You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
404 lines
12 KiB
404 lines
12 KiB
git-rebase(1) |
|
============= |
|
|
|
NAME |
|
---- |
|
git-rebase - Forward-port local commits to the updated upstream head |
|
|
|
SYNOPSIS |
|
-------- |
|
[verse] |
|
'git-rebase' [-i | --interactive] [-v | --verbose] [-m | --merge] |
|
[-s <strategy> | --strategy=<strategy>] |
|
[-C<n>] [ --whitespace=<option>] [-p | --preserve-merges] |
|
[--onto <newbase>] <upstream> [<branch>] |
|
'git-rebase' --continue | --skip | --abort |
|
|
|
DESCRIPTION |
|
----------- |
|
If <branch> is specified, git-rebase will perform an automatic |
|
`git checkout <branch>` before doing anything else. Otherwise |
|
it remains on the current branch. |
|
|
|
All changes made by commits in the current branch but that are not |
|
in <upstream> are saved to a temporary area. This is the same set |
|
of commits that would be shown by `git log <upstream>..HEAD`. |
|
|
|
The current branch is reset to <upstream>, or <newbase> if the |
|
--onto option was supplied. This has the exact same effect as |
|
`git reset --hard <upstream>` (or <newbase>). |
|
|
|
The commits that were previously saved into the temporary area are |
|
then reapplied to the current branch, one by one, in order. Note that |
|
any commits in HEAD which introduce the same textual changes as a commit |
|
in HEAD..<upstream> are omitted (i.e., a patch already accepted upstream |
|
with a different commit message or timestamp will be skipped). |
|
|
|
It is possible that a merge failure will prevent this process from being |
|
completely automatic. You will have to resolve any such merge failure |
|
and run `git rebase --continue`. Another option is to bypass the commit |
|
that caused the merge failure with `git rebase --skip`. To restore the |
|
original <branch> and remove the .dotest working files, use the command |
|
`git rebase --abort` instead. |
|
|
|
Assume the following history exists and the current branch is "topic": |
|
|
|
------------ |
|
A---B---C topic |
|
/ |
|
D---E---F---G master |
|
------------ |
|
|
|
From this point, the result of either of the following commands: |
|
|
|
|
|
git-rebase master |
|
git-rebase master topic |
|
|
|
would be: |
|
|
|
------------ |
|
A'--B'--C' topic |
|
/ |
|
D---E---F---G master |
|
------------ |
|
|
|
The latter form is just a short-hand of `git checkout topic` |
|
followed by `git rebase master`. |
|
|
|
If the upstream branch already contains a change you have made (e.g., |
|
because you mailed a patch which was applied upstream), then that commit |
|
will be skipped. For example, running `git-rebase master` on the |
|
following history (in which A' and A introduce the same set of changes, |
|
but have different committer information): |
|
|
|
------------ |
|
A---B---C topic |
|
/ |
|
D---E---A'---F master |
|
------------ |
|
|
|
will result in: |
|
|
|
------------ |
|
B'---C' topic |
|
/ |
|
D---E---A'---F master |
|
------------ |
|
|
|
Here is how you would transplant a topic branch based on one |
|
branch to another, to pretend that you forked the topic branch |
|
from the latter branch, using `rebase --onto`. |
|
|
|
First let's assume your 'topic' is based on branch 'next'. |
|
For example feature developed in 'topic' depends on some |
|
functionality which is found in 'next'. |
|
|
|
------------ |
|
o---o---o---o---o master |
|
\ |
|
o---o---o---o---o next |
|
\ |
|
o---o---o topic |
|
------------ |
|
|
|
We would want to make 'topic' forked from branch 'master', |
|
for example because the functionality 'topic' branch depend on |
|
got merged into more stable 'master' branch, like this: |
|
|
|
------------ |
|
o---o---o---o---o master |
|
| \ |
|
| o'--o'--o' topic |
|
\ |
|
o---o---o---o---o next |
|
------------ |
|
|
|
We can get this using the following command: |
|
|
|
git-rebase --onto master next topic |
|
|
|
|
|
Another example of --onto option is to rebase part of a |
|
branch. If we have the following situation: |
|
|
|
------------ |
|
H---I---J topicB |
|
/ |
|
E---F---G topicA |
|
/ |
|
A---B---C---D master |
|
------------ |
|
|
|
then the command |
|
|
|
git-rebase --onto master topicA topicB |
|
|
|
would result in: |
|
|
|
------------ |
|
H'--I'--J' topicB |
|
/ |
|
| E---F---G topicA |
|
|/ |
|
A---B---C---D master |
|
------------ |
|
|
|
This is useful when topicB does not depend on topicA. |
|
|
|
A range of commits could also be removed with rebase. If we have |
|
the following situation: |
|
|
|
------------ |
|
E---F---G---H---I---J topicA |
|
------------ |
|
|
|
then the command |
|
|
|
git-rebase --onto topicA~5 topicA~3 topicA |
|
|
|
would result in the removal of commits F and G: |
|
|
|
------------ |
|
E---H'---I'---J' topicA |
|
------------ |
|
|
|
This is useful if F and G were flawed in some way, or should not be |
|
part of topicA. Note that the argument to --onto and the <upstream> |
|
parameter can be any valid commit-ish. |
|
|
|
In case of conflict, git-rebase will stop at the first problematic commit |
|
and leave conflict markers in the tree. You can use git diff to locate |
|
the markers (<<<<<<) and make edits to resolve the conflict. For each |
|
file you edit, you need to tell git that the conflict has been resolved, |
|
typically this would be done with |
|
|
|
|
|
git add <filename> |
|
|
|
|
|
After resolving the conflict manually and updating the index with the |
|
desired resolution, you can continue the rebasing process with |
|
|
|
|
|
git rebase --continue |
|
|
|
|
|
Alternatively, you can undo the git-rebase with |
|
|
|
|
|
git rebase --abort |
|
|
|
OPTIONS |
|
------- |
|
<newbase>:: |
|
Starting point at which to create the new commits. If the |
|
--onto option is not specified, the starting point is |
|
<upstream>. May be any valid commit, and not just an |
|
existing branch name. |
|
|
|
<upstream>:: |
|
Upstream branch to compare against. May be any valid commit, |
|
not just an existing branch name. |
|
|
|
<branch>:: |
|
Working branch; defaults to HEAD. |
|
|
|
--continue:: |
|
Restart the rebasing process after having resolved a merge conflict. |
|
|
|
--abort:: |
|
Restore the original branch and abort the rebase operation. |
|
|
|
--skip:: |
|
Restart the rebasing process by skipping the current patch. |
|
|
|
-m, \--merge:: |
|
Use merging strategies to rebase. When the recursive (default) merge |
|
strategy is used, this allows rebase to be aware of renames on the |
|
upstream side. |
|
|
|
-s <strategy>, \--strategy=<strategy>:: |
|
Use the given merge strategy; can be supplied more than |
|
once to specify them in the order they should be tried. |
|
If there is no `-s` option, a built-in list of strategies |
|
is used instead (`git-merge-recursive` when merging a single |
|
head, `git-merge-octopus` otherwise). This implies --merge. |
|
|
|
-v, \--verbose:: |
|
Display a diffstat of what changed upstream since the last rebase. |
|
|
|
-C<n>:: |
|
Ensure at least <n> lines of surrounding context match before |
|
and after each change. When fewer lines of surrounding |
|
context exist they all must match. By default no context is |
|
ever ignored. |
|
|
|
--whitespace=<nowarn|warn|error|error-all|strip>:: |
|
This flag is passed to the `git-apply` program |
|
(see linkgit:git-apply[1]) that applies the patch. |
|
|
|
-i, \--interactive:: |
|
Make a list of the commits which are about to be rebased. Let the |
|
user edit that list before rebasing. This mode can also be used to |
|
split commits (see SPLITTING COMMITS below). |
|
|
|
-p, \--preserve-merges:: |
|
Instead of ignoring merges, try to recreate them. This option |
|
only works in interactive mode. |
|
|
|
include::merge-strategies.txt[] |
|
|
|
NOTES |
|
----- |
|
When you rebase a branch, you are changing its history in a way that |
|
will cause problems for anyone who already has a copy of the branch |
|
in their repository and tries to pull updates from you. You should |
|
understand the implications of using 'git rebase' on a repository that |
|
you share. |
|
|
|
When the git rebase command is run, it will first execute a "pre-rebase" |
|
hook if one exists. You can use this hook to do sanity checks and |
|
reject the rebase if it isn't appropriate. Please see the template |
|
pre-rebase hook script for an example. |
|
|
|
Upon completion, <branch> will be the current branch. |
|
|
|
INTERACTIVE MODE |
|
---------------- |
|
|
|
Rebasing interactively means that you have a chance to edit the commits |
|
which are rebased. You can reorder the commits, and you can |
|
remove them (weeding out bad or otherwise unwanted patches). |
|
|
|
The interactive mode is meant for this type of workflow: |
|
|
|
1. have a wonderful idea |
|
2. hack on the code |
|
3. prepare a series for submission |
|
4. submit |
|
|
|
where point 2. consists of several instances of |
|
|
|
a. regular use |
|
1. finish something worthy of a commit |
|
2. commit |
|
b. independent fixup |
|
1. realize that something does not work |
|
2. fix that |
|
3. commit it |
|
|
|
Sometimes the thing fixed in b.2. cannot be amended to the not-quite |
|
perfect commit it fixes, because that commit is buried deeply in a |
|
patch series. That is exactly what interactive rebase is for: use it |
|
after plenty of "a"s and "b"s, by rearranging and editing |
|
commits, and squashing multiple commits into one. |
|
|
|
Start it with the last commit you want to retain as-is: |
|
|
|
git rebase -i <after-this-commit> |
|
|
|
An editor will be fired up with all the commits in your current branch |
|
(ignoring merge commits), which come after the given commit. You can |
|
reorder the commits in this list to your heart's content, and you can |
|
remove them. The list looks more or less like this: |
|
|
|
------------------------------------------- |
|
pick deadbee The oneline of this commit |
|
pick fa1afe1 The oneline of the next commit |
|
... |
|
------------------------------------------- |
|
|
|
The oneline descriptions are purely for your pleasure; `git-rebase` will |
|
not look at them but at the commit names ("deadbee" and "fa1afe1" in this |
|
example), so do not delete or edit the names. |
|
|
|
By replacing the command "pick" with the command "edit", you can tell |
|
`git-rebase` to stop after applying that commit, so that you can edit |
|
the files and/or the commit message, amend the commit, and continue |
|
rebasing. |
|
|
|
If you want to fold two or more commits into one, replace the command |
|
"pick" with "squash" for the second and subsequent commit. If the |
|
commits had different authors, it will attribute the squashed commit to |
|
the author of the first commit. |
|
|
|
In both cases, or when a "pick" does not succeed (because of merge |
|
errors), the loop will stop to let you fix things, and you can continue |
|
the loop with `git rebase --continue`. |
|
|
|
For example, if you want to reorder the last 5 commits, such that what |
|
was HEAD~4 becomes the new HEAD. To achieve that, you would call |
|
`git-rebase` like this: |
|
|
|
---------------------- |
|
$ git rebase -i HEAD~5 |
|
---------------------- |
|
|
|
And move the first patch to the end of the list. |
|
|
|
You might want to preserve merges, if you have a history like this: |
|
|
|
------------------ |
|
X |
|
\ |
|
A---M---B |
|
/ |
|
---o---O---P---Q |
|
------------------ |
|
|
|
Suppose you want to rebase the side branch starting at "A" to "Q". Make |
|
sure that the current HEAD is "B", and call |
|
|
|
----------------------------- |
|
$ git rebase -i -p --onto Q O |
|
----------------------------- |
|
|
|
|
|
SPLITTING COMMITS |
|
----------------- |
|
|
|
In interactive mode, you can mark commits with the action "edit". However, |
|
this does not necessarily mean that 'git rebase' expects the result of this |
|
edit to be exactly one commit. Indeed, you can undo the commit, or you can |
|
add other commits. This can be used to split a commit into two: |
|
|
|
- Start an interactive rebase with 'git rebase -i <commit>^', where |
|
<commit> is the commit you want to split. In fact, any commit range |
|
will do, as long as it contains that commit. |
|
|
|
- Mark the commit you want to split with the action "edit". |
|
|
|
- When it comes to editing that commit, execute 'git reset HEAD^'. The |
|
effect is that the HEAD is rewound by one, and the index follows suit. |
|
However, the working tree stays the same. |
|
|
|
- Now add the changes to the index that you want to have in the first |
|
commit. You can use linkgit:git-add[1] (possibly interactively) and/or |
|
linkgit:git-gui[1] to do that. |
|
|
|
- Commit the now-current index with whatever commit message is appropriate |
|
now. |
|
|
|
- Repeat the last two steps until your working tree is clean. |
|
|
|
- Continue the rebase with 'git rebase --continue'. |
|
|
|
If you are not absolutely sure that the intermediate revisions are |
|
consistent (they compile, pass the testsuite, etc.) you should use |
|
linkgit:git-stash[1] to stash away the not-yet-committed changes |
|
after each commit, test, and amend the commit if fixes are necessary. |
|
|
|
|
|
Authors |
|
------ |
|
Written by Junio C Hamano <junkio@cox.net> and |
|
Johannes E. Schindelin <johannes.schindelin@gmx.de> |
|
|
|
Documentation |
|
-------------- |
|
Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. |
|
|
|
GIT |
|
--- |
|
Part of the linkgit:git[7] suite
|
|
|