You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
584 lines
19 KiB
584 lines
19 KiB
A tutorial introduction to git (for version 1.5.1 or newer) |
|
=========================================================== |
|
|
|
This tutorial explains how to import a new project into git, make |
|
changes to it, and share changes with other developers. |
|
|
|
If you are instead primarily interested in using git to fetch a project, |
|
for example, to test the latest version, you may prefer to start with |
|
the first two chapters of link:user-manual.html[The Git User's Manual]. |
|
|
|
First, note that you can get documentation for a command such as "git |
|
diff" with: |
|
|
|
------------------------------------------------ |
|
$ man git-diff |
|
------------------------------------------------ |
|
|
|
It is a good idea to introduce yourself to git with your name and |
|
public email address before doing any operation. The easiest |
|
way to do so is: |
|
|
|
------------------------------------------------ |
|
$ git config --global user.name "Your Name Comes Here" |
|
$ git config --global user.email you@yourdomain.example.com |
|
------------------------------------------------ |
|
|
|
|
|
Importing a new project |
|
----------------------- |
|
|
|
Assume you have a tarball project.tar.gz with your initial work. You |
|
can place it under git revision control as follows. |
|
|
|
------------------------------------------------ |
|
$ tar xzf project.tar.gz |
|
$ cd project |
|
$ git init |
|
------------------------------------------------ |
|
|
|
Git will reply |
|
|
|
------------------------------------------------ |
|
Initialized empty Git repository in .git/ |
|
------------------------------------------------ |
|
|
|
You've now initialized the working directory--you may notice a new |
|
directory created, named ".git". |
|
|
|
Next, tell git to take a snapshot of the contents of all files under the |
|
current directory (note the '.'), with gitlink:git-add[1]: |
|
|
|
------------------------------------------------ |
|
$ git add . |
|
------------------------------------------------ |
|
|
|
This snapshot is now stored in a temporary staging area which git calls |
|
the "index". You can permanently store the contents of the index in the |
|
repository with gitlink:git-commit[1]: |
|
|
|
------------------------------------------------ |
|
$ git commit |
|
------------------------------------------------ |
|
|
|
This will prompt you for a commit message. You've now stored the first |
|
version of your project in git. |
|
|
|
Making changes |
|
-------------- |
|
|
|
Modify some files, then add their updated contents to the index: |
|
|
|
------------------------------------------------ |
|
$ git add file1 file2 file3 |
|
------------------------------------------------ |
|
|
|
You are now ready to commit. You can see what is about to be committed |
|
using gitlink:git-diff[1] with the --cached option: |
|
|
|
------------------------------------------------ |
|
$ git diff --cached |
|
------------------------------------------------ |
|
|
|
(Without --cached, gitlink:git-diff[1] will show you any changes that |
|
you've made but not yet added to the index.) You can also get a brief |
|
summary of the situation with gitlink:git-status[1]: |
|
|
|
------------------------------------------------ |
|
$ git status |
|
# On branch master |
|
# Changes to be committed: |
|
# (use "git reset HEAD <file>..." to unstage) |
|
# |
|
# modified: file1 |
|
# modified: file2 |
|
# modified: file3 |
|
# |
|
------------------------------------------------ |
|
|
|
If you need to make any further adjustments, do so now, and then add any |
|
newly modified content to the index. Finally, commit your changes with: |
|
|
|
------------------------------------------------ |
|
$ git commit |
|
------------------------------------------------ |
|
|
|
This will again prompt your for a message describing the change, and then |
|
record a new version of the project. |
|
|
|
Alternatively, instead of running `git add` beforehand, you can use |
|
|
|
------------------------------------------------ |
|
$ git commit -a |
|
------------------------------------------------ |
|
|
|
which will automatically notice any modified (but not new) files, add |
|
them to the index, and commit, all in one step. |
|
|
|
A note on commit messages: Though not required, it's a good idea to |
|
begin the commit message with a single short (less than 50 character) |
|
line summarizing the change, followed by a blank line and then a more |
|
thorough description. Tools that turn commits into email, for |
|
example, use the first line on the Subject: line and the rest of the |
|
commit in the body. |
|
|
|
Git tracks content not files |
|
---------------------------- |
|
|
|
Many revision control systems provide an "add" command that tells the |
|
system to start tracking changes to a new file. Git's "add" command |
|
does something simpler and more powerful: `git add` is used both for new |
|
and newly modified files, and in both cases it takes a snapshot of the |
|
given files and stages that content in the index, ready for inclusion in |
|
the next commit. |
|
|
|
Viewing project history |
|
----------------------- |
|
|
|
At any point you can view the history of your changes using |
|
|
|
------------------------------------------------ |
|
$ git log |
|
------------------------------------------------ |
|
|
|
If you also want to see complete diffs at each step, use |
|
|
|
------------------------------------------------ |
|
$ git log -p |
|
------------------------------------------------ |
|
|
|
Often the overview of the change is useful to get a feel of |
|
each step |
|
|
|
------------------------------------------------ |
|
$ git log --stat --summary |
|
------------------------------------------------ |
|
|
|
Managing branches |
|
----------------- |
|
|
|
A single git repository can maintain multiple branches of |
|
development. To create a new branch named "experimental", use |
|
|
|
------------------------------------------------ |
|
$ git branch experimental |
|
------------------------------------------------ |
|
|
|
If you now run |
|
|
|
------------------------------------------------ |
|
$ git branch |
|
------------------------------------------------ |
|
|
|
you'll get a list of all existing branches: |
|
|
|
------------------------------------------------ |
|
experimental |
|
* master |
|
------------------------------------------------ |
|
|
|
The "experimental" branch is the one you just created, and the |
|
"master" branch is a default branch that was created for you |
|
automatically. The asterisk marks the branch you are currently on; |
|
type |
|
|
|
------------------------------------------------ |
|
$ git checkout experimental |
|
------------------------------------------------ |
|
|
|
to switch to the experimental branch. Now edit a file, commit the |
|
change, and switch back to the master branch: |
|
|
|
------------------------------------------------ |
|
(edit file) |
|
$ git commit -a |
|
$ git checkout master |
|
------------------------------------------------ |
|
|
|
Check that the change you made is no longer visible, since it was |
|
made on the experimental branch and you're back on the master branch. |
|
|
|
You can make a different change on the master branch: |
|
|
|
------------------------------------------------ |
|
(edit file) |
|
$ git commit -a |
|
------------------------------------------------ |
|
|
|
at this point the two branches have diverged, with different changes |
|
made in each. To merge the changes made in experimental into master, run |
|
|
|
------------------------------------------------ |
|
$ git merge experimental |
|
------------------------------------------------ |
|
|
|
If the changes don't conflict, you're done. If there are conflicts, |
|
markers will be left in the problematic files showing the conflict; |
|
|
|
------------------------------------------------ |
|
$ git diff |
|
------------------------------------------------ |
|
|
|
will show this. Once you've edited the files to resolve the |
|
conflicts, |
|
|
|
------------------------------------------------ |
|
$ git commit -a |
|
------------------------------------------------ |
|
|
|
will commit the result of the merge. Finally, |
|
|
|
------------------------------------------------ |
|
$ gitk |
|
------------------------------------------------ |
|
|
|
will show a nice graphical representation of the resulting history. |
|
|
|
At this point you could delete the experimental branch with |
|
|
|
------------------------------------------------ |
|
$ git branch -d experimental |
|
------------------------------------------------ |
|
|
|
This command ensures that the changes in the experimental branch are |
|
already in the current branch. |
|
|
|
If you develop on a branch crazy-idea, then regret it, you can always |
|
delete the branch with |
|
|
|
------------------------------------- |
|
$ git branch -D crazy-idea |
|
------------------------------------- |
|
|
|
Branches are cheap and easy, so this is a good way to try something |
|
out. |
|
|
|
Using git for collaboration |
|
--------------------------- |
|
|
|
Suppose that Alice has started a new project with a git repository in |
|
/home/alice/project, and that Bob, who has a home directory on the |
|
same machine, wants to contribute. |
|
|
|
Bob begins with: |
|
|
|
------------------------------------------------ |
|
$ git clone /home/alice/project myrepo |
|
------------------------------------------------ |
|
|
|
This creates a new directory "myrepo" containing a clone of Alice's |
|
repository. The clone is on an equal footing with the original |
|
project, possessing its own copy of the original project's history. |
|
|
|
Bob then makes some changes and commits them: |
|
|
|
------------------------------------------------ |
|
(edit files) |
|
$ git commit -a |
|
(repeat as necessary) |
|
------------------------------------------------ |
|
|
|
When he's ready, he tells Alice to pull changes from the repository |
|
at /home/bob/myrepo. She does this with: |
|
|
|
------------------------------------------------ |
|
$ cd /home/alice/project |
|
$ git pull /home/bob/myrepo master |
|
------------------------------------------------ |
|
|
|
This merges the changes from Bob's "master" branch into Alice's |
|
current branch. If Alice has made her own changes in the meantime, |
|
then she may need to manually fix any conflicts. (Note that the |
|
"master" argument in the above command is actually unnecessary, as it |
|
is the default.) |
|
|
|
The "pull" command thus performs two operations: it fetches changes |
|
from a remote branch, then merges them into the current branch. |
|
|
|
When you are working in a small closely knit group, it is not |
|
unusual to interact with the same repository over and over |
|
again. By defining 'remote' repository shorthand, you can make |
|
it easier: |
|
|
|
------------------------------------------------ |
|
$ git remote add bob /home/bob/myrepo |
|
------------------------------------------------ |
|
|
|
With this, Alice can perform the first operation alone using the |
|
"git fetch" command without merging them with her own branch, |
|
using: |
|
|
|
------------------------------------- |
|
$ git fetch bob |
|
------------------------------------- |
|
|
|
Unlike the longhand form, when Alice fetches from Bob using a |
|
remote repository shorthand set up with `git remote`, what was |
|
fetched is stored in a remote tracking branch, in this case |
|
`bob/master`. So after this: |
|
|
|
------------------------------------- |
|
$ git log -p master..bob/master |
|
------------------------------------- |
|
|
|
shows a list of all the changes that Bob made since he branched from |
|
Alice's master branch. |
|
|
|
After examining those changes, Alice |
|
could merge the changes into her master branch: |
|
|
|
------------------------------------- |
|
$ git merge bob/master |
|
------------------------------------- |
|
|
|
This `merge` can also be done by 'pulling from her own remote |
|
tracking branch', like this: |
|
|
|
------------------------------------- |
|
$ git pull . remotes/bob/master |
|
------------------------------------- |
|
|
|
Note that git pull always merges into the current branch, |
|
regardless of what else is given on the command line. |
|
|
|
Later, Bob can update his repo with Alice's latest changes using |
|
|
|
------------------------------------- |
|
$ git pull |
|
------------------------------------- |
|
|
|
Note that he doesn't need to give the path to Alice's repository; |
|
when Bob cloned Alice's repository, git stored the location of her |
|
repository in the repository configuration, and that location is |
|
used for pulls: |
|
|
|
------------------------------------- |
|
$ git config --get remote.origin.url |
|
/home/alice/project |
|
------------------------------------- |
|
|
|
(The complete configuration created by git-clone is visible using |
|
"git config -l", and the gitlink:git-config[1] man page |
|
explains the meaning of each option.) |
|
|
|
Git also keeps a pristine copy of Alice's master branch under the |
|
name "origin/master": |
|
|
|
------------------------------------- |
|
$ git branch -r |
|
origin/master |
|
------------------------------------- |
|
|
|
If Bob later decides to work from a different host, he can still |
|
perform clones and pulls using the ssh protocol: |
|
|
|
------------------------------------- |
|
$ git clone alice.org:/home/alice/project myrepo |
|
------------------------------------- |
|
|
|
Alternatively, git has a native protocol, or can use rsync or http; |
|
see gitlink:git-pull[1] for details. |
|
|
|
Git can also be used in a CVS-like mode, with a central repository |
|
that various users push changes to; see gitlink:git-push[1] and |
|
link:cvs-migration.html[git for CVS users]. |
|
|
|
Exploring history |
|
----------------- |
|
|
|
Git history is represented as a series of interrelated commits. We |
|
have already seen that the git log command can list those commits. |
|
Note that first line of each git log entry also gives a name for the |
|
commit: |
|
|
|
------------------------------------- |
|
$ git log |
|
commit c82a22c39cbc32576f64f5c6b3f24b99ea8149c7 |
|
Author: Junio C Hamano <junkio@cox.net> |
|
Date: Tue May 16 17:18:22 2006 -0700 |
|
|
|
merge-base: Clarify the comments on post processing. |
|
------------------------------------- |
|
|
|
We can give this name to git show to see the details about this |
|
commit. |
|
|
|
------------------------------------- |
|
$ git show c82a22c39cbc32576f64f5c6b3f24b99ea8149c7 |
|
------------------------------------- |
|
|
|
But there are other ways to refer to commits. You can use any initial |
|
part of the name that is long enough to uniquely identify the commit: |
|
|
|
------------------------------------- |
|
$ git show c82a22c39c # the first few characters of the name are |
|
# usually enough |
|
$ git show HEAD # the tip of the current branch |
|
$ git show experimental # the tip of the "experimental" branch |
|
------------------------------------- |
|
|
|
Every commit usually has one "parent" commit |
|
which points to the previous state of the project: |
|
|
|
------------------------------------- |
|
$ git show HEAD^ # to see the parent of HEAD |
|
$ git show HEAD^^ # to see the grandparent of HEAD |
|
$ git show HEAD~4 # to see the great-great grandparent of HEAD |
|
------------------------------------- |
|
|
|
Note that merge commits may have more than one parent: |
|
|
|
------------------------------------- |
|
$ git show HEAD^1 # show the first parent of HEAD (same as HEAD^) |
|
$ git show HEAD^2 # show the second parent of HEAD |
|
------------------------------------- |
|
|
|
You can also give commits names of your own; after running |
|
|
|
------------------------------------- |
|
$ git-tag v2.5 1b2e1d63ff |
|
------------------------------------- |
|
|
|
you can refer to 1b2e1d63ff by the name "v2.5". If you intend to |
|
share this name with other people (for example, to identify a release |
|
version), you should create a "tag" object, and perhaps sign it; see |
|
gitlink:git-tag[1] for details. |
|
|
|
Any git command that needs to know a commit can take any of these |
|
names. For example: |
|
|
|
------------------------------------- |
|
$ git diff v2.5 HEAD # compare the current HEAD to v2.5 |
|
$ git branch stable v2.5 # start a new branch named "stable" based |
|
# at v2.5 |
|
$ git reset --hard HEAD^ # reset your current branch and working |
|
# directory to its state at HEAD^ |
|
------------------------------------- |
|
|
|
Be careful with that last command: in addition to losing any changes |
|
in the working directory, it will also remove all later commits from |
|
this branch. If this branch is the only branch containing those |
|
commits, they will be lost. Also, don't use "git reset" on a |
|
publicly-visible branch that other developers pull from, as it will |
|
force needless merges on other developers to clean up the history. |
|
If you need to undo changes that you have pushed, use gitlink:git-revert[1] |
|
instead. |
|
|
|
The git grep command can search for strings in any version of your |
|
project, so |
|
|
|
------------------------------------- |
|
$ git grep "hello" v2.5 |
|
------------------------------------- |
|
|
|
searches for all occurrences of "hello" in v2.5. |
|
|
|
If you leave out the commit name, git grep will search any of the |
|
files it manages in your current directory. So |
|
|
|
------------------------------------- |
|
$ git grep "hello" |
|
------------------------------------- |
|
|
|
is a quick way to search just the files that are tracked by git. |
|
|
|
Many git commands also take sets of commits, which can be specified |
|
in a number of ways. Here are some examples with git log: |
|
|
|
------------------------------------- |
|
$ git log v2.5..v2.6 # commits between v2.5 and v2.6 |
|
$ git log v2.5.. # commits since v2.5 |
|
$ git log --since="2 weeks ago" # commits from the last 2 weeks |
|
$ git log v2.5.. Makefile # commits since v2.5 which modify |
|
# Makefile |
|
------------------------------------- |
|
|
|
You can also give git log a "range" of commits where the first is not |
|
necessarily an ancestor of the second; for example, if the tips of |
|
the branches "stable-release" and "master" diverged from a common |
|
commit some time ago, then |
|
|
|
------------------------------------- |
|
$ git log stable..experimental |
|
------------------------------------- |
|
|
|
will list commits made in the experimental branch but not in the |
|
stable branch, while |
|
|
|
------------------------------------- |
|
$ git log experimental..stable |
|
------------------------------------- |
|
|
|
will show the list of commits made on the stable branch but not |
|
the experimental branch. |
|
|
|
The "git log" command has a weakness: it must present commits in a |
|
list. When the history has lines of development that diverged and |
|
then merged back together, the order in which "git log" presents |
|
those commits is meaningless. |
|
|
|
Most projects with multiple contributors (such as the linux kernel, |
|
or git itself) have frequent merges, and gitk does a better job of |
|
visualizing their history. For example, |
|
|
|
------------------------------------- |
|
$ gitk --since="2 weeks ago" drivers/ |
|
------------------------------------- |
|
|
|
allows you to browse any commits from the last 2 weeks of commits |
|
that modified files under the "drivers" directory. (Note: you can |
|
adjust gitk's fonts by holding down the control key while pressing |
|
"-" or "+".) |
|
|
|
Finally, most commands that take filenames will optionally allow you |
|
to precede any filename by a commit, to specify a particular version |
|
of the file: |
|
|
|
------------------------------------- |
|
$ git diff v2.5:Makefile HEAD:Makefile.in |
|
------------------------------------- |
|
|
|
You can also use "git show" to see any such file: |
|
|
|
------------------------------------- |
|
$ git show v2.5:Makefile |
|
------------------------------------- |
|
|
|
Next Steps |
|
---------- |
|
|
|
This tutorial should be enough to perform basic distributed revision |
|
control for your projects. However, to fully understand the depth |
|
and power of git you need to understand two simple ideas on which it |
|
is based: |
|
|
|
* The object database is the rather elegant system used to |
|
store the history of your project--files, directories, and |
|
commits. |
|
|
|
* The index file is a cache of the state of a directory tree, |
|
used to create commits, check out working directories, and |
|
hold the various trees involved in a merge. |
|
|
|
link:tutorial-2.html[Part two of this tutorial] explains the object |
|
database, the index file, and a few other odds and ends that you'll |
|
need to make the most of git. |
|
|
|
If you don't want to continue with that right away, a few other |
|
digressions that may be interesting at this point are: |
|
|
|
* gitlink:git-format-patch[1], gitlink:git-am[1]: These convert |
|
series of git commits into emailed patches, and vice versa, |
|
useful for projects such as the linux kernel which rely heavily |
|
on emailed patches. |
|
|
|
* gitlink:git-bisect[1]: When there is a regression in your |
|
project, one way to track down the bug is by searching through |
|
the history to find the exact commit that's to blame. Git bisect |
|
can help you perform a binary search for that commit. It is |
|
smart enough to perform a close-to-optimal search even in the |
|
case of complex non-linear history with lots of merged branches. |
|
|
|
* link:everyday.html[Everyday GIT with 20 Commands Or So] |
|
|
|
* link:cvs-migration.html[git for CVS users].
|
|
|