Updated PID value to 3005 for devices with
sflash firmware.
Signed-off-by: Bala Shanmugam <sbalashanmugam@atheros.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
wl1271-fw-ap.bin is access point mode FW support to the wl12xx driver.
Access point uses a separate firmware from station and has a different
initialization sequence.
Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
These are the firmwares for the upcoming Fusion APUs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Update firmware for the Exar X3100 10Gbps adapters to version 1.8.1
Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
FW & NVS Support wl127x wireless LAN driver (wl1271 & wl1273).
In order to use those files copy them to target FS at /lib/firmware/.
Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Tested-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This adds version 1.5 of the firmware for i2400m based devices (Intel
Wireless WiMAX Connection 5x50) and adds support for the 6x50
series.
The 1.3 version is purged as it is was never supported by a released kernel.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Supports BCM4313, BCM43224, and BCM43225 chips.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
AR7010 firmwares are patched to change EP3 & EP4
from Interrupt to Bulk type.
These changes are compatible with older kernels.
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Add firmware for the Exar X3100 10Gbps aadapters
Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Add firmware for AR7010 chipsets supported
by the ath9k_htc driver.
More information at: http://wireless.kernel.org/en/users/Drivers/ath9k_htc
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Originally submitted by Ameen Rahman <ameen.rahman@qlogic.com>.
I've only converted the license file from DOS line endings to with unix
line endings, and adjusted it to fit in 80 columns.
Signed-off-by: dann frazier <dannf@hp.com>
Acked-by: Ameen Rahman <ameen.rahman@qlogic.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits)
phy/marvell: add 88ec048 support
igb: Program MDICNFG register prior to PHY init
e1000e: correct MAC-PHY interconnect register offset for 82579
hso: Add new product ID
can: Add driver for esd CAN-USB/2 device
l2tp: fix export of header file for userspace
can-raw: Fix skb_orphan_try handling
Revert "net: remove zap_completion_queue"
net: cleanup inclusion
phy/marvell: add 88e1121 interface mode support
u32: negative offset fix
net: Fix a typo from "dev" to "ndev"
igb: Use irq_synchronize per vector when using MSI-X
ixgbevf: fix null pointer dereference due to filter being set for VLAN 0
e1000e: Fix irq_synchronize in MSI-X case
e1000e: register pm_qos request on hardware activation
ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice
net: Add getsockopt support for TCP thin-streams
cxgb4: update driver version
cxgb4: add new PCI IDs
...
Manually fix up conflicts in:
- drivers/net/e1000e/netdev.c: due to pm_qos registration
infrastructure changes
- drivers/net/phy/marvell.c: conflict between adding 88ec048 support
and cleaning up the IDs
- drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req
conflict (registration change vs marking it static)
Extract the microcode for the QLogic QLE7220 series IB HCA and use the
kernel microcode request facility to load the microcode. This
supports Debian Linux's requirements to separate microcode which
doesn't have open source code available from the device driver.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
The following patch contains firmware for Multitech Systems' MT9234MU
and MT9234ZBA usb dialup fax modems. It has been provided to me by
Multitech Systems' support, and I converted the files to ihex format with
objcopy -I binary -O ihex <file.fw> <file.fw>.ihex
Signed-off-by: Alex Manoussakis <alex@juniper.net>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
New firmware fixes a performance regression on small packets.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Firmware for Intel 6000 Series Wi-Fi Adapters is version 9.193.4.1
Changelog:
- Sync with fixes from factory
- Fix CTKILL issue after resume
- Fix TC error resulting in NMI On 8KiB AMSDU frames required at
least 4KiB free space
- Fix for 6000 series cards with EEPROM
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Switch to the new firmware version (5.2.13).
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Increase FTQ depth to 256 to ehnabce performance.
- Fix RV2P context corruption on 5709 when flow control is enabled.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
License is redistributable but no RE or modification.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Bala Shanmugam