In "config.c" we host both the business logic to read and write config
files as well as the logic to parse specific Git-related variables. On
the one hand this is mixing concerns, but even more importantly it means
that we cannot easily remove the dependency on `the_repository` in our
config parsing logic.
Move the logic into "environment.c". This file is a grab bag of all
kinds of global state already, so it is quite a good fit. Furthermore,
it also hosts most of the global variables that we're parsing the config
values into, making this an even better fit.
Note that there is one hidden change: in `parse_fsync_components()` we
use an `int` to iterate through `ARRAY_SIZE(fsync_component_names)`. But
as -Wsign-compare warnings are enabled in this file this causes a
compiler warning. The issue is fixed by using a `size_t` instead.
This change allows us to drop the `USE_THE_REPOSITORY_VARIABLE`
declaration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_bool()`. All
callsites are adjusted so that they use
`repo_config_get_bool(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config()`. All callsites
are adjusted so that they use `repo_config(the_repository, ...)`
instead. While some callsites might already have a repository available,
this mechanical conversion is the exact same as the current situation
and thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename `read_object_with_reference()` to `odb_read_object_peeled()` to
match other functions related to the object database and our modern
coding guidelines. Furthermore though, the old name didn't really
describe very well what this function actually does, which is to walk
down any commit and tag objects until an object of the required type has
been found. This is generally referred to as "peeling", so the new name
should be way more descriptive.
No compatibility wrapper is introduced as the function is not used a lot
throughout our codebase.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename `repo_read_object_file()` to `odb_read_object()` to match other
functions related to the object database and our modern coding
guidelines.
Introduce a compatibility wrapper so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename `oid_object_info()` to `odb_read_object_info()` as well as their
`_extended()` variant to match other functions related to the object
database and our modern coding guidelines.
Introduce compatibility wrappers so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--recursive" flag for git-grep(1) allows users to grep for a string
across submodule boundaries. To make this work we add each submodule's
object sources to our own object database so that the objects can be
accessed directly.
The infrastructure for this depends on a global string list of submodule
paths. The caller is expected to call `add_submodule_odb_by_path()` for
each source and the object database will then eventually register all
submodule sources via `do_oid_object_info_extended()` in case it isn't
able to look up a specific object.
This reliance on global state is of course suboptimal with regards to
our libification efforts.
Refactor the logic so that the list of submodule sources is instead
tracked in the object database itself. This allows us to lose the
condition of `r == the_repository` before registering submodule sources
as we only ever add submodule sources to `the_repository` anyway. As
such, behaviour before and after this refactoring should always be the
same.
Rename the functions accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functions to manage alternates all depend on `the_repository`.
Refactor them to accept an object database as a parameter and adjust all
callers. The functions are renamed accordingly.
Note that right now the situation is still somewhat weird because we end
up using the object store path provided by the object store's repository
anyway. Consequently, we could have instead passed in a pointer to the
repository instead of passing in the pointer to the object store. This
will be addressed in subsequent commits though, where we will start to
use the path owned by the object store itself.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commits we have renamed the structures contained in
"object-store.h" to `struct object_database` and `struct odb_backend`.
As such, the code files "object-store.{c,h}" are confusingly named now.
Rename them to "odb.{c,h}" accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `object_directory` structure is used as an access point for a single
object directory like ".git/objects". While the structure isn't yet
fully self-contained, the intent is for it to eventually contain all
information required to access objects in one specific location.
While the name "object directory" is a good fit for now, this will
change over time as we continue with the agenda to make pluggable object
databases a thing. Eventually, objects may not be accessed via any kind
of directory at all anymore, but they could instead be backed by any
kind of durable storage mechanism. While it seems quite far-fetched for
now, it is thinkable that eventually this might even be some form of a
database, for example.
As such, the current name of this structure will become worse over time
as we evolve into the direction of pluggable ODBs. Immediate next steps
will start to carve out proper self-contained object directories, which
requires us to pass in these object directories as parameters. Based on
our modern naming schema this means that those functions should then be
named after their subsystem, which means that we would start to bake the
current name into the codebase more and more.
Let's preempt this by renaming the structure. There have been a couple
alternatives that were discussed:
- `odb_backend` was discarded because it led to the association that
one object database has a single backend, but the model is that one
alternate has one backend. Furthermore, "backend" is more about the
actual backing implementation and less about the high-level concept.
- `odb_alternate` was discarded because it is a bit of a stretch to
also call the main object directory an "alternate".
Instead, pick `odb_source` as the new name. It makes it sufficiently
clear that there can be multiple sources and does not cause confusion
when mixed with the already-existing "alternate" terminology.
In the future, this change allows us to easily introduce for example a
`odb_files_source` and other format-specific implementations.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update parse-options API to catch mistakes to pass address of an
integral variable of a wrong type/size.
* ps/parse-options-integers:
parse-options: detect mismatches in integer signedness
parse-options: introduce precision handling for `OPTION_UNSIGNED`
parse-options: introduce precision handling for `OPTION_INTEGER`
parse-options: rename `OPT_MAGNITUDE()` to `OPT_UNSIGNED()`
parse-options: support unit factors in `OPT_INTEGER()`
global: use designated initializers for options
parse: fix off-by-one for minimum signed values
It was reported that "t5620-backfill.sh" fails on s390x and sparc64 in a
test that exercises the "--min-batch-size" command line option. The
symptom was that the option didn't seem to have an effect: we didn't
fetch objects with a batch size of 20, but instead fetched all objects
at once.
As it turns out, the root cause is that `--min-batch-size` uses
`OPT_INTEGER()` to parse the command line option. While this macro
expects the caller to pass a pointer to an integer, we instead pass a
pointer to a `size_t`. This coincidentally works on most platforms, but
it breaks apart on the mentioned platforms because they are big endian.
This issue isn't specific to git-backfill(1): there are a couple of
other places where we have the same type confusion going on. This
indicates that the issue really is the interface that the parse-options
subsystem provides -- it is simply too easy to get this wrong as there
isn't any kind of compiler warning, and things just work on the most
common systems.
Address the systemic issue by introducing two new build asserts
`BARF_UNLESS_SIGNED()` and `BARF_UNLESS_UNSIGNED()`. As the names
already hint at, those macros will cause a compiler error when passed a
value that is not signed or unsigned, respectively.
Adapt `OPT_INTEGER()`, `OPT_UNSIGNED()` as well as `OPT_MAGNITUDE()` to
use those asserts. This uncovers a small set of sites where we indeed
have the same bug as in git-backfill(1). Adapt all of them to use the
correct option.
Reported-by: Todd Zullinger <tmz@pobox.com>
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we expose macros for most of our different option types understood
by the "parse-options" subsystem, not every combination of fields that
has one as that would otherwise quickly lead to an explosion of macros.
Instead, we just initialize structures manually for those variants of
fields that don't have a macro.
Callsites that open-code these structure initialization don't use
designated initializers though and instead just provide values for each
of the fields that they want to initialize. This has three significant
downsides:
- Callsites need to specify all values up to the last field that they
care about. This often includes fields that should simply be left at
their default zero-initialized state, which adds distraction.
- Any reader not deeply familiar with the layout of the structure
has a hard time figuring out what the respective initializers mean.
- Reordering or introducing new fields in the middle of the structure
is impossible without adapting all callsites.
Convert all sites to instead use designated initializers, which we have
started using in our codebase quite a while ago. This allows us to skip
any default-initialized fields, gives the reader context by specifying
the field names and allows us to reorder or introduce new fields where
we want to.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "object-store-ll.h" header has been introduced to keep transitive
header dependendcies and compile times at bay. Now that we have created
a new "object-store.c" file though we can easily move the last remaining
additional bit of "object-store.h", the `odb_path_map`, out of the
header.
Do so. As the "object-store.h" header is now equivalent to its low-level
alternative we drop the latter and inline it into the former.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `null_oid()` function returns the object ID that only consists of
zeroes. Naturally, this ID also depends on the hash algorithm used, as
the number of zeroes is different between SHA1 and SHA256. Consequently,
the function returns the hash-algorithm-specific null object ID.
This is currently done by depending on `the_hash_algo`, which implicitly
makes us depend on `the_repository`. Refactor the function to instead
pass in the hash algorithm for which we want to retrieve the null object
ID. Adapt callsites accordingly by passing in `the_repository`, thus
bubbling up the dependency on that global variable by one layer.
There are a couple of trivial exceptions for subsystems that already got
rid of `the_repository`. These subsystems instead use the repository
that is available via the calling context:
- "builtin/grep.c"
- "grep.c"
- "refs/debug.c"
There are also two non-trivial exceptions:
- "diff-no-index.c": Here we know that we may not have a repository
initialized at all, so we cannot rely on `the_repository`. Instead,
we adapt `diff_no_index()` to get a `struct git_hash_algo` as
parameter. The only caller is located in "builtin/diff.c", where we
know to call `repo_set_hash_algo()` in case we're running outside of
a Git repository. Consequently, it is fine to continue passing
`the_repository->hash_algo` even in this case.
- "builtin/ls-files.c": There is an in-flight patch series that drops
`USE_THE_REPOSITORY_VARIABLE` in this file, which causes a semantic
conflict because we use `null_oid()` in `show_submodule()`. The
value is passed to `repo_submodule_init()`, which may use the object
ID to resolve a tree-ish in the superproject from which we want to
read the submodule config. As such, the object ID should refer to an
object in the superproject, and consequently we need to use its hash
algorithm.
This means that we could in theory just not bother about this edge
case at all and just use `the_repository` in "diff-no-index.c". But
doing so would feel misdesigned.
Remove the `USE_THE_REPOSITORY_VARIABLE` preprocessor define in
"hash.c".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a couple of functions exposed by "object.c" that implicitly
depend on `the_repository`. Remove this dependency by injecting the
repository via a parameter. Adapt callers accordingly by simply using
`the_repository`, except in cases where the subsystem is already free of
the repository. In that case, we instead pass the repository provided by
the caller's context.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop using `the_repository` in the "pager" subsystem by passing in a
repository when setting up the pager and when configuring it.
Adjust callers accordingly by using `the_repository`. While there may be
some callers that have a repository available in their context, this
trivial conversion allows for easier verification and bubbles up the use
of `the_repository` by one level.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When executing with `--max-count=0` we'll return early from git-grep(1)
without performing any cleanup, which causes memory leaks. Plug these.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The convention to calling into built-in command implementation has
been updated to pass the repository, if known, together with the
prefix value.
* jc/pass-repo-to-builtins:
add: pass in repo variable instead of global the_repository
builtin: remove USE_THE_REPOSITORY for those without the_repository
builtin: remove USE_THE_REPOSITORY_VARIABLE from builtin.h
builtin: add a repository parameter for builtin functions
Instead of including USE_THE_REPOSITORY_VARIABLE by default on every
builtin, remove it from builtin.h and add it to all the builtins that
include builtin.h (by definition, that means all builtins/*.c).
Also, remove the include statement for repository.h since it gets
brought in through builtin.h.
The next step will be to migrate each builtin
from having to use the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when `get_oid_with_context()` fails it may have allocated some data
in the object context. But we do not release it in git-grep(1) when the
call fails, leading to a memory leak. Plug it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While it is documented in `struct object_context::path` that this
variable needs to be released by the caller, this fact is rather easy to
miss given that we do not ever provide a function to release the object
context. And of course, while some callers dutifully release the path,
many others don't.
Introduce a new `object_context_release()` function that releases the
path. Convert callsites that used to free the path to use that new
function and add missing calls to callsites that were leaking memory.
Refactor those callsites as required to have a single return path, only.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Work to support a repository that work with both SHA-1 and SHA-256
hash algorithms has started.
* eb/hash-transition: (30 commits)
t1016-compatObjectFormat: add tests to verify the conversion between objects
t1006: test oid compatibility with cat-file
t1006: rename sha1 to oid
test-lib: compute the compatibility hash so tests may use it
builtin/ls-tree: let the oid determine the output algorithm
object-file: handle compat objects in check_object_signature
tree-walk: init_tree_desc take an oid to get the hash algorithm
builtin/cat-file: let the oid determine the output algorithm
rev-parse: add an --output-object-format parameter
repository: implement extensions.compatObjectFormat
object-file: update object_info_extended to reencode objects
object-file-convert: convert commits that embed signed tags
object-file-convert: convert commit objects when writing
object-file-convert: don't leak when converting tag objects
object-file-convert: convert tag objects when writing
object-file-convert: add a function to convert trees between algorithms
object: factor out parse_mode out of fast-import and tree-walk into in object.h
cache: add a function to read an OID of a specific algorithm
tag: sign both hashes
commit: export add_header_signature to support handling signatures on tags
...
The code paths that call repo_read_object_file() have been
tightened to react to errors.
* js/check-null-from-read-object-file:
Always check the return value of `repo_read_object_file()`
There are a couple of places in Git's source code where the return value
is not checked. As a consequence, they are susceptible to segmentation
faults.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"cd sub && git grep -f patterns" tried to read "patterns" file at
the top level of the working tree; it has been corrected to read
"sub/patterns" instead.
* jc/grep-f-relative-to-cwd:
grep: -f <path> is relative to $cwd
Just like OPT_FILENAME() does, "git grep -f <path>" should treat
the <path> relative to the original $cwd by paying attention to the
prefix the command is given.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make it possible for git ls-tree to display the tree encoded
in the hash algorithm of the oid specified to git ls-tree, update
init_tree_desc to take as a parameter the oid of the tree object.
Update all callers of init_tree_desc and init_tree_desc_gently
to pass the oid of the tree object.
Use the oid of the tree object to discover the hash algorithm
of the oid and store that hash algorithm in struct tree_desc.
Use the hash algorithm in decode_tree_entry and
update_tree_entry_internal to handle reading a tree object encoded in
a hash algorithm that differs from the repositories hash algorithm.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep -e A --no-or -e B" is accepted, even though the negation
of "or" did not mean anything, which has been tightened.
* rs/grep-no-no-or:
grep: reject --no-or
Since 3e230fa1b2 (grep: use parseopt, 2009-05-07) git grep has been
accepting the option --no-or. It does the same as --or: nothing.
That's confusing and unintended. Forbid negating --or.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
a91f453f64 (grep: Add --max-depth option., 2009-07-22) added the option
--max-depth, defining it using a positional struct option initializer of
type OPTION_INTEGER. It also sets defval to 1 for some reason, but that
value would only be used if the flag PARSE_OPT_OPTARG was given.
Use the macro OPT_INTEGER_F instead to standardize the definition and
specify only the necessary values. This also normalizes argh to N_("n")
as a side-effect, which is OK.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code simplification.
* jc/tree-walk-drop-base-offset:
tree-walk: drop unused base_offset from do_match()
tree-walk: lose base_offset that is never used in tree_entry_interesting
Further shuffling of declarations across header files to streamline
file dependencies.
* cw/compat-util-header-cleanup:
git-compat-util: move alloc macros to git-compat-util.h
treewide: remove unnecessary includes for wrapper.h
kwset: move translation table from ctype
sane-ctype.h: create header for sane-ctype macros
git-compat-util: move wrapper.c funcs to its header
git-compat-util: move strbuf.c funcs to its header
The tree_entry_interesting() function takes base_offset, allowing
its callers to potentially pass a non-zero number to skip the early
part of the path string.
The feature is never exercised and we do not even know what bugs are
lurking there, as all callers pass 0 to the parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce reliance on a global state in the config reading API.
* gc/config-context:
config: pass source to config_parser_event_fn_t
config: add kvi.path, use it to evaluate includes
config.c: remove config_reader from configsets
config: pass kvi to die_bad_number()
trace2: plumb config kvi
config.c: pass ctx with CLI config
config: pass ctx with config files
config.c: pass ctx in configsets
config: add ctx arg to config_fn_t
urlmatch.h: use config_fn_t type
config: inline git_color_default_config
alloc_nr, ALLOC_GROW, and ALLOC_GROW_BY are commonly used macros for
dynamic array allocation. Moving these macros to git-compat-util.h with
the other alloc macros focuses alloc.[ch] to allocation for Git objects
and additionally allows us to remove inclusions to alloc.h from files
that solely used the above macros.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plumb "struct key_value_info" through all code paths that end in
die_bad_number(), which lets us remove the helper functions that read
analogous values from "struct config_reader". As a result, nothing reads
config_reader.config_kvi any more, so remove that too.
In config.c, this requires changing the signature of
git_configset_get_value() to 'return' "kvi" in an out parameter so that
git_configset_get_<type>() can pass it to git_config_<type>(). Only
numeric types will use "kvi", so for non-numeric types (e.g.
git_configset_get_string()), pass NULL to indicate that the out
parameter isn't needed.
Outside of config.c, config callbacks now need to pass "ctx->kvi" to any
of the git_config_<type>() functions that parse a config string into a
number type. Included is a .cocci patch to make that refactor.
The only exceptional case is builtin/config.c, where git_config_<type>()
is called outside of a config callback (namely, on user-provided input),
so config source information has never been available. In this case,
die_bad_number() defaults to a generic, but perfectly descriptive
message. Let's provide a safe, non-NULL for "kvi" anyway, but make sure
not to change the message.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "const struct config_context *ctx" arg to config_fn_t to hold
additional information about the config iteration operation.
config_context has a "struct key_value_info kvi" member that holds
metadata about the config source being read (e.g. what kind of config
source it is, the filename, etc). In this series, we're only interested
in .kvi, so we could have just used "struct key_value_info" as an arg,
but config_context makes it possible to add/adjust members in the future
without changing the config_fn_t signature. We could also consider other
ways of organizing the args (e.g. moving the config name and value into
config_context or key_value_info), but in my experiments, the
incremental benefit doesn't justify the added complexity (e.g. a
config_fn_t will sometimes invoke another config_fn_t but with a
different config value).
In subsequent commits, the .kvi member will replace the global "struct
config_reader" in config.c, making config iteration a global-free
operation. It requires much more work for the machinery to provide
meaningful values of .kvi, so for now, merely change the signature and
call sites, pass NULL as a placeholder value, and don't rely on the arg
in any meaningful way.
Most of the changes are performed by
contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every
config_fn_t:
- Modifies the signature to accept "const struct config_context *ctx"
- Passes "ctx" to any inner config_fn_t, if needed
- Adds UNUSED attributes to "ctx", if needed
Most config_fn_t instances are easily identified by seeing if they are
called by the various config functions. Most of the remaining ones are
manually named in the .cocci patch. Manual cleanups are still needed,
but the majority of it is trivial; it's either adjusting config_fn_t
that the .cocci patch didn't catch, or adding forward declarations of
"struct config_context ctx" to make the signatures make sense.
The non-trivial changes are in cases where we are invoking a config_fn_t
outside of config machinery, and we now need to decide what value of
"ctx" to pass. These cases are:
- trace2/tr2_cfg.c:tr2_cfg_set_fl()
This is indirectly called by git_config_set() so that the trace2
machinery can notice the new config values and update its settings
using the tr2 config parsing function, i.e. tr2_cfg_cb().
- builtin/checkout.c:checkout_main()
This calls git_xmerge_config() as a shorthand for parsing a CLI arg.
This might be worth refactoring away in the future, since
git_xmerge_config() can call git_default_config(), which can do much
more than just parsing.
Handle them by creating a KVI_INIT macro that initializes "struct
key_value_info" to a reasonable default, and use that to construct the
"ctx" arg.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_color_default_config() is a shorthand for calling two other config
callbacks. There are no other non-static functions that do this and it
will complicate our refactoring of config_fn_t so inline it instead.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also made it clear that several .c files that depended upon path.h
were missing a #include for it; add the missing includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the functions defined in read-cache.c, move their declarations from
cache.h to a new header, read-cache-ll.h. Also move some related inline
functions from cache.h to read-cache.h. The purpose of the
read-cache-ll.h/read-cache.h split is that about 70% of the sites don't
need the inline functions and the extra headers they include.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patrick Steinhardt