cb9daf16db
The commit-graph file format specifies that the chunks may be in any order. However, if the OID Lookup chunk happens to be the last one in the file, then any command attempting to access the commit-graph data will fail with: fatal: invalid commit position. commit-graph is likely corrupt In this case the error is wrong, the commit-graph file does conform to the specification, but the parsing of the Chunk Lookup table is a bit buggy, and leaves the field holding the number of commits in the commit-graph zero-initialized. The number of commits in the commit-graph is determined while parsing the Chunk Lookup table, by dividing the size of the OID Lookup chunk with the hash size. However, the Chunk Lookup table doesn't actually store the size of the chunks, but it stores their starting offset. Consequently, the size of a chunk can only be calculated by subtracting the starting offsets of that chunk from the offset of the subsequent chunk, or in case of the last chunk from the offset recorded in the terminating label. This is currenly implemented in a bit complicated way: as we iterate over the entries of the Chunk Lookup table, we check the ID of each chunk and store its starting offset, then we check the ID of the last seen chunk and calculate its size using its previously saved offset if necessary (at the moment it's only necessary for the OID Lookup chunk). Alas, while parsing the Chunk Lookup table we only interate through the "real" chunks, but never look at the terminating label, thus don't even check whether it's necessary to calulate the size of the last chunk. Consequently, if the OID Lookup chunk is the last one, then we don't calculate its size and turn don't run the piece of code determining the number of commits in the commit graph, leaving the field holding that number unchanged (i.e. zero-initialized), eventually triggering the sanity check in load_oid_from_graph(). Fix this by iterating through all entries in the Chunk Lookup table, including the terminating label. Note that this is the minimal fix, suitable for the maintenance track. A better fix would be to simplify how the chunk sizes are calculated, but that is a more invasive change, less suitable for 'maint', so that will be done in later patches. This additional flexibility of scanning more chunks breaks a test for "git commit-graph verify" so alter that test to mutate the commit-graph to have an even lower chunk count. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> |
||
|---|---|---|
| .github | ||
| Documentation | ||
| block-sha1 | ||
| builtin | ||
| ci | ||
| compat | ||
| contrib | ||
| ewah | ||
| git-gui | ||
| gitk-git | ||
| gitweb | ||
| mergetools | ||
| negotiator | ||
| perl | ||
| po | ||
| ppc | ||
| refs | ||
| sha1collisiondetection@855827c583 | ||
| sha1dc | ||
| sha256 | ||
| t | ||
| templates | ||
| trace2 | ||
| vcs-svn | ||
| xdiff | ||
| .cirrus.yml | ||
| .clang-format | ||
| .editorconfig | ||
| .gitattributes | ||
| .gitignore | ||
| .gitmodules | ||
| .mailmap | ||
| .travis.yml | ||
| .tsan-suppressions | ||
| CODE_OF_CONDUCT.md | ||
| COPYING | ||
| GIT-VERSION-GEN | ||
| INSTALL | ||
| LGPL-2.1 | ||
| Makefile | ||
| README.md | ||
| RelNotes | ||
| abspath.c | ||
| aclocal.m4 | ||
| add-interactive.c | ||
| add-interactive.h | ||
| add-patch.c | ||
| advice.c | ||
| advice.h | ||
| alias.c | ||
| alias.h | ||
| alloc.c | ||
| alloc.h | ||
| apply.c | ||
| apply.h | ||
| archive-tar.c | ||
| archive-zip.c | ||
| archive.c | ||
| archive.h | ||
| argv-array.c | ||
| argv-array.h | ||
| attr.c | ||
| attr.h | ||
| azure-pipelines.yml | ||
| banned.h | ||
| base85.c | ||
| bisect.c | ||
| bisect.h | ||
| blame.c | ||
| blame.h | ||
| blob.c | ||
| blob.h | ||
| bloom.c | ||
| bloom.h | ||
| branch.c | ||
| branch.h | ||
| builtin.h | ||
| bulk-checkin.c | ||
| bulk-checkin.h | ||
| bundle.c | ||
| bundle.h | ||
| cache-tree.c | ||
| cache-tree.h | ||
| cache.h | ||
| chdir-notify.c | ||
| chdir-notify.h | ||
| check-builtins.sh | ||
| check_bindir | ||
| checkout.c | ||
| checkout.h | ||
| color.c | ||
| color.h | ||
| column.c | ||
| column.h | ||
| combine-diff.c | ||
| command-list.txt | ||
| commit-graph.c | ||
| commit-graph.h | ||
| commit-reach.c | ||
| commit-reach.h | ||
| commit-slab-decl.h | ||
| commit-slab-impl.h | ||
| commit-slab.h | ||
| commit.c | ||
| commit.h | ||
| common-main.c | ||
| config.c | ||
| config.h | ||
| config.mak.dev | ||
| config.mak.in | ||
| config.mak.uname | ||
| configure.ac | ||
| connect.c | ||
| connect.h | ||
| connected.c | ||
| connected.h | ||
| convert.c | ||
| convert.h | ||
| copy.c | ||
| credential-cache--daemon.c | ||
| credential-cache.c | ||
| credential-store.c | ||
| credential.c | ||
| credential.h | ||
| csum-file.c | ||
| csum-file.h | ||
| ctype.c | ||
| daemon.c | ||
| date.c | ||
| decorate.c | ||
| decorate.h | ||
| delta-islands.c | ||
| delta-islands.h | ||
| delta.h | ||
| detect-compiler | ||
| diff-delta.c | ||
| diff-lib.c | ||
| diff-no-index.c | ||
| diff.c | ||
| diff.h | ||
| diffcore-break.c | ||
| diffcore-delta.c | ||
| diffcore-order.c | ||
| diffcore-pickaxe.c | ||
| diffcore-rename.c | ||
| diffcore.h | ||
| dir-iterator.c | ||
| dir-iterator.h | ||
| dir.c | ||
| dir.h | ||
| editor.c | ||
| entry.c | ||
| environment.c | ||
| exec-cmd.c | ||
| exec-cmd.h | ||
| fast-import.c | ||
| fetch-negotiator.c | ||
| fetch-negotiator.h | ||
| fetch-pack.c | ||
| fetch-pack.h | ||
| fmt-merge-msg.h | ||
| fsck.c | ||
| fsck.h | ||
| fsmonitor.c | ||
| fsmonitor.h | ||
| fuzz-commit-graph.c | ||
| fuzz-pack-headers.c | ||
| fuzz-pack-idx.c | ||
| generate-cmdlist.sh | ||
| gettext.c | ||
| gettext.h | ||
| git-add--interactive.perl | ||
| git-archimport.perl | ||
| git-bisect.sh | ||
| git-compat-util.h | ||
| git-cvsexportcommit.perl | ||
| git-cvsimport.perl | ||
| git-cvsserver.perl | ||
| git-difftool--helper.sh | ||
| git-filter-branch.sh | ||
| git-instaweb.sh | ||
| git-merge-octopus.sh | ||
| git-merge-one-file.sh | ||
| git-merge-resolve.sh | ||
| git-mergetool--lib.sh | ||
| git-mergetool.sh | ||
| git-p4.py | ||
| git-parse-remote.sh | ||
| git-quiltimport.sh | ||
| git-rebase--preserve-merges.sh | ||
| git-request-pull.sh | ||
| git-send-email.perl | ||
| git-sh-i18n.sh | ||
| git-sh-setup.sh | ||
| git-submodule.sh | ||
| git-svn.perl | ||
| git-web--browse.sh | ||
| git.c | ||
| git.rc | ||
| gpg-interface.c | ||
| gpg-interface.h | ||
| graph.c | ||
| graph.h | ||
| grep.c | ||
| grep.h | ||
| hash.h | ||
| hashmap.c | ||
| hashmap.h | ||
| help.c | ||
| help.h | ||
| hex.c | ||
| http-backend.c | ||
| http-fetch.c | ||
| http-push.c | ||
| http-walker.c | ||
| http.c | ||
| http.h | ||
| ident.c | ||
| imap-send.c | ||
| interdiff.c | ||
| interdiff.h | ||
| iterator.h | ||
| json-writer.c | ||
| json-writer.h | ||
| khash.h | ||
| kwset.c | ||
| kwset.h | ||
| levenshtein.c | ||
| levenshtein.h | ||
| line-log.c | ||
| line-log.h | ||
| line-range.c | ||
| line-range.h | ||
| linear-assignment.c | ||
| linear-assignment.h | ||
| list-objects-filter-options.c | ||
| list-objects-filter-options.h | ||
| list-objects-filter.c | ||
| list-objects-filter.h | ||
| list-objects.c | ||
| list-objects.h | ||
| list.h | ||
| ll-merge.c | ||
| ll-merge.h | ||
| lockfile.c | ||
| lockfile.h | ||
| log-tree.c | ||
| log-tree.h | ||
| ls-refs.c | ||
| ls-refs.h | ||
| mailinfo.c | ||
| mailinfo.h | ||
| mailmap.c | ||
| mailmap.h | ||
| match-trees.c | ||
| mem-pool.c | ||
| mem-pool.h | ||
| merge-blobs.c | ||
| merge-blobs.h | ||
| merge-recursive.c | ||
| merge-recursive.h | ||
| merge.c | ||
| mergesort.c | ||
| mergesort.h | ||
| midx.c | ||
| midx.h | ||
| name-hash.c | ||
| notes-cache.c | ||
| notes-cache.h | ||
| notes-merge.c | ||
| notes-merge.h | ||
| notes-utils.c | ||
| notes-utils.h | ||
| notes.c | ||
| notes.h | ||
| object-store.h | ||
| object.c | ||
| object.h | ||
| oidmap.c | ||
| oidmap.h | ||
| oidset.c | ||
| oidset.h | ||
| pack-bitmap-write.c | ||
| pack-bitmap.c | ||
| pack-bitmap.h | ||
| pack-check.c | ||
| pack-objects.c | ||
| pack-objects.h | ||
| pack-revindex.c | ||
| pack-revindex.h | ||
| pack-write.c | ||
| pack.h | ||
| packfile.c | ||
| packfile.h | ||
| pager.c | ||
| parse-options-cb.c | ||
| parse-options.c | ||
| parse-options.h | ||
| patch-delta.c | ||
| patch-ids.c | ||
| patch-ids.h | ||
| path.c | ||
| path.h | ||
| pathspec.c | ||
| pathspec.h | ||
| pkt-line.c | ||
| pkt-line.h | ||
| preload-index.c | ||
| pretty.c | ||
| pretty.h | ||
| prio-queue.c | ||
| prio-queue.h | ||
| progress.c | ||
| progress.h | ||
| promisor-remote.c | ||
| promisor-remote.h | ||
| prompt.c | ||
| prompt.h | ||
| protocol.c | ||
| protocol.h | ||
| quote.c | ||
| quote.h | ||
| range-diff.c | ||
| range-diff.h | ||
| reachable.c | ||
| reachable.h | ||
| read-cache.c | ||
| rebase-interactive.c | ||
| rebase-interactive.h | ||
| rebase.c | ||
| rebase.h | ||
| ref-filter.c | ||
| ref-filter.h | ||
| reflog-walk.c | ||
| reflog-walk.h | ||
| refs.c | ||
| refs.h | ||
| refspec.c | ||
| refspec.h | ||
| remote-curl.c | ||
| remote-testsvn.c | ||
| remote.c | ||
| remote.h | ||
| replace-object.c | ||
| replace-object.h | ||
| repo-settings.c | ||
| repository.c | ||
| repository.h | ||
| rerere.c | ||
| rerere.h | ||
| resolve-undo.c | ||
| resolve-undo.h | ||
| revision.c | ||
| revision.h | ||
| run-command.c | ||
| run-command.h | ||
| send-pack.c | ||
| send-pack.h | ||
| sequencer.c | ||
| sequencer.h | ||
| serve.c | ||
| serve.h | ||
| server-info.c | ||
| setup.c | ||
| sh-i18n--envsubst.c | ||
| sha1-array.c | ||
| sha1-array.h | ||
| sha1-file.c | ||
| sha1-lookup.c | ||
| sha1-lookup.h | ||
| sha1-name.c | ||
| sha1dc_git.c | ||
| sha1dc_git.h | ||
| shallow.c | ||
| shell.c | ||
| shortlog.h | ||
| sideband.c | ||
| sideband.h | ||
| sigchain.c | ||
| sigchain.h | ||
| split-index.c | ||
| split-index.h | ||
| stable-qsort.c | ||
| strbuf.c | ||
| strbuf.h | ||
| streaming.c | ||
| streaming.h | ||
| string-list.c | ||
| string-list.h | ||
| sub-process.c | ||
| sub-process.h | ||
| submodule-config.c | ||
| submodule-config.h | ||
| submodule.c | ||
| submodule.h | ||
| symlinks.c | ||
| tag.c | ||
| tag.h | ||
| tar.h | ||
| tempfile.c | ||
| tempfile.h | ||
| thread-utils.c | ||
| thread-utils.h | ||
| tmp-objdir.c | ||
| tmp-objdir.h | ||
| trace.c | ||
| trace.h | ||
| trace2.c | ||
| trace2.h | ||
| trailer.c | ||
| trailer.h | ||
| transport-helper.c | ||
| transport-internal.h | ||
| transport.c | ||
| transport.h | ||
| tree-diff.c | ||
| tree-walk.c | ||
| tree-walk.h | ||
| tree.c | ||
| tree.h | ||
| unicode-width.h | ||
| unimplemented.sh | ||
| unix-socket.c | ||
| unix-socket.h | ||
| unpack-trees.c | ||
| unpack-trees.h | ||
| upload-pack.c | ||
| upload-pack.h | ||
| url.c | ||
| url.h | ||
| urlmatch.c | ||
| urlmatch.h | ||
| usage.c | ||
| userdiff.c | ||
| userdiff.h | ||
| utf8.c | ||
| utf8.h | ||
| varint.c | ||
| varint.h | ||
| version.c | ||
| version.h | ||
| versioncmp.c | ||
| walker.c | ||
| walker.h | ||
| wildmatch.c | ||
| wildmatch.h | ||
| worktree.c | ||
| worktree.h | ||
| wrap-for-bin.sh | ||
| wrapper.c | ||
| write-or-die.c | ||
| ws.c | ||
| wt-status.c | ||
| wt-status.h | ||
| xdiff-interface.c | ||
| xdiff-interface.h | ||
| zlib.c | ||
README.md
Git - fast, scalable, distributed revision control system
Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals.
Git is an Open Source project covered by the GNU General Public License version 2 (some parts of it are under different licenses, compatible with the GPLv2). It was originally written by Linus Torvalds with help of a group of hackers around the net.
Please read the file INSTALL for installation instructions.
Many Git online resources are accessible from https://git-scm.com/ including full documentation and Git related tools.
See Documentation/gittutorial.txt to get started, then see
Documentation/giteveryday.txt for a useful minimum set of commands, and
Documentation/git-<commandname>.txt for documentation of each command.
If git has been correctly installed, then the tutorial can also be
read with man gittutorial or git help tutorial, and the
documentation of each command with man git-<commandname> or git help <commandname>.
CVS users may also want to read Documentation/gitcvs-migration.txt
(man gitcvs-migration or git help cvs-migration if git is
installed).
The user discussion and development of Git take place on the Git mailing list -- everyone is welcome to post bug reports, feature requests, comments and patches to git@vger.kernel.org (read Documentation/SubmittingPatches for instructions on patch submission). To subscribe to the list, send an email with just "subscribe git" in the body to majordomo@vger.kernel.org. The mailing list archives are available at https://lore.kernel.org/git/, http://marc.info/?l=git and other archival sites.
Issues which are security relevant should be disclosed privately to the Git Security mailing list git-security@googlegroups.com.
The maintainer frequently sends the "What's cooking" reports that list the current status of various development topics to the mailing list. The discussion following them give a good reference for project status, development direction and remaining tasks.
The name "git" was given by Linus Torvalds when he wrote the very first version. He described the tool as "the stupid content tracker" and the name as (depending on your mood):
- random three-letter combination that is pronounceable, and not actually used by any common UNIX command. The fact that it is a mispronunciation of "get" may or may not be relevant.
- stupid. contemptible and despicable. simple. Take your pick from the dictionary of slang.
- "global information tracker": you're in a good mood, and it actually works for you. Angels sing, and a light suddenly fills the room.
- "goddamn idiotic truckload of sh*t": when it breaks