This patch adds new firmware file for Intel Bluetooth 22161
Also it is known as Intel CyclonePeak (CcP).
FW Build: REL0246
Release Version: 21.0.0.4
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
SDSD-8797:
WLAN (SDIO) firmware version: W14.68.29.p59
Bluetooth (SDIO) firmware version: 14.68.29.p59
The combo image can be downloaded through either WLAN or
Bluetooth.
USBUSB-8797:
WLAN (USB) firmware version: W14.68.29.p60
Bluetooth (USB) firmware version: 14.68.29.p60
The combo image can be downloaded through WLAN only.
PCIEUART-8997:
WLAN (PCIE) firmware version: W16.68.1.p179
Bluetooth (UART) firmware version: 16.26.1.p179
The combo image can be downloaded through WLAN only.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
New in this release:
- Add support for Agilio LX cards
Improvements:
- Improve tunnel setup time in low traffic rate scenarios
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Tested-by: Charles Murcott <charles.murcott@netronome.com>
Acked-by: Simon Horman <simon.horman@netronome.com>
This patch updates the firmware file for Intel Bluetooth 8265
Also it is known as Intel WindStormPeak (WsP).
FW Build: REL0299
Release Version: 21.0.0.4
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth 9260
Also it is known as Intel ThunderPeak (THP).
FW Build: REL0420
Release Version: 21.0.0.4
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth 9560
Also it is known as Intel JeffersonPeak (JfP).
FW Build: REL0420
Release Version: 21.0.0.4
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
The file was sent to me by Max Chou <max.chou@realtek.com>.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Max Chou <max.chou@realtek.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
SDSD-8887:
WLAN (SDIO) firmware version: W15.68.7.p189
Bluetooth (SDIO) firmware version: 15.26.7.p189
The combo image can be downloaded through either WLAN or
Bluetooth.
SD-8801:
WLAN (SD8801) firmware version: W14.68.36.p204
These devices are WLAN only.
SDSD-8787:
WLAN (SDIO) firmware version: W14.68.35.p66
Bluetooth (SDIO) firmware version: 14.68.35.p66
The combo image can be downloaded through either WLAN or
Bluetooth.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
USB-USB8997:
WLAN (USB) firmware version: W16.68.1.p183
Bluetooth (USB) firmware version: 16.26.1.p183
Both WLAN and bluetooth are on USB interface.
The combo image will be downloaded through WLAN only.
PCIe-USB8897:
WLAN (PCIe) firmware version: W15.68.19.p21
Bluetooth (USB) firmware version: 15.28.19.p21
The combo image will be downloaded through WLAN only
PCIe8997:
WLAN (PCIe) firmware version: W16.68.1.p195
During PCIe reset, wifi-only firmware will be download to device
in case bluetooth part do not get affected.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Fixes DMAR errors that occurred when using the firmware
with DPDK applications.
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Tested-by: Brendan Galloway <brendan.galloway@netronome.com>
Acked-by: Edwin Peer <edwin.peer@netronome.com>
The following fw files are added to support QCA6174.
rampatch_00440302.bin: RAM DUMP
nvm_00440302.bin: NVRAM
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Add AMD Secure Encrypted Virtualization (SEV) firmware to allow for the
updating of the SEV firmware outside of BIOS releases. Naming convention
and directory structure follows the convention defined in the kernel
driver in drivers/crypto/ccp/psp-dev.c
SEV firmware files are to be placed in the "amd" directory and names
should follow the pattern: amd_sev_fam<FAMILY>h_model<MODEL>h.sbin
where FAMILY is the two-digit hexadecimal value of the target processor
family (e.g. 17)
where MODEL is the two-digit hexadecimal value of the target processor
model (e.g. 01) or where the least significant nibble of the two-digit
hexadecimal value can be an 'x' to indicate a range of models
(e.g. 0x for 00 to of).
The firmware provided is version 0.17 build 11 and is for AMD family
17h processors with models in the range 00h to 0fh.
Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Delete the reference to an amdgpu file that was removed, and fix
the missing quote for one of the raspberrypi files.
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth 9560
Also it is known as Intel JeffersonPeak (JfP).
FW Build: REL0395
Release Version: 20.110.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth 9260
Also it is known as Intel ThunderPeak (THP).
FW Build: REL0395
Release Version: 20.110.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
These NVIDIA-signed firmwares are required to enable the Cypress
Type-C controller on TU10x GPUs.
FW versions:
Secondary: 42
Primary: 3.1.10
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
This patch adds new FW for bnx2x, which adds the following:
- TX VLAN filtering support.
- Enable TPA only for packets without VLAN.
It also addresses few critical issues,
- Fairness algorithm misbehaviour when minimum bandwidth configured
for all PFs.
- Error recovery issue on TAPE devices.
- FW not discarding FIP frames that are not designated to PF.
- Kernel driver initialization failure after preboot driver.
- VxLAN stops working after sending inner IP fragmented traffic.
- Issues in the following FW flows:
SD VLAN update, TX packet drop, packet padding flow, vlan add/remove.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
WLAN (PCIe) firmware version: W16.68.1.p195
Bluetooth (USB) firmware version: 16.26.1.p195
In PCIe-USB chipset, WLAN is over PCIe whereas bluetooth is over
USB. The combo image will be downloaded through WLAN only.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
WLAN (SDIO) firmware version: W15.68.19.17
Bluetooth (SDIO) firmware version: 15.26.19.17
The combo image can be downloaded through either WLAN or
Bluetooth.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
WLAN (SDIO) firmware version: W16.68.1.p195
Bluetooth (SDIO) firmware version: 16.26.1.p195
Both WLAN and bluetooth are on SDIO interface.
The combo image can be downloaded either through WLAN or
Bluetooth.
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Hemantkumar Suthar <shemant@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
BCM43430 NVRAM config file for the RPi3 Model B was set to the value
found by brcmf_dmi_probe(), but should use the DT compatible.
Rename the file to actually make it work with the kernel driver.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
This patch updates the firmware file for Intel Bluetooth 8265
Also it is known as Intel WindStormPeak (WsP).
FW Build: REL0295
Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth 8260
also it is known as Intel Snowfield Peak (SfP)
FW Build: REL0522
Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth 9260
Also it is known as Intel ThunderPeak (THP).
FW Build: REL0386
Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth 9560
Also it is known as Intel JeffersonPeak (JfP).
FW Build: REL0386
Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add new versions of the firmwares for 9260 and 9000.
Build number: Core_build_core40-120
Revision numbers: 95eb4e97 (9260, 9000)
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Add a NVRAM file for the Ampak AP6330 Wifi/BT module as used on the
Prowise PT301 tablet. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Prowise PT301 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the Broadcom 43430 WiFi/BT chip as found on the
Chuwi Vi8 Plus tablet's mainboard. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Chuwi Vi8 Plus tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the Ampak AP6234 Wifi/BT module as used on the
Meegopad T08 HDMI stick. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Meegopad T08 HDMI stick.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the Ampak AP6212 Wifi/BT module as used on the
Jumper EZpad mini 3 tablet. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Jumper EZpad mini 3 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the Ampak AP6212 Wifi/BT module as used on the
ONDA V80 Plus tablet. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the ONDA V80 Plus tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the Ampak AP6356 Wifi/BT module as used in the
GPD win handheld. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the GPD win handheld.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Lemaker, the manufacturer of the Banana Pro board has always shipped
the NVRAM file from the Cubietech Cubietruck wifi for use with the
Ampak AP6181 43362 WiFi/BT module on the Banana Pro.
This commit adds a symlink from brcmfmac43362-sdio.lemaker,bananapro.txt
to brcm/brcmfmac43362-sdio.cubietech,cubietruck.txt to match this, making
the Wifi on the Banana Pro work OOTB.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Amit K Bag