This version firmware resolved HBR2 Compliance Test failed, and improved
compatibility by adjusting the phy configuration. Improved stability of
HDCP.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
From internal commit:
c7c36e204eda9715ae70f8c5b1a7bec636ef7f56
Fixes version number.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
From internal commit:
c7c36e204eda9715ae70f8c5b1a7bec636ef7f56
Fixes version number.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
From internal commit:
c7c36e204eda9715ae70f8c5b1a7bec636ef7f56
Fixes version number.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
- Say that new files must, not 'should', be listed in WHENCE
- State the expected form of a reference to a separate licence file
- Mention 'make check'
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
These were added in commits 4069643008, 9693ff6d74.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Fix filename 'intel/dsp_fw_bxtn.bin'. List all the files and their
versions, not just the symlinks. Delete the non-standard 'md5sum'
fields.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Vinod Koul <vinod.koul@intel.com>
The 'sources' appear to be the names of ihex files, not actual source
code, and in any case those files are not included in this repository.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The script compares the files listed in WHENCE (or otherwise expected)
and the files known to git, and reports all differences as errors.
Add a 'check' rule to the Makefile that runs this.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This patch releases firmware for the BCM43430 and BCM43438 chipset. The
latter is found on the Raspberry Pi 3.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Firmware version for these images is 16.68.1.p70
PCIe-USB and PCIe-UART are two variant of PCIe8997 chipset in which WLAN
is over PCIe whereas bluetooth can be over USB or UART bus.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Add platform data for channel tuning on Intel OPA HFI adapter 100 series
Signed-off-by: John Fleck <john.fleck@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
This device is a new model from Realtek. Updates to driver btrtl will
soon be submitted to the kernel.
These files were provided by the Realtek developer.
Signed-off-by: 陆朱伟 <alex_lu@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-bluetooth@vger.kernel.org
[bwh: Fixed the filename wildcard in WHENCE]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
rt3071.bin is a copy of the second firmware image in rt2870.bin,
used only by the old rt2870sta driver.
Update it to version 0.36.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
QCA9984 is a new chip supported by ath10k. Firmware version is 10.4-3.2-00072.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
QCA9888 is a new chip supported by ath10k. Firmware version is 10.4-3.2-00072.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
QCA9887 is a new chip supported by ath10k. Firmware version is 10.2.4-1.0-00013.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
QCA4019 is a new chip supported by ath10k. Firmware version is 10.4-3.2.1-00028.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This new firmware for the qed* adpaters fixes several issues:
- Better blocking of malicious VFs.
- After FLR, Tx-switching [internal routing] of packets might
be incorrect.
- Deletion of unicast MAC filters would sometime have side-effect
of corrupting the MAC filters configred for a device.
It also contains fixes for future qed* drivers that *hopefully* would be
sent for review in the near future.
In addition, it would allow driver some new functionality, including:
- Allowing PF/VF driver compaitibility with old drivers [running
pre-8.10.5.0 firmware].
- Better debug facilities.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware files for R-Car H3 and M3-W to fix
the device detection issue.
The md5sum of the files are:
645db7e9056029efa15f158e51cc8a11 r8a779x_usb3_v2.dlmem
687d5d42f38f9850f8d5a6071dca3109 r8a779x_usb3_v3.dlmem
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This updates Broxton audio dsp firmware to latest version
The version of this firmware release is 9.22.00.1118
The md5sum of this firmware binary is 469dfcf5b2ebbc58505a0cca23303723
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This updates Kabylake audio dsp firmware to latest version.
The version of this firmware release is 9.21.00.1037
The md5sum of this firmware binary is e71a2421565fadae228b3924d9510bcb.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
1.26 is the stable and recommended firmware for Skylake.
However one conflict in i915 accidentally restored 1.23
making that the default in some kernel out there.
So, let's restore this 1.23 here.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97182
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This updates Skylake audio dsp firmware, this version contains update to
support setting of multiple coefficients with one large IPC.
The version of this firmware release is 8.20.00.958.
The md5sum of this firmware binary is 02bd300f5ef85ae04afffd7c0ef50c46.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Update firmware to v2.6, it support standby, controlled by mailbox
commend. And update the licence.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
The firmware source (alongside with the usbduxsigma.c)
was updated in 2015 during a major rewrite but
its binary was still the old one which caused the
kernel driver to fail. This fix provides the matching
firmware binary. This was created by invoking
"make -f Makefile_dux" which creates the firmware binary.
Signed-off-by: tech@linux-usb-daq.co.uk
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This dptx firmware is required by rk3399 Type-C DisplayPort controller.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This adds Kabylake audio dsp firmware
The version of this firmware release is 9.21.00.701
The md5sum of this firmware binary is 7d937bb2919031a8a4ed5427b5e6a108
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Chris Zhong