Two configuration variables about SSL authentication material that
weren't mentioned in the documentations are now mentioned.
* ac/doc-http-ssl-type-config:
docs: indicate http.sslCertType and sslKeyType
Since 183ea3ea (Merge branch 'ps/mingw-rename', 2024-11-13),
a new technique is used on Windows to rename files, where supported.
The first step of this technique is to open the file with
`CreateFileW`. At that time, `FILE_ATTRIBUTE_NORMAL` was passed as
the value of the `dwFlagsAndAttributes` argument. In b30404df [2], this
was improved by passing `FILE_FLAG_BACKUP_SEMANTICS`, to support
directories as well as regular files.
However, neither value of `dwFlagsAndAttributes` is sufficient to open
a symbolic link with the correct semantics to rename it. Symlinks on
Windows are reparse points. Attempting to open a reparse point with
`CreateFileW` dereferences the reparse point and opens the target
instead, unless `FILE_FLAG_OPEN_REPARSE_POINT` is included in
`dwFlagsAndAttributes`. This is documented for that flag and in the
"Symbolic Link Behavior" section of the `CreateFileW` docs [3].
This produces a regression where attempting to rename a symlink on
Windows renames its target to the intended new name and location of the
symlink. For example, if `symlink` points to `file`, then running
git mv symlink symlink-renamed
leaves `symlink` in place and unchanged, but renames `file` to
`symlink-renamed` [4].
This regression is detectable by existing tests in `t7001-mv.sh`, but
the tests must be run by a Windows user with the ability to create
symlinks, and the `ln -s` command used to create the initial symlink
must also be able to create a real symlink (such as by setting the
`MSYS` environment variable to `winsymlinks:nativestrict`). Then
these two tests fail if the regression is present, and pass otherwise:
38 - git mv should overwrite file with a symlink
39 - check moved symlink
Let's fix this, so that renaming a symlink again renames the symlink
itself and leaves the target unchanged, by passing
FILE_FLAG_BACKUP_SEMANTICS | FILE_FLAG_OPEN_REPARSE_POINT
as the `dwFlagsAndAttributes` argument. This is sufficient (and safe)
because including `FILE_FLAG_OPEN_REPARSE_POINT` causes no harm even
when used to open a file or directory that is not a reparse point. In
that case, as noted in [3], this flag is simply ignored.
[1]: 183ea3eabf
[2]: b30404dfc0
[3]: https://learn.microsoft.com/en-us/windows/win32/api/fileapi/nf-fileapi-createfilew
[4]: https://github.com/git-for-windows/git/issues/5436
Signed-off-by: Eliah Kagan <eliah.kagan@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git refs migrate" subcommand converts the backend used for ref
storage. It always migrates reflog data as well as refs. Introduce an
option to exclude reflogs from migration, allowing them to be discarded
when they are unnecessary.
This is particularly useful in server-side repositories, where reflogs
are typically not expected. However, some repositories may still have
them due to historical reasons, such as bugs, misconfigurations, or
administrative decisions to enable reflogs for debugging. In such
repositories, it would be optimal to drop reflogs during the migration.
To address this, introduce the '--no-reflog' flag, which prevents reflog
migration. When this flag is used, reflogs from the original reference
backend are migrated. Since only the new reference backend remains in
the repository, all previous reflogs are permanently discarded.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wire up credential helpers in our CI runs so that we can rest assured
that they compile and (if tests are available) function correctly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The musl-based Meson job is supposed to explicitly specify the UTF-8
locale used for testing, which has been introduced with 84bb5eeace (ci:
switch linux-musl to use Meson, 2025-01-28). That commit had two issues
though:
- We continue to refer to "linux-musl", even though the job has been
renamed in the same commit to "linux-musl-meson".
- We use the wrong option name to specify the locale. This was not
noticed though due to the first issue.
Fix both of these issues by fixing both the job and option naems.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of https://github.com/j6t/gitk:
gitk: introduce support for the Meson build system
gitk: extract script to build executable
gitk: make the "list references" default window width wider
gitk: fix arrow keys in input fields with Tcl/Tk >= 8.6
gitk: Use an external icon file on Windows
gitk: Unicode file name support
gitk(Windows): avoid inadvertently calling executables in the worktree
* 'pks-meson-support' of https://github.com/pks-t/gitk:
gitk: introduce support for the Meson build system
gitk: extract script to build executable
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
* 'g4w-gitk' of https://github.com/dscho/gitk:
gitk: make the "list references" default window width wider
gitk: fix arrow keys in input fields with Tcl/Tk >= 8.6
gitk: Use an external icon file on Windows
gitk: Unicode file name support
gitk(Windows): avoid inadvertently calling executables in the worktree
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Upstream Git has introduced support for the Meson build system.
Introduce support for Meson into gitk, as well, so that Git can easily
build its vendored copy of Gitk via a `subproject()` directive. The
instructions can be set up as follows:
$ meson setup build
$ meson compile -C build
$ meson install -C build
Specific options, like for example where Gitk shall be installed to, can
be specified at setup time via `-D`. Available options can be discovered
by running `meson configure` either in the source or build directory.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
As some issues that can happen with a Git client can be operating system
specific, it can be useful for a server to know which OS a client is
using. In the same way it can be useful for a client to know which OS
a server is using.
Our current agent capability is in the form of "package/version" (e.g.,
"git/1.8.3.1"). Let's extend it to include the operating system name (os)
i.e in the form "package/version-os" (e.g., "git/1.8.3.1-Linux").
Including OS details in the agent capability simplifies implementation,
maintains backward compatibility, avoids introducing a new capability,
encourages adoption across Git-compatible software, and enhances
debugging by providing complete environment information without affecting
functionality. The operating system name is retrieved using the 'sysname'
field of the `uname(2)` system call or its equivalent.
However, there are differences between `uname(1)` (command-line utility)
and `uname(2)` (system call) outputs on Windows. These discrepancies
complicate testing on Windows platforms. For example:
- `uname(1)` output: MINGW64_NT-10.0-20348.3.4.10-87d57229.x86_64\
.2024-02-14.20:17.UTC.x86_64
- `uname(2)` output: Windows.10.0.20348
On Windows, uname(2) is not actually system-supplied but is instead
already faked up by Git itself. We could have overcome the test issue
on Windows by implementing a new `uname` subcommand in `test-tool`
using uname(2), but except uname(2), which would be tested against
itself, there would be nothing platform specific, so it's just simpler
to disable the tests on Windows.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Usman Akinyemi <usmanakinyemi202@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command `perl --version` says, e.g., “This is perl 5, version 26,
subversion 0 (v5.26.0)”, which older versions of Meson interpret as
version 26.
This will be fixed in Meson 1.7.0, but at the time of writing that isn’t
yet released.
If we run `perl -V:version` we get the unambiguous response
“version='5.26.0';”, but we need at least Meson 1.5.0 to be able to do that.
Note that Perl are seriously considering dropping the leading 5 entirely
in the near future (https://perl.github.io/PPCs/ppc0025-perl-version/),
but that shouldn’t affect us.
Signed-off-by: Peter Oliver <git@mavit.org.uk>
Co-authored-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 702d8c1f3b (Require Perl 5.26.0, 2024-10-23) dropped support
for Perl versions older than 5.26.0. The Meson build system, which
has been developed in parallel to that commit, hasn't been bumped
accordingly and thus still requires Perl 5.8.1 or newer.
Fix this by requiring Perl 5.26.0 or newer with Meson.
Signed-off-by: Peter Oliver <git@mavit.org.uk>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git difftool" code clean-up.
* da/difftool-sans-the-repository:
difftool: eliminate use of USE_THE_REPOSITORY_VARIABLE
difftool: eliminate use of the_repository
difftool: eliminate use of global variables
"git rev-list --missing=" learned to accept "print-info" that gives
known details expected of the missing objects, like path and type.
* jt/rev-list-missing-print-info:
rev-list: extend print-info to print missing object type
rev-list: add print-info action to print missing object path
"git push --atomic --porcelain" used to ignore failures from the
other side, losing the error status from the child process, which
has been corrected.
* ps/send-pack-unhide-error-in-atomic-push:
send-pack: gracefully close the connection for atomic push
t5543: atomic push reports exit code failure
send-pack: new return code "ERROR_SEND_PACK_BAD_REF_STATUS"
t5548: add porcelain push test cases for dry-run mode
t5548: add new porcelain test cases
t5548: refactor test cases by resetting upstream
t5548: refactor to reuse setup_upstream() function
t5504: modernize test by moving heredocs into test bodies
Lazy-loading missing files in a blobless clone on demand is costly
as it tends to be one-blob-at-a-time. "git backfill" is introduced
to help bulk-download necessary files beforehand.
* ds/backfill:
backfill: assume --sparse when sparse-checkout is enabled
backfill: add --sparse option
backfill: add --min-batch-size=<n> option
backfill: basic functionality and tests
backfill: add builtin boilerplate
Wire up static analysis via Coccinelle via a new test target
"coccicheck". This target can be executed via `meson compile coccicheck`
and generates the semantic patch for us.
Note that we don't hardcode the list of source and header files that
shall be analyzed, and instead use git-ls-files(1) to find them for us.
This is because we also want to analyze files that may not get built on
the current platform, so finding all sources at configure time is easier
than introducing a new variable that tracks all sources, including those
which aren't being built.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've got a couple of credential helpers in "contrib/credential", all
of which aren't yet wired up via Meson. Do so.
Note that ideally, we'd also wire up t0303 to be executed with each of
the credential helpers to verify their functionality. Unfortunately
though, none of them pass the test suite right now, so this is left for
a future change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "osxkeychain" helper does not compile due to a warning generated by
the unused `argc` parameter. Fix the warning by checking for the minimum
number of required arguments explicitly in the least restrictive way
possible.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "libsecret" credential helper does not compile when developer
warnings are enabled due to three warnings:
- contrib/credential/libsecret/git-credential-libsecret.c:78:1:
missing initializer for field ‘reserved’ of ‘SecretSchema’
[-Werror=missing-field-initializers]. This issue is fixed by using
designated initializers.
- contrib/credential/libsecret/git-credential-libsecret.c:171:43:
comparison of integer expressions of different signedness: ‘int’
and ‘guint’ {aka ‘unsigned int’} [-Werror=sign-compare]. This
issue is fixed by using an unsigned variable to iterate through
the string vector.
- contrib/credential/libsecret/git-credential-libsecret.c:420:14:
unused parameter ‘argc’ [-Werror=unused-parameter]. This issue is
fixed by checking the number of arguments, but in the least
restrictive way possible.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-credential-wincred helper does not compile on Windows with
Microsoft Visual Studio because of our use of `__attribute__()`, which
its compiler doesn't support. While the rest of our codebase would know
to handle this because we redefine the macro in "compat/msvc.h", this
stub isn't available here because we don't include "git-compat-util.h"
in the first place.
Fix the issue by making the attribute depend on the `_MSC_VER`
preprocessor macro.
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests of the "netrc" credential helper aren't prepared to handle
out-of-tree builds:
- They expect the "test.pl" script to be located relative to the build
directory, even though it is located in the source directory.
- They expect the built "git-credential-netrc" helper to be located
relative to the "test.pl" file, evne though it is loated in the
build directory.
This works alright as long as source and build directories are the same,
but starts to break apart with Meson.
Fix these first issue by using the new "GIT_SOURCE_DIR" variable to
locate the test script itself. And fix the second issue by introducing a
new environment variable "CREDENTIAL_NETRC_PATH" that can be set for
out-of-tree builds to locate the built credential helper.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of our tests require knowledge around where to find the
project's source directory in order to locate files required for the
test itself. Until now we have been wiring these up ad-hoc via new,
specialized variables catered to the specific usecase. This is quite
awkward though, as every test that potentially needs to locate paths
relative to the source directory needs to grow another variable.
Introduce a new "GIT_SOURCE_DIR" variable into GIT-BUILD-OPTIONS to stop
this proliferation. Remove existing variables that can be derived from
it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous commit introduced a "promisor.acceptFromServer" configuration
variable with only "None" or "All" as valid values.
Let's introduce "KnownName" and "KnownUrl" as valid values for this
configuration option to give more choice to a client about which
promisor remotes it might accept among those that the server advertised.
In case of "KnownName", the client will accept promisor remotes which
are already configured on the client and have the same name as those
advertised by the client. This could be useful in a corporate setup
where servers and clients are trusted to not switch names and URLs, but
where some kind of control is still useful.
In case of "KnownUrl", the client will accept promisor remotes which
have both the same name and the same URL configured on the client as the
name and URL advertised by the server. This is the most secure option,
so it should be used if possible.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a server S knows that some objects from a repository are available
from a promisor remote X, S might want to suggest to a client C cloning
or fetching the repo from S that C may use X directly instead of S for
these objects.
Note that this could happen both in the case S itself doesn't have the
objects and borrows them from X, and in the case S has the objects but
knows that X is better connected to the world (e.g., it is in a
$LARGEINTERNETCOMPANY datacenter with petabit/s backbone connections)
than S. Implementation of the latter case, which would require S to
omit in its response the objects available on X, is left for future
improvement though.
Then C might or might not, want to get the objects from X. If S and C
can agree on C using X directly, S can then omit objects that can be
obtained from X when answering C's request.
To allow S and C to agree and let each other know about C using X or
not, let's introduce a new "promisor-remote" capability in the
protocol v2, as well as a few new configuration variables:
- "promisor.advertise" on the server side, and:
- "promisor.acceptFromServer" on the client side.
By default, or if "promisor.advertise" is set to 'false', a server S will
not advertise the "promisor-remote" capability.
If S doesn't advertise the "promisor-remote" capability, then a client C
replying to S shouldn't advertise the "promisor-remote" capability
either.
If "promisor.advertise" is set to 'true', S will advertise its promisor
remotes with a string like:
promisor-remote=<pr-info>[;<pr-info>]...
where each <pr-info> element contains information about a single
promisor remote in the form:
name=<pr-name>[,url=<pr-url>]
where <pr-name> is the urlencoded name of a promisor remote and
<pr-url> is the urlencoded URL of the promisor remote named <pr-name>.
For now, the URL is passed in addition to the name. In the future, it
might be possible to pass other information like a filter-spec that the
client may use when cloning from S, or a token that the client may use
when retrieving objects from X.
It is C's responsibility to arrange how it can reach X though, so pieces
of information that are usually outside Git's concern, like proxy
configuration, must not be distributed over this protocol.
It might also be possible in the future for "promisor.advertise" to have
other values. For example a value like "onlyName" could prevent S from
advertising URLs, which could help in case C should use a different URL
for X than the URL S is using. (The URL S is using might be an internal
one on the server side for example.)
By default or if "promisor.acceptFromServer" is set to "None", C will
not accept to use the promisor remotes that might have been advertised
by S. In this case, C will not advertise any "promisor-remote"
capability in its reply to S.
If "promisor.acceptFromServer" is set to "All" and S advertised some
promisor remotes, then on the contrary, C will accept to use all the
promisor remotes that S advertised and C will reply with a string like:
promisor-remote=<pr-name>[;<pr-name>]...
where the <pr-name> elements are the urlencoded names of all the
promisor remotes S advertised.
In a following commit, other values for "promisor.acceptFromServer" will
be implemented, so that C will be able to decide the promisor remotes it
accepts depending on the name and URL it received from S. So even if
that name and URL information is not used much right now, it will be
needed soon.
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pickaxe options, -G and -S, need either a regex or a string to look
through the history for. An empty value isn't very useful since it
would either match everything or nothing, and what's worse, we presently
crash with a BUG like so when the user provides one:
BUG: diffcore-pickaxe.c:241: should have needle under -G or -S
Since it's not very nice of us to crash and this wouldn't do anything
useful anyway, let's simply inform the user that they must provide a
non-empty argument and exit with an error if they provide an empty one
instead.
Reported-by: Jared Van Bortel <cebtenzzre@gmail.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first line of a commit message is variously called 'title' or
'subject'.
Prefer 'title' unless discussing email.
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the html documentation the link to the "OUTPUT" section is surrounded
by square brackets. Fix this by adding explicit link text to the cross
reference.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a section for --stdin in the list of options and document that it
implies -z so readers know how to parse the output. Also correct the
merge status documentation for --stdin as if the status is less than
zero "git merge-tree" dies before printing it.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 9c93ba4d0a (merge-recursive: honor diff.algorithm, 2024-07-13)
replaced init_merge_options() with init_basic_merge_config() for use in
plumbing commands and init_ui_merge_config() for use in porcelain
commands. As "git merge-tree" is a plumbing command it should call
init_basic_merge_config() rather than init_ui_merge_config(). The merge
ort machinery ignores "diff.algorithm" so the behavior is unchanged by
this commit but it future proofs us against any future changes to
init_ui_merge_config().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
real_merge() only ever returns "0" or "1" as it dies if the merge status
is less than zero. Therefore the check for "result < 0" is redundant and
the result variable is not needed. The return value of real_merge() is
ignored because exit status of "git merge-tree --stdin" is "0" for both
successful and conflicted merges (the status of each merge is written to
stdout). The return type of real_merge() is not changed as it is used
for the program's exit status when "--stdin" is not given.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a process tries to read the output from "git merge-tree --stdin"
before it closes merge-tree's stdin then it deadlocks. This happens
because merge-tree does not flush its output before trying to read
another line of input and means that it is not possible to cherry-pick a
sequence of commits using "git merge-tree --stdin". Fix this by calling
maybe_flush_or_die() before trying to read the next line of
input. Flushing the output after each merge does not seem to affect the
performance, any difference is lost in the noise even after increasing
the number of runs.
$ git rev-list --merges --parents -n100 origin/master |
sed 's/^[^ ]* //' >/tmp/merges
$ hyperfine -L flush 0,1 --warmup 1 --runs 30 \
'GIT_FLUSH={flush} ./git merge-tree --stdin </tmp/merges'
Benchmark 1: GIT_FLUSH=0 ./git merge-tree --stdin </tmp/merges
Time (mean ± σ): 546.6 ms ± 11.7 ms [User: 503.2 ms, System: 40.9 ms]
Range (min … max): 535.9 ms … 567.7 ms 30 runs
Benchmark 2: GIT_FLUSH=1 ./git merge-tree --stdin </tmp/merges
Time (mean ± σ): 546.9 ms ± 12.0 ms [User: 505.9 ms, System: 38.9 ms]
Range (min … max): 529.8 ms … 570.0 ms 30 runs
Summary
'GIT_FLUSH=0 ./git merge-tree --stdin </tmp/merges' ran
1.00 ± 0.03 times faster than 'GIT_FLUSH=1 ./git merge-tree --stdin </tmp/merges'
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename `match_name_with_pattern()` to `match_refname_with_pattern()` to
better reflect its purpose and improve documentation comment clarity.
The previous function name and parameter names were inconsistent, making
it harder to understand their roles in refspec matching.
- Rename parameters:
- `key` -> `pattern` (globbing pattern to match)
- `name` -> `refname` (refname to check)
- `value` -> `replacement` (replacement mapping pattern)
Signed-off-by: Meet Soni <meetsoni3017@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the "test capability advertisement" test creates some files
with expected content which are used by other tests below it.
To remove that side-effect from this test, let's split up part of
it into a "setup"-type test which creates the files with expected content
which gets reused by multiple tests. This will be useful in a following
commit.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Usman Akinyemi <usmanakinyemi202@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, get_uname_info() function provides the full OS information.
In a following commit, we will need it to provide only the OS name.
Let's extend it to accept a "full" flag that makes it switch between
providing full OS information and providing only the OS name.
We may need to refactor this function in the future if an
`osVersion.format` is added.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Usman Akinyemi <usmanakinyemi202@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some code from "builtin/bugreport.c" uses uname(2) to get system
information.
Let's refactor this code into a new get_uname_info() function, so
that we can reuse it in a following commit.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Usman Akinyemi <usmanakinyemi202@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git_user_agent_sanitized() function performs some sanitizing to
avoid special characters being sent over the line and possibly messing
up with the protocol or with the parsing on the other side.
Let's extract this sanitizing into a new redact_non_printables() function,
as we will want to reuse it in a following patch.
For now the new redact_non_printables() function is still static as
it's only needed locally.
While at it, let's use strbuf_detach() to explicitly detach the string
contained by the 'buf' strbuf.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Usman Akinyemi <usmanakinyemi202@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the isprint() function checks for printable characters, let's
replace the existing hardcoded ASCII checks with it. However, since
the original checks also handled spaces, we need to account for spaces
explicitly in the new check.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Usman Akinyemi <usmanakinyemi202@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explicitly set the default goal at the very top of various makefiles.
This is already present in some makefiles, but not all of them.
In particular, this corrects a regression introduced in a38edab7c8
(Makefile: generate doc versions via GIT-VERSION-GEN, 2024-12-06). That
commit added some config files as build targets for the Documentation
directory, and put the target configuration in a sensible place.
Unfortunately, that sensible place was above any other build target
definitions, meaning the default goal changed to being those
configuration files only, rather than the HTML and man page
documentation.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* kn/reflog-migration-fix-followup:
reftable: prevent 'update_index' changes after adding records
refs: use 'uint64_t' for 'ref_update.index'
refs: mark `ref_transaction_update_reflog()` as static
Junio C Hamano