You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

807 lines
20 KiB

From 662c349a5a995c270c8f7bcf0a4b4a0408c813fd Mon Sep 17 00:00:00 2001
From: Zhilong Liu <zlliu@suse.com>
Date: Wed, 7 Jun 2017 17:31:26 +0800
Subject: [RHEL7.5 PATCH 154/169] mdadm/test: Convert code format to use
Tab
In case to make codes neat, this commit didn't change
any codes, just tidy up and use Tab as code format.
Signed-off-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
test | 702 ++++++++++++++++++++++++++++++++++++-------------------------------
1 file changed, 378 insertions(+), 324 deletions(-)
diff --git a/test b/test
index 13f1bda..7942d6e 100755
--- a/test
+++ b/test
@@ -3,8 +3,9 @@
# run test suite for mdadm
user=`id -un`
if [ " $user" != " root" ]
-then echo >&2 "test: testing can only be done as 'root'."
- exit 1;
+then
+ echo >&2 "test: testing can only be done as 'root'."
+ exit 1
fi
prefix='[0-9][0-9]'
@@ -13,7 +14,7 @@ dir=`pwd`
mdadm=$dir/mdadm
if [ \! -x $mdadm ]
then
- echo >&2 "test: $mdadm isn't usable."
+ echo >&2 "test: $mdadm isn't usable."
fi
testdir="tests"
@@ -25,8 +26,9 @@ echo "Testing on linux-$(uname -r) kernel"
# Check whether to run multipath tests
modprobe multipath 2> /dev/null
-if grep -s 'Personalities : .*multipath' > /dev/null /proc/mdstat ; then
- MULTIPATH="yes"
+if grep -s 'Personalities : .*multipath' > /dev/null /proc/mdstat
+then
+ MULTIPATH="yes"
fi
INTEGRITY=yes
DEVTYPE=loop
@@ -36,7 +38,9 @@ LVM_VOLGROUP=mdtest
export MDADM_NO_SYSTEMCTL=1
# assume md0, md1, md2 exist in /dev
-md0=/dev/md0 md1=/dev/md1 md2=/dev/md2
+md0=/dev/md0
+md1=/dev/md1
+md2=/dev/md2
mdp0=/dev/md_d0
mdp1=/dev/md_d1
@@ -69,21 +73,21 @@ config=/tmp/mdadm.conf
cleanup() {
udevadm settle
$mdadm -Ssq 2> /dev/null
- case $DEVTYPE in
- loop)
- for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 13
- do
- losetup -d /dev/loop$d ; # rm -f $targetdir/mdtest$d
- rm -f /dev/disk/by-path/loop*
- done
- ;;
- lvm)
- for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 13
- do
- eval "lvremove --quiet -f \$dev$d"
- done
- ;;
- esac
+ case $DEVTYPE in
+ loop)
+ for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 13
+ do
+ losetup -d /dev/loop$d # rm -f $targetdir/mdtest$d
+ rm -f /dev/disk/by-path/loop*
+ done
+ ;;
+ lvm)
+ for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 13
+ do
+ eval "lvremove --quiet -f \$dev$d"
+ done
+ ;;
+ esac
}
ctrl_c() {
@@ -91,329 +95,377 @@ ctrl_c() {
}
do_setup() {
- trap cleanup 0 1 3 15
- trap ctrl_c 2
+ trap cleanup 0 1 3 15
+ trap ctrl_c 2
- # make sure there are no loop devices remaining.
- # udev started things can sometimes prevent them being stopped
- # immediately
- while grep loop /proc/partitions > /dev/null 2>&1
- do
- mdadm -Ss
- losetup -d /dev/loop[0-9]* 2> /dev/null
- sleep 1
- done
- devlist=
- for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 13
- do
- sz=$size
- if [ $d -gt 7 ]; then sz=$ddfsize ; fi
- case $DEVTYPE in
- loop)
- [ -f $targetdir/mdtest$d ] || dd if=/dev/zero of=$targetdir/mdtest$d count=$sz bs=1K > /dev/null 2>&1
- # make sure udev doesn't touch
- mdadm --zero $targetdir/mdtest$d 2> /dev/null
- [ -b /dev/loop$d ] || mknod /dev/loop$d b 7 $d
- if [ $d -eq 7 ]
- then
- losetup /dev/loop$d $targetdir/mdtest6 # for multipath use
- else
- losetup /dev/loop$d $targetdir/mdtest$d
- fi
- eval dev$d=/dev/loop$d
- eval file$d=$targetdir/mdtest$d
- ;;
- lvm)
- unset MULTIPATH
- eval dev$d=/dev/mapper/${LVM_VOLGROUP}-mdtest$d
- if ! lvcreate --quiet -L ${sz}K -n mdtest$d $LVM_VOLGROUP; then
- trap '' 0 # make sure lvremove is not called
- eval echo error creating \$dev$d
- exit 129
- fi
- ;;
- ram)
- unset MULTIPATH
- eval dev$d=/dev/ram$d
- ;;
- esac
- eval devlist=\"\$devlist \$dev$d\"
- eval devlist$d=\"\$devlist\"
- #" <-- add this quote to un-confuse vim syntax highlighting
- done
- path0=$dev6
- path1=$dev7
-
- ulimit -c unlimited
- [ -f /proc/mdstat ] || modprobe md_mod
- echo 2000 > /proc/sys/dev/raid/speed_limit_max
- echo 0 > /sys/module/md_mod/parameters/start_ro
+ # make sure there are no loop devices remaining.
+ # udev started things can sometimes prevent them being stopped
+ # immediately
+ while grep loop /proc/partitions > /dev/null 2>&1
+ do
+ mdadm -Ss
+ losetup -d /dev/loop[0-9]* 2> /dev/null
+ sleep 1
+ done
+ devlist=
+ for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 13
+ do
+ sz=$size
+ if [ $d -gt 7 ]
+ then
+ sz=$ddfsize
+ fi
+ case $DEVTYPE in
+ loop)
+ [ -f $targetdir/mdtest$d ] ||
+ dd if=/dev/zero of=$targetdir/mdtest$d count=$sz bs=1K > /dev/null 2>&1
+ # make sure udev doesn't touch
+ mdadm --zero $targetdir/mdtest$d 2> /dev/null
+ [ -b /dev/loop$d ] || mknod /dev/loop$d b 7 $d
+ if [ $d -eq 7 ]
+ then
+ losetup /dev/loop$d $targetdir/mdtest6 # for multipath use
+ else
+ losetup /dev/loop$d $targetdir/mdtest$d
+ fi
+ eval dev$d=/dev/loop$d
+ eval file$d=$targetdir/mdtest$d
+ ;;
+ lvm)
+ unset MULTIPATH
+ eval dev$d=/dev/mapper/${LVM_VOLGROUP}-mdtest$d
+ if ! lvcreate --quiet -L ${sz}K -n mdtest$d $LVM_VOLGROUP
+ then
+ trap '' 0 # make sure lvremove is not called
+ eval echo error creating \$dev$d
+ exit 129
+ fi
+ ;;
+ ram)
+ unset MULTIPATH
+ eval dev$d=/dev/ram$d
+ ;;
+ esac
+ eval devlist=\"\$devlist \$dev$d\"
+ eval devlist$d=\"\$devlist\"
+ #" <-- add this quote to un-confuse vim syntax highlighting
+ done
+ path0=$dev6
+ path1=$dev7
+ ulimit -c unlimited
+ [ -f /proc/mdstat ] || modprobe md_mod
+ echo 2000 > /proc/sys/dev/raid/speed_limit_max
+ echo 0 > /sys/module/md_mod/parameters/start_ro
}
# mdadm always adds --quiet, and we want to see any unexpected messages
mdadm() {
- rm -f $targetdir/stderr
- case $* in
- *-S* ) udevadm settle
- p=`cat /proc/sys/dev/raid/speed_limit_max`
- echo 20000 > /proc/sys/dev/raid/speed_limit_max
- esac
- case $* in
- *-C* ) $mdadm 2> $targetdir/stderr --quiet "$@" --auto=yes;;
- * ) $mdadm 2> $targetdir/stderr --quiet "$@"
- esac
- rv=$?
- case $* in
- *-S* ) udevadm settle
- echo $p > /proc/sys/dev/raid/speed_limit_max
- esac
- cat >&2 $targetdir/stderr
- return $rv
+ rm -f $targetdir/stderr
+ case $* in
+ *-S* )
+ udevadm settle
+ p=`cat /proc/sys/dev/raid/speed_limit_max`
+ echo 20000 > /proc/sys/dev/raid/speed_limit_max
+ ;;
+ esac
+ case $* in
+ *-C* )
+ $mdadm 2> $targetdir/stderr --quiet "$@" --auto=yes
+ ;;
+ * )
+ $mdadm 2> $targetdir/stderr --quiet "$@"
+ ;;
+ esac
+ rv=$?
+ case $* in
+ *-S* )
+ udevadm settle
+ echo $p > /proc/sys/dev/raid/speed_limit_max
+ ;;
+ esac
+ cat >&2 $targetdir/stderr
+ return $rv
}
# check various things
check() {
- case $1 in
- spares )
- spares=`tr '] ' '\012\012' < /proc/mdstat | grep -c '(S)' || exit 0`
- if [ $spares -ne $2 ]
- then
- echo >&2 "ERROR expected $2 spares, found $spares"; exit 1;
- fi
- ;;
- raid* | linear )
- grep -s "active $1 " /proc/mdstat > /dev/null || {
- echo >&2 "ERROR active $1 not found" ; cat /proc/mdstat ; exit 1;}
- ;;
- algorithm )
- grep -s " algorithm $2 " /proc/mdstat > /dev/null || {
- echo >&2 "ERROR algorithm $2 not found"; cat /proc/mdstat; exit 1;}
- ;;
- resync | recovery | reshape)
- cnt=5
- while ! grep -s $1 /proc/mdstat > /dev/null
- do
- if [ $cnt -gt 0 ] && grep -v idle /sys/block/md*/md/sync_action > /dev/null
- then # Something isn't idle - wait a bit
+ case $1 in
+ spares )
+ spares=`tr '] ' '\012\012' < /proc/mdstat | grep -c '(S)' || exit 0`
+ if [ $spares -ne $2 ]
+ then
+ echo >&2 "ERROR expected $2 spares, found $spares"
+ exit 1
+ fi
+ ;;
+ raid* | linear )
+ grep -s "active $1 " /proc/mdstat > /dev/null || {
+ echo >&2 "ERROR active $1 not found"
+ cat /proc/mdstat
+ exit 1
+ }
+ ;;
+ algorithm )
+ grep -s " algorithm $2 " /proc/mdstat > /dev/null || {
+ echo >&2 "ERROR algorithm $2 not found"
+ cat /proc/mdstat
+ exit 1
+ }
+ ;;
+ resync | recovery | reshape )
+ cnt=5
+ while ! grep -s $1 /proc/mdstat > /dev/null
+ do
+ if [ $cnt -gt 0 ] && grep -v idle /sys/block/md*/md/sync_action > /dev/null
+ then # Something isn't idle - wait a bit
+ sleep 0.5
+ cnt=$[cnt-1]
+ else
+ echo >&2 ERROR no $1 happening
+ cat /proc/mdstat
+ exit 1
+ fi
+ done
+ ;;
+ nosync )
sleep 0.5
- cnt=$[cnt-1]
- else
- echo >&2 ERROR no $1 happening; cat /proc/mdstat; exit 1
- fi
- done
- ;;
-
- nosync )
- sleep 0.5
- # Since 4.2 we delay the close of recovery until there has been a chance for
- # spares to be activated. That means that a recovery that finds nothing
- # to do can still take a little longer than expected.
- # add an extra check: is sync_completed shows the end is reached, assume
- # there is no recovery.
- if grep -s -E '(resync|recovery|reshape) *=' > /dev/null /proc/mdstat ; then
- incomplete=`grep / /sys/block/md*/md/sync_completed 2> /dev/null | sed '/^ *\([0-9]*\) \/ \1/d'`
- if [ -n "$incomplete" ]; then
- echo >&2 "ERROR resync or recovery is happening!"; cat /proc/mdstat ; exit 1;
- fi
- fi
- ;;
-
- wait )
- p=`cat /proc/sys/dev/raid/speed_limit_max`
- echo 2000000 > /proc/sys/dev/raid/speed_limit_max
- sleep 0.1
- while grep -E '(resync|recovery|reshape|check|repair) *=' > /dev/null /proc/mdstat ||
- grep -v idle > /dev/null /sys/block/md*/md/sync_action
- do sleep 0.5;
- done
- echo $p > /proc/sys/dev/raid/speed_limit_max
- ;;
-
- state )
- grep -s "blocks.*\[$2\]\$" /proc/mdstat > /dev/null || {
- echo >&2 "ERROR state $2 not found!"; cat /proc/mdstat ; exit 1; }
- sleep 0.5
- ;;
-
- bitmap )
- grep -s bitmap > /dev/null /proc/mdstat || {
- echo >&2 ERROR no bitmap ; cat /proc/mdstat ; exit 1; }
- ;;
- nobitmap )
- if grep -s "bitmap" > /dev/null /proc/mdstat
- then
- echo >&2 ERROR bitmap present ; cat /proc/mdstat ; exit 1;
- fi
- ;;
-
- readonly )
- grep -s "read-only" > /dev/null /proc/mdstat || {
- echo >&2 "ERROR array is not read-only!"; cat /proc/mdstat ; exit 1; }
- ;;
-
- inactive )
- grep -s "inactive" > /dev/null /proc/mdstat || {
- echo >&2 "ERROR array is not inactive!"; cat /proc/mdstat ; exit 1; }
- ;;
- * ) echo >&2 ERROR unknown check $1 ; exit 1;
- esac
+ # Since 4.2 we delay the close of recovery until there has been a chance for
+ # spares to be activated. That means that a recovery that finds nothing
+ # to do can still take a little longer than expected.
+ # add an extra check: is sync_completed shows the end is reached, assume
+ # there is no recovery.
+ if grep -s -E '(resync|recovery|reshape) *=' > /dev/null /proc/mdstat
+ then
+ incomplete=`grep / /sys/block/md*/md/sync_completed 2> /dev/null | sed '/^ *\([0-9]*\) \/ \1/d'`
+ if [ -n "$incomplete" ]
+ then
+ echo >&2 "ERROR resync or recovery is happening!"
+ cat /proc/mdstat
+ exit 1
+ fi
+ fi
+ ;;
+ wait )
+ p=`cat /proc/sys/dev/raid/speed_limit_max`
+ echo 2000000 > /proc/sys/dev/raid/speed_limit_max
+ sleep 0.1
+ while grep -E '(resync|recovery|reshape|check|repair) *=' > /dev/null /proc/mdstat ||
+ grep -v idle > /dev/null /sys/block/md*/md/sync_action
+ do
+ sleep 0.5
+ done
+ echo $p > /proc/sys/dev/raid/speed_limit_max
+ ;;
+ state )
+ grep -s "blocks.*\[$2\]\$" /proc/mdstat > /dev/null || {
+ echo >&2 "ERROR state $2 not found!"
+ cat /proc/mdstat
+ exit 1
+ }
+ sleep 0.5
+ ;;
+ bitmap )
+ grep -s bitmap > /dev/null /proc/mdstat || {
+ echo >&2 ERROR no bitmap
+ cat /proc/mdstat
+ exit 1
+ }
+ ;;
+ nobitmap )
+ if grep -s "bitmap" > /dev/null /proc/mdstat
+ then
+ echo >&2 ERROR bitmap present
+ cat /proc/mdstat
+ exit 1
+ fi
+ ;;
+ readonly )
+ grep -s "read-only" > /dev/null /proc/mdstat || {
+ echo >&2 "ERROR array is not read-only!"
+ cat /proc/mdstat
+ exit 1
+ }
+ ;;
+ inactive )
+ grep -s "inactive" > /dev/null /proc/mdstat || {
+ echo >&2 "ERROR array is not inactive!"
+ cat /proc/mdstat
+ exit 1
+ }
+ ;;
+ * )
+ echo >&2 ERROR unknown check $1
+ exit 1
+ ;;
+ esac
}
no_errors() {
- if [ -s $targetdir/stderr ]
- then echo Bad errors from mdadm: ; cat $targetdir/stderr; exit 2;
- fi
+ if [ -s $targetdir/stderr ]
+ then
+ echo Bad errors from mdadm:
+ cat $targetdir/stderr
+ exit 2
+ fi
}
-# basic device test
+# basic device test
testdev() {
- udevadm settle
- dev=$1
- cnt=$2
- dvsize=$3
- chunk=$4
- if [ -z "$5" ]; then
- mkfs.ext3 -F -j $dev > /dev/null 2>&1 && fsck -fn $dev >&2
- fi
- dsize=$[dvsize/chunk]
- dsize=$[dsize*chunk]
- rasize=$[dsize*2*cnt]
- # rasize is in sectors
- if [ -n "$DEV_ROUND_K" ]; then
- rasize=$[rasize/DEV_ROUND_K/2]
- rasize=$[rasize*DEV_ROUND_K*2]
- fi
- if [ `/sbin/blockdev --getsize $dev` -eq 0 ]; then sleep 2 ; fi
- _sz=`/sbin/blockdev --getsize $dev`
- if [ $rasize -lt $_sz -o $[rasize*4/5] -gt $_sz ]
- then
- echo "ERROR: size is wrong for $dev: $cnt * $dvsize (chunk=$chunk) = $rasize, not $_sz"
- exit 1
- fi
+ udevadm settle
+ dev=$1
+ cnt=$2
+ dvsize=$3
+ chunk=$4
+ if [ -z "$5" ]
+ then
+ mkfs.ext3 -F -j $dev > /dev/null 2>&1 && fsck -fn $dev >&2
+ fi
+ dsize=$[dvsize/chunk]
+ dsize=$[dsize*chunk]
+ rasize=$[dsize*2*cnt]
+ # rasize is in sectors
+ if [ -n "$DEV_ROUND_K" ]
+ then
+ rasize=$[rasize/DEV_ROUND_K/2]
+ rasize=$[rasize*DEV_ROUND_K*2]
+ fi
+ if [ `/sbin/blockdev --getsize $dev` -eq 0 ]
+ then
+ sleep 2
+ fi
+ _sz=`/sbin/blockdev --getsize $dev`
+ if [ $rasize -lt $_sz -o $[rasize*4/5] -gt $_sz ]
+ then
+ echo "ERROR: size is wrong for $dev: $cnt * $dvsize (chunk=$chunk) = $rasize, not $_sz"
+ exit 1
+ fi
}
fast_sync() {
- echo 200000 > /proc/sys/dev/raid/speed_limit_max
+ echo 200000 > /proc/sys/dev/raid/speed_limit_max
}
rotest() {
- dev=$1
- fsck -fn $dev >&2
+ dev=$1
+ fsck -fn $dev >&2
}
do_test() {
- _script=$1
- _basename=`basename $_script`
- if [ -f "$_script" ]
- then
- rm -f $targetdir/stderr
- # stop all arrays, just incase some script left an array active.
- $mdadm -Ssq 2> /dev/null
- mdadm --zero $devlist 2> /dev/null
- mdadm --zero $devlist 2> /dev/null
- # this might have been reset: restore the default.
- echo 2000 > /proc/sys/dev/raid/speed_limit_max
- # source script in a subshell, so it has access to our
- # namespace, but cannot change it.
- echo -ne "$_script... "
- if ( set -ex ; . $_script ) &> $targetdir/log
- then
- echo "succeeded"
- _fail=0
- else
- log=log
- cat $targetdir/stderr >> $targetdir/log
- echo "=======================dmesg=================" >> $targetdir/log
- dmesg | tail -n 200 >> $targetdir/log
- if [ $exitonerror == 0 ]; then
- log=log-`basename $_script`
- mv $targetdir/log $logdir/$log
- fi
- echo "FAILED - see $logdir/$log for details"
- _fail=1
- fi
- if [ "$savelogs" == "1" ]; then
- cp $targetdir/log $logdir/$_basename.log
- fi
- if [ "$_fail" == "1" -a "$exitonerror" == "1" ]; then
- exit 1
- fi
- fi
+ _script=$1
+ _basename=`basename $_script`
+ if [ -f "$_script" ]
+ then
+ rm -f $targetdir/stderr
+ # stop all arrays, just incase some script left an array active.
+ $mdadm -Ssq 2> /dev/null
+ mdadm --zero $devlist 2> /dev/null
+ mdadm --zero $devlist 2> /dev/null
+ # this might have been reset: restore the default.
+ echo 2000 > /proc/sys/dev/raid/speed_limit_max
+ # source script in a subshell, so it has access to our
+ # namespace, but cannot change it.
+ echo -ne "$_script... "
+ if ( set -ex ; . $_script ) &> $targetdir/log
+ then
+ echo "succeeded"
+ _fail=0
+ else
+ log=log
+ cat $targetdir/stderr >> $targetdir/log
+ echo "=======================dmesg=================" >> $targetdir/log
+ dmesg | tail -n 200 >> $targetdir/log
+ if [ $exitonerror == 0 ]; then
+ log=log-`basename $_script`
+ mv $targetdir/log $logdir/$log
+ fi
+ echo "FAILED - see $logdir/$log for details"
+ _fail=1
+ fi
+ if [ "$savelogs" == "1" ]
+ then
+ cp $targetdir/log $logdir/$_basename.log
+ fi
+ if [ "$_fail" == "1" -a "$exitonerror" == "1" ]
+ then
+ exit 1
+ fi
+ fi
}
do_help() {
- echo "Usage: $0 [options]"
- echo " Options:"
- echo " --tests=<test1,test2,..> Comma separated list of tests to run"
- echo " --disable-multipath Disable any tests involving multipath"
- echo " --disable-integrity Disable slow tests of RAID[56] consistency"
- echo " --logdir=<directory> Directory to save logfiles in"
- echo " --save-logs Save all logs in <logdir>"
- echo " --keep-going Don't stop on error, ie. run all tests"
- echo " --dev=[loop|lvm|ram] Use loop devices (default), LVM, or RAM disk"
- echo " --volgroup=<name> LVM volume group for LVM test"
- echo " setup Setup test environment and exit"
- echo " cleanup Cleanup test environment"
- echo " <prefix> Run tests with <prefix>"
+ echo "Usage: $0 [options]"
+ echo " Options:"
+ echo " --tests=<test1,test2,..> Comma separated list of tests to run"
+ echo " --disable-multipath Disable any tests involving multipath"
+ echo " --disable-integrity Disable slow tests of RAID[56] consistency"
+ echo " --logdir=<directory> Directory to save logfiles in"
+ echo " --save-logs Save all logs in <logdir>"
+ echo " --keep-going Don't stop on error, ie. run all tests"
+ echo " --dev=[loop|lvm|ram] Use loop devices (default), LVM, or RAM disk"
+ echo " --volgroup=<name> LVM volume group for LVM test"
+ echo " setup Setup test environment and exit"
+ echo " cleanup Cleanup test environment"
+ echo " <prefix> Run tests with <prefix>"
}
parse_args() {
- for i in $*
- do
- case $i in
- [0-9]*)
- prefix=$i
- ;;
- setup)
- echo "mdadm test environment setup"
- do_setup
- trap 0; exit 0
- ;;
- cleanup)
- cleanup
- exit 0
- ;;
- --tests=*)
- TESTLIST=`expr "x$i" : 'x[^=]*=\(.*\)' | sed -e 's/,/ /g'`
- ;;
- --logdir=*)
- logdir=`expr "x$i" : 'x[^=]*=\(.*\)'`
- ;;
- --save-logs)
- savelogs=1
- ;;
- --keep-going | --no-error)
- exitonerror=0
- ;;
- --disable-multipath)
- unset MULTIPATH
- ;;
- --disable-integrity)
- unset INTEGRITY
- ;;
- --dev=loop)
- DEVTYPE=loop
- ;;
- --dev=lvm)
- DEVTYPE=lvm
- ;;
- --dev=ram)
- DEVTYPE=ram
- ;;
- --volgroup=*)
- LVM_VOLGROUP=`expr "x$i" : 'x[^=]*=\(.*\)'`
- ;;
- --help)
- do_help
- exit 0;
- ;;
- -*)
- echo " $0: Unknown argument: $i"
- do_help
- exit 0;
- ;;
- esac
-done
+ for i in $*
+ do
+ case $i in
+ [0-9]* )
+ prefix=$i
+ ;;
+ setup )
+ echo "mdadm test environment setup"
+ do_setup
+ trap 0
+ exit 0
+ ;;
+ cleanup )
+ cleanup
+ exit 0
+ ;;
+ --tests=* )
+ TESTLIST=`expr "x$i" : 'x[^=]*=\(.*\)' | sed -e 's/,/ /g'`
+ ;;
+ --logdir=* )
+ logdir=`expr "x$i" : 'x[^=]*=\(.*\)'`
+ ;;
+ --save-logs )
+ savelogs=1
+ ;;
+ --keep-going | --no-error )
+ exitonerror=0
+ ;;
+ --disable-multipath )
+ unset MULTIPATH
+ ;;
+ --disable-integrity )
+ unset INTEGRITY
+ ;;
+ --dev=loop )
+ DEVTYPE=loop
+ ;;
+ --dev=lvm )
+ DEVTYPE=lvm
+ ;;
+ --dev=ram )
+ DEVTYPE=ram
+ ;;
+ --volgroup=* )
+ LVM_VOLGROUP=`expr "x$i" : 'x[^=]*=\(.*\)'`
+ ;;
+ --help )
+ do_help
+ exit 0
+ ;;
+ -* )
+ echo " $0: Unknown argument: $i"
+ do_help
+ exit 0
+ ;;
+ esac
+ done
}
logdir=$targetdir
@@ -422,19 +474,21 @@ parse_args $@
do_setup
mkdir -p $logdir
-if [ "$savelogs" == "1" ]; then
- echo "Saving logs to $logdir"
+if [ "$savelogs" == "1" ]
+then
+ echo "Saving logs to $logdir"
fi
-if [ "x$TESTLIST" != "x" ]; then
- for script in $TESTLIST
- do
- do_test $testdir/$script
- done
+if [ "x$TESTLIST" != "x" ]
+then
+ for script in $TESTLIST
+ do
+ do_test $testdir/$script
+ done
else
- for script in $testdir/$prefix $testdir/$prefix*[^~]
- do
- do_test $script
- done
+ for script in $testdir/$prefix $testdir/$prefix*[^~]
+ do
+ do_test $script
+ done
fi
exit 0
--
2.7.4