You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
187 lines
7.1 KiB
187 lines
7.1 KiB
Git Protocol Capabilities |
|
========================= |
|
|
|
Servers SHOULD support all capabilities defined in this document. |
|
|
|
On the very first line of the initial server response of either |
|
receive-pack and upload-pack the first reference is followed by |
|
a NUL byte and then a list of space delimited server capabilities. |
|
These allow the server to declare what it can and cannot support |
|
to the client. |
|
|
|
Client will then send a space separated list of capabilities it wants |
|
to be in effect. The client MUST NOT ask for capabilities the server |
|
did not say it supports. |
|
|
|
Server MUST diagnose and abort if capabilities it does not understand |
|
was sent. Server MUST NOT ignore capabilities that client requested |
|
and server advertised. As a consequence of these rules, server MUST |
|
NOT advertise capabilities it does not understand. |
|
|
|
The 'report-status' and 'delete-refs' capabilities are sent and |
|
recognized by the receive-pack (push to server) process. |
|
|
|
The 'ofs-delta' capability is sent and recognized by both upload-pack |
|
and receive-pack protocols. |
|
|
|
All other capabilities are only recognized by the upload-pack (fetch |
|
from server) process. |
|
|
|
multi_ack |
|
--------- |
|
|
|
The 'multi_ack' capability allows the server to return "ACK obj-id |
|
continue" as soon as it finds a commit that it can use as a common |
|
base, between the client's wants and the client's have set. |
|
|
|
By sending this early, the server can potentially head off the client |
|
from walking any further down that particular branch of the client's |
|
repository history. The client may still need to walk down other |
|
branches, sending have lines for those, until the server has a |
|
complete cut across the DAG, or the client has said "done". |
|
|
|
Without multi_ack, a client sends have lines in --date-order until |
|
the server has found a common base. That means the client will send |
|
have lines that are already known by the server to be common, because |
|
they overlap in time with another branch that the server hasn't found |
|
a common base on yet. |
|
|
|
For example suppose the client has commits in caps that the server |
|
doesn't and the server has commits in lower case that the client |
|
doesn't, as in the following diagram: |
|
|
|
+---- u ---------------------- x |
|
/ +----- y |
|
/ / |
|
a -- b -- c -- d -- E -- F |
|
\ |
|
+--- Q -- R -- S |
|
|
|
If the client wants x,y and starts out by saying have F,S, the server |
|
doesn't know what F,S is. Eventually the client says "have d" and |
|
the server sends "ACK d continue" to let the client know to stop |
|
walking down that line (so don't send c-b-a), but it's not done yet, |
|
it needs a base for x. The client keeps going with S-R-Q, until a |
|
gets reached, at which point the server has a clear base and it all |
|
ends. |
|
|
|
Without multi_ack the client would have sent that c-b-a chain anyway, |
|
interleaved with S-R-Q. |
|
|
|
thin-pack |
|
--------- |
|
|
|
This capability means that the server can send a 'thin' pack, a pack |
|
which does not contain base objects; if those base objects are available |
|
on client side. Client requests 'thin-pack' capability when it |
|
understands how to "thicken" it by adding required delta bases making |
|
it self-contained. |
|
|
|
Client MUST NOT request 'thin-pack' capability if it cannot turn a thin |
|
pack into a self-contained pack. |
|
|
|
|
|
side-band, side-band-64k |
|
------------------------ |
|
|
|
This capability means that server can send, and client understand multiplexed |
|
progress reports and error info interleaved with the packfile itself. |
|
|
|
These two options are mutually exclusive. A modern client always |
|
favors 'side-band-64k'. |
|
|
|
Either mode indicates that the packfile data will be streamed broken |
|
up into packets of up to either 1000 bytes in the case of 'side_band', |
|
or 65520 bytes in the case of 'side_band_64k'. Each packet is made up |
|
of a leading 4-byte pkt-line length of how much data is in the packet, |
|
followed by a 1-byte stream code, followed by the actual data. |
|
|
|
The stream code can be one of: |
|
|
|
1 - pack data |
|
2 - progress messages |
|
3 - fatal error message just before stream aborts |
|
|
|
The "side-band-64k" capability came about as a way for newer clients |
|
that can handle much larger packets to request packets that are |
|
actually crammed nearly full, while maintaining backward compatibility |
|
for the older clients. |
|
|
|
Further, with side-band and its up to 1000-byte messages, it's actually |
|
999 bytes of payload and 1 byte for the stream code. With side-band-64k, |
|
same deal, you have up to 65519 bytes of data and 1 byte for the stream |
|
code. |
|
|
|
The client MUST send only maximum of one of "side-band" and "side- |
|
band-64k". Server MUST diagnose it as an error if client requests |
|
both. |
|
|
|
ofs-delta |
|
--------- |
|
|
|
Server can send, and client understand PACKv2 with delta refering to |
|
its base by position in pack rather than by an obj-id. That is, they can |
|
send/read OBJ_OFS_DELTA (aka type 6) in a packfile. |
|
|
|
shallow |
|
------- |
|
|
|
This capability adds "deepen", "shallow" and "unshallow" commands to |
|
the fetch-pack/upload-pack protocol so clients can request shallow |
|
clones. |
|
|
|
no-progress |
|
----------- |
|
|
|
The client was started with "git clone -q" or something, and doesn't |
|
want that side band 2. Basically the client just says "I do not |
|
wish to receive stream 2 on sideband, so do not send it to me, and if |
|
you did, I will drop it on the floor anyway". However, the sideband |
|
channel 3 is still used for error responses. |
|
|
|
include-tag |
|
----------- |
|
|
|
The 'include-tag' capability is about sending annotated tags if we are |
|
sending objects they point to. If we pack an object to the client, and |
|
a tag object points exactly at that object, we pack the tag object too. |
|
In general this allows a client to get all new annotated tags when it |
|
fetches a branch, in a single network connection. |
|
|
|
Clients MAY always send include-tag, hardcoding it into a request when |
|
the server advertises this capability. The decision for a client to |
|
request include-tag only has to do with the client's desires for tag |
|
data, whether or not a server had advertised objects in the |
|
refs/tags/* namespace. |
|
|
|
Servers MUST pack the tags if their referrant is packed and the client |
|
has requested include-tags. |
|
|
|
Clients MUST be prepared for the case where a server has ignored |
|
include-tag and has not actually sent tags in the pack. In such |
|
cases the client SHOULD issue a subsequent fetch to acquire the tags |
|
that include-tag would have otherwise given the client. |
|
|
|
The server SHOULD send include-tag, if it supports it, regardless |
|
of whether or not there are tags available. |
|
|
|
report-status |
|
------------- |
|
|
|
The upload-pack process can receive a 'report-status' capability, |
|
which tells it that the client wants a report of what happened after |
|
a packfile upload and reference update. If the pushing client requests |
|
this capability, after unpacking and updating references the server |
|
will respond with whether the packfile unpacked successfully and if |
|
each reference was updated successfully. If any of those were not |
|
successful, it will send back an error message. See pack-protocol.txt |
|
for example messages. |
|
|
|
delete-refs |
|
----------- |
|
|
|
If the server sends back the 'delete-refs' capability, it means that |
|
it is capable of accepting a zero-id value as the target |
|
value of a reference update. It is not sent back by the client, it |
|
simply informs the client that it can be sent zero-id values |
|
to delete references.
|
|
|