This new firmware fixes several bugs:
1. HW attention appears and traffic stops when iSCSI firmware tries to
retransmit iSCSI login command when the iSCSI login is carrying data
not aligned to 4-bytes.
2. FCoE traffic fails to run when running in switch-independent multi-function
mode and there's more than one interface supporting FCoE on a given port.
3. While two ports are running FCoE with at least one of them has a function
number (>1) on the same engine in a 4-port device a zeroed CQE is given,
causing FCoE traffic to stop.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
We should change these permissions unless there is a reason to keep them
executable.
Signed-off-by: Connor Behan <connor.behan@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This firmware is for a driver for the Realtek 8821AE PCI WIFI device.
It came from a tarball from Realtek named
wifi_driver_8821ae_0018.1129.2013.tar.gz and is allowed to be
distributed under the LICENCE.rtlwifi_firmware.txt license.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
[bwh: Fix filename in WHENCE]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Add new ucode files and update the WHENCE entry, also
bump the copyright date on the license.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This firmware is for a driver that will soon be submitted to the kernel.
It occurs as data statements in Realtek driver rtl8723A_WiFi_linux_v4.1.3_6044.20121224.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Emmanuel Grumbach says:
This is another pull request for another firmware. I am sorry not to
have put this together in the same pull request, but I just didn't know
when that new firmware would come out.
It doesn't replace the older one:
* iwlwifi-{7260,3160}-7.ucode is supported starting from 3.10
* iwlwifi-{7260,3160}-8.ucode is supported starting from 3.13
Add new firmware for devices: 7260 and 3160
version:
22.15.8.0
Supported by kernel 3.13 and up.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
This is the 3.2.3.0 firmware patch for Brocade 3.2.23.0 BFA and BNA drivers.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
fw and licence were taken from http://ldriver.qlogic.com/firmware/
Cc: Chad Dupuis <chad.dupuis@qlogic.com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: linux-driver@qlogic.com
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Acked-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This patch updates firmware patch files for following Intel Bluetooth devices:
- Intel Wireless Bluetooth 7260
- Intel Wireless Bluetooth 3160
This patch fixes
- sometimes device doesn't response to HCI_reset after multiple reboot
- issue with HCI stress testing
- issue with some multi profile cases
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This firmware file supports rev 2.2 of the CW1100/CW1200 family.
Signed-off-by: Jean Philippe PERRIN <j.p.perrin@st.com>
Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Commit b8e24bfabb03 ('emi62: use request_firmware()') made
emi62/bitstream.HEX a copy of emi26/bitstream.HEX. Re-do the
conversion from drivers/usb/misc/emi62_fw_{m,s}.h (these headers
contained the same bitstream but different firmware).
Reported-by: Monty <xiphmont@xiph.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WLAN (SDIO) firmware version: 15.69.2.p11
Bluetooth (SDIO) firmware version: 15.28.2.p11
The combo image can be downloaded through either WLAN or Bluetooth.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
WLAN (PCIe) firmware version: 15.69.2.p11
Bluetooth (USB) firmware version: 15.28.2.p11
The combo image will be downloaded through WLAN only.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
The vendor driver RTL8188EUS_linux_v4.1.4_6773.20130222 contains
firmware in the form of data statements. This info has been extracted
into a binary file.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The vendor driver rtl8188C_8192C_8192D_usb_linux_v3.4.2_3727.20120404
includes new firmware files. These were extracted from data statements
in that driver to form these files.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This patch adds firmware for the BCM4335 802.11ac SDIO chipset.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This firmware is intended for revision 4 and above of the BCM43241
SDIO 802.11n chipset.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This patch adds the firmware for the BCM43241 SDIO chipset, which
is a 2x2 802.11n device.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The firmware name used in brcmfmac for SDIO devices was named
generically as brcmfmac-sdio.bin. To use the brcmfmac SDIO driver
the user had to copy the appropriate firmware to brcmfmac-sdio.bin.
This turned out to be inconvenient for developers switching different
devices on their system so brcmfmac was changed to use chip specific
filenames according format brcmfmac<chipid>-sdio.bin. This patch renames
the existing SDIO firmware files to match this format.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This new firmware blob is used with the old wl1251
device whose driver has been in the kernel for quite
some time.
Cc: Luciano Coelho <luca@coelho.fi>
Cc: Pavel Machek <pavel@denx.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This patch adds firmware files for Brocade HBA and CNA drivers(BFA and BNA).
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Add new ucode files and update the WHENCE entry.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Add new ucode file and update the WHENCE entry. The
smc ucode is used by the power management controller
on the gpu.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This patch adds a firmware patch file for Intel Wireless (3160)
Bluetooth device.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Added version information for Intel Bluetooth device (7260) firmware
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Sagrad has granted permission to redistribute this file, which contains
calibration and initialization tables for for their WLAN modules.
Please note that the cw1200 driver still requires firmware files, which
are separately licensed by ST-E. When (if?) explicit permission is
obtained to redistribute the firmware, it will be added.
Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Adam Harriman <adam@sagrad.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This patch fixes incorrect filename described in the WHENCE
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Too many decimal to hex converstions of the USB product ID resulted in
the firmware files having the wrong name. Rename them, and update the
WHENCE file with the new names.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Add new ucode files and update the WHENCE entry.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Add new ucode files and update the WHENCE entry.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Add new ucode files and update WHENCE entry.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
For AMD Families 10h ~ 14h Processors
file: amd-ucode/microcode_amd.bin
md5sum: 55ae79b82cbfddcf7142058be3c9ec2d
For AMD Family 15h Processors
file: amd-ucode/microcode_amd_fam15h.bin
md5sum: 122ac7e56442c2b7c28eb26978b2d57c
Version: 07_10_2013
Signed-off-by: Sherry Hurwitz <sherry.hurwitz@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
[bwh: Include version in WHENCE and GPG signatures as separate files]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Add new firmware for new devices: 7260 and 3160
version:
22.0.7.0
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Hans Verkuil says:
The go7007 staging driver has been substantially overhauled for kernel 3.10.
As part of that process the firmware situation has been improved as well.
While Micronas allowed the firmware to be redistributed, it was never made
part of linux-firmware. Only the firmwares for the Sensoray S2250 were added
in the past, but those need the go7007*.bin firmwares as well to work.
This pull request collects all the firmwares necessary to support all the
go7007 devices into the go7007 directory. With this change the go7007 driver
will work out-of-the-box starting with kernel 3.10.
Hyong-Youb Kim