8325e43b82
This knob lets you use the sha1dc implementation from:
https://github.com/cr-marcstevens/sha1collisiondetection
which can detect certain types of collision attacks (even
when we only see half of the colliding pair). So it
mitigates any attack which consists of getting the "good"
half of a collision into a trusted repository, and then
later replacing it with the "bad" half. The "good" half is
rejected by the victim's version of Git (and even if they
run an old version of Git, any sha1dc-enabled git will
complain loudly if it ever has to interact with the object).
The big downside is that it's slower than either the openssl
or block-sha1 implementations.
Here are some timings based off of linux.git:
- compute sha1 over whole packfile
sha1dc: 3.580s
blk-sha1: 2.046s (-43%)
openssl: 1.335s (-62%)
- rev-list --all --objects
sha1dc: 33.512s
blk-sha1: 33.514s (+0.0%)
openssl: 33.650s (+0.4%)
- git log --no-merges -10000 -p
sha1dc: 8.124s
blk-sha1: 7.986s (-1.6%)
openssl: 8.203s (+0.9%)
- index-pack --verify
sha1dc: 4m19s
blk-sha1: 2m57s (-32%)
openssl: 2m19s (-42%)
So overall the sha1 computation with collision detection is
about 1.75x slower than block-sha1, and 2.7x slower than
sha1. But of course most operations do more than just sha1.
Normal object access isn't really slowed at all (both the
+/- changes there are well within the run-to-run noise); any
changes are drowned out by the other work Git is doing.
The most-affected operation is `index-pack --verify`, which
is essentially just computing the sha1 on every object. This
is similar to the `index-pack` invocation that the receiver
of a push or fetch would perform. So clearly there's some
extra CPU load here.
There will also be some latency for the user, though keep in
mind that such an operation will generally be network bound
(this is about a 1.2GB packfile). Some of that extra CPU is
"free" in the sense that we use it while the pack is
streaming in anyway. But most of it comes during the
delta-resolution phase, after the whole pack has been
received. So we can imagine that for this (quite large)
push, the user might have to wait an extra 100 seconds over
openssl (which is what we use now). If we assume they can
push to us at 20Mbit/s, that's 480s for a 1.2GB pack, which
is only 20% slower.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
||
|---|---|---|
| Documentation | ||
| block-sha1 | ||
| builtin | ||
| ci | ||
| compat | ||
| contrib | ||
| ewah | ||
| git-gui | ||
| gitk-git | ||
| gitweb | ||
| mergetools | ||
| perl | ||
| po | ||
| ppc | ||
| refs | ||
| sha1dc | ||
| t | ||
| templates | ||
| vcs-svn | ||
| xdiff | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| .travis.yml | ||
| COPYING | ||
| GIT-VERSION-GEN | ||
| INSTALL | ||
| LGPL-2.1 | ||
| Makefile | ||
| README.md | ||
| RelNotes | ||
| abspath.c | ||
| aclocal.m4 | ||
| advice.c | ||
| advice.h | ||
| alias.c | ||
| alloc.c | ||
| apply.c | ||
| apply.h | ||
| archive-tar.c | ||
| archive-zip.c | ||
| archive.c | ||
| archive.h | ||
| argv-array.c | ||
| argv-array.h | ||
| attr.c | ||
| attr.h | ||
| base85.c | ||
| bisect.c | ||
| bisect.h | ||
| blob.c | ||
| blob.h | ||
| branch.c | ||
| branch.h | ||
| builtin.h | ||
| bulk-checkin.c | ||
| bulk-checkin.h | ||
| bundle.c | ||
| bundle.h | ||
| cache-tree.c | ||
| cache-tree.h | ||
| cache.h | ||
| check-builtins.sh | ||
| check-racy.c | ||
| check_bindir | ||
| color.c | ||
| color.h | ||
| column.c | ||
| column.h | ||
| combine-diff.c | ||
| command-list.txt | ||
| commit-slab.h | ||
| commit.c | ||
| commit.h | ||
| common-main.c | ||
| config.c | ||
| config.mak.in | ||
| config.mak.uname | ||
| configure.ac | ||
| connect.c | ||
| connect.h | ||
| connected.c | ||
| connected.h | ||
| convert.c | ||
| convert.h | ||
| copy.c | ||
| credential-cache--daemon.c | ||
| credential-cache.c | ||
| credential-store.c | ||
| credential.c | ||
| credential.h | ||
| csum-file.c | ||
| csum-file.h | ||
| ctype.c | ||
| daemon.c | ||
| date.c | ||
| decorate.c | ||
| decorate.h | ||
| delta.h | ||
| diff-delta.c | ||
| diff-lib.c | ||
| diff-no-index.c | ||
| diff.c | ||
| diff.h | ||
| diffcore-break.c | ||
| diffcore-delta.c | ||
| diffcore-order.c | ||
| diffcore-pickaxe.c | ||
| diffcore-rename.c | ||
| diffcore.h | ||
| dir-iterator.c | ||
| dir-iterator.h | ||
| dir.c | ||
| dir.h | ||
| editor.c | ||
| entry.c | ||
| environment.c | ||
| exec_cmd.c | ||
| exec_cmd.h | ||
| fast-import.c | ||
| fetch-pack.c | ||
| fetch-pack.h | ||
| fmt-merge-msg.h | ||
| fsck.c | ||
| fsck.h | ||
| generate-cmdlist.sh | ||
| gettext.c | ||
| gettext.h | ||
| git-add--interactive.perl | ||
| git-archimport.perl | ||
| git-bisect.sh | ||
| git-compat-util.h | ||
| git-cvsexportcommit.perl | ||
| git-cvsimport.perl | ||
| git-cvsserver.perl | ||
| git-difftool--helper.sh | ||
| git-filter-branch.sh | ||
| git-instaweb.sh | ||
| git-merge-octopus.sh | ||
| git-merge-one-file.sh | ||
| git-merge-resolve.sh | ||
| git-mergetool--lib.sh | ||
| git-mergetool.sh | ||
| git-p4.py | ||
| git-parse-remote.sh | ||
| git-quiltimport.sh | ||
| git-rebase--am.sh | ||
| git-rebase--interactive.sh | ||
| git-rebase--merge.sh | ||
| git-rebase.sh | ||
| git-remote-testgit.sh | ||
| git-request-pull.sh | ||
| git-send-email.perl | ||
| git-sh-i18n.sh | ||
| git-sh-setup.sh | ||
| git-stash.sh | ||
| git-submodule.sh | ||
| git-svn.perl | ||
| git-web--browse.sh | ||
| git.c | ||
| git.rc | ||
| gpg-interface.c | ||
| gpg-interface.h | ||
| graph.c | ||
| graph.h | ||
| grep.c | ||
| grep.h | ||
| hash.h | ||
| hashmap.c | ||
| hashmap.h | ||
| help.c | ||
| help.h | ||
| hex.c | ||
| http-backend.c | ||
| http-fetch.c | ||
| http-push.c | ||
| http-walker.c | ||
| http.c | ||
| http.h | ||
| ident.c | ||
| imap-send.c | ||
| iterator.h | ||
| khash.h | ||
| kwset.c | ||
| kwset.h | ||
| levenshtein.c | ||
| levenshtein.h | ||
| line-log.c | ||
| line-log.h | ||
| line-range.c | ||
| line-range.h | ||
| list-objects.c | ||
| list-objects.h | ||
| list.h | ||
| ll-merge.c | ||
| ll-merge.h | ||
| lockfile.c | ||
| lockfile.h | ||
| log-tree.c | ||
| log-tree.h | ||
| mailinfo.c | ||
| mailinfo.h | ||
| mailmap.c | ||
| mailmap.h | ||
| match-trees.c | ||
| merge-blobs.c | ||
| merge-blobs.h | ||
| merge-recursive.c | ||
| merge-recursive.h | ||
| merge.c | ||
| mergesort.c | ||
| mergesort.h | ||
| mru.c | ||
| mru.h | ||
| name-hash.c | ||
| notes-cache.c | ||
| notes-cache.h | ||
| notes-merge.c | ||
| notes-merge.h | ||
| notes-utils.c | ||
| notes-utils.h | ||
| notes.c | ||
| notes.h | ||
| object.c | ||
| object.h | ||
| pack-bitmap-write.c | ||
| pack-bitmap.c | ||
| pack-bitmap.h | ||
| pack-check.c | ||
| pack-objects.c | ||
| pack-objects.h | ||
| pack-revindex.c | ||
| pack-revindex.h | ||
| pack-write.c | ||
| pack.h | ||
| pager.c | ||
| parse-options-cb.c | ||
| parse-options.c | ||
| parse-options.h | ||
| patch-delta.c | ||
| patch-ids.c | ||
| patch-ids.h | ||
| path.c | ||
| pathspec.c | ||
| pathspec.h | ||
| pkt-line.c | ||
| pkt-line.h | ||
| preload-index.c | ||
| pretty.c | ||
| prio-queue.c | ||
| prio-queue.h | ||
| progress.c | ||
| progress.h | ||
| prompt.c | ||
| prompt.h | ||
| quote.c | ||
| quote.h | ||
| reachable.c | ||
| reachable.h | ||
| read-cache.c | ||
| ref-filter.c | ||
| ref-filter.h | ||
| reflog-walk.c | ||
| reflog-walk.h | ||
| refs.c | ||
| refs.h | ||
| remote-curl.c | ||
| remote-testsvn.c | ||
| remote.c | ||
| remote.h | ||
| replace_object.c | ||
| rerere.c | ||
| rerere.h | ||
| resolve-undo.c | ||
| resolve-undo.h | ||
| revision.c | ||
| revision.h | ||
| run-command.c | ||
| run-command.h | ||
| send-pack.c | ||
| send-pack.h | ||
| sequencer.c | ||
| sequencer.h | ||
| server-info.c | ||
| setup.c | ||
| sh-i18n--envsubst.c | ||
| sha1-array.c | ||
| sha1-array.h | ||
| sha1-lookup.c | ||
| sha1-lookup.h | ||
| sha1_file.c | ||
| sha1_name.c | ||
| shallow.c | ||
| shell.c | ||
| shortlog.h | ||
| show-index.c | ||
| sideband.c | ||
| sideband.h | ||
| sigchain.c | ||
| sigchain.h | ||
| split-index.c | ||
| split-index.h | ||
| strbuf.c | ||
| strbuf.h | ||
| streaming.c | ||
| streaming.h | ||
| string-list.c | ||
| string-list.h | ||
| submodule-config.c | ||
| submodule-config.h | ||
| submodule.c | ||
| submodule.h | ||
| symlinks.c | ||
| tag.c | ||
| tag.h | ||
| tar.h | ||
| tempfile.c | ||
| tempfile.h | ||
| thread-utils.c | ||
| thread-utils.h | ||
| tmp-objdir.c | ||
| tmp-objdir.h | ||
| trace.c | ||
| trace.h | ||
| trailer.c | ||
| trailer.h | ||
| transport-helper.c | ||
| transport.c | ||
| transport.h | ||
| tree-diff.c | ||
| tree-walk.c | ||
| tree-walk.h | ||
| tree.c | ||
| tree.h | ||
| unicode_width.h | ||
| unimplemented.sh | ||
| unix-socket.c | ||
| unix-socket.h | ||
| unpack-trees.c | ||
| unpack-trees.h | ||
| upload-pack.c | ||
| url.c | ||
| url.h | ||
| urlmatch.c | ||
| urlmatch.h | ||
| usage.c | ||
| userdiff.c | ||
| userdiff.h | ||
| utf8.c | ||
| utf8.h | ||
| varint.c | ||
| varint.h | ||
| version.c | ||
| version.h | ||
| versioncmp.c | ||
| walker.c | ||
| walker.h | ||
| wildmatch.c | ||
| wildmatch.h | ||
| worktree.c | ||
| worktree.h | ||
| wrap-for-bin.sh | ||
| wrapper.c | ||
| write_or_die.c | ||
| ws.c | ||
| wt-status.c | ||
| wt-status.h | ||
| xdiff-interface.c | ||
| xdiff-interface.h | ||
| zlib.c | ||
README.md
Git - fast, scalable, distributed revision control system
Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals.
Git is an Open Source project covered by the GNU General Public License version 2 (some parts of it are under different licenses, compatible with the GPLv2). It was originally written by Linus Torvalds with help of a group of hackers around the net.
Please read the file INSTALL for installation instructions.
Many Git online resources are accessible from http://git-scm.com/ including full documentation and Git related tools.
See Documentation/gittutorial.txt to get started, then see
Documentation/giteveryday.txt for a useful minimum set of commands, and
Documentation/git-.txt for documentation of each command.
If git has been correctly installed, then the tutorial can also be
read with man gittutorial or git help tutorial, and the
documentation of each command with man git-<commandname> or git help <commandname>.
CVS users may also want to read Documentation/gitcvs-migration.txt
(man gitcvs-migration or git help cvs-migration if git is
installed).
The user discussion and development of Git take place on the Git mailing list -- everyone is welcome to post bug reports, feature requests, comments and patches to git@vger.kernel.org (read Documentation/SubmittingPatches for instructions on patch submission). To subscribe to the list, send an email with just "subscribe git" in the body to majordomo@vger.kernel.org. The mailing list archives are available at https://public-inbox.org/git, http://marc.info/?l=git and other archival sites.
The maintainer frequently sends the "What's cooking" reports that list the current status of various development topics to the mailing list. The discussion following them give a good reference for project status, development direction and remaining tasks.
The name "git" was given by Linus Torvalds when he wrote the very first version. He described the tool as "the stupid content tracker" and the name as (depending on your mood):
- random three-letter combination that is pronounceable, and not actually used by any common UNIX command. The fact that it is a mispronunciation of "get" may or may not be relevant.
- stupid. contemptible and despicable. simple. Take your pick from the dictionary of slang.
- "global information tracker": you're in a good mood, and it actually works for you. Angels sing, and a light suddenly fills the room.
- "goddamn idiotic truckload of sh*t": when it breaks