You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
703 lines
22 KiB
703 lines
22 KiB
git-rebase(1) |
|
============= |
|
|
|
NAME |
|
---- |
|
git-rebase - Forward-port local commits to the updated upstream head |
|
|
|
SYNOPSIS |
|
-------- |
|
[verse] |
|
'git rebase' [-i | --interactive] [options] [--onto <newbase>] |
|
[<upstream>] [<branch>] |
|
'git rebase' [-i | --interactive] [options] --onto <newbase> |
|
--root [<branch>] |
|
'git rebase' --continue | --skip | --abort |
|
|
|
DESCRIPTION |
|
----------- |
|
If <branch> is specified, 'git rebase' will perform an automatic |
|
`git checkout <branch>` before doing anything else. Otherwise |
|
it remains on the current branch. |
|
|
|
If <upstream> is not specified, the upstream configured in |
|
branch.<name>.remote and branch.<name>.merge options will be used; see |
|
linkgit:git-config[1] for details. If you are currently not on any |
|
branch or if the current branch does not have a configured upstream, |
|
the rebase will abort. |
|
|
|
All changes made by commits in the current branch but that are not |
|
in <upstream> are saved to a temporary area. This is the same set |
|
of commits that would be shown by `git log <upstream>..HEAD` (or |
|
`git log HEAD`, if --root is specified). |
|
|
|
The current branch is reset to <upstream>, or <newbase> if the |
|
--onto option was supplied. This has the exact same effect as |
|
`git reset --hard <upstream>` (or <newbase>). ORIG_HEAD is set |
|
to point at the tip of the branch before the reset. |
|
|
|
The commits that were previously saved into the temporary area are |
|
then reapplied to the current branch, one by one, in order. Note that |
|
any commits in HEAD which introduce the same textual changes as a commit |
|
in HEAD..<upstream> are omitted (i.e., a patch already accepted upstream |
|
with a different commit message or timestamp will be skipped). |
|
|
|
It is possible that a merge failure will prevent this process from being |
|
completely automatic. You will have to resolve any such merge failure |
|
and run `git rebase --continue`. Another option is to bypass the commit |
|
that caused the merge failure with `git rebase --skip`. To check out the |
|
original <branch> and remove the .git/rebase-apply working files, use the |
|
command `git rebase --abort` instead. |
|
|
|
Assume the following history exists and the current branch is "topic": |
|
|
|
------------ |
|
A---B---C topic |
|
/ |
|
D---E---F---G master |
|
------------ |
|
|
|
From this point, the result of either of the following commands: |
|
|
|
|
|
git rebase master |
|
git rebase master topic |
|
|
|
would be: |
|
|
|
------------ |
|
A'--B'--C' topic |
|
/ |
|
D---E---F---G master |
|
------------ |
|
|
|
*NOTE:* The latter form is just a short-hand of `git checkout topic` |
|
followed by `git rebase master`. When rebase exits `topic` will |
|
remain the checked-out branch. |
|
|
|
If the upstream branch already contains a change you have made (e.g., |
|
because you mailed a patch which was applied upstream), then that commit |
|
will be skipped. For example, running `git rebase master` on the |
|
following history (in which A' and A introduce the same set of changes, |
|
but have different committer information): |
|
|
|
------------ |
|
A---B---C topic |
|
/ |
|
D---E---A'---F master |
|
------------ |
|
|
|
will result in: |
|
|
|
------------ |
|
B'---C' topic |
|
/ |
|
D---E---A'---F master |
|
------------ |
|
|
|
Here is how you would transplant a topic branch based on one |
|
branch to another, to pretend that you forked the topic branch |
|
from the latter branch, using `rebase --onto`. |
|
|
|
First let's assume your 'topic' is based on branch 'next'. |
|
For example, a feature developed in 'topic' depends on some |
|
functionality which is found in 'next'. |
|
|
|
------------ |
|
o---o---o---o---o master |
|
\ |
|
o---o---o---o---o next |
|
\ |
|
o---o---o topic |
|
------------ |
|
|
|
We want to make 'topic' forked from branch 'master'; for example, |
|
because the functionality on which 'topic' depends was merged into the |
|
more stable 'master' branch. We want our tree to look like this: |
|
|
|
------------ |
|
o---o---o---o---o master |
|
| \ |
|
| o'--o'--o' topic |
|
\ |
|
o---o---o---o---o next |
|
------------ |
|
|
|
We can get this using the following command: |
|
|
|
git rebase --onto master next topic |
|
|
|
|
|
Another example of --onto option is to rebase part of a |
|
branch. If we have the following situation: |
|
|
|
------------ |
|
H---I---J topicB |
|
/ |
|
E---F---G topicA |
|
/ |
|
A---B---C---D master |
|
------------ |
|
|
|
then the command |
|
|
|
git rebase --onto master topicA topicB |
|
|
|
would result in: |
|
|
|
------------ |
|
H'--I'--J' topicB |
|
/ |
|
| E---F---G topicA |
|
|/ |
|
A---B---C---D master |
|
------------ |
|
|
|
This is useful when topicB does not depend on topicA. |
|
|
|
A range of commits could also be removed with rebase. If we have |
|
the following situation: |
|
|
|
------------ |
|
E---F---G---H---I---J topicA |
|
------------ |
|
|
|
then the command |
|
|
|
git rebase --onto topicA~5 topicA~3 topicA |
|
|
|
would result in the removal of commits F and G: |
|
|
|
------------ |
|
E---H'---I'---J' topicA |
|
------------ |
|
|
|
This is useful if F and G were flawed in some way, or should not be |
|
part of topicA. Note that the argument to --onto and the <upstream> |
|
parameter can be any valid commit-ish. |
|
|
|
In case of conflict, 'git rebase' will stop at the first problematic commit |
|
and leave conflict markers in the tree. You can use 'git diff' to locate |
|
the markers (<<<<<<) and make edits to resolve the conflict. For each |
|
file you edit, you need to tell git that the conflict has been resolved, |
|
typically this would be done with |
|
|
|
|
|
git add <filename> |
|
|
|
|
|
After resolving the conflict manually and updating the index with the |
|
desired resolution, you can continue the rebasing process with |
|
|
|
|
|
git rebase --continue |
|
|
|
|
|
Alternatively, you can undo the 'git rebase' with |
|
|
|
|
|
git rebase --abort |
|
|
|
CONFIGURATION |
|
------------- |
|
|
|
rebase.stat:: |
|
Whether to show a diffstat of what changed upstream since the last |
|
rebase. False by default. |
|
|
|
rebase.autosquash:: |
|
If set to true enable '--autosquash' option by default. |
|
|
|
OPTIONS |
|
------- |
|
<newbase>:: |
|
Starting point at which to create the new commits. If the |
|
--onto option is not specified, the starting point is |
|
<upstream>. May be any valid commit, and not just an |
|
existing branch name. |
|
+ |
|
As a special case, you may use "A\...B" as a shortcut for the |
|
merge base of A and B if there is exactly one merge base. You can |
|
leave out at most one of A and B, in which case it defaults to HEAD. |
|
|
|
<upstream>:: |
|
Upstream branch to compare against. May be any valid commit, |
|
not just an existing branch name. Defaults to the configured |
|
upstream for the current branch. |
|
|
|
<branch>:: |
|
Working branch; defaults to HEAD. |
|
|
|
--continue:: |
|
Restart the rebasing process after having resolved a merge conflict. |
|
|
|
--abort:: |
|
Abort the rebase operation and reset HEAD to the original |
|
branch. If <branch> was provided when the rebase operation was |
|
started, then HEAD will be reset to <branch>. Otherwise HEAD |
|
will be reset to where it was when the rebase operation was |
|
started. |
|
|
|
--keep-empty:: |
|
Keep the commits that do not change anything from its |
|
parents in the result. |
|
|
|
--skip:: |
|
Restart the rebasing process by skipping the current patch. |
|
|
|
-m:: |
|
--merge:: |
|
Use merging strategies to rebase. When the recursive (default) merge |
|
strategy is used, this allows rebase to be aware of renames on the |
|
upstream side. |
|
+ |
|
Note that a rebase merge works by replaying each commit from the working |
|
branch on top of the <upstream> branch. Because of this, when a merge |
|
conflict happens, the side reported as 'ours' is the so-far rebased |
|
series, starting with <upstream>, and 'theirs' is the working branch. In |
|
other words, the sides are swapped. |
|
|
|
-s <strategy>:: |
|
--strategy=<strategy>:: |
|
Use the given merge strategy. |
|
If there is no `-s` option 'git merge-recursive' is used |
|
instead. This implies --merge. |
|
+ |
|
Because 'git rebase' replays each commit from the working branch |
|
on top of the <upstream> branch using the given strategy, using |
|
the 'ours' strategy simply discards all patches from the <branch>, |
|
which makes little sense. |
|
|
|
-X <strategy-option>:: |
|
--strategy-option=<strategy-option>:: |
|
Pass the <strategy-option> through to the merge strategy. |
|
This implies `--merge` and, if no strategy has been |
|
specified, `-s recursive`. Note the reversal of 'ours' and |
|
'theirs' as noted above for the `-m` option. |
|
|
|
-q:: |
|
--quiet:: |
|
Be quiet. Implies --no-stat. |
|
|
|
-v:: |
|
--verbose:: |
|
Be verbose. Implies --stat. |
|
|
|
--stat:: |
|
Show a diffstat of what changed upstream since the last rebase. The |
|
diffstat is also controlled by the configuration option rebase.stat. |
|
|
|
-n:: |
|
--no-stat:: |
|
Do not show a diffstat as part of the rebase process. |
|
|
|
--no-verify:: |
|
This option bypasses the pre-rebase hook. See also linkgit:githooks[5]. |
|
|
|
--verify:: |
|
Allows the pre-rebase hook to run, which is the default. This option can |
|
be used to override --no-verify. See also linkgit:githooks[5]. |
|
|
|
-C<n>:: |
|
Ensure at least <n> lines of surrounding context match before |
|
and after each change. When fewer lines of surrounding |
|
context exist they all must match. By default no context is |
|
ever ignored. |
|
|
|
-f:: |
|
--force-rebase:: |
|
Force the rebase even if the current branch is a descendant |
|
of the commit you are rebasing onto. Normally non-interactive rebase will |
|
exit with the message "Current branch is up to date" in such a |
|
situation. |
|
Incompatible with the --interactive option. |
|
+ |
|
You may find this (or --no-ff with an interactive rebase) helpful after |
|
reverting a topic branch merge, as this option recreates the topic branch with |
|
fresh commits so it can be remerged successfully without needing to "revert |
|
the reversion" (see the |
|
link:howto/revert-a-faulty-merge.txt[revert-a-faulty-merge How-To] for details). |
|
|
|
--ignore-whitespace:: |
|
--whitespace=<option>:: |
|
These flag are passed to the 'git apply' program |
|
(see linkgit:git-apply[1]) that applies the patch. |
|
Incompatible with the --interactive option. |
|
|
|
--committer-date-is-author-date:: |
|
--ignore-date:: |
|
These flags are passed to 'git am' to easily change the dates |
|
of the rebased commits (see linkgit:git-am[1]). |
|
Incompatible with the --interactive option. |
|
|
|
-i:: |
|
--interactive:: |
|
Make a list of the commits which are about to be rebased. Let the |
|
user edit that list before rebasing. This mode can also be used to |
|
split commits (see SPLITTING COMMITS below). |
|
|
|
-p:: |
|
--preserve-merges:: |
|
Instead of ignoring merges, try to recreate them. |
|
+ |
|
This uses the `--interactive` machinery internally, but combining it |
|
with the `--interactive` option explicitly is generally not a good |
|
idea unless you know what you are doing (see BUGS below). |
|
|
|
|
|
--root:: |
|
Rebase all commits reachable from <branch>, instead of |
|
limiting them with an <upstream>. This allows you to rebase |
|
the root commit(s) on a branch. Must be used with --onto, and |
|
will skip changes already contained in <newbase> (instead of |
|
<upstream>). When used together with --preserve-merges, 'all' |
|
root commits will be rewritten to have <newbase> as parent |
|
instead. |
|
|
|
--autosquash:: |
|
--no-autosquash:: |
|
When the commit log message begins with "squash! ..." (or |
|
"fixup! ..."), and there is a commit whose title begins with |
|
the same ..., automatically modify the todo list of rebase -i |
|
so that the commit marked for squashing comes right after the |
|
commit to be modified, and change the action of the moved |
|
commit from `pick` to `squash` (or `fixup`). |
|
+ |
|
This option is only valid when the '--interactive' option is used. |
|
+ |
|
If the '--autosquash' option is enabled by default using the |
|
configuration variable `rebase.autosquash`, this option can be |
|
used to override and disable this setting. |
|
|
|
--no-ff:: |
|
With --interactive, cherry-pick all rebased commits instead of |
|
fast-forwarding over the unchanged ones. This ensures that the |
|
entire history of the rebased branch is composed of new commits. |
|
+ |
|
Without --interactive, this is a synonym for --force-rebase. |
|
+ |
|
You may find this helpful after reverting a topic branch merge, as this option |
|
recreates the topic branch with fresh commits so it can be remerged |
|
successfully without needing to "revert the reversion" (see the |
|
link:howto/revert-a-faulty-merge.txt[revert-a-faulty-merge How-To] for details). |
|
|
|
include::merge-strategies.txt[] |
|
|
|
NOTES |
|
----- |
|
|
|
You should understand the implications of using 'git rebase' on a |
|
repository that you share. See also RECOVERING FROM UPSTREAM REBASE |
|
below. |
|
|
|
When the git-rebase command is run, it will first execute a "pre-rebase" |
|
hook if one exists. You can use this hook to do sanity checks and |
|
reject the rebase if it isn't appropriate. Please see the template |
|
pre-rebase hook script for an example. |
|
|
|
Upon completion, <branch> will be the current branch. |
|
|
|
INTERACTIVE MODE |
|
---------------- |
|
|
|
Rebasing interactively means that you have a chance to edit the commits |
|
which are rebased. You can reorder the commits, and you can |
|
remove them (weeding out bad or otherwise unwanted patches). |
|
|
|
The interactive mode is meant for this type of workflow: |
|
|
|
1. have a wonderful idea |
|
2. hack on the code |
|
3. prepare a series for submission |
|
4. submit |
|
|
|
where point 2. consists of several instances of |
|
|
|
a) regular use |
|
|
|
1. finish something worthy of a commit |
|
2. commit |
|
|
|
b) independent fixup |
|
|
|
1. realize that something does not work |
|
2. fix that |
|
3. commit it |
|
|
|
Sometimes the thing fixed in b.2. cannot be amended to the not-quite |
|
perfect commit it fixes, because that commit is buried deeply in a |
|
patch series. That is exactly what interactive rebase is for: use it |
|
after plenty of "a"s and "b"s, by rearranging and editing |
|
commits, and squashing multiple commits into one. |
|
|
|
Start it with the last commit you want to retain as-is: |
|
|
|
git rebase -i <after-this-commit> |
|
|
|
An editor will be fired up with all the commits in your current branch |
|
(ignoring merge commits), which come after the given commit. You can |
|
reorder the commits in this list to your heart's content, and you can |
|
remove them. The list looks more or less like this: |
|
|
|
------------------------------------------- |
|
pick deadbee The oneline of this commit |
|
pick fa1afe1 The oneline of the next commit |
|
... |
|
------------------------------------------- |
|
|
|
The oneline descriptions are purely for your pleasure; 'git rebase' will |
|
not look at them but at the commit names ("deadbee" and "fa1afe1" in this |
|
example), so do not delete or edit the names. |
|
|
|
By replacing the command "pick" with the command "edit", you can tell |
|
'git rebase' to stop after applying that commit, so that you can edit |
|
the files and/or the commit message, amend the commit, and continue |
|
rebasing. |
|
|
|
If you just want to edit the commit message for a commit, replace the |
|
command "pick" with the command "reword". |
|
|
|
If you want to fold two or more commits into one, replace the command |
|
"pick" for the second and subsequent commits with "squash" or "fixup". |
|
If the commits had different authors, the folded commit will be |
|
attributed to the author of the first commit. The suggested commit |
|
message for the folded commit is the concatenation of the commit |
|
messages of the first commit and of those with the "squash" command, |
|
but omits the commit messages of commits with the "fixup" command. |
|
|
|
'git rebase' will stop when "pick" has been replaced with "edit" or |
|
when a command fails due to merge errors. When you are done editing |
|
and/or resolving conflicts you can continue with `git rebase --continue`. |
|
|
|
For example, if you want to reorder the last 5 commits, such that what |
|
was HEAD~4 becomes the new HEAD. To achieve that, you would call |
|
'git rebase' like this: |
|
|
|
---------------------- |
|
$ git rebase -i HEAD~5 |
|
---------------------- |
|
|
|
And move the first patch to the end of the list. |
|
|
|
You might want to preserve merges, if you have a history like this: |
|
|
|
------------------ |
|
X |
|
\ |
|
A---M---B |
|
/ |
|
---o---O---P---Q |
|
------------------ |
|
|
|
Suppose you want to rebase the side branch starting at "A" to "Q". Make |
|
sure that the current HEAD is "B", and call |
|
|
|
----------------------------- |
|
$ git rebase -i -p --onto Q O |
|
----------------------------- |
|
|
|
Reordering and editing commits usually creates untested intermediate |
|
steps. You may want to check that your history editing did not break |
|
anything by running a test, or at least recompiling at intermediate |
|
points in history by using the "exec" command (shortcut "x"). You may |
|
do so by creating a todo list like this one: |
|
|
|
------------------------------------------- |
|
pick deadbee Implement feature XXX |
|
fixup f1a5c00 Fix to feature XXX |
|
exec make |
|
pick c0ffeee The oneline of the next commit |
|
edit deadbab The oneline of the commit after |
|
exec cd subdir; make test |
|
... |
|
------------------------------------------- |
|
|
|
The interactive rebase will stop when a command fails (i.e. exits with |
|
non-0 status) to give you an opportunity to fix the problem. You can |
|
continue with `git rebase --continue`. |
|
|
|
The "exec" command launches the command in a shell (the one specified |
|
in `$SHELL`, or the default shell if `$SHELL` is not set), so you can |
|
use shell features (like "cd", ">", ";" ...). The command is run from |
|
the root of the working tree. |
|
|
|
SPLITTING COMMITS |
|
----------------- |
|
|
|
In interactive mode, you can mark commits with the action "edit". However, |
|
this does not necessarily mean that 'git rebase' expects the result of this |
|
edit to be exactly one commit. Indeed, you can undo the commit, or you can |
|
add other commits. This can be used to split a commit into two: |
|
|
|
- Start an interactive rebase with `git rebase -i <commit>^`, where |
|
<commit> is the commit you want to split. In fact, any commit range |
|
will do, as long as it contains that commit. |
|
|
|
- Mark the commit you want to split with the action "edit". |
|
|
|
- When it comes to editing that commit, execute `git reset HEAD^`. The |
|
effect is that the HEAD is rewound by one, and the index follows suit. |
|
However, the working tree stays the same. |
|
|
|
- Now add the changes to the index that you want to have in the first |
|
commit. You can use `git add` (possibly interactively) or |
|
'git gui' (or both) to do that. |
|
|
|
- Commit the now-current index with whatever commit message is appropriate |
|
now. |
|
|
|
- Repeat the last two steps until your working tree is clean. |
|
|
|
- Continue the rebase with `git rebase --continue`. |
|
|
|
If you are not absolutely sure that the intermediate revisions are |
|
consistent (they compile, pass the testsuite, etc.) you should use |
|
'git stash' to stash away the not-yet-committed changes |
|
after each commit, test, and amend the commit if fixes are necessary. |
|
|
|
|
|
RECOVERING FROM UPSTREAM REBASE |
|
------------------------------- |
|
|
|
Rebasing (or any other form of rewriting) a branch that others have |
|
based work on is a bad idea: anyone downstream of it is forced to |
|
manually fix their history. This section explains how to do the fix |
|
from the downstream's point of view. The real fix, however, would be |
|
to avoid rebasing the upstream in the first place. |
|
|
|
To illustrate, suppose you are in a situation where someone develops a |
|
'subsystem' branch, and you are working on a 'topic' that is dependent |
|
on this 'subsystem'. You might end up with a history like the |
|
following: |
|
|
|
------------ |
|
o---o---o---o---o---o---o---o---o master |
|
\ |
|
o---o---o---o---o subsystem |
|
\ |
|
*---*---* topic |
|
------------ |
|
|
|
If 'subsystem' is rebased against 'master', the following happens: |
|
|
|
------------ |
|
o---o---o---o---o---o---o---o master |
|
\ \ |
|
o---o---o---o---o o'--o'--o'--o'--o' subsystem |
|
\ |
|
*---*---* topic |
|
------------ |
|
|
|
If you now continue development as usual, and eventually merge 'topic' |
|
to 'subsystem', the commits from 'subsystem' will remain duplicated forever: |
|
|
|
------------ |
|
o---o---o---o---o---o---o---o master |
|
\ \ |
|
o---o---o---o---o o'--o'--o'--o'--o'--M subsystem |
|
\ / |
|
*---*---*-..........-*--* topic |
|
------------ |
|
|
|
Such duplicates are generally frowned upon because they clutter up |
|
history, making it harder to follow. To clean things up, you need to |
|
transplant the commits on 'topic' to the new 'subsystem' tip, i.e., |
|
rebase 'topic'. This becomes a ripple effect: anyone downstream from |
|
'topic' is forced to rebase too, and so on! |
|
|
|
There are two kinds of fixes, discussed in the following subsections: |
|
|
|
Easy case: The changes are literally the same.:: |
|
|
|
This happens if the 'subsystem' rebase was a simple rebase and |
|
had no conflicts. |
|
|
|
Hard case: The changes are not the same.:: |
|
|
|
This happens if the 'subsystem' rebase had conflicts, or used |
|
`--interactive` to omit, edit, squash, or fixup commits; or |
|
if the upstream used one of `commit --amend`, `reset`, or |
|
`filter-branch`. |
|
|
|
|
|
The easy case |
|
~~~~~~~~~~~~~ |
|
|
|
Only works if the changes (patch IDs based on the diff contents) on |
|
'subsystem' are literally the same before and after the rebase |
|
'subsystem' did. |
|
|
|
In that case, the fix is easy because 'git rebase' knows to skip |
|
changes that are already present in the new upstream. So if you say |
|
(assuming you're on 'topic') |
|
------------ |
|
$ git rebase subsystem |
|
------------ |
|
you will end up with the fixed history |
|
------------ |
|
o---o---o---o---o---o---o---o master |
|
\ |
|
o'--o'--o'--o'--o' subsystem |
|
\ |
|
*---*---* topic |
|
------------ |
|
|
|
|
|
The hard case |
|
~~~~~~~~~~~~~ |
|
|
|
Things get more complicated if the 'subsystem' changes do not exactly |
|
correspond to the ones before the rebase. |
|
|
|
NOTE: While an "easy case recovery" sometimes appears to be successful |
|
even in the hard case, it may have unintended consequences. For |
|
example, a commit that was removed via `git rebase |
|
--interactive` will be **resurrected**! |
|
|
|
The idea is to manually tell 'git rebase' "where the old 'subsystem' |
|
ended and your 'topic' began", that is, what the old merge-base |
|
between them was. You will have to find a way to name the last commit |
|
of the old 'subsystem', for example: |
|
|
|
* With the 'subsystem' reflog: after 'git fetch', the old tip of |
|
'subsystem' is at `subsystem@{1}`. Subsequent fetches will |
|
increase the number. (See linkgit:git-reflog[1].) |
|
|
|
* Relative to the tip of 'topic': knowing that your 'topic' has three |
|
commits, the old tip of 'subsystem' must be `topic~3`. |
|
|
|
You can then transplant the old `subsystem..topic` to the new tip by |
|
saying (for the reflog case, and assuming you are on 'topic' already): |
|
------------ |
|
$ git rebase --onto subsystem subsystem@{1} |
|
------------ |
|
|
|
The ripple effect of a "hard case" recovery is especially bad: |
|
'everyone' downstream from 'topic' will now have to perform a "hard |
|
case" recovery too! |
|
|
|
BUGS |
|
---- |
|
The todo list presented by `--preserve-merges --interactive` does not |
|
represent the topology of the revision graph. Editing commits and |
|
rewording their commit messages should work fine, but attempts to |
|
reorder commits tend to produce counterintuitive results. |
|
|
|
For example, an attempt to rearrange |
|
------------ |
|
1 --- 2 --- 3 --- 4 --- 5 |
|
------------ |
|
to |
|
------------ |
|
1 --- 2 --- 4 --- 3 --- 5 |
|
------------ |
|
by moving the "pick 4" line will result in the following history: |
|
------------ |
|
3 |
|
/ |
|
1 --- 2 --- 4 --- 5 |
|
------------ |
|
|
|
GIT |
|
--- |
|
Part of the linkgit:git[1] suite
|
|
|