + if (!separators) + separators = WHITESPACE; + + /* Parses the first word of a string, and returns it in + * *ret. Removes all quotes in the process. When parsing fails + * (because of an uneven number of quotes or similar), leaves + * the pointer *p at the first invalid character. */ + + if (flags & EXTRACT_DONT_COALESCE_SEPARATORS) + if (!GREEDY_REALLOC(s, allocated, sz+1)) + return -ENOMEM; + + for (;; (*p)++, c = **p) { + if (c == 0) + goto finish_force_terminate; + else if (strchr(separators, c)) { + if (flags & EXTRACT_DONT_COALESCE_SEPARATORS) { + (*p)++; + goto finish_force_next; + } + } else { + /* We found a non-blank character, so we will always + * want to return a string (even if it is empty), + * allocate it here. */ + if (!GREEDY_REALLOC(s, allocated, sz+1)) + return -ENOMEM; + break; + } + } + + for (;; (*p)++, c = **p) { + if (backslash) { + if (!GREEDY_REALLOC(s, allocated, sz+7)) + return -ENOMEM; + + if (c == 0) { + if ((flags & EXTRACT_CUNESCAPE_RELAX) && + (!quote || flags & EXTRACT_RELAX)) { + /* If we find an unquoted trailing backslash and we're in + * EXTRACT_CUNESCAPE_RELAX mode, keep it verbatim in the + * output. + * + * Unbalanced quotes will only be allowed in EXTRACT_RELAX + * mode, EXTRACT_CUNESCAPE_RELAX mode does not allow them. + */ + s[sz++] = '\\'; + goto finish_force_terminate; + } + if (flags & EXTRACT_RELAX) + goto finish_force_terminate; + return -EINVAL; + } + + if (flags & EXTRACT_CUNESCAPE) { + bool eight_bit = false; + int32_t u; + + r = cunescape_one(*p, (size_t) -1, &u, &eight_bit); + if (r < 0) { + if (flags & EXTRACT_CUNESCAPE_RELAX) { + s[sz++] = '\\'; + s[sz++] = c; + } else + return -EINVAL; + } else { + (*p) += r - 1; + + if (eight_bit) + s[sz++] = u; + else + sz += utf8_encode_unichar(s + sz, u); + } + } else + s[sz++] = c; + + backslash = false; + + } else if (quote) { /* inside either single or double quotes */ + for (;; (*p)++, c = **p) { + if (c == 0) { + if (flags & EXTRACT_RELAX) + goto finish_force_terminate; + return -EINVAL; + } else if (c == quote) { /* found the end quote */ + quote = 0; + break; + } else if (c == '\\' && !(flags & EXTRACT_RETAIN_ESCAPE)) { + backslash = true; + break; + } else { + if (!GREEDY_REALLOC(s, allocated, sz+2)) + return -ENOMEM; + + s[sz++] = c; + } + } + + } else { + for (;; (*p)++, c = **p) { + if (c == 0) + goto finish_force_terminate; + else if ((c == '\'' || c == '"') && (flags & EXTRACT_QUOTES)) { + quote = c; + break; + } else if (c == '\\' && !(flags & EXTRACT_RETAIN_ESCAPE)) { + backslash = true; + break; + } else if (strchr(separators, c)) { + if (flags & EXTRACT_DONT_COALESCE_SEPARATORS) { + (*p)++; + goto finish_force_next; + } + /* Skip additional coalesced separators. */ + for (;; (*p)++, c = **p) { + if (c == 0) + goto finish_force_terminate; + if (!strchr(separators, c)) + break; + } + goto finish; + + } else { + if (!GREEDY_REALLOC(s, allocated, sz+2)) + return -ENOMEM; + + s[sz++] = c; + } + } + } + } + +finish_force_terminate: + *p = NULL; +finish: + if (!s) { + *p = NULL; + *ret = NULL; + return 0; + } + +finish_force_next: + s[sz] = 0; + *ret = s; + s = NULL; + + return 1; +} + +int extract_first_word_and_warn( + const char **p, + char **ret, + const char *separators, + ExtractFlags flags, + const char *unit, + const char *filename, + unsigned line, + const char *rvalue) { + + /* Try to unquote it, if it fails, warn about it and try again + * but this time using EXTRACT_CUNESCAPE_RELAX to keep the + * backslashes verbatim in invalid escape sequences. */ + + const char *save; + int r; + + save = *p; + r = extract_first_word(p, ret, separators, flags); + if (r >= 0) + return r; + + if (r == -EINVAL && !(flags & EXTRACT_CUNESCAPE_RELAX)) { + + /* Retry it with EXTRACT_CUNESCAPE_RELAX. */ + *p = save; + r = extract_first_word(p, ret, separators, flags|EXTRACT_CUNESCAPE_RELAX); + if (r >= 0) { + /* It worked this time, hence it must have been an invalid escape sequence we could correct. */ + log_syntax(unit, LOG_WARNING, filename, line, EINVAL, "Invalid escape sequences in line, correcting: \"%s\"", rvalue); + return r; + } + + /* If it's still EINVAL; then it must be unbalanced quoting, report this. */ + if (r == -EINVAL) + return log_syntax(unit, LOG_ERR, filename, line, r, "Unbalanced quoting, ignoring: \"%s\"", rvalue); + } + + /* Can be any error, report it */ + return log_syntax(unit, LOG_ERR, filename, line, r, "Unable to decode word \"%s\", ignoring: %m", rvalue); +} + +int extract_many_words(const char **p, const char *separators, ExtractFlags flags, ...) { + va_list ap; + char **l; + int n = 0, i, c, r; + + /* Parses a number of words from a string, stripping any + * quotes if necessary. */ + + assert(p); + + /* Count how many words are expected */ + va_start(ap, flags); + for (;;) { + if (!va_arg(ap, char **)) + break; + n++; + } + va_end(ap); + + if (n <= 0) + return 0; + + /* Read all words into a temporary array */ + l = newa0(char*, n); + for (c = 0; c < n; c++) { + + r = extract_first_word(p, &l[c], separators, flags); + if (r < 0) { + int j; + + for (j = 0; j < c; j++) + free(l[j]); + + return r; + } + + if (r == 0) + break; + } + + /* If we managed to parse all words, return them in the passed + * in parameters */ + va_start(ap, flags); + for (i = 0; i < n; i++) { + char **v; + + v = va_arg(ap, char **); + assert(v); + + *v = l[i]; + } + va_end(ap); + + return c; +} diff --git a/src/shared/util.h b/src/shared/util.h index a441e44ff..be04524cc 100644 --- a/src/shared/util.h +++ b/src/shared/util.h @@ -315,6 +315,7 @@ int undecchar(char c) _const_; char *cescape(const char *s); char *cunescape(const char *s); char *cunescape_length(const char *s, size_t length); +int cunescape_one(const char *p, size_t length, int32_t *ret, bool *eight_bit); char *cunescape_length_with_prefix(const char *s, size_t length, const char *prefix); char *xescape(const char *s, const char *bad); @@ -1082,3 +1083,16 @@ void sigkill_wait(pid_t *pid); int syslog_parse_priority(const char **p, int *priority, bool with_facility); char *shell_maybe_quote(const char *s); + +typedef enum ExtractFlags { + EXTRACT_RELAX = 1, + EXTRACT_CUNESCAPE = 2, + EXTRACT_CUNESCAPE_RELAX = 4, + EXTRACT_QUOTES = 8, + EXTRACT_DONT_COALESCE_SEPARATORS = 16, + EXTRACT_RETAIN_ESCAPE = 32, +} ExtractFlags; + +int extract_first_word(const char **p, char **ret, const char *separators, ExtractFlags flags); +int extract_first_word_and_warn(const char **p, char **ret, const char *separators, ExtractFlags flags, const char *unit, const char *filename, unsigned line, const char *rvalue); +int extract_many_words(const char **p, const char *separators, ExtractFlags flags, ...) _sentinel_; diff --git a/src/test/test-unit-file.c b/src/test/test-unit-file.c index 87c81ccd7..931dfeda8 100644 --- a/src/test/test-unit-file.c +++ b/src/test/test-unit-file.c @@ -554,11 +554,22 @@ static void test_config_parse_rlimit(void) { assert_se(rl[RLIMIT_NOFILE]->rlim_cur == 55); assert_se(rl[RLIMIT_NOFILE]->rlim_cur == rl[RLIMIT_NOFILE]->rlim_max); + + assert_se(config_parse_limit(NULL, "fake", 1, "section", 1, "LimitNOFILE", RLIMIT_NOFILE, "55:66", rl, NULL) >= 0); + assert_se(rl[RLIMIT_NOFILE]); + assert_se(rl[RLIMIT_NOFILE]->rlim_cur == 55); + assert_se(rl[RLIMIT_NOFILE]->rlim_max == 66); + assert_se(config_parse_limit(NULL, "fake", 1, "section", 1, "LimitNOFILE", RLIMIT_NOFILE, "infinity", rl, NULL) >= 0); assert_se(rl[RLIMIT_NOFILE]); assert_se(rl[RLIMIT_NOFILE]->rlim_cur == RLIM_INFINITY); assert_se(rl[RLIMIT_NOFILE]->rlim_cur == rl[RLIMIT_NOFILE]->rlim_max); + assert_se(config_parse_limit(NULL, "fake", 1, "section", 1, "LimitNOFILE", RLIMIT_NOFILE, "infinity:infinity", rl, NULL) >= 0); + assert_se(rl[RLIMIT_NOFILE]); + assert_se(rl[RLIMIT_NOFILE]->rlim_cur == RLIM_INFINITY); + assert_se(rl[RLIMIT_NOFILE]->rlim_cur == rl[RLIMIT_NOFILE]->rlim_max); + free(rl[RLIMIT_NOFILE]); assert_se(config_parse_sec_limit(NULL, "fake", 1, "section", 1, "LimitCPU", RLIMIT_CPU, "56", rl, NULL) >= 0); assert_se(rl[RLIMIT_CPU]); @@ -570,6 +581,11 @@ static void test_config_parse_rlimit(void) { assert_se(rl[RLIMIT_CPU]->rlim_cur == 57); assert_se(rl[RLIMIT_CPU]->rlim_cur == rl[RLIMIT_CPU]->rlim_max); + assert_se(config_parse_sec_limit(NULL, "fake", 1, "section", 1, "LimitCPU", RLIMIT_CPU, "40s:1m", rl, NULL) >= 0); + assert_se(rl[RLIMIT_CPU]); + assert_se(rl[RLIMIT_CPU]->rlim_cur == 40); + assert_se(rl[RLIMIT_CPU]->rlim_max == 60); + assert_se(config_parse_sec_limit(NULL, "fake", 1, "section", 1, "LimitCPU", RLIMIT_CPU, "infinity", rl, NULL) >= 0); assert_se(rl[RLIMIT_CPU]); assert_se(rl[RLIMIT_CPU]->rlim_cur == RLIM_INFINITY); @@ -587,16 +603,31 @@ static void test_config_parse_rlimit(void) { assert_se(rl[RLIMIT_RTTIME]->rlim_cur == 58); assert_se(rl[RLIMIT_RTTIME]->rlim_cur == rl[RLIMIT_RTTIME]->rlim_max); + assert_se(config_parse_usec_limit(NULL, "fake", 1, "section", 1, "LimitRTTIME", RLIMIT_RTTIME, "58:60", rl, NULL) >= 0); + assert_se(rl[RLIMIT_RTTIME]); + assert_se(rl[RLIMIT_RTTIME]->rlim_cur == 58); + assert_se(rl[RLIMIT_RTTIME]->rlim_max == 60); + assert_se(config_parse_usec_limit(NULL, "fake", 1, "section", 1, "LimitRTTIME", RLIMIT_RTTIME, "59s", rl, NULL) >= 0); assert_se(rl[RLIMIT_RTTIME]); assert_se(rl[RLIMIT_RTTIME]->rlim_cur == 59 * USEC_PER_SEC); assert_se(rl[RLIMIT_RTTIME]->rlim_cur == rl[RLIMIT_RTTIME]->rlim_max); + assert_se(config_parse_usec_limit(NULL, "fake", 1, "section", 1, "LimitRTTIME", RLIMIT_RTTIME, "59s:123s", rl, NULL) >= 0); + assert_se(rl[RLIMIT_RTTIME]); + assert_se(rl[RLIMIT_RTTIME]->rlim_cur == 59 * USEC_PER_SEC); + assert_se(rl[RLIMIT_RTTIME]->rlim_max == 123 * USEC_PER_SEC); + assert_se(config_parse_usec_limit(NULL, "fake", 1, "section", 1, "LimitRTTIME", RLIMIT_RTTIME, "infinity", rl, NULL) >= 0); assert_se(rl[RLIMIT_RTTIME]); assert_se(rl[RLIMIT_RTTIME]->rlim_cur == RLIM_INFINITY); assert_se(rl[RLIMIT_RTTIME]->rlim_cur == rl[RLIMIT_RTTIME]->rlim_max); + assert_se(config_parse_usec_limit(NULL, "fake", 1, "section", 1, "LimitRTTIME", RLIMIT_RTTIME, "infinity:infinity", rl, NULL) >= 0); + assert_se(rl[RLIMIT_RTTIME]); + assert_se(rl[RLIMIT_RTTIME]->rlim_cur == RLIM_INFINITY); + assert_se(rl[RLIMIT_RTTIME]->rlim_cur == rl[RLIMIT_RTTIME]->rlim_max); + assert_se(config_parse_usec_limit(NULL, "fake", 1, "section", 1, "LimitRTTIME", RLIMIT_RTTIME, "2345ms", rl, NULL) >= 0); assert_se(rl[RLIMIT_RTTIME]); assert_se(rl[RLIMIT_RTTIME]->rlim_cur == 2345 * USEC_PER_MSEC);