Suffix the FW file name with its version number.
The cxgb4 driver looks up t4fw.bin, so add this file as a symlink.
Signed-off-by: Divy Le Ray <divy@chelsio.com>
The brcmfmac driver located in drivers/net/wireless/brcm80211 has
been extended with support for USB devices. This patch adds firmware
for the bcm43236 device.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The nvram file contains configuration info for firmware which varies
with different hardware designs. The version currently in the
repository is for a Broadcom-internal development board that is not
available on the market. This file is not applicable for any exsisting
end-user product. Users should use the nvram file that was
shipped with their device to avoid unexpected or incorrect behavior.
Remove the file from repository to avoid confusion.
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This is the initial version of bcm4330 firmware of brcmfmac
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This patch adds new version of bcm4329 firmware image for brcmfmac
from 3.3 or later kernel.
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
v1.1 allows finer grained tuning of the SSC (spread-spectrum-clocking)
settings for SAS and SATA. See notes in probe_roms.h
v1.3 allows the attenuation of the attached cables to be specified to
the driver in terms of 'short', 'medium', and 'long' (see probe_roms.h).
These settings (per phy) are retrieved from the platform oem-parameters
(BIOS rom), the fallback firmware blob, or via a module parameter
override.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Most of the CIS files come from the pcmcia-cs project and are built
from a text format using the pack_cis tool.
In pcmcia-cs 3.2.8, apparently the last release, pack_cis had some
bugs that are fatal when it is built with a current gcc and glibc.
Therefore I refer to my own repackaged version that runs successfully
and generates exactly the same binaries included here.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
isci requires a parameter blob which is usually found in NVRAM, but it
can fall back to loading with request_firmware(). These files are
taken from the Linux source tree where they were wrongly added in
Linux 3.0.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
New firmware fixes iSCSI problems with some LeftHand targets that don't
set TTT=0xffffffff for Data-In according to spec. Firmware generates
exception warnings for this condition and becomes very slow. This is
fixed by suppressing these warnings when using default error mask.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
To fix bugs when running offloaded FCoE/iSCSI traffic in multiple
Class of Service environments. In some scenarios, traffic could stop
on certain rings and eventually all traffic would stop.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Export the blobs to linux-firmware; keep the previous versions]
Includes FCoE releated fixes in FW flows
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Export the blobs to linux-firmware]
57712 HW supported with same set of features as for 57710/57711
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Export the blob to linux-firmware]
This is the new FW HSI blob and the relevant definitions without logic changes.
It also included code adaptation for new HSI. New features are not enabled.
New FW/HSI includes:
- Support for 57712 HW
- Future support for VF (not used)
- Improvements in FW interrupts scheme
- FW FCoE hooks (stubs for future usage)
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Export the blobs to linux-firmware]
keyspan_pda.S has an out-of-range decimal constant that looks
like it was really meant to be a binary constant. Comparing
with the binary, it appears that as31 used to treat this as 0,
so change the source to use 0 and add a comment on this.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Some small amount of postprocessing is required after assembling
bootstrap.asm with a56. Add a script and makefile for this.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Includes fixes for the following issues:
1. (iSCSI) Arrival of un-solicited ASYNC message causes
firmware to abort the connection with RST.
2. (FCoE) There is a probability that truncated FCoE packet on
RX path won't get detected which might lead to FW assert.
3. (iSCSI) Arrival of target-initiated NOP-IN during intense
ISCSI traffic might lead to FW assert.
4. (iSCSI) Chip hangs when in case of retransmission not aligned
to 4-bytes from the beginning of iSCSI PDU.
5. (FCoE) Arrival of packets beyond task IO size can lead to crash.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This patch adds the inital version of newly formatted firmware
for ath6kl driver.
Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The new wl12xx fw (ver 7.3.0.0.77) had some major api changes.
The main change was the addition of multi-role concept.
For each chip there are two FW kind:
1) A single FW for both STA and AP roles
2) PLT FW that support calibration process
Update FW for WL128x chip to 7.3.0.0.77:
STA & AP FW version
PLT FW version
Update FW for WL127x chip 6.3.0.0.77:
STA & AP FW version
PLT FW version
Create a soft symbolic link wl12xx-nvs.bin that link to one of
the examples NVF files (by default wl127x)
Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Update FW for WL128x chip:
STA FW version 7.1.5.50.74
AP FW version 7.2.1.0.54
Update FW for WL127x chip:
STA FW version 6.1.5.50.74
AP FW version 6.2.1.0.54
Signed-off-by: Shahar Levi <shahar_levi@ti.com>
These blobs are released by the OLPC project, and drive Marvell
libertas chips. OLPC hardware has additional features and quirks,
which makes special firmware necessary. The 'lbtf' blobs are
thin firmware, which allows the Linux drivers more control over
the device's functionality.
The firmware was downloaded from
http://dev.laptop.org/pub/firmware/libertas/.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Move ENE UB6250 SD/MS card firmware from driver/staging/keucr, and
convert it from HEX to using request_firmware()
Most for this patch is from huajun.li.lee@gmail.com sent at
2011-03-02,only added the ms card reader firmware and LICENCE of
firmware from ENE.
Signed-off-by: Cho, Yu-Chen <acho@novell.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
New version 17.168.5.3
Changelog
- Add "low temperature" support
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The new AR3012 keeps same PID/VID after downloading the patch and
sysconfig files.
Signed-off-by: Steven.Li <yongli@qca.qualcomm.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The drxk driver allows a per-device firmware, as it seems to
be required. Terratec granted us permission to use the firmware
found at H5 for their devices. Add it to the linux-firmware tree.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Divy Le Ray