You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
86 lines
2.8 KiB
86 lines
2.8 KiB
#ifndef _CREATE_FW_H_ |
|
#define _CREATE_FW_H_ |
|
#include "probe_roms.h" |
|
|
|
|
|
/* we are configuring for 2 SCUs */ |
|
static const int num_elements = 2; |
|
|
|
/* |
|
* For all defined arrays: |
|
* elements 0-3 are for SCU0, ports 0-3 |
|
* elements 4-7 are for SCU1, ports 0-3 |
|
* |
|
* valid configurations for one SCU are: |
|
* P0 P1 P2 P3 |
|
* ---------------- |
|
* 0xF,0x0,0x0,0x0 # 1 x4 port |
|
* 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1 |
|
* # ports |
|
* 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2 |
|
* # port |
|
* 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port |
|
* 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration) |
|
* |
|
* if there is a port/phy on which you do not wish to override the default |
|
* values, use the value assigned to UNINIT_PARAM (255). |
|
*/ |
|
|
|
/* discovery mode type (port auto config mode by default ) */ |
|
|
|
/* |
|
* if there is a port/phy on which you do not wish to override the default |
|
* values, use the value "0000000000000000". SAS address of zero's is |
|
* considered invalid and will not be used. |
|
*/ |
|
#ifdef MPC |
|
static const int mode_type = SCIC_PORT_MANUAL_CONFIGURATION_MODE; |
|
static const __u8 phy_mask[2][4] = { {1, 2, 4, 8}, |
|
{1, 2, 4, 8} }; |
|
static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000001ULL, |
|
0x5FCFFFFFF0000002ULL, |
|
0x5FCFFFFFF0000003ULL, |
|
0x5FCFFFFFF0000004ULL }, |
|
{ 0x5FCFFFFFF0000005ULL, |
|
0x5FCFFFFFF0000006ULL, |
|
0x5FCFFFFFF0000007ULL, |
|
0x5FCFFFFFF0000008ULL } }; |
|
#else /* APC (default) */ |
|
static const int mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; |
|
static const __u8 phy_mask[2][4]; |
|
static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFF00000001ULL, |
|
0x5FCFFFFF00000001ULL, |
|
0x5FCFFFFF00000001ULL, |
|
0x5FCFFFFF00000001ULL }, |
|
{ 0x5FCFFFFF00000002ULL, |
|
0x5FCFFFFF00000002ULL, |
|
0x5FCFFFFF00000002ULL, |
|
0x5FCFFFFF00000002ULL } }; |
|
#endif |
|
|
|
static const int cable_selection[2][4]; |
|
|
|
/* Maximum number of concurrent device spin up */ |
|
static const int max_num_concurrent_dev_spin_up = 1; |
|
|
|
/* enable of ssc operation */ |
|
/* |
|
* NOTE: also see probe_roms.h. This value can be set for ssc values. |
|
* Values can be set for: |
|
* ssc_sata_tx_spread_level |
|
* ssc_sas_tx_spread_level |
|
* ssc_sas_tx_type |
|
*/ |
|
static const __u8 enable_ssc; |
|
|
|
/* AFE_TX_AMP_CONTROL */ |
|
static const unsigned int afe_tx_amp_control0 = 0x000bdd08; |
|
static const unsigned int afe_tx_amp_control1 = 0x000ffc00; |
|
static const unsigned int afe_tx_amp_control2 = 0x000b7c09; |
|
static const unsigned int afe_tx_amp_control3 = 0x000afc6e; |
|
|
|
static const char blob_name[] = "isci_firmware.bin"; |
|
static const char sig[] = "ISCUOEMB"; |
|
static const unsigned char version = ISCI_ROM_VER_LATEST; |
|
|
|
#endif
|
|
|