There exists no direct way to interrogate git about which paths are
matched by a given set of sparsity rules. It is possible to get this
information from git, but it includes checking out the commit that
contains the paths, applying the sparse checkout patterns and then using
something like 'git ls-files -t' to check if the skip worktree bit is
set. This works in some case, but there are cases where it is awkward or
infeasible to generate a checkout for this purpose.
Exposing the pattern matching of sparse checkout enables more tooling to
be built and avoids a situation where tools that want to reason about
sparse checkouts start containing parallel implementation of the rules.
To accommodate this, add a 'check-rules' subcommand to the
'sparse-checkout' builtin along the lines of the 'git check-ignore' and
'git check-attr' commands. The new command accepts a list of paths on
stdin and outputs just the ones the match the sparse checkout.
To allow for use in a bare repository and to allow for interrogating
about other patterns than the current ones, include a '--rules-file'
option which allows the caller to explicitly pass sparse checkout rules
in the format accepted by 'sparse-checkout set --stdin'.
To allow for reuse of the handling of input patterns for the
'--rules-file' flag, modify 'add_patterns_from_input()' to be able to
read from a 'FILE' instead of just stdin.
To allow for reuse of the logic which decides whether or not rules
should be interpreted as cone-mode patterns, split that part out of
'update_modes()' such that can be called without modifying the config.
An alternative could have been to create a new 'check-sparsity' command.
However, placing it under 'sparse-checkout' allows for a) more easily
re-using the sparse checkout pattern matching and cone/non-code mode
handling, and b) keeps the documentation for the command next to the
experimental warning and the cone-mode discussion.
Signed-off-by: William Sprent <williams@unity3d.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of the new option is to accommodate users who would like
--rebase-merges to be on by default and to facilitate turning on
--rebase-merges by default without configuration in a future version of
Git.
Name the new option rebase.rebaseMerges, even though it is a little
redundant, for consistency with the name of the command line option and
to be clear when scrolling through values in the [rebase] section of
.gitconfig.
Support setting rebase.rebaseMerges to the nonspecific value "true" for
users who don't need to or don't want to learn about the difference
between rebase-cousins and no-rebase-cousins.
Make --rebase-merges without an argument on the command line override
any value of rebase.rebaseMerges in the configuration, for consistency
with other command line flags with optional arguments that have an
associated config option.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As far as I can tell, --no-rebase-merges has always worked, but has
never been documented. It is especially important to document it before
a rebase.rebaseMerges option is introduced so that users know how to
override the config option on the command line. It's also important to
clarify that --rebase-merges without an argument is not the same as
--no-rebase-merges and not passing --rebase-merges is not the same as
passing --rebase-merges=no-rebase-cousins.
A test case is necessary to make sure that --no-rebase-merges keeps
working after its code is refactored in the following patches of this
series. The test case is a little contrived: It's unlikely that a user
would type both --rebase-merges and --no-rebase-merges at the same time.
However, if an alias is defined which includes --rebase-merges, the user
might decide to add --no-rebase-merges to countermand that part of the
alias but leave alone other flags set by the alias.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --contents option can be used with git blame to blame the file as if
it had the contents from the specified file. This is akin to copying the
contents into the working tree and then running git blame. This option
has been supported since 1cfe77333f ("git-blame: no rev means start
from the working tree file.")
The --contents option always blames the file as if it was based on the
current HEAD commit. If you try to pass a revision while using
--contents, you get the following error:
fatal: cannot use --contents with final commit object name
This is because the blame process generates a fake working tree commit
which always uses the HEAD object as its sole parent.
Enhance fake_working_tree_commit to take the object ID to use for the
parent instead of always using the HEAD object. Then, always generate a
fake commit when we have contents provided, even if we have a final
object. Remove the check to disallow --contents and a final revision.
Note that the behavior of generating a fake working commit is still
skipped when a revision is provided but --contents is not provided.
Generating such a commit in that case would combine the currently
checked out file contents with the provided revision, which breaks
normal blame behavior and produces unexpected results.
This enables use of --contents with an arbitrary revision, rather than
forcing the use of the local HEAD commit. This makes the --contents
option significantly more flexible, as it is no longer required to check
out the working tree to the desired commit before using --contents.
Reword the documentation so that its clear that --contents can be used
with <rev>.
Add tests for the --contents option to the annotate-tests.sh test
script.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" honors the src/dst prefixes set to nonstandard
values with configuration variables like "diff.noprefix", causing
receiving end of the patch that expects the standard -p1 format to
break. Teach "format-patch" to ignore end-user configuration and
always use the standard prefixes.
This is a backward compatibility breaking change.
* jk/format-patch-ignore-noprefix:
rebase: prefer --default-prefix to --{src,dst}-prefix for format-patch
format-patch: add format.noprefix option
format-patch: do not respect diff.noprefix
diff: add --default-prefix option
t4013: add tests for diff prefix options
diff: factor out src/dst prefix setup
There were two reasons we didn't do this. As "git am" is designed
to grok e-mailed patches, not necessarily taken out of a Git
repostiory or even if it came from a Git repository not necessarily
produced with format-patch, we didn't want to single it out as the
"blessed" input producer to the command. Also, in the original
workflow that "git am" was invented for, the user of "am" was
expected to be a different person than the users of "format-patch".
But this is a very safe change to make in 2023. Thanks to the
effort by many contributors, Git ended up becoming a bit more
popular than we initially thought it would be, and "format-patch",
which took me a few weeks to pursuade Linus to take in 2005, seems
to have become the de-facto standard tool to produce patch e-mails.
Interestingly, the documentation for "git apply", which is listed in
SEE ALSO section of "git am" documentation, does mention "am" and
"format-patch" as two things that are related but different from
"apply" in an early part.
Suggested-by: Kai Grossjohann <kai.grossjohann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2007 the docbook project made the mistake of converting ' to \' for
man pages [1]. It's a problem because groff interprets \' as acute
accent which is rendered as ' in ASCII, but as ´ in utf-8.
This started a cascade of bug reports in git [2], debian [3], Arch Linux
[4], docbook itself [5], and probably many others.
A solution was to use the correct groff character: \(aq, which is always
rendered as ', but the problem is that such character doesn't work in
other troff programs.
A portable solution required the use of a conditional character that is
\(aq in groff, but ' in all others:
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
The proper solution took time to be implemented in docbook, but in 2010
they did it [6]. So the docbook man page stylesheets were broken from
1.73 to 1.76.
Unfortunately by that point many workarounds already existed. In the
case of git, GNU_ROFF was introduced, and in the case of Arch Linux
a mapping from \' to ' was added to groff's man.local. Other
distributions might have done the same, or similar workarounds.
Since 2010 there is no need for this workaround, which is fixed
elsewhere, not just in docbook, but other layers as well.
Let's remove it.
[1] ea2a0bac56
[2] https://lore.kernel.org/git/20091012102926.GA3937@debian.b2j/
[3] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=507673#65
[4] https://bugs.archlinux.org/task/9643
[5] https://sourceforge.net/p/docbook/bugs/1022/
[6] fb55343426
Inspired-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change implemented the ahead_behind() method, including an
algorithm to compute the ahead/behind values for a number of commit tips
relative to a number of commit bases. Now, integrate that algorithm as
part of 'git for-each-ref' hidden behind a new format atom,
ahead-behind. This naturally extends to 'git branch' and 'git tag'
builtins, as well.
This format allows specifying multiple bases, if so desired, and all
matching references are compared against all of those bases. For this
reason, failing to read a reference provided from these atoms results in
an error.
In order to translate the ahead_behind() method information to the
format output code in ref-filter.c, we must populate arrays of
ahead_behind_count structs. In struct ref_array, we store the full array
that will be passed to ahead_behind(). In struct ref_array_item, we
store an array of pointers that point to the relvant items within the
full array. In this way, we can pull all relevant ahead/behind values
directly when formatting output for a specific item. It also ensures the
lifetime of the ahead_behind_count structs matches the time that the
array is being used.
Add specific tests of the ahead/behind counts in t6600-test-reach.sh, as
it has an interesting repository shape. In particular, its merging
strategy and its use of different commit-graphs would demonstrate over-
counting if the ahead_behind() method did not already account for that
possibility.
Also add tests for the specific for-each-ref, branch, and tag builtins.
In the case of 'git tag', there are intersting cases that happen when
some of the selected tips are not commits. This requires careful logic
around commits_nr in the second loop of filter_ahead_behind(). Also, the
test in t7004 is carefully located to avoid being dependent on the GPG
prereq. It also avoids using the test_commit helper, as that will add
ticks to the time and disrupt the expected timestamps in later tag
tests.
Also add performance tests in a new p1300-graph-walks.sh script. This
will be useful for more uses in the future, but for now compare the
ahead-behind counting algorithm in 'git for-each-ref' to the naive
implementation by running 'git rev-list --count' processes for each
input.
For the Git source code repository, the improvement is already obvious:
Test this tree
---------------------------------------------------------------
1500.2: ahead-behind counts: git for-each-ref 0.07(0.07+0.00)
1500.3: ahead-behind counts: git branch 0.07(0.06+0.00)
1500.4: ahead-behind counts: git tag 0.07(0.06+0.00)
1500.5: ahead-behind counts: git rev-list 1.32(1.04+0.27)
But the standard performance benchmark is the Linux kernel repository,
which demosntrates a significant improvement:
Test this tree
---------------------------------------------------------------
1500.2: ahead-behind counts: git for-each-ref 0.27(0.24+0.02)
1500.3: ahead-behind counts: git branch 0.27(0.24+0.03)
1500.4: ahead-behind counts: git tag 0.28(0.27+0.01)
1500.5: ahead-behind counts: git rev-list 4.57(4.03+0.54)
The 'git rev-list' test exists in this change as a demonstration, but it
will be removed in the next change to avoid wasting time on this
comparison.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user wishes to input a large list of patterns to 'git
for-each-ref' (likely a long list of exact refs) there are frequently
system limits on the number of command-line arguments.
Add a new --stdin option to instead read the patterns from standard
input. Add tests that check that any unrecognized arguments are
considered an error when --stdin is provided. Also, an empty pattern
list is interpreted as the complete ref set.
When reading from stdin, we populate the filter.name_patterns array
dynamically as opposed to pointing to the 'argv' array directly. This is
simple when using a strvec, as it is NULL-terminated in the same way. We
then free the memory directly from the strvec.
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After "git pull" that is configured with pull.rebase=false
merge.ff=only fails due to our end having our own development, give
advice messages to get out of the "Not possible to fast-forward"
state.
* fc/advice-diverged-history:
advice: add diverging advice for novices
"git bundle" learned that "-" is a common way to say that the input
comes from the standard input and/or the output goes to the
standard output. It used to work only for output and only from the
root level of the working tree.
* jk/bundle-use-dash-for-stdfiles:
parse-options: use prefix_filename_except_for_dash() helper
parse-options: consistently allocate memory in fix_filename()
bundle: don't blindly apply prefix_filename() to "-"
bundle: document handling of "-" as stdin
bundle: let "-" mean stdin for reading operations
A new "fetch.hideRefs" option can be used to exclude specified refs
from "rev-list --objects --stdin --not --all" traversal for
checking object connectivity, most useful when there are many
unrelated histories in a single repository.
* ew/fetch-hiderefs:
fetch: support hideRefs to speed up connectivity checks
Allow information carried on the WWW-AUthenticate header to be
passed to the credential helpers.
* mc/credential-helper-www-authenticate:
credential: add WWW-Authenticate header to cred requests
http: read HTTP WWW-Authenticate response headers
t5563: add tests for basic and anoymous HTTP access
Code clean-up to clarify the rule that "git-compat-util.h" must be
the first to be included.
* en/header-cleanup:
diff.h: remove unnecessary include of object.h
Remove unnecessary includes of builtin.h
treewide: replace cache.h with more direct headers, where possible
replace-object.h: move read_replace_refs declaration from cache.h to here
object-store.h: move struct object_info from cache.h
dir.h: refactor to no longer need to include cache.h
object.h: stop depending on cache.h; make cache.h depend on object.h
ident.h: move ident-related declarations out of cache.h
pretty.h: move has_non_ascii() declaration from commit.h
cache.h: remove dependence on hex.h; make other files include it explicitly
hex.h: move some hex-related declarations from cache.h
hash.h: move some oid-related declarations from cache.h
alloc.h: move ALLOC_GROW() functions from cache.h
treewide: remove unnecessary cache.h includes in source files
treewide: remove unnecessary cache.h includes
treewide: remove unnecessary git-compat-util.h includes in headers
treewide: ensure one of the appropriate headers is sourced first
The previous commit dropped support for diff.noprefix in format-patch.
While this will do the right thing in most cases (where sending patches
without a prefix was an accidental side effect of the sender preferring
to see their local patches without prefixes), it left no good option for
a project or workflow where you really do want to send patches without
prefixes. You'd be stuck using "--no-prefix" for every invocation.
So let's add a config option specific to format-patch that enables this
behavior. That gives people who have such a workflow a way to get what
they want, but makes it hard to accidentally trigger it.
A more backwards-compatible way of doing the transition would be to have
format.noprefix default to diff.noprefix when it's not set. But that
doesn't really help the "accidental" problem; people would have to
manually set format.noprefix=false. And it's unlikely that anybody
really wants format.noprefix=true in the first place. I'm adding it here
mostly as an escape hatch, not because anybody has expressed any
interest in it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can change the output of prefixes with diff.noprefix and
diff.mnemonicprefix, but there's no easy way to override them from the
command-line. We do have "--no-prefix", but there's no way to get back
to the default prefix. So let's add an option to do that.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user might not necessarily know why ff only was configured, maybe an
admin did it, or the installer (Git for Windows), or perhaps they just
followed some online advice.
This can happen not only on pull.ff=only, but merge.ff=only too.
Even worse if the user has configured pull.rebase=false and
merge.ff=only, because in those cases a diverging merge will constantly
keep failing. There's no trivial way to get out of this other than
`git merge --no-ff`.
Let's not assume our users are experts in git who completely understand
all their configurations.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have always allowed "bundle create -" to write to stdout, but it was
never documented. And a recent patch let reading operations like "bundle
list-heads -" read from stdin.
Let's document all of these cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 79862b6b77 (bundle-create: progress output control, 2019-11-10),
"bundle create" learned about the --all-progress and
--all-progress-implied options, which were copied from pack-objects.
I think these were a mistake.
In pack-objects, "all-progress-implied" is about switching the behavior
between a regular on-disk "git repack" and the use of pack-objects for
push/fetch (where a fetch does not want progress from the server during
the write stage; the client will print progress as it receives the
data). But there's no such distinction for bundles. Prior to
79862b6b77, we always printed the write stage. Afterwards, a vanilla:
git bundle create foo.bundle
omits the write progress, appearing to hang (especially if your
repository is large or your disk is slow). That seems like a regression.
It's possible that the flexibility to disable the write-phase progress
_could_ be useful for bundle. E.g., if you did something like:
ssh some-host git bundle create foo.bundle |
git bundle unbundle
But if you are running both in real-time, why are you using bundles in
the first place? You're better off doing a real fetch.
But even if we did want to support that, it should be the exception, and
vanilla "bundle create" should display the full progress. So we'd want
to name the option "--no-write-progress" or something.
The "--all-progress" option itself is even worse. It exists in
pack-objects only for historical reasons. It's a mistake because it
implies "--progress", and we added "--all-progress-implied" to fix that.
There is no reason to propagate that mistake to new commands.
Likewise, the documentation for these options was pulled from
pack-objects. But it doesn't make any sense in this context. It talks
about "--stdout", but that is not even an option that git-bundle
supports.
This patch flips the default for "--all-progress-implied" back to
"true", fixing the regression in 79862b6b77. This turns that option
into a noop, and means that "--all-progress" is really the same as
"--progress". We _could_ drop them completely, but since they've been
shipped with Git since v2.25.0, it's polite to continue accepting them.
I didn't implement any sort of "--no-write-progress" here. I'm not at
all convinced it's necessary, and the discussion from the original
thread:
https://lore.kernel.org/git/20191110204126.30553-2-robbat2@gentoo.org/
shows that that the main focus was on getting --progress and --quiet
support, and not any kind of clever "real-time bundle over the network"
feature. But technically this patch is making it impossible to do
something that you _could_ do post-79862b6b77c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This document only explains PGP signatures, but Git now supports X.509
signatures as of 1e7adb9756 (gpg-interface: introduce new signature
format "x509" using gpgsm, 2018-07-17), and SSH signatures as of
29b315778e (ssh signing: add ssh key format and signing code,
2021-09-10).
Additionally, explain that these signature formats are controlled
`gpg.format`, linking to its documentation, and explain in said
`gpg.format` documentation that the underlying signature format is
documented in signature-format.txt.
Signed-off-by: Gwyneth Morgan <gwymor@tilde.club>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the value of the WWW-Authenticate response header to credential
requests. Credential helpers that understand and support HTTP
authentication and authorization can use this standard header (RFC 2616
Section 14.47 [1]) to generate valid credentials.
WWW-Authenticate headers can contain information pertaining to the
authority, authentication mechanism, or extra parameters/scopes that are
required.
The current I/O format for credential helpers only allows for unique
names for properties/attributes, so in order to transmit multiple header
values (with a specific order) we introduce a new convention whereby a
C-style array syntax is used in the property name to denote multiple
ordered values for the same property.
In this case we send multiple `wwwauth[]` properties where the order
that the repeated attributes appear in the conversation reflects the
order that the WWW-Authenticate headers appeared in the HTTP response.
Add a set of tests to exercise the HTTP authentication header parsing
and the interop with credential helpers. Credential helpers will receive
WWW-Authenticate information in credential requests.
[1] https://datatracker.ietf.org/doc/html/rfc2616#section-14.47
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The format.attach configuration variable lacked a way to override a
value defined in a lower-priority configuration file (e.g. the
system one) by redefining it in a higher-priority configuration
file. Now, setting format.attach to an empty string means show the
patch inline in the e-mail message, without using MIME attachment.
This is a backward incompatible change.
* jc/countermand-format-attach:
format.attach: allow empty value to disable multi-part messages
The credential subsystem learned that a password may have an
explicit expiration.
* mh/credential-password-expiry:
credential: new attribute password_expiry_utc
"git archive HEAD^{tree}" records the paths with the current
timestamp in the archive, making it harder to obtain a stable
output. The command learned the --mtime option to specify an
arbitrary timestamp (e.g. --mtime="@0 +0000" for the epoch).
* rs/archive-mtime:
archive: add --mtime
The "diff" drivers specified by the "diff" attribute attached to
paths can now specify which algorithm (e.g. histogram) to use.
* jc/diff-algo-attribute:
diff: teach diff to read algorithm from diff driver
diff: consolidate diff algorithm option parsing
With roughly 800 remotes all fetching into their own
refs/remotes/$REMOTE/* island, the connectivity check[1] gets
expensive for each fetch on systems which lack sufficient RAM to
cache objects.
To do a no-op fetch on one $REMOTE out of hundreds, hideRefs now
allows the no-op fetch to take ~30 seconds instead of ~20 minutes
on a noisy, RAM-constrained machine (localhost, so no network latency):
git -c fetch.hideRefs=refs \
-c fetch.hideRefs='!refs/remotes/$REMOTE/' \
fetch $REMOTE
[1] `git rev-list --objects --stdin --not --all --quiet --alternate-refs'
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We had several C files ignoring the rule to include one of the
appropriate headers first; fix that.
While at it, the rule in Documentation/CodingGuidelines about which
header to include has also fallen out of sync, so update the wording to
mention other allowed headers.
Unfortunately, C files in reftable/ don't actually follow the previous
or updated rule. If you follow the #include chain in its C files,
reftable/system.h _tends_ to be first (i.e. record.c first includes
record.h, which first includes basics.h, which first includees
system.h), but not always (e.g. publicbasics.c includes another header
first that does not include system.h). However, I'm going to punt on
making actual changes to the C files in reftable/ since I do not want to
risk bringing it out-of-sync with any version being used externally.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some passwords have an expiry date known at generation. This may be
years away for a personal access token or hours for an OAuth access
token.
When multiple credential helpers are configured, `credential fill` tries
each helper in turn until it has a username and password, returning
early. If Git authentication succeeds, `credential approve`
stores the successful credential in all helpers. If authentication
fails, `credential reject` erases matching credentials in all helpers.
Helpers implement corresponding operations: get, store, erase.
The credential protocol has no expiry attribute, so helpers cannot
store expiry information. Even if a helper returned an improvised
expiry attribute, git credential discards unrecognised attributes
between operations and between helpers.
This is a particular issue when a storage helper and a
credential-generating helper are configured together:
[credential]
helper = storage # eg. cache or osxkeychain
helper = generate # eg. oauth
`credential approve` stores the generated credential in both helpers
without expiry information. Later `credential fill` may return an
expired credential from storage. There is no workaround, no matter how
clever the second helper. The user sees authentication fail (a retry
will succeed).
Introduce a password expiry attribute. In `credential fill`, ignore
expired passwords and continue to query subsequent helpers.
In the example above, `credential fill` ignores the expired password
and a fresh credential is generated. If authentication succeeds,
`credential approve` replaces the expired password in storage.
If authentication fails, the expired credential is erased by
`credential reject`. It is unnecessary but harmless for storage
helpers to self prune expired credentials.
Add support for the new attribute to credential-cache.
Eventually, I hope to see support in other popular storage helpers.
Example usage in a credential-generating helper
https://github.com/hickford/git-credential-oauth/pull/16
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Reviewed-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the run-hooks API to allow feeding data from the standard
input when running the hook script(s).
* ab/hook-api-with-stdin:
hook: support a --to-stdin=<path> option
sequencer: use the new hook API for the simpler "post-rewrite" call
hook API: support passing stdin to hooks, convert am's 'post-rewrite'
run-command: allow stdin for run_processes_parallel
run-command.c: remove dead assignment in while-loop
It can be useful to specify diff algorithms per file type. For example,
one may want to use the minimal diff algorithm for .json files, another
for .c files, etc.
The diff machinery already checks attributes for a diff driver. Teach
the diff driver parser a new type "algorithm" to look for in the
config, which will be used if a driver has been specified through the
attributes.
Enforce precedence of the diff algorithm by favoring the command line
option, then looking at the driver attributes & config combination, then
finally the diff.algorithm config.
To enforce precedence order, use a new `ignore_driver_algorithm` member
during options parsing to indicate the diff algorithm was set via command
line args.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow users to specify the modification time of archive entries. The
new option --mtime uses approxidate() to parse a time specification and
overrides the default of using the current time for trees and the commit
time for tags and commits. It can be used to create a reproducible
archive for a tree, or to use a specific mtime without creating a commit
with GIT_COMMITTER_DATE set.
This implementation doesn't support the negated form of the new option,
i.e. --no-mtime is not accepted. It is not possible to have no mtime at
all. We could use the Unix epoch or revert to the default behavior, but
since negation is not necessary for the intended use it's left undecided
for now.
Requested-by: Raul E Rangel <rrangel@chromium.org>
Suggested-by: demerphq <demerphq@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a lower precedence configuration file (e.g. /etc/gitconfig)
defines format.attach in any way, there was no way to disable it in
a more specific configuration file (e.g. $HOME/.gitconfig).
Change the behaviour of setting it to an empty string. It used to
mean that the result is still a multipart message with only dashes
used as a multi-part separator, but now it resets the setting to
the default (which would be to give an inline patch, unless other
command line options are in effect).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation mistakenly said that the default format was
similar to RFC 2822 format and tried to specify it by enumerating
differences, which had two problems:
* There are some more differences from the 2822 format that are not
mentioned; worse yet
* The default format is not modeled after RFC 2822 format at all.
As can be seen in f80cd783 (date.c: add "show_date()" function.,
2005-05-06), it is a derivative of ctime(3) format.
Stop saying that it is similar to RFC 2822, and rewrite the
description to explain the format without requiring the reader to
know any other format.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finally retire the scripted "git add -p/-i" implementation and have
everybody use the one reimplemented in C.
* ab/retire-scripted-add-p:
docs & comments: replace mentions of "git-add--interactive.perl"
add API: remove run_add_interactive() wrapper function
add: remove "add.interactive.useBuiltin" & Perl "git add--interactive"
The bundle-URI subsystem adds support for creation-token heuristics
to help incremental fetches.
* ds/bundle-uri-5:
bundle-uri: test missing bundles with heuristic
bundle-uri: store fetch.bundleCreationToken
fetch: fetch from an external bundle URI
bundle-uri: drop bundle.flag from design doc
clone: set fetch.bundleURI if appropriate
bundle-uri: download in creationToken order
bundle-uri: parse bundle.<id>.creationToken values
bundle-uri: parse bundle.heuristic=creationToken
t5558: add tests for creationToken heuristic
bundle: verify using check_connected()
bundle: test unbundling with incomplete history
Clarify how "checkout -b/-B" and "git branch [-f]" are similar but
different in the documentation.
* jc/doc-checkout-b:
checkout: document -b/-B to highlight the differences from "git branch"
Document that "branch -f <branch>" disables only the safety to
avoid recreating an existing branch.
* jc/doc-branch-update-checked-out-branch:
branch: document `-f` and linked worktree behaviour
Document ORIG_HEAD a bit more.
* pb/doc-orig-head:
git-rebase.txt: add a note about 'ORIG_HEAD' being overwritten
revisions.txt: be explicit about commands writing 'ORIG_HEAD'
git-merge.txt: mention 'ORIG_HEAD' in the Description
git-reset.txt: mention 'ORIG_HEAD' in the Description
git-cherry-pick.txt: do not use 'ORIG_HEAD' in example
We document that you can specify "refs" to ls-remote, but we don't
explain any further than that they are "matched" as patterns. Since this
can be interpreted in a lot of ways, let's clarify that they are
tail-matched globs.
Likewise, let's use the word "patterns" to refer to them consistently,
rather than "refs" (both here and in the quick "-h" help), and mention
more explicitly that only one pattern needs to be matched (though there
is also an example already that shows this in action).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are effectively three example commands and their output, but
they're smushed together with no extra whitespace. Let's add some blank
lines to make them more readable.
Likewise, the first example uses "./." to refer to the path of the
current repository, which is somewhat distracting. That may have been
necessary back in 2005 when it was added, but we can just say "." these
days.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose the "path_to_stdin" API added in the preceding commit in the
"git hook run" command.
For now we won't be using this command interface outside of the tests,
but exposing this functionality makes it easier to test the hook
API. The plan is to use this to extend the "sendemail-validate"
hook[1][2].
1. https://lore.kernel.org/git/ad152e25-4061-9955-d3e6-a2c8b1bd24e7@amd.com
2. https://lore.kernel.org/git/20230120012459.920932-1-michael.strawbridge@amd.com
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a remote with multiple configured URLs, `git remote -v` shows the
correct url that fetch uses. However, `git config remote.<remote>.url`
returns the last defined url instead. This discrepancy can cause
confusion for users with a remote defined as such, since any url
defined after the first essentially acts as a pushurl.
Add documentation to clarify how fetch interacts with multiple urls
and how push interacts with multiple pushurls and urls.
Add test affirming interaction between fetch and multiple urls.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we've removed "git-add--interactive.perl" let's replace
mentions of it with "add-interactive.c". In the case of the "git add"
documentation we were using it as an example filename, so the mention
wasn't wrong, but using a dead file is slightly confusing.
The "borrowed" comment here likewise isn't wrong, but let's mention
the successor file instead. In the case of pathspec.c the implied TODO
item should refer to the current code (and the comment may not even be
current, I didn't check).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since [1] first released with Git v2.37.0 the built-in version of "add
-i" has been the default. That built-in implementation was added in
[2], first released with Git v2.25.0.
At this point enough time has passed to allow for finding any
remaining bugs in this new implementation, so let's remove the
fallback code.
As with similar migrations for "stash"[3] and "rebase"[4] we're
keeping a mention of "add.interactive.useBuiltin" in the
documentation, but adding a warning() to notify any outstanding users
that the built-in is now the default. As with [5] and [6] we should
follow-up in the future and eventually remove that warning.
1. 0527ccb1b5 (add -i: default to the built-in implementation,
2021-11-30)
2. f83dff60a7 (Start to implement a built-in version of `git add
--interactive`, 2019-11-13)
3. 8a2cd3f512 (stash: remove the stash.useBuiltin setting,
2020-03-03)
4. d03ebd411c (rebase: remove the rebase.useBuiltin setting,
2019-03-18)
5. deeaf5ee07 (stash: remove documentation for `stash.useBuiltin`,
2022-01-27)
6. 9bcde4d531 (rebase: remove transitory rebase.useBuiltin setting &
env, 2021-03-23)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit ec14d4ecb5 (builtin.h: take over documentation from
api-builtin.txt, 2017-08-02) deleted api-builtin.txt and moved the
contents into builtin.h, but new-command.txt still references the old
file.
Signed-off-by: Wes Lord <weslord@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.35:
Git 2.35.7
Git 2.34.7
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.34:
Git 2.34.7
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.33:
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.32:
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.31:
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.30:
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
Doc update to ls-files.
* en/ls-files-doc-update:
ls-files: guide folks to --exclude-standard over other --exclude* options
ls-files: clarify descriptions of status tags for -t
ls-files: clarify descriptions of file selection options
ls-files: add missing documentation for --resolve-undo option
"git rebase" often ignored incompatible options instead of
complaining, which has been corrected.
* en/rebase-incompatible-opts:
rebase: provide better error message for apply options vs. merge config
rebase: put rebase_options initialization in single place
rebase: fix formatting of rebase --reapply-cherry-picks option in docs
rebase: clarify the OPT_CMDMODE incompatibilities
rebase: add coverage of other incompatible options
rebase: fix incompatiblity checks for --[no-]reapply-cherry-picks
rebase: fix docs about incompatibilities with --root
rebase: remove --allow-empty-message from incompatible opts
rebase: flag --apply and --merge as incompatible
rebase: mark --update-refs as requiring the merge backend
Documentation/gitformat-index.txt describes the "mode" as 32 bits, but
only documents 16 bits. Document the missing 16 bits and specify that
'unused' bits must be zero.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a bundle list specifies the "creationToken" heuristic, the Git
client downloads the list and then starts downloading bundles in
descending creationToken order. This process stops as soon as all
downloaded bundles can be applied to the repository (because all
required commits are present in the repository or in the downloaded
bundles).
When checking the same bundle list twice, this strategy requires
downloading the bundle with the maximum creationToken again, which is
wasteful. The creationToken heuristic promises that the client will not
have a use for that bundle if its creationToken value is at most the
previous creationToken value.
To prevent these wasteful downloads, create a fetch.bundleCreationToken
config setting that the Git client sets after downloading bundles. This
value allows skipping that maximum bundle download when this config
value is the same value (or larger).
To test that this works correctly, we can insert some "duplicate"
fetches into existing tests and demonstrate that only the bundle list is
downloaded.
The previous logic for downloading bundles by creationToken worked even
if the bundle list was empty, but now we have logic that depends on the
first entry of the list. Terminate early in the (non-sensical) case of
an empty bundle list.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Implementation Plan section lists a 'bundle.flag' option that is not
documented anywhere else. What is documented elsewhere in the document
and implemented by previous changes is the 'bundle.heuristic' config
key. For now, a heuristic is required to indicate that a bundle list is
organized for use during 'git fetch', and it is also sufficient for all
existing designs.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bundle providers may organize their bundle lists in a way that is
intended to improve incremental fetches, not just initial clones.
However, they do need to state that they have organized with that in
mind, or else the client will not expect to save time by downloading
bundles after the initial clone. This is done by specifying a
bundle.heuristic value.
There are two types of bundle lists: those at a static URI and those
that are advertised from a Git remote over protocol v2.
The new fetch.bundleURI config value applies for static bundle URIs that
are not advertised over protocol v2. If the user specifies a static URI
via 'git clone --bundle-uri', then Git can set this config as a reminder
for future 'git fetch' operations to check the bundle list before
connecting to the remote(s).
For lists provided over protocol v2, we will want to take a different
approach and create a property of the remote itself by creating a
remote.<id>.* type config key. That is not implemented in this change.
Later changes will update 'git fetch' to consume this option.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bundle.heuristic value communicates that the bundle list is
organized to make use of the bundle.<id>.creationToken values that may
be provided in the bundle list. Those values will create a total order
on the bundles, allowing the Git client to download them in a specific
order and even remember previously-downloaded bundles by storing the
maximum creation token value.
Before implementing any logic that parses or uses the
bundle.<id>.creationToken values, teach Git to parse the
bundle.heuristic value from a bundle list. We can use 'test-tool
bundle-uri' to print the heuristic value and verify that the parsing
works correctly.
As an extra precaution, create the internal 'heuristics' array to be a
list of (enum, string) pairs so we can iterate through the array entries
carefully, regardless of the enum values.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify column-padding operators in the pretty format string.
* po/pretty-format-columns-doc:
doc: pretty-formats note wide char limitations, and add tests
doc: pretty-formats describe use of ellipsis in truncation
doc: pretty-formats document negative column alignments
doc: pretty-formats: delineate `%<|(` parameter values
doc: pretty-formats: separate parameters from placeholders
Clarify how "checkout -b/-B" and "git branch [-f]" are similar but
different in the documentation.
* jc/doc-checkout-b:
checkout: document -b/-B to highlight the differences from "git branch"
Document that "branch -f <branch>" disables only the safety to
avoid recreating an existing branch.
* jc/doc-branch-update-checked-out-branch:
branch: document `-f` and linked worktree behaviour
When config which selects the merge backend (currently,
rebase.autosquash=true or rebase.updateRefs=true) conflicts with other
options on the command line (such as --whitespace=fix), make the error
message specifically call out the config option and specify how to
override that config option on the command line.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit ce5238a690 ("rebase --keep-base: imply --reapply-cherry-picks",
2022-10-17) accidentally added some blank lines that cause extra
paragraphs about --reapply-cherry-picks to be considered not part of
the documentation of that option. Remove the blank lines to make it
clear we are still discussing --reapply-cherry-picks.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--edit-todo was documented as being incompatible with any of the options
for the apply backend. However, it is also incompatible with any of the
options for the merge backend, and is incompatible with any options that
are not backend specific as well. The same can be said for --continue,
--skip, --abort, --quit, etc.
This is already somewhat implicitly covered by the synopsis, but since
"[<options>]" in the first two variants are vague it might be easy to
miss this. That might not be a big deal, but since the rebase manpage
has to spend so much verbiage about incompatibility of options, making
a separate section for these options that are incompatible with
everything else seems clearer. Do that, and remove the needless
inclusion of --edit-todo in the explicit incompatibility list.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--[no-]reapply-cherry-picks was traditionally only supported by the
sequencer. Support was added for the apply backend, when --keep-base is
also specified, in commit ce5238a690 ("rebase --keep-base: imply
--reapply-cherry-picks", 2022-10-17). Make the code error out when
--[no-]reapply-cherry-picks is specified AND the apply backend is used
AND --keep-base is not specified. Also, clarify a number of comments
surrounding the interaction of these flags.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 5dacd4abdd ("git-rebase.txt: document incompatible options",
2018-06-25), I added notes about incompatibilities between options for
the apply and merge backends. Unfortunately, I inverted the condition
when --root was incompatible with the apply backend. Fix the
documentation, and add a testcase that verifies the documentation
matches the code.
While at it, the documentation for --root also tried to cover some of
the backend differences between the apply and merge backends in relation
to reapplying cherry picks. The information:
* assumed that the apply backend was the default (it isn't anymore)
* was written before --reapply-cherry-picks became an option
* was written before the detailed information on backend differences
All of these factors make the sentence under --root about reapplying
cherry picks contradict information that is now available elsewhere in
the manual, and the other references are correct. So just strike this
sentence.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--allow-empty-message was turned into a no-op and even documented
as such; the flag is simply ignored. Since the flag is ignored, it
shouldn't be documented as being incompatible with other flags.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--update-refs is built in terms of the sequencer, which requires the
merge backend. It was already marked as incompatible with the apply
backend in the git-rebase manual, but the code didn't check for this
incompatibility and warn the user. Check and error now.
While at it, fix a typo in t3422...and fix some misleading wording
(most options which used to be am-specific have since been implemented
in the merge backend as well).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git check-attr" learned to take an optional tree-ish to read the
.gitattributes file from.
* kn/attr-from-tree:
attr: add flag `--source` to work with tree-ish
t0003: move setup for `--all` into new block
Three hyphens are rendered verbatim in documentation, so "--" has to be
used to produce a dash. Fix asciidoc output for dashes. This is
similar to previous commits f0b922473e (Documentation: render special
characters correctly, 2021-07-29) and de82095a95 (doc
hash-function-transition: fix asciidoc output, 2021-02-05).
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document ORIG_HEAD a bit more.
* pb/doc-orig-head:
git-rebase.txt: add a note about 'ORIG_HEAD' being overwritten
revisions.txt: be explicit about commands writing 'ORIG_HEAD'
git-merge.txt: mention 'ORIG_HEAD' in the Description
git-reset.txt: mention 'ORIG_HEAD' in the Description
git-cherry-pick.txt: do not use 'ORIG_HEAD' in example
The cURL one hasn't cooked for a week in 'next', but let's fast
track it so that linux-musl CI job would be happy.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commits added clarifications to the column alignment
placeholders, note that the spaces are optional around the parameters.
Also, a proposed extension [1] to allow hard truncation (without
ellipsis '..') highlighted that the existing code does not play well
with wide characters, such as Asian fonts and emojis.
For example, N wide characters take 2N columns so won't fit an odd number
column width, causing misalignment somewhere.
Further analysis also showed that decomposed characters, e.g. separate
`a` + `umlaut` Unicode code-points may also be mis-counted, in some cases
leaving multiple loose `umlauts` all combined together.
Add some notes about these limitations, and add basic tests to demonstrate
them.
The chosen solution for the tests is to substitute any wide character
that overlaps a splitting boundary for the unicode vertical ellipsis
code point as a rare but 'obvious' substitution.
An alternative could be the substitution with a single dot '.' which
matches regular expression usage, and our two dot ellipsis, and further
in scenarios where the bulk of the text is wide characters, would be
obvious. In mainly 'ascii' scenarios a singleton emoji being substituted
by a dot could be confusing.
It is enough that the tests fail cleanly. The final choice for the
substitute character can be deferred.
[1]
https://lore.kernel.org/git/20221030185614.3842-1-philipoakley@iee.email/
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a7f01c6b4d (pretty: support truncating in %>, %< and %><,
2013-04-19) added the use of ellipsis when truncating placeholder
values.
Show our 'two dot' ellipsis, and examples for the left, middle and
right truncation to avoid any confusion as to which end of the string
is adjusted. (cf justification and sub-string).
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 066790d7cb (pretty.c: support <direction>|(<negative number>) forms,
2016-06-16) added the option for right justified column alignment without
updating the documentation.
Add an explanation of its use of negative column values.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a57523428b (pretty: support padding placeholders, %< %> and %><,
2013-04-19) introduced column width place holders. It also added
separate column position `%<|(` placeholders for display screen based
placement.
Change the display screen parameter reference from 'N' to 'M' and
corresponding descriptives to make the distinction clearer.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a57523428b (pretty: support padding placeholders, %< %> and %><,
2013-04-19) introduced columnated place holders. These placeholders
can be confusing as they contain `<` and `>` characters as part
of their placeholders adjacent to the `<N>` parameters.
Add spaces either side of the `<N>` parameters in the title line.
The code (strtol) will consume any spaces around the number values
(assuming they are passed as a quoted string with spaces).
Note that the spaces are optional.
Subsequent commits will clarify other confusions.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing text read as if "git checkout -b/-B name" were
equivalent to "git branch [-f] name", which clearly was not
what we wanted to say.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -f name start" forces to recreate the named branch, but
the forcing does not defeat the "do not touch a branch that is
checked out elsewhere" safety valve.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With Asciidoctor, all of the '+' introduced in a797c0ea04 ("cat-file:
add mailmap support to --batch-check option", 2022-12-20) render
literally rather than functioning as list continuations. With asciidoc,
this renders just fine. It's not too surprising that there is room for
ambiguity and surprises here, since we have lists within lists.
Simply replacing all of these '+' with empty lines makes this render
fine using both tools. Except, in the third hunk, where after this inner
'*' list ends, we want to continue with more contents of the outer list
item (`--batch-command=<format>`). We can solve any ambiguity here and
make this clear to both tools by wrapping the inner list in an open
block (using "--").
For consistency, let's wrap all three of these inner lists from
a797c0ea04 in open blocks. This also future-proofs us a little -- if we
ever gain more contents after any of those first two lists, as we did
already in a797c0ea04 for the third list, we're prepared and should
render fine with both asciidoc and Asciidoctor from the start.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce an optional configuration to allow the trailing hash that
protects the index file from bit flipping.
* ds/omit-trailing-hash-in-index:
features: feature.manyFiles implies fast index writes
test-lib-functions: add helper for trailing hash
read-cache: add index.skipHash config option
hashfile: allow skipping the hash function
Conditionally skip the pre-applypatch and applypatch-msg hooks when
applying patches with 'git am'.
* tr/am--no-verify:
am: allow passing --no-verify flag
The contents of the .gitattributes files may evolve over time, but "git
check-attr" always checks attributes against them in the working tree
and/or in the index. It may be beneficial to optionally allow the users
to check attributes taken from a commit other than HEAD against paths.
Add a new flag `--source` which will allow users to check the
attributes against a commit (actually any tree-ish would do). When the
user uses this flag, we go through the stack of .gitattributes files but
instead of checking the current working tree and/or in the index, we
check the blobs from the provided tree-ish object. This allows the
command to also be used in bare repositories.
Since we use a tree-ish object, the user can pass "--source
HEAD:subdirectory" and all the attributes will be looked up as if
subdirectory was the root directory of the repository.
We cannot simply use the `<rev>:<path>` syntax without the `--source`
flag, similar to how it is used in `git show` because any non-flag
parameter before `--` is treated as an attribute and any parameter after
`--` is treated as a pathname.
The change involves creating a new function `read_attr_from_blob`, which
given the path reads the blob for the path against the provided source and
parses the attributes line by line. This function is plugged into
`read_attr()` function wherein we go through the stack of attributes
files.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Toon Claes <toon@iotcl.com>
Co-authored-by: toon@iotcl.com
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace non-existent `branch.<name>.fetch` to `remote.<repository>.fetch`, in
the first example in `git-fetch` doc, which was introduced in
d504f6975d (modernize fetch/merge/pull examples, 2009-10-21).
Rename placeholder `<name>` to `<repository>`, to be consistent with all other
uses in git docs, except that `git-config.txt` uses `remote.<name>.fetch` in
its "Variables" section.
Also add missing monospace markups.
Signed-off-by: Yukai Chou <muzimuzhi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, in the git-log documentation, the reference to generating
patches does not match the section title. This can make the section
"Generating patch text with -p" hard to find, since typically readers of
the documentation will copy and paste to search the page.
Let's make this more convenient for readers by linking it directly to
the section.
Since git-log pulls in diff-generate-patch.txt, we can provide a direct
link to the section. Otherwise, change the verbiage to match exactly
what the section title is, to at least make searching for it an easier
task.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d656218a83 (docs/bisect-lk2009: update nist report link,
2017-04-20) replaced a dead link to news release on nist.gov. However,
this might be confusing to the reader (like myself) because the article
git-bisect-lk2009.txt quotes from the news release but the exact quote
cannot be found in the full report. In addition to that, the link added
in 2017 is also dead in 2023.
Replace the reference to nist.gov with an version of the original NIST
news release archived to the Wayback Machine. Include also an updated
link to a live version of the full report.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A reference to Java Code Conventions in git-bisect-lk2009.txt uses an
outdated URL that redirects to table of contents for the conventions.
The actual claim about "80%" that this reference backs up is on the
first page of the conventions:
https://www.oracle.com/java/technologies/javase/codeconventions-introduction.html
Use this newer URL and its title in the reference.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much like the file selection options we tweaked in the last commit, the
status tags printed with -t had descriptions that were easy to
misunderstand, and for many of the same reasons. Clarify them.
Also, while at it, remove the "semi-deprecated" comment for "git
ls-files -t". The -t option was marked as semi-deprecated in 5bc0e247c4
("Document ls-files -t as semi-obsolete.", 2010-07-28) because:
"git ls-files -t" is [...] badly documented, hence we point the
users to superior alternatives.
The feature is marked as "semi-obsolete" but not "scheduled for removal"
since it's a plumbing command, scripts might use it, and Git testsuite
already uses it to test the state of the index.
Marking it as obsolete because it was easily misunderstood, which I
think was primarily due to documentation problems, is one strategy, but
I think fixing the documentation is a better option. Especially since
in the intervening time, "git ls-files -t" has become heavily used by
sparse-checkout users where the same confusion just doesn't apply.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous descriptions of the file selection options were very easy
to misunderstand. For example:
* "Show cached files in the output"
This could be interpreted as meaning "show files which have been
modified and git-add'ed, i.e. files which have cached changes
relative to HEAD".
* "Show deleted files"
This could be interpreted as meaning "for each `git rm $FILE` we
ran, show me $FILE"
* "Show modified files"
This could be interpreted as meaning "show files which have been
modified and git-add'ed" or as "show me files that differ from HEAD"
or as "show me undeleted files different from HEAD" (given that
--deleted is a separate option), none of which are correct.
Further, it's not very clear when some options only modify and/or
override other options, as was the case with --ignored, --directory, and
--unmerged (I've seen folks confused by each of them on the mailing
list, sometimes even fellow git developers.)
Tweak these definitions, and the one for --killed, to try to make them
all a bit more clear. Finally, also clarify early on that duplicate
reports for paths are often expected (both when (a) there are multiple
entries for the file in the index -- i.e. when there are conflicts, and
also (b) when the user specifies options that might pick the same file
multiple times, such as `git ls-files --cached --deleted --modified`
when there is a file with an unstaged deletion).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-files' --resolve-undo option has existed ever since 9d9a2f4aba
("resolve-undo: basic tests", 2009-12-25), but was never documented.
However, the option has been referred to in the ls-files manual itself
ever since ce74de931d ("ls-files: introduce "--format" option",
2022-07-23), making its omission a bit jarring. Document this option.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the "DETACHED HEAD" section in the git-checkout doc, it suggests
using "git checkout -b <branch-name>" to create a new branch on the
detached head.
On the other hand, when you checkout a commit that is not at the tip of
any named branch (e.g., when you checkout a tag), git suggests using
"git switch -c <branch-name>".
Add "git switch -c" as another option and mitigate this inconsistency.
Signed-off-by: Yutaro Ohno <yutaro.ono.418@gmail.com>
Acked-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'ORIG_HEAD' is written at the start of the rebase, but is not guaranteed
to still point to the original branch tip at the end of the rebase.
Indeed, using other commands that write 'ORIG_HEAD' during the rebase,
like splitting a commit using 'git reset HEAD^', will lead to 'ORIG_HEAD'
being overwritten. This causes confusion for some users [1].
Add a note about that in the 'Description' section, and mention the more
robust alternative of using the branch's reflog.
[1] https://lore.kernel.org/git/28ebf03b-e8bb-3769-556b-c9db17e43dbb@gmail.com/T/#m827179c5adcfb504d67f76d03c8e6942b55e5ed0
Reported-by: Erik Cervin Edin <erik@cervined.in>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When mentioning 'ORIG_HEAD', be explicit about which command write that
pseudo-ref, namely 'git am', 'git merge', 'git rebase' and 'git reset'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fact that 'git merge' writes 'ORIG_HEAD' before performing the merge
is missing from the documentation of the command.
Mention it in the 'Description' section.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fact that 'git reset' writes 'ORIG_HEAD' before changing HEAD is
mentioned in an example, but is missing from the 'Description' section.
Mention it in the discussion of the "'git reset' [<mode>] [<commit>]"
form of the command.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 67ac1e1d57 (cherry-pick/revert: add support for
-X/--strategy-option, 2010-12-10) added an example to the documentation
of 'git cherry-pick'. This example mentions how to abort a failed
cherry-pick and retry with an additional merge strategy option.
The command used in the example to abort the cherry-pick is 'git reset
--merge ORIG_HEAD', but cherry-pick does not write 'ORIG_HEAD' before
starting its operation. So this command would checkout a commit
unrelated to what was at HEAD when the user invoked cherry-pick.
Use 'git cherry-pick --abort' instead.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix typos in code comments which repeat various words. Most of the
cases are simple in that they repeat a word that usually cannot be
repeated in a grammatically correct sentence. Just remove the
incorrectly duplicated word in these cases and rewrap text, if needed.
A tricky case is usage of "that that", which is sometimes grammatically
correct. However, an instance of this in "t7527-builtin-fsmonitor.sh"
doesn't need two words "that", because there is only one daemon being
discussed, so replace the second "that" with "the".
Reword code comment "entries exist on on-disk index" in function
update_one in file cache-tree.c, by replacing incorrect preposition "on"
with "in".
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent addition of the index.skipHash config option allows index
writes to speed up by skipping the hash computation for the trailing
checksum. This is particularly critical for repositories with many files
at HEAD, so add this config option to two cases where users in that
scenario may opt-in to such behavior:
1. The feature.manyFiles config option enables some options that are
helpful for repositories with many files at HEAD.
2. 'scalar register' and 'scalar reconfigure' set config options that
optimize for large repositories.
In both of these cases, set index.skipHash=true to gain this
speedup. Add tests that demonstrate the proper way that
index.skipHash=true can override feature.manyFiles=true.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change allowed skipping the hashing portion of the
hashwrite API, using it instead as a buffered write API. Disabling the
hashwrite can be particularly helpful when the write operation is in a
critical path.
One such critical path is the writing of the index. This operation is so
critical that the sparse index was created specifically to reduce the
size of the index to make these writes (and reads) faster.
This trade-off between file stability at rest and write-time performance
is not easy to balance. The index is an interesting case for a couple
reasons:
1. Writes block users. Writing the index takes place in many user-
blocking foreground operations. The speed improvement directly
impacts their use. Other file formats are typically written in the
background (commit-graph, multi-pack-index) or are super-critical to
correctness (pack-files).
2. Index files are short lived. It is rare that a user leaves an index
for a long time with many staged changes. Outside of staged changes,
the index can be completely destroyed and rewritten with minimal
impact to the user.
Following a similar approach to one used in the microsoft/git fork [1],
add a new config option (index.skipHash) that allows disabling this
hashing during the index write. The cost is that we can no longer
validate the contents for corruption-at-rest using the trailing hash.
[1] 21fed2d914
We load this config from the repository config given by istate->repo,
with a fallback to the_repository if it is not set.
While older Git versions will not recognize the null hash as a special
case, the file format itself is still being met in terms of its
structure. Using this null hash will still allow Git operations to
function across older versions.
The one exception is 'git fsck' which checks the hash of the index file.
This used to be a check on every index read, but was split out to just
the index in a33fc72fe9 (read-cache: force_verify_index_checksum,
2017-04-14) and released first in Git 2.13.0. Document the versions that
relaxed these restrictions, with the optimistic expectation that this
change will be included in Git 2.40.0.
Here, we disable this check if the trailing hash is all zeroes. We add a
warning to the config option that this may cause undesirable behavior
with older Git versions.
As a quick comparison, I tested 'git update-index --force-write' with
and without index.skipHash=true on a copy of the Linux kernel
repository.
Benchmark 1: with hash
Time (mean ± σ): 46.3 ms ± 13.8 ms [User: 34.3 ms, System: 11.9 ms]
Range (min … max): 34.3 ms … 79.1 ms 82 runs
Benchmark 2: without hash
Time (mean ± σ): 26.0 ms ± 7.9 ms [User: 11.8 ms, System: 14.2 ms]
Range (min … max): 16.3 ms … 42.0 ms 69 runs
Summary
'without hash' ran
1.78 ± 0.76 times faster than 'with hash'
These performance benefits are substantial enough to allow users the
ability to opt-in to this feature, even with the potential confusion
with older 'git fsck' versions.
Test this new config option, both at a command-line level and within a
submodule. The confirmation is currently limited to confirm that 'git
fsck' does not complain about the index. Future updates will make this
test more robust.
It is critical that this test is placed before the test_index_version
tests, since those tests obliterate the .git/config file and hence lose
the setting from GIT_TEST_DEFAULT_HASH, if set.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop using "git --super-prefix" and narrow the scope of its use to
the submodule--helper.
* ab/no-more-git-global-super-prefix:
read-tree: add "--super-prefix" option, eliminate global
submodule--helper: convert "{update,clone}" to their own "--super-prefix"
submodule--helper: convert "status" to its own "--super-prefix"
submodule--helper: convert "sync" to its own "--super-prefix"
submodule--helper: convert "foreach" to its own "--super-prefix"
submodule--helper: don't use global --super-prefix in "absorbgitdirs"
submodule.c & submodule--helper: pass along "super_prefix" param
read-tree + fetch tests: test failing "--super-prefix" interaction
submodule absorbgitdirs tests: add missing "Migrating git..." tests
'cat-file' gains mailmap support for its '--batch-check' and '-s'
options.
* sa/cat-file-mailmap--batch-check:
cat-file: add mailmap support to --batch-check option
cat-file: add mailmap support to -s option
The git-am --no-verify flag is analogous to the same flag passed to
git-commit. It bypasses the pre-applypatch and applypatch-msg hooks
if they are enabled.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learned to honor format.mboxrd even when sending
patches to the standard output stream,
* ew/format-patch-mboxrd:
format-patch: support format.mboxrd with --stdout
Bundle URIs part 4.
* ds/bundle-uri-4:
clone: unbundle the advertised bundles
bundle-uri: download bundles from an advertised list
bundle-uri: allow relative URLs in bundle lists
strbuf: introduce strbuf_strip_file_from_path()
bundle-uri: serve bundle.* keys from config
bundle-uri client: add helper for testing server
transport: rename got_remote_heads
bundle-uri client: add boolean transfer.bundleURI setting
clone: request the 'bundle-uri' command when available
t: create test harness for 'bundle-uri' command
protocol v2: add server-side "bundle-uri" skeleton
Just like "git var GIT_EDITOR" abstracts the complex logic to
choose which editor gets used behind it, "git var" now give support
to GIT_SEQUENCE_EDITOR.
* sa/git-var-sequence-editor:
var: add GIT_SEQUENCE_EDITOR variable
Update the description of --force to use '<start-point>' rather than
'<startpoint>' to match the spelling used everywhere else in the
git-branch documentation.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--super-prefix" option to "git" was initially added in [1] for
use with "ls-files"[2], and shortly thereafter "submodule--helper"[3]
and "grep"[4]. It wasn't until [5] that "read-tree" made use of it.
At the time [5] made sense, but since then we've made "ls-files"
recurse in-process in [6], "grep" in [7], and finally
"submodule--helper" in the preceding commits.
Let's also remove it from "read-tree", which allows us to remove the
option to "git" itself.
We can do this because the only remaining user of it is the submodule
API, which will now invoke "read-tree" with its new "--super-prefix"
option. It will only do so when the "submodule_move_head()" function
is called.
That "submodule_move_head()" function was then only invoked by
"read-tree" itself, but now rather than setting an environment
variable to pass "--super-prefix" between cmd_read_tree() we:
- Set a new "super_prefix" in "struct unpack_trees_options". The
"super_prefixed()" function in "unpack-trees.c" added in [5] will now
use this, rather than get_super_prefix() looking up the environment
variable we set earlier in the same process.
- Add the same field to the "struct checkout", which is only needed to
ferry the "super_prefix" in the "struct unpack_trees_options" all the
way down to the "entry.c" callers of "submodule_move_head()".
Those calls which used the super prefix all originated in
"cmd_read_tree()". The only other caller is the "unlink_entry()"
caller in "builtin/checkout.c", which now passes a "NULL".
1. 74866d7579 (git: make super-prefix option, 2016-10-07)
2. e77aa336f1 (ls-files: optionally recurse into submodules, 2016-10-07)
3. 89c8626557 (submodule helper: support super prefix, 2016-12-08)
4. 0281e487fd (grep: optionally recurse into submodules, 2016-12-16)
5. 3d415425c7 (unpack-trees: support super-prefix option, 2017-01-17)
6. 188dce131f (ls-files: use repository object, 2017-06-22)
7. f9ee2fcdfa (grep: recurse in-process using 'struct repository', 2017-08-02)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mboxrd is a more robust output format when used with --stdout
and needs more exposure. Introducing this config knob lets
users choose the more robust format for all their --stdout
uses.
Relying on --pretty=mboxrd and including all of pretty-formats.txt
in the `git format-patch' documentation would likely be
confusing to users. Furthermore, this setting is useful across
multiple invocations. So introduce `format.mboxrd' as a boolean
configuration knob that changes the default --pretty=email format
to --pretty=mboxrd when (and only when) --stdout is in use.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The yet-to-be introduced client support for bundle-uri will always
fall back on a full clone, but we'd still like to be able to ignore a
server's bundle-uri advertisement entirely.
The new transfer.bundleURI config option defaults to 'false', but a user
can set it to 'true' to enable checking for bundle URIs from the origin
Git server using protocol v2.
Co-authored-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a skeleton server-side implementation of a new "bundle-uri" command
to protocol v2. This will allow conforming clients to optionally seed
their initial clones or incremental fetches from URLs containing
"*.bundle" files created with "git bundle create".
This change only performs the basic boilerplate of advertising a new
protocol v2 capability. The new 'bundle-uri' capability allows a client
to request a list of bundles. Right now, the server only returns a flush
packet, which corresponds to an empty advertisement. The bundle.* config
namespace describes which key-value pairs will be communicated across
this interface in future updates.
The critical bit right now is that the new boolean
uploadPack.adverstiseBundleURIs config value signals whether or not this
capability should be advertised at all.
An earlier version of this patch [1] used a different transfer format
than the "key=value" pairs in the current implementation. The change was
made to unify the protocol v2 command with the bundle lists provided by
independent bundle servers. Further, the standard allows for the server
to advertise a URI that contains a bundle list. This allows users
automatically discovering bundle providers that are loosely associated
with the origin server, but without the origin server knowing exactly
which bundles are currently available.
[1] https://lore.kernel.org/git/RFC-patch-v2-01.13-2fc87ce092b-20220311T155841Z-avarab@gmail.com/
The very-deep headings needed to be modified to stop at level 4 due to
documentation build issues. These were not recognized in earlier builds
since the file was previously in the Documentation/technical/ directory
and was built in a different way. With its current location, the
heavily-nested details were causing build issues and they are now
replaced with a bulletted list of details.
Co-authored-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the cat-file command with `--batch-check` option does not
complain when `--use-mailmap` option is given, the latter option is
ignored. Compute the size of the object after replacing the idents and
report it instead.
In order to make `--batch-check` option honour the mailmap mechanism we
have to read the contents of the commit/tag object.
There were two ways to do it:
1. Make two calls to `oid_object_info_extended()`. If `--use-mailmap`
option is given, the first call will get us the type of the object
and second call will only be made if the object type is either a
commit or tag to get the contents of the object.
2. Make one call to `oid_object_info_extended()` to get the type of the
object. Then, if the object type is either of commit or tag, make a
call to `repo_read_object_file()` to read the contents of the object.
I benchmarked the following command with both the above approaches and
compared against the current implementation where `--use-mailmap`
option is ignored:
`git cat-file --use-mailmap --batch-all-objects --batch-check --buffer
--unordered`
The results can be summarized as follows:
Time (mean ± σ)
default 827.7 ms ± 104.8 ms
first approach 6.197 s ± 0.093 s
second approach 1.975 s ± 0.217 s
Since, the second approach is faster than the first one, I implemented
it in this patch.
The command git cat-file can now use the mailmap mechanism to replace
idents with canonical versions for commit and tag objects. There are
several options like `--batch`, `--batch-check` and `--batch-command`
that can be combined with `--use-mailmap`. But the documentation for
`--batch`, `--batch-check` and `--batch-command` doesn't say so. This
patch fixes that documentation.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the cat-file command with `-s` option does not complain when
`--use-mailmap` option is given, the latter option is ignored. Compute
the size of the object after replacing the idents and report it instead.
In order to make `-s` option honour the mailmap mechanism we have to
read the contents of the commit/tag object. Make use of the call to
`oid_object_info_extended()` to get the contents of the object and store
in `buf`. `buf` is later freed in the function.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The advice message given by "git status" when it takes long time to
enumerate untracked paths has been updated.
* rr/status-untracked-advice:
status: modernize git-status "slow untracked files" advice
The editor program used by Git when editing the sequencer "todo" file
is determined by examining a few environment variables and also
affected by configuration variables. Introduce "git var
GIT_SEQUENCE_EDITOR" to give users access to the final result of the
logic without having to know the exact details.
This is very similar in spirit to 44fcb497 (Teach git var about
GIT_EDITOR, 2009-11-11) that introduced "git var GIT_EDITOR".
Signed-off-by: Sean Allred <allred.sean@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git var UNKNOWN_VARIABLE" and "git var VARIABLE" with the variable
given an empty value used to behave identically. Now the latter
just gives an empty output, while the former still gives an error
message.
* sa/git-var-empty:
var: allow GIT_EDITOR to return null
var: do not print usage() with a correct invocation
"merge-tree" learns a new `--merge-base` option.
* kz/merge-tree-merge-base:
docs: fix description of the `--merge-base` option
merge-tree.c: allow specifying the merge-base when --stdin is passed
merge-tree.c: add --merge-base=<commit> option
`git status` can be slow when there are a large number of
untracked files and directories since Git must search the entire
worktree to enumerate them. When it is too slow, Git prints
advice with the elapsed search time and a suggestion to disable
the search using the `-uno` option. This suggestion also carries
a warning that might scare off some users.
However, these days, `-uno` isn't the only option. Git can reduce
the time taken to enumerate untracked files by caching results from
previous `git status` invocations, when the `core.untrackedCache`
and `core.fsmonitor` features are enabled.
Update the `git status` man page to explain these configuration
options, and update the advice to provide more detail about the
current configuration and to refer to the updated documentation.
Signed-off-by: Rudy Rigot <rudy.rigot@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A GNU make pattern rule with multiple targets has always meant that
a single invocation of the recipe will build all the targets.
However in older versions of GNU make a recipe that did not really
build all the targets would be tolerated.
Starting with GNU make 4.4 this behavior is deprecated and pattern
rules are expected to generate files to match all the patterns.
If not all targets are created then GNU make will not consider any
target up to date and will re-run the recipe when it is run again.
Modify Documentation/Makefile to split the man page-creating pattern
rule into a separate pattern rule for each pattern.
Reported-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Paul Smith <psmith@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, git-var could print usage() even if the command was invoked
correctly with a variable defined in git_vars -- provided that its
read() function returned NULL.
Now, we only print usage() only if it was called with a logical
variable that wasn't defined -- regardless of read().
Since we now know the variable is valid when we call read_var(), we
can avoid printing usage() here (and exiting with code 129) and
instead exit quietly with code 1. While exiting with a different code
can be a breaking change, it's far better than changing the exit
status more generally from 'failure' to 'success'.
Signed-off-by: Sean Allred <allred.sean@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git receive-pack" used to use all the local refs as the boundary for
checking connectivity of the data "git push" sent, but now it uses
only the refs that it advertised to the pusher. In a repository with
the .hideRefs configuration, this reduces the resources needed to
perform the check.
cf. <221028.86bkpw805n.gmgdl@evledraar.gmail.com>
cf. <xmqqr0yrizqm.fsf@gitster.g>
* ps/receive-use-only-advertised:
receive-pack: only use visible refs for connectivity check
rev-parse: add `--exclude-hidden=` option
revision: add new parameter to exclude hidden refs
revision: introduce struct to handle exclusions
revision: move together exclusion-related functions
refs: get rid of global list of hidden refs
refs: fix memory leak when parsing hideRefs config
A pair of bugfixes to the Documentation/howto/maintain-git.txt guide.
* tb/howto-maintain-git-fixes:
Documentation: build redo-seen.sh from jch..seen
Documentation: build redo-jch.sh from master..jch
'git maintenance register' is taught to write configuration to an
arbitrary path, and 'git for-each-repo' is taught to expand tilde
characters in paths.
* rp/maintenance-qol:
builtin/gc.c: fix use-after-free in maintenance_unregister()
maintenance --unregister: fix uninit'd data use & -Wdeclaration-after-statement
maintenance: add option to register in a specific config
for-each-repo: interpolate repo path arguments
Update the credential-cache documentation to provide a more realistic
example.
* mh/increase-credential-cache-timeout:
Documentation: increase example cache timeout to 1 hour
"git repack" learns to send cruft objects out of the way into
packfiles outside the repository.
* tb/repack-expire-to:
builtin/repack.c: implement `--expire-to` for storing pruned objects
builtin/repack.c: write cruft packs to arbitrary locations
builtin/repack.c: pass "cruft_expiration" to `write_cruft_pack`
builtin/repack.c: pass "out" to `prepare_pack_objects`
Add a new `--exclude-hidden=` option that is similar to the one we just
added to git-rev-list(1). Given a section name `uploadpack` or `receive`
as argument, it causes us to exclude all references that would be hidden
by the respective `$section.hideRefs` configuration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Users can optionally hide refs from remote users in git-upload-pack(1),
git-receive-pack(1) and others via the `transfer.hideRefs`, but there is
not an easy way to obtain the list of all visible or hidden refs right
now. We'll require just that though for a performance improvement in our
connectivity check.
Add a new option `--exclude-hidden=` that excludes any hidden refs from
the next pseudo-ref like `--all` or `--branches`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
maintenance register currently records the maintenance repo exclusively
within the user's global configuration, but other configuration files
may be relevant when running maintenance if they are included from the
global config. This option allows the user to choose where maintenance
repos are recorded.
Signed-off-by: Ronan Pigott <ronan@rjp.ie>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Previously the docs only described storage helpers.
A concrete example: Git Credential Manager can generate credentials
for GitHub and GitLab via OAuth.
https://github.com/GitCredentialManager/git-credential-manager
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Git learned pushing submodules without pushing the superproject by
the user specifying --recurse-submodules=only through 6c656c3fe4
("submodules: add RECURSE_SUBMODULES_ONLY value", 2016-12-20) and
225e8bf778 ("push: add option to push only submodules", 2016-12-20).
For users who use this feature regularly, it is desirable to have an
equivalent configuration.
It turns out that such a configuration (push.recurseSubmodules=only) is
already supported, even though it is neither documented nor mentioned
in the commit messages, due to the way the --recurse-submodules=only
feature was implemented (a function used to parse --recurse-submodules
was updated to support "only", but that same function is used to parse
push.recurseSubmodules too). What is left is to document it and test it,
which is what this commit does.
There is a possible point of confusion when recursing into a submodule
that itself has the push.recurseSubmodules=only configuration, because
if a repository has only its submodules pushed and not itself, its
superproject can never be pushed. Therefore, treat such configurations
as being "on-demand", and print a warning message.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
It was previously unclear how unrecognised attributes are handled.
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The previous commit added a `--merge-base` option in order to allow
using a specified merge-base for the merge. Extend the input accepted
by `--stdin` to also allow a specified merge-base with each merge
requested. For example:
printf "<b3> -- <b1> <b2>" | git merge-tree --stdin
does a merge of b1 and b2, and uses b3 as the merge-base.
Signed-off-by: Kyle Zhao <kylezhao@tencent.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
This patch will give our callers more flexibility to use `git merge-tree`,
such as:
git merge-tree --write-tree --merge-base=branch^ HEAD branch
This does a merge of HEAD and branch, but uses branch^ as the merge-base.
And the reason why using an option flag instead of a positional argument
is to allow additional commits passed to merge-tree to be handled via an
octopus merge in the future.
Signed-off-by: Kyle Zhao <kylezhao@tencent.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Remotes are considered "promisor" if extensions.partialClone and some
other configuration variables are set. The casing for this in
Documentation/technical/repository-version.txt is not proper and may
cause confusion. This change corrects this casing.
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Previously, the example *decreased* the cache timeout compared to the
default, making it less user friendly.
Instead, nudge users to make cache more usable. Many users choose
store over cache.
https://lore.kernel.org/git/CAGJzqskRYN49SeS8kSEN5-vbB_Jt1QvAV9QhS6zNuKh0u8wxPQ@mail.gmail.com/
The default timeout remains 15 minutes. A stronger nudge would
be to increase that.
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The glossary entries for "commit-graph file" and "reachability
bitmap" have been added.
* po/glossary-around-traversal:
glossary: add reachability bitmap description
glossary: add "commit graph" description
doc: use 'object database' not ODB or abbreviation
doc: use "commit-graph" hyphenation consistently
Enable gc.cruftpacks by default for those who opt into
feature.experimental setting.
* es/mark-gc-cruft-as-experimental:
config: let feature.experimental imply gc.cruftPacks=true
gc: add tests for --cruft and friends
Git asks for a "password", but the user might use a
personal access token or OAuth access token instead.
Example:
Password for 'https://AzureDiamond@github.com':
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Once upon a time, Matheus wrote some patches to make
git grep [--cached | <REVISION>] ...
restrict its output to the sparsity specification when working in a
sparse checkout[1]. That effort got derailed by two things:
(1) The --sparse-index work just beginning which we wanted to avoid
creating conflicts for
(2) Never deciding on flag and config names and planned high level
behavior for all commands.
More recently, Shaoxuan implemented a more limited form of Matheus'
patches that only affected --cached, using a different flag name,
but also changing the default behavior in line with what Matheus did.
This again highlighted the fact that we never decided on command line
flag names, config option names, and the big picture path forward.
The --sparse-index work has been mostly complete (or at least released
into production even if some small edges remain) for quite some time
now. We have also had several discussions on flag and config names,
though we never came to solid conclusions. Stolee once upon a time
suggested putting all these into some document in
Documentation/technical[3], which Victoria recently also requested[4].
I'm behind the times, but here's a patch attempting to finally do that.
[1] https://lore.kernel.org/git/5f3f7ac77039d41d1692ceae4b0c5df3bb45b74a.1612901326.git.matheus.bernardino@usp.br/
(See his second link in that email in particular)
[2] https://lore.kernel.org/git/20220908001854.206789-2-shaoxuan.yuan02@gmail.com/
[3] https://lore.kernel.org/git/CABPp-BHwNoVnooqDFPAsZxBT9aR5Dwk5D9sDRCvYSb8akxAJgA@mail.gmail.com/
(Scroll to the very end for the final few paragraphs)
[4] https://lore.kernel.org/git/cafcedba-96a2-cb85-d593-ef47c8c8397c@github.com/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In a similar spirit as the previous commit, the 'seen' branch gets
rebuilt by reintegrating topics between 'jch' and the (old) tip of
'seen'.
Update the instructions on how to generate Meta/redo-seen.sh for the
first time to reflect this.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Rebuilding the 'jch' branch begins by reintegrating any topics between
'master' and 'jch', not 'master' and 'seen'.
In the maintainer guide, the documentation isn't quite right, since the
initial input to Meta/Reintegrate is "master..seen", not "master..jch".
This can lead to confusing results when generating the Meta/redo-jch.sh
script for the first time.
Additionally, rebuilding 'jch' takes place in two steps. First, running
the script up to the first "### match next" cut-line, and then comparing
the result with what's on 'next' (i.e. with "git diff jch next"). Then,
the remaining set of topics get merged down to 'jch' (which aren't on
'next') by running the entire "redo-jch.sh" script.
Clarify the documentation to reflect this.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
"git merge-tree --stdin" is a new way to request a series of merges
and report the merge results.
* en/merge-tree-sequence:
merge-tree: support multiple batched merges with --stdin
merge-tree: update documentation for differences in -z output
Define the logical elements of a "bundle list", data structure to
store them in-core, format to transfer them, and code to parse
them.
* ds/bundle-uri-3:
bundle-uri: suppress stderr from remote-https
bundle-uri: quiet failed unbundlings
bundle: add flags to verify_bundle()
bundle-uri: fetch a list of bundles
bundle: properly clear all revision flags
bundle-uri: limit recursion depth for bundle lists
bundle-uri: parse bundle list in config format
bundle-uri: unit test "key=value" parsing
bundle-uri: create "key=value" line parsing
bundle-uri: create base key-value pair parsing
bundle-uri: create bundle_list struct and helpers
bundle-uri: use plain string in find_temp_filename()
The role the security mailing list plays in an embargoed release
has been documented.
* jr/embargoed-releases-doc:
embargoed releases: also describe the git-security list and the process
"git rebase --keep-base" used to discard the commits that are
already cherry-picked to the upstream, even when "keep-base" meant
that the base, on top of which the history is being rebuilt, does
not yet include these cherry-picked commits. The --keep-base
option now implies --reapply-cherry-picks and --no-fork-point
options.
* pw/rebase-keep-base-fixes:
rebase --keep-base: imply --no-fork-point
rebase --keep-base: imply --reapply-cherry-picks
rebase: factor out branch_base calculation
rebase: rename merge_base to branch_base
rebase: store orig_head as a commit
rebase: be stricter when reading state files containing oids
t3416: set $EDITOR in subshell
t3416: tighten two tests
Two new facilities, "timer" and "counter", are introduced to the
trace2 API.
* jh/trace2-timers-and-counters:
trace2: add global counter mechanism
trace2: add stopwatch timers
trace2: convert ctx.thread_name from strbuf to pointer
trace2: improve thread-name documentation in the thread-context
trace2: rename the thread_name argument to trace2_thread_start
api-trace2.txt: elminate section describing the public trace2 API
tr2tls: clarify TLS terminology
trace2: use size_t alloc,nr_open_regions in tr2tls_thread_ctx
"git shortlog" learned to group by the "format" string.
* tb/shortlog-group:
shortlog: implement `--group=committer` in terms of `--group=<format>`
shortlog: implement `--group=author` in terms of `--group=<format>`
shortlog: extract `shortlog_finish_setup()`
shortlog: support arbitrary commit format `--group`s
shortlog: extract `--group` fragment for translation
shortlog: make trailer insertion a noop when appropriate
shortlog: accept `--date`-related options
Make sure generated dependency file is stably sorted to help
developers debugging their build issues.
* sg/stable-docdep:
Documentation/build-docdep.perl: generate sorted output
A new "--include-whitespace" option is added to "git patch-id", and
existing bugs in the internal patch-id logic that did not match
what "git patch-id" produces have been corrected.
* jz/patch-id:
builtin: patch-id: remove unused diff-tree prefix
builtin: patch-id: add --verbatim as a command mode
patch-id: fix patch-id for mode changes
builtin: patch-id: fix patch-id with binary diffs
patch-id: use stable patch-id for rebases
patch-id: fix stable patch id for binary / header-only
Git has an additional "commit graph" capability that supplements the
normal commit object's directed acyclic graph (DAG). The supplemental
commit graph file is designed for speed of access.
Describe the commit graph both from the normative DAG view point and
from the commit graph file perspective.
Also, clarify the link between the branch ref and branch tip
by linking to the `ref` glossary entry, matching this commit graph
entry.
The commit-graph file is also distinguished by its hyphenation.
Subsequent commit catches the few cases where the hyphenation of
commit-graph was missing.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The abbreviation 'ODB' is used in the technical documentation
sections for commit-graph and parallel-checkout, along with an
'odb' option in `git-pack-redundant`, without expansion.
Use 'object database' in full, in those entries. The text has not
been reflowed to keep the changes minimal.
While in the glossary for `object` terms, add the common`oid`
abbreviation to its entry.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Note, historical release notes have not been updated.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The short-help text shown by "git cmd -h" and the synopsis text
shown at the beginning of "git help cmd" have been made more
consistent.
* ab/doc-synopsis-and-cmd-usage: (34 commits)
tests: assert consistent whitespace in -h output
tests: start asserting that *.txt SYNOPSIS matches -h output
doc txt & -h consistency: make "worktree" consistent
worktree: define subcommand -h in terms of command -h
reflog doc: list real subcommands up-front
doc txt & -h consistency: make "commit" consistent
doc txt & -h consistency: make "diff-tree" consistent
doc txt & -h consistency: use "[<label>...]" for "zero or more"
doc txt & -h consistency: make "annotate" consistent
doc txt & -h consistency: make "stash" consistent
doc txt & -h consistency: add missing options
doc txt & -h consistency: use "git foo" form, not "git-foo"
doc txt & -h consistency: make "bundle" consistent
doc txt & -h consistency: make "read-tree" consistent
doc txt & -h consistency: make "rerere" consistent
doc txt & -h consistency: add missing options and labels
doc txt & -h consistency: make output order consistent
doc txt & -h consistency: add or fix optional "--" syntax
doc txt & -h consistency: fix mismatching labels
doc SYNOPSIS & -h: use "-" to separate words in labels, not "_"
...
Clarify that "the sentence after <area>: prefix does not begin with
a capital letter" rule applies only to the commit title.
* jc/use-of-uc-in-log-messages:
SubmittingPatches: use usual capitalization in the log message body
"git multi-pack-index repack/expire" used to repack unreachable
cruft into a new pack, which have been corrected.
cf. <63a1c3d4-eff3-af10-4263-058c88e74594@github.com>
* tb/midx-repack-ignore-cruft-packs:
midx.c: avoid cruft packs with non-zero `repack --batch-size`
midx.c: remove unnecessary loop condition
midx.c: replace `xcalloc()` with `CALLOC_ARRAY()`
midx.c: avoid cruft packs with `repack --batch-size=0`
midx.c: prevent `expire` from removing the cruft pack
Documentation/git-multi-pack-index.txt: clarify expire behavior
Documentation/git-multi-pack-index.txt: fix typo
Documentation on various Boolean GIT_* environment variables have
been clarified.
* jc/environ-docs:
environ: GIT_INDEX_VERSION affects not just a new repository
environ: simplify description of GIT_INDEX_FILE
environ: GIT_FLUSH should be made a usual Boolean
environ: explain Boolean environment variables
environ: document GIT_SSL_NO_VERIFY
We are interested in exploring whether gc.cruftPacks=true should become
the default value.
To determine whether it is safe to do so, let's encourage more users to
try it out.
Users who have set feature.experimental=true have already volunteered to
try new and possibly-breaking config changes, so let's try this new
default with that set of users.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Meta/redo-jch.sh script is generated a few lines earlier by running:
$ Meta/Reintegrate master..seen >Meta/redo-jch.sh
But the resulting script is not necessarily executable. Later mentions
of this script invoke it with sh (instead of directly), but this one is
an odd one out.
Update the documentation to invoke the Meta/redo-jch.sh script with sh
in case the maintainer has not made the script executable.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff rev^!" did not show combined diff to go to the rev from
its parents.
* rs/diff-caret-bang-with-parents:
diff: support ^! for merges
revisions.txt: unspecify order of resolved parts of ^!
revision: use strtol_i() for exclude_parent
Update CodingGuidelines to clarify what features to use and avoid
in C99.
* ab/coding-guidelines-c99:
CodingGuidelines: recommend against unportable C99 struct syntax
CodingGuidelines: mention C99 features we can't use
CodingGuidelines: allow declaring variables in for loops
CodingGuidelines: mention dynamic C99 initializer elements
CodingGuidelines: update for C99
During the initial development of the fsck-msgids.txt feature, it
has become apparent that it is very much error prone to make sure
the description in the documentation file are sorted and correctly
match what is in the fsck.h header file.
Add a quick-and-dirty Perl script and doc-lint target to sanity
check that the fsck-msgids.txt is consistent with the error type
list in the fsck.h header file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation lacks mention of specific <msg-id> that are supported.
While git-help --config will display a list of these options, often
developers' first instinct is to consult the git docs to find valid
config values.
Add a list of fsck error messages, and link to it from the git-fsck
documentation.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the recent turnover on the git-security list, questions came up how
things are usually run. Rather than answering questions individually,
extend Git's existing documentation about security vulnerabilities to
describe the git-security mailing list, how things are run on that list,
and what to expect throughout the process from the time a security bug
is reported all the way to the time when a fix is released.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Julia Ramer <gitprplr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are situations where the user might not want the default
setting where patch-id strips all whitespace. They might be working
in a language where white space is syntactically important, or they
might have CI testing that enforces strict whitespace linting. In
these cases, a whitespace change would result in the patch
fundamentally changing, and thus deserving of a different id.
Add a new mode that is exclusive of --stable and --unstable called
--verbatim. It also corresponds to the config
patchid.verbatim = true. In this mode, the stable algorithm is
used and whitespace is not stripped from the patch text.
Users of --unstable mainly care about compatibility with old git
versions, which unstripping the whitespace would break. Thus there
isn't a usecase for the combination of --verbatim and --unstable,
and we don't expose this so as to not add maintainence burden.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
fixes https://github.com/Skydio/revup/issues/2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to generating a shortlog based on committer, author, or the
identity in one or more specified trailers, it can be useful to generate
a shortlog based on an arbitrary commit format.
This can be used, for example, to generate a distribution of commit
activity over time, like so:
$ git shortlog --group='%cd' --date='format:%Y-%m' -s v2.37.0..
117 2022-06
274 2022-07
324 2022-08
263 2022-09
7 2022-10
Arbitrary commit formats can be used. In fact, `git shortlog`'s default
behavior (to count by commit authors) can be emulated as follows:
$ git shortlog --group='%aN <%aE>' ...
and future patches will make the default behavior (as well as
`--committer`, and `--group=trailer:<trailer>`) special cases of the
more flexible `--group` option.
Note also that the SHORTLOG_GROUP_FORMAT enum value is used only to
designate that `--group:<format>` is in use when in stdin mode to
declare that the combination is invalid.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare for a future patch which will introduce arbitrary pretty formats
via the `--group` argument.
To allow additional customizability (for example, to support something
like `git shortlog -s --group='%aD' --date='format:%Y-%m' ...` (which
groups commits by the datestring 'YYYY-mm' according to author date), we
must store off the `--date` parsed from calling `parse_revision_opt()`.
Note that this also affects custom output `--format` strings in `git
shortlog`. Though this is a behavior change, this is arguably fixing a
long-standing bug (ie., that `--format` strings are not affected by
`--date` specifiers as they should be).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pruning objects with `--cruft`, `git repack` offers some
flexibility when selecting the set of which objects are pruned via the
`--cruft-expiration` option.
This is useful for expiring objects which are older than the grace
period, making races where to-be-pruned objects become reachable and
then ancestors of freshly pushed objects, leaving the repository in a
corrupt state after pruning substantially less likely [1].
But in practice, such races are impossible to avoid entirely, no matter
how long the grace period is. To prevent this race, it is often
advisable to temporarily put a repository into a read-only state. But in
practice, this is not always practical, and so some middle ground would
be nice.
This patch introduces a new option, `--expire-to`, which teaches `git
repack` to write an additional cruft pack containing just the objects
which were pruned from the repository. The caller can specify a
directory outside of the current repository as the destination for this
second cruft pack.
This makes it possible to prune objects from a repository, while still
holding onto a supplemental copy of them outside of the original
repository. Having this copy on-disk makes it substantially easier to
recover objects when the aforementioned race is encountered.
`--expire-to` is implemented in a somewhat convoluted manner, which is
to take advantage of the fact that the first time `write_cruft_pack()`
is called, it adds the name of the cruft pack to the `names` string
list. That means the second time we call `write_cruft_pack()`, objects
in the previously-written cruft pack will be excluded.
As long as the caller ensures that no objects are expired during the
second pass, this is sufficient to generate a cruft pack containing all
objects which don't appear in any of the new packs written by `git
repack`, including the cruft pack. In other words, all of the objects
which are about to be pruned from the repository.
It is important to note that the destination in `--expire-to` does not
necessarily need to be a Git repository (though it can be) Notably, the
expired packs do not contain all ancestors of expired objects. So if the
source repository contains something like:
<unreachable>
/
C1 --- C2
\
refs/heads/master
where C2 is unreachable, but has a parent (C1) which is reachable, and
C2 would be pruned, then the expiry pack will contain only C2, not C1.
[1]: https://lore.kernel.org/git/20190319001829.GL29661@sigill.intra.peff.net/
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add global counters mechanism to Trace2.
The Trace2 counters mechanism adds the ability to create a set of
global counter variables and an API to increment them efficiently.
Counters can optionally report per-thread usage in addition to the sum
across all threads.
Counter events are emitted to the Trace2 logs when a thread exits and
at process exit.
Counters are an alternative to `data` and `data_json` events.
Counters are useful when you want to measure something across the life
of the process, when you don't want per-measurement events for
performance reasons, when the data does not fit conveniently within a
region, or when your control flow does not easily let you write the
final total. For example, you might use this to report the number of
calls to unzip() or the number of de-delta steps during a checkout.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add stopwatch timer mechanism to Trace2.
Timers are an alternative to Trace2 Regions. Regions are useful for
measuring the time spent in various computation phases, such as the
time to read the index, time to scan for unstaged files, time to scan
for untracked files, and etc.
However, regions are not appropriate in all places. For example,
during a checkout, it would be very inefficient to use regions to
measure the total time spent inflating objects from the ODB from
across the entire lifetime of the process; a per-unzip() region would
flood the output and significantly slow the command; and some form of
post-processing would be requried to compute the time spent in unzip().
Timers can be used to measure a series of timer intervals and emit
a single summary event (at thread and/or process exit).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eliminate the mostly obsolete `Public API` sub-section from the
`Trace2 API` section in the documentation. Strengthen the referral
to `trace2.h`.
Most of the technical information in this sub-section was moved to
`trace2.h` in 6c51cb525d (trace2: move doc to trace2.h, 2019-11-17) to
be adjacent to the function prototypes. The remaining text wasn't
that useful by itself.
Furthermore, the text would need a bit of overhaul to add routines
that do not immediately generate a message, such as stopwatch timers.
So it seemed simpler to just get rid of it.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce or eliminate use of the term "TLS" in the Trace2 code.
The term "TLS" has two popular meanings: "thread-local storage" and
"transport layer security". In the Trace2 source, the term is associated
with the former. There was concern on the mailing list about it refering
to the latter.
Update the source and documentation to eliminate the use of the "TLS" term
or replace it with the phrase "thread-local storage" to reduce ambiguity.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an option, --stdin, to merge-tree which will accept lines of input
with two branches to merge per line, and which will perform all the
merges and give output for each in turn. This option implies -z, and
modifies the output to also include a merge status since the exit code
of the program can no longer convey that information now that multiple
merges are involved.
This could be useful, for example, by Git hosting providers. When one
branch is updated, one may want to check whether all code reviews
targetting that branch can still cleanly merge. Avoiding the overhead
of starting up a separate process for each of those code reviews might
provide significant savings in a repository with many code reviews.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Informational Messages was updated in de90581141 ("merge-ort:
optionally produce machine-readable output", 2022-06-18) to provide more
detailed and machine parseable output when `-z` is passed, but the
Documentation was not updated to reflect these changes. Update it now.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
William Sprent