The firmware was only ever referenced in the 6.0 kernel by
two firmware, for less than a month, by the 6.1 LTS kernel
those references had been updated to the new location.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
The firmware 3.16.1 has been released the 2023-05-02.
Here the last modifications (only modifications tagged [LMAC] have an
impact on Linux):
* [1670] - [LMAC] Fixed support for WDS 4 address frames
* [1813] - [LMAC] Fixed an error that was causing the scan complete
indication to be blocked
* [1832] - [UMAC] Fixed an issue blocking connection to specific Asus
routers
* [1820] - [UMAC] Added a new API to obtain Wi-Fi diagnostics
information
* [1825] - [UMAC] The TX rate mask can be applied in AP mode
* [1822] - [UMAC] Fixed an error that was causing access point packets
to be encrypted multiple times
* [1800] - [UMAC] Add an API to forward probe request when running in
AP mode
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Due to changes in the HuC auth flow via GuC, both binaries need to be
updated at the same time to keep compatibility.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
This patch updates the firmware file for Intel Bluetooth AX203
Also it is known as Intel JohnsonPeak (JnP2).
FW Build: REL67068
Release Version: 22.240.0.2
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth AX203
Also it is known as Intel JohnsonPeak (JnP2).
FW Build: REL67068
Release Version: 22.240.0.2
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth AX211
Also it is known as Intel GarfieldPeak (GfP2).
FW Build: REL67068
Release Version: 22.240.0.2
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth AX211
Also it is known as Intel GarfieldPeak (GfP2).
FW Build: REL67068
Release Version: 22.240.0.2
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth AX210
Also it is known as Intel TyphoonPeak (TyP2).
FW Build: REL67068
Release Version: 22.240.0.2
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth AX200
Also it is known as Intel CyclonePeak (CcP2).
FW Build: REL53454
Release Version: 22.240.0.2
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth AX201
Also it is known as Intel HarrisonPeak (HrP2).
FW Build: REL53454
Release Version: 22.240.0.2
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add the -83 ucode firmwares for the currently supported hardware and
update the PNVM binaries.
Build number: Core_build_core80-39
Revision: e8f84e98 (so, ty)
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
The kernel has supported compressed firmware for quite some time. So
let's add a couple of targets to produce that. In practical terms this
means it we'll use ~5x times less space on disk.
Reportedly the amd ucode, needs to be uncompressed _within_ the
initrd in order to work. Using compressed ucode in late load just works.
Ideally this will be addressed by the initrd generators, but considering
the files are tiny in size let's skip the compression.
v2
- commit message, skip compression for files annotated as Raw
v3
- rebase
[Drop extra verbose statement in zstd case, Josh Boyer
<jwboyer@kernel.org>]
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware version for WILC1000
FW version: 16.0
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Update ice DDP wireless_edge package file to the latest version: 1.3.10.0
Highlight of changes since 1.3.7.0:
- Provide Separate IP Fragment Packet Type Groups for Receive Side Scaling (RSS)
- Add support to allow Receive Side Scaling (RSS) and Flow Director (FD) on Multicast packets
Signed-off-by: Shekhar Deb <shekhar.deb@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Commit: 244d6b5c2f ("cirrus: Add firmware for new Asus ROG Laptops") added
several Link: entries for cirrus firmwares, but as link and target exists in
the same directory, the extra "cirrus/" path gets them created as broken
symlinks.
Fix it up by removing the extra "cirrus/" path.
Signed-off-by: Thomas Backlund <tmb@tmb.nu>
Fixes: 244d6b5c2f ("cirrus: Add firmware for new Asus ROG Laptops")
Reported-by: Bit Twister2 <bittwister2@gmail.com>
Reported-by: David GEIGER <geiger.david68210@gmail.com>
Cc: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: Josh Boyer <jwboyer@kernel.org>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
The Qualcomm SDM845 platform has a modem-less version, called SDA845.
It still has the modem DSP, which is used for WiFi, GNSS, etc. The
firmware in the qcom/sdm845 dir comes from the Thundercomm RB3 board,
which internally has the SDA845 SoC rather than the full SDM845.
The SC8180X platform (not yet added to linux-firmware) started using
modem.mbn and modem_nm.mbn, the latter being used for no-modem
platforms.
Follow this example and rename qcom/sdm845/modem.mbn firmware
file to modem_nm.mbn. This commit adds a compatibility link for now, to
let the device trees to be adapted to this change. It should be removed
when the proper qcom/sdm845/modem.mbn is submitted.
Cc: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add the modem DSP firmware for the Qualcomm APQ8016 boards. The files
come from the redistributable linux-board-support-package-r1036.1.zip
for the Dragonboard 410c. The file modem.mbn and wcnss.mbn files wer
generated from segment files using the pil-squasher tool.
Cc: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There are a number of Pine64 devices which all use the same wireless
chipset, so add symlinks for those modules/(base)boards:
- Pine64 RockPro64 v2.0 and v2.1 (via adapter board)
- Pine64 RK3566 Quartz64-A Board (via adapter board)
- Pine64 PineNote v1.1 and v1.2
- PINE64 RK3566 SOQuartz on Model A carrier board
- Pine64 RK3566 SoQuartz with CM4-IO Carrier Board
- PINE64 RK3566 SOQuartz on Blade carrier board
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Tested-by: Maximilian Weigand <mweigand@mweigand.net>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
A major regression was reported on commit 60dc78a7 ("amdgpu: update GC
11.0.1 firmware for amd.5.5 release") where Phoenix integrated GPUs
aren't able to boot up with `amdgpu` loaded.
This is fixed internal commit 8b27b052488cee45b453dcab6d034bb80a964e61.
To avoid another regression from a mismatch, pull in a whole snapshot
of all GC firmware at this commit instead of just the one file.
Reported-by: Adrien Aubry
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2575
Fixes: 60dc78a7 ("amdgpu: update GC 11.0.1 firmware for amd.5.5 release")
Fixes: 31f8f526 ("amdgpu: update GC 11.0.4 firmware for amd.5.5 release")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Based on internal git commit:
360b8377aa1224f44056e0c8e0ab4f8d92cab021
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Based on internal git commit:
360b8377aa1224f44056e0c8e0ab4f8d92cab021
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Update ice DDP comms package file to the latest version: 1.3.40.0
Highlight of changes since 1.3.31.0:
- Add support for Security Group Tag (SGT) header
- Provide Separate IP Fragment Packet Type Groups for Receive Side Scaling (RSS)
- Add support to allow Receive Side Scaling (RSS) and Flow Director (FD) on Multicast packets
- Add support for parsing SGT-PPPoE packets
- Add support for PPPoE version 2
Signed-off-by: Shekhar Deb <shekhar.deb@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
rtl8xxxu supports this chip now.
The firmware was extracted from the vendor driver
v5.8.6.2_35538.20191028_COEX20190910-0d02 from
https://github.com/BrightX/rtl8192fu.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
It seems this fixes some issues with rtl8xxxu in monitor mode.
r8188eu from kernel 6.2.5 still works with this new firmware.
This firmware was extracted from the vendor driver v5.2.2.4 from
https://github.com/lwfinger/rtl8188eu/blob/v5.2.2.4/hal8188e_t_fw.c
Also, move the entry in WHENCE under the rtl8xxxu driver, because
that's the driver which handles this chip from kernel 6.3 onwards.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217205
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Gustavo Sousa