As demonstrated by the inability to use existing WCN6750 firmware on
QCM6490 / QCS6490 devices, such firmware files are device-specific. As a
preparation to adding more device-specific firmware, move existing
firmware to the sc7280/ subdir, squashing it in proceess. Squashing it
simplifies loading (as it requires just a single file access / userspace
call) and also it requires just a single compatibility symlink instead
of ten.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This version is required to support ARL-H.
Release: 102.1.15.1926
Compatibility (API) Version: 1.0
SVN: 1
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
This firmware was extracted from the vendor driver
rtl8192FU_rtl8725AU_WiFi_linux_v5.15.2-53-g9bfbc74cf.20230615_COEX20220422-2b07
provided by Realtek developer.
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
This patch adds the firmware files for the Cirrus CS35L56 smart
amplifier used in a Lenovo laptop.
- 17aa380e
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
This patch adds the firmware files for the Cirrus CS35L56 smart
amplifier used in two ASUS laptops.
- 10431e13
- 10431f43
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Using link-to-a-link reduces legibility and changes to the root link,
also changes the leafs. Where the latter may be undesired and in some
cases just wrong.
We have a couple of instances in-tree, so fix them up and ban the
combination.
One particularly good example, why we'd want this is:
https://gitlab.com/kernel-firmware/linux-firmware/-/merge_requests/272
In there we have the following:
File: ti/tas2781/TAS2XXX1EB30.bin
[snip]
Link: TAS2XXX1EB3.bin -> ti/tas2781/TAS2XXX1EB3.bin
Link: ti/tas2781/TAS2XXX1EB3.bin -> TAS2XXX1EB30.bin
Link: TAS2XXX1EB30.bin -> ti/tas2781/TAS2XXX1EB30.bin
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This allows compatibility with old and new TAS drivers.
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
The new rtl8192du driver will support this chip.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Add below required Bluetooth firmware files for Qualcomm SoC WCN785x
which uses UART as HCI transport, and the firmware version is 2.0.1-00349.
qca/hmtbtfw20.tlv : RAMPATCH
qca/hmtnv20.b10f : NVM
qca/hmtnv20.b112 : NVM
qca/hmtnv20.bin : NVM
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
The FriendlyElec NanoPi M4 has a AP6356S WiFi/BT module
so we can reuse the NVRAM like devices with the same
module.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Add the secure firmware and also update the following gpu firmwares:
qcom/a660_gmu.bin: v3.01.0B
qcom/a660_sqe.fw: v1.12
qcom/qcm6490/a660_zap.mbn: v0.09
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Add the following gpu related firmwares for SA8775P chipset:
qcom/a663_gmu.bin: v3.05.01
qcom/sa8775p/a663_zap.mbn: v0.09
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
* Fix disconnect from AP after resuming from wowlan mode.
* Add rtw8922a_fw-2.bin for format change of RX DCK
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Qcom jsons must not be compressed.
Fixes: 541f96c0fa ("qcom: qcm6490: add ADSP and CDSP firmware")
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Add Linux firmware to be used for Qualcomm QCM6490 IDP and
Qualcomm RB3 Gen 2 Development Kit. Most of the firmware files are
common, IPA block is only present on the QCM6490 hardware.
- ADSP.HT.5.5.c8-00149-KODIAK-1
- CDSP.HT.2.5.c3-00077-KODIAK-1
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This patch adds the firmware files for the Cirrus CS35L54 smart
amplifier used in two HP laptops.
- 103c8d01
- 103c8d08
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Linux kernels before 6.6 used qcom/vpu-1.0/venus.mdt as a firmware
filename for Qualcomm SM8250 devices. Commit 36db650dae ("qcom: update
path for video firmware for vpu-1/2/3.0") moved the VPU firmware, added
the venus.mbn compatibility symlink, but at the same time it dropped
the venus.mdt symlink. Bring the historical name back to restore
compatibility with kernels older than 6.6.
Fixes: 36db650dae ("qcom: update path for video firmware for vpu-1/2/3.0")
Cc: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Fixed v0.35.18 TX/RX throughput reduction problem.
Fix WATCH_DOG SER happened in the suspend flow of net-detect function.
Use format-1 because of new register address of WoWLAN reason, and firmware
commmand format changed of hardware scan and RF calibration notification.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
This firmware/config is submitted for RTL8922A BT USB I/F.
Version: 0x04fa9428
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
These files come from the RealtekBluetoothUartPackage_2.17.119.0525 file
which can be downloaded from realtek.com. The download is marked as version
1.0.245.3 / 05/08/2017 on the download page
The added rtl_bt/rtl8723cs_xx_fw.bin file is called
rtl8723c_mp_bt40_fw_asic_rom_patch.bin in the download.
The configuration file for the RTL8723BS part also works for the
CS variant so we add the appropriate link to use that.
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
A number of the rtl_bt files are identical according to sha256sum
so let's de-dupe them, and also remove a couple of entries in
the WHENCE file that are duplicates while we're at it.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
The setting works for numerous rtl8723 series of devices so let's use
the default naming so it works by default everywhere and link the
device specific names to the generic config.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Update AMD SEV firmware to version 0.24 build 20 for AMD family 17h processors
with models in the range 30h to 3fh.
Update AMD SEV firmware to version 1.55 build 21 for AMD family 19h processors
with models in the range 00h to 0fh.
Update AMD SEV firmware to version 1.55 build 37 for AMD family 19h processors
with models in the range 10h to 1fh.
Add AMD SEV firmware version 1.55 build 37 for AMD family 19h processors with
models in the range a0h to afh.
Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This reverts commit 8a9be67bd7.
We detected a regression associated with MTL DMC v2.22. So let's revert
it back to v2.21 until we have a new release with the fix.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
- Rename qcom/vpu-3.0/ to qcom/vpu/ to have common sub-folder for
new firmware files.
- Move firmware files from vpu-1.0/ and vpu-2.0/ to vpu/ with
proper names for firmware binaries and provide backwards-compatible
links.
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Refine WoWLAN function, such as security and PNO.
Add register and power tables as known as fw elements.
Use format-1 because of new register address of WoWLAN reason and addition
of fw_elements.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
MTL FW 2.22
Date : 04/02/2024
Notes:
1. Checking Power Well Status before pushing the Registers Data to Debug Queue
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
This version is required to support ARL-S.
Release: 102.0.10.1878
Compatibility (API) Version: 1.0
SVN: 1
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
First GSC release for LNL.
Release: 104.0.0.1161
Compatibility (API) Version: 1.0
SVN: 1
The firmware file is named after the compatibility version, as that is
what the kernel driver cares about.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
This reverts commit ef7be90bbb.
An unexpected API change went in these firmwaress, that isn't actually
compatible with all drivers supporting this API version.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Fix the license issue for tas781 firmware, which are shipped as .bin
opaque. Remove the GPL-2+, which imposes having the source code
available.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
The ZAP shader is signed and is specific for the particular SoC. As such
it should be put the corresponding subdir rather than the topdir.
Move it to the subdir (like all other zap.mbn files).
Cc: Akhil P Oommen <quic_akhilpo@quicinc.com>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To be used on Qualcomm Snapdragon SM8550 based boards.
- VIDEO.VPU.3.1-0076
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add the following gpu related firmwares for Snapdragon X1 Elite
chipset (x1e80100):
qcom/gen70500_gmu.bin: v4.03.11
qcom/gen70500_sqe.fw: v1.62
qcom/gen70500_zap.mbn: v0.15
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Add firmware images for Intel QAT 402xx crypto/compression accelerators.
This firmware is taken from Intel QuickAssist Technology Hardware
Version 2.0 package QAT20.L.1.2.30-00013.
Firmware version: 1.2.40
Release notes for this firmware are reported at [1].
$ sha256sum qat_402*
b82b6faf0d1da97b78d2ec3b78cbdb3f769cbb1339227b82025d0f2ca4857037 qat_402xx.bin
e08d6fa7ee7079e6eaa06f1b92dbfcf7cc60f8a6ec6894710ec1001388bd6d57 qat_402xx_mmp.bin
Link: https://intel.github.io/quickassist/RN/In-Tree/index.html [1]
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
The topology file defines stream layout for a single unidirectional
playback endpoint.
Binary equivalent of the XML source in the avs-topology-xml repository.
Commit 7b96469d2891 ("i2s: Add SSM4567 topology").
Link: 7b96469d28
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Akhil P Oommen