Main changes:
- add initial L3 support
- changed a bit the way of events sending
- changed ABI for some IPC calls
- add LAG support
This firmware version is ABI un-compatible with the current 2.0,
so add it as separate binary.
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Mickey Rachamim <mickeyr@marvell.com>
On 21/04/2021 13:23, Josh Boyer wrote:
> On Mon, Apr 19, 2021 at 1:38 PM Michel Piquemal <spam@ipik.org> wrote:
>>
>> Raspberry Pi Zero W has no NVRAM files specified and dmesg reports the
>> following error at boot:
>> brcmfmac mmc1:0001:1: Direct firmware load for
>> brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2
>>
>> Pi Zero W uses same wifi BCM43430 module than Pi 3 model B:
>> symlinking to that Pi 3b NVRAM file fixes the issue, and wifi works as
>> expected.
>>
> Your patch is corrupted and doesn't apply. Please update your local
> tree to the latest in git and resend.
>
> josh
>
Hi. Apologies it got mangled by mail client; here it is again:
Signed-off-by: Michel Piquemal <spam@ipik.org>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add latest verified version of Mellanox Spectrum-family switch firmware,
for Spectrum (13.2008.2438), Spectrum-2 (29.2008.2438) and Spectrum-3
(30.2008.2438).
This update fixes the following issues:
- An issue where strictly-prioritized traffic gets a 9usec latency penalty
on a congested port.
- Attempts to configure DSCP prioritization (QPDM register) on CPU
port (local port 0) would result in FW crash.
- An issue in sampling traffic to the CPU due to incorrect trap
prioritization.
- An issue in bulk-reading flow counters.
- Several issues related to FW upgrade and in-service FW upgrade.
- Incomplete clearing of activity bits in ECMP containers with a very high
number of individual ECMP entries (100K).
- A crash during router deinit.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
The kernel when booted in ACPI mode with SMBIOS/DMI
data uses the DMI data to set the machine
manufacture/model.
The WiFi driver uses the machine string to select the
correct firmware image. Because of this, an additional
link to select the correct firmware is needed.
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Peter Robinson <pbrobinson@gmail.com>
Cc: Josh Boyer <jwboyer@kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch adds new firmware file for Intel Bluetooth AX201
Also it is known as Intel HarrisonPeak (HrP)
FW Build: REL23303
Release Version: 22.50.0.2
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
New in this release:
- Support for ipv6 tunneling
- Handling of QinQ matching/actions
Improvements:
- Fix for performance regression under overload conditions
- Better handling of tunnel flow-merge cases
- Fix performance regression when tso is enabled with ipv6 traffic
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Tested-by: Charles Murcott <charles.murcott@netronome.com>
Reviewed-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Some x86/ACPI devices such as the Acer Aspire Switch 10E (SW3-016),
use an alternative ACPI hardware-id (HID) for the BT part of the
RTL8723BS chip.
Instead of using the standard OBDA8723 HID this device uses a HID
of OBDA0623. Despite using a different HID it does work fine with
the default config settings from the rtl8723bs_config-OBDA8723.bin
file. Add a symlink to that file, to fix BT not working on this
device due to a missing config file.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the brcmfmac43430a0 wifi/bit chip found on the
Chuw Hi8 (CWI509) tablet. This is based on copy of the existing
brcm/brcmfmac43430a0-sdio.jumper-ezpad-mini3.txt NVRAM file with some
the calibration values adjusted for the Chuwi Hi8 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the brcmfmac43340 wifi/bit chip found on the
predia-basic tablet. This is based on copy of the existing
brcm/brcmfmac43340-sdio.meegopad-t08.txt NVRAM file with some the
calibration values adjusted for the Predia Basic tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Update remoteproc firmware to the following versions:
- ADSP.HT.5.3.c2-00058-SM8250-3
- CDSP.HT.2.3.c1-00060-SM8250-2
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Update A650 SQE firmware to version 0.99 providing security fixes. At
the same time update A650 ZAP shader firmware.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Rob Clark <robdclark@gmail.com>
smagar