kernel/git - git - PowerEL Git System

Commit Graph

Author	SHA1	Message	Date
Derrick Stolee	5af8039452	commit-graph: collapse parameters into flags The write_commit_graph() and write_commit_graph_reachable() methods currently take two boolean parameters: 'append' and 'report_progress'. As we update these methods, adding more parameters this way becomes cluttered and hard to maintain. Collapse these parameters into a 'flags' parameter, and adjust the callers to provide flags as necessary. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago
Derrick Stolee	e103f7276f	commit-graph: return with errors during write The write_commit_graph() method uses die() to report failure and exit when confronted with an unexpected condition. This use of die() in a library function is incorrect and is now replaced by error() statements and an int return type. Return zero on success and a negative value on failure. Now that we use 'goto cleanup' to jump to the terminal condition on an error, we have new paths that could lead to uninitialized values. New initializers are added to correct for this. The builtins 'commit-graph', 'gc', and 'commit' call these methods, so update them to check the return value. Test that 'git commit-graph write' returns a proper error code when hitting a failure condition in write_commit_graph(). Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago
Ævar Arnfjörð Bjarmason	7b8ce9c673	commit-graph verify: detect inability to read the graph Change "commit-graph verify" to error on open() failures other than ENOENT. As noted in the third paragraph of `283e68c72f` ("commit-graph: add 'verify' subcommand", 2018-06-27) and the test it added it's intentional that "commit-graph verify" doesn't error out when the file doesn't exist. But let's not be overly promiscuous in what we accept. If we can't read the file for other reasons, e.g. permission errors, bad file descriptor etc. we'd like to report an error to the user. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago
Ævar Arnfjörð Bjarmason	67a530fab3	commit-graph: don't pass filename to load_commit_graph_one_fd_st() An earlier change implemented load_commit_graph_one_fd_st() in a way that was bug-compatible with earlier code in terms of the "graph file %s is too small" error message printing out the path to the commit-graph (".git/objects/info/commit-graph"). But change that, because: * A function that takes an already-open file descriptor also needing the filename isn't very intuitive. * The vast majority of errors we might emit when loading the graph come from parse_commit_graph(), which doesn't report the filename. Let's not do that either in this case for consistency. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago
Ævar Arnfjörð Bjarmason	61df89c8e5	commit-graph: don't early exit(1) on e.g. "git status" Make the commit-graph loading code work as a library that returns an error code instead of calling exit(1) when the commit-graph is corrupt. This means that e.g. "status" will now report commit-graph corruption as an "error: [...]" at the top of its output, but then proceed to work normally. This required splitting up the load_commit_graph_one() function so that the code that deals with open()-ing and stat()-ing the graph can now be called independently as open_commit_graph(). This is needed because "commit-graph verify" where the graph doesn't exist isn't an error. See the third paragraph in `283e68c72f` ("commit-graph: add 'verify' subcommand", 2018-06-27). There's a bug in that logic where we conflate the intended ENOENT with other errno values (e.g. EACCES), but this change doesn't address that. That'll be addressed in a follow-up change. I'm then splitting most of the logic out of load_commit_graph_one() into load_commit_graph_one_fd_st(), which allows for providing an existing file descriptor and stat information to the loading code. This isn't strictly needed, but it would be redundant and confusing to open() and stat() the file twice for some of the codepaths, this allows for calling open_commit_graph() followed by load_commit_graph_one_fd_st(). The "graph_file" still needs to be passed to that function for the the "graph file %s is too small" error message. This leaves load_commit_graph_one() unused by everything except the internal prepare_commit_graph_one() function, so let's mark it as "static". If someone needs it in the future we can remove the "static" attribute. I could also rewrite its sole remaining user ("prepare_commit_graph_one()") to use load_commit_graph_one_fd_st() instead, but let's leave it at this. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago
SZEDER Gábor	5af7417bd8	commit-graph: rename "large edges" to "extra edges" The optional 'Large Edge List' chunk of the commit graph file stores parent information for commits with more than two parents, and the names of most of the macros, variables, struct fields, and functions related to this chunk contain the term "large edges", e.g. write_graph_chunk_large_edges(). However, it's not a really great term, as the edges to the second and subsequent parents stored in this chunk are not any larger than the edges to the first and second parents stored in the "main" 'Commit Data' chunk. It's the number of edges, IOW number of parents, that is larger compared to non-merge and "regular" two-parent merge commits. And indeed, two functions in 'commit-graph.c' have a local variable called 'num_extra_edges' that refer to the same thing, and this "extra edges" term is much better at describing these edges. So let's rename all these references to "large edges" in macro, variable, function, etc. names to "extra edges". There is a GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency rename it to GRAPH_EXTRA_EDGES_NEEDED. We can do so safely without causing any incompatibility issues, because the term "large edges" doesn't come up in the file format itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there is no 'L' in there), but only in the specification text. The string "large edges", however, does come up in the output of 'git commit-graph read' and in tests looking at its input, but that command is explicitly documented as debugging aid, so we can change its output and the affected tests safely. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago
Martin Ågren	0bfb48e672	builtin/commit-graph.c: UNLEAK variables `graph_verify()`, `graph_read()` and `graph_write()` do the hard work of `cmd_commit_graph()`. As soon as these return, so does `cmd_commit_graph()`. `strbuf_getline()` may allocate memory in the strbuf, yet return EOF. We need to release the strbuf or UNLEAK it. Go for the latter since we are close to returning from `graph_write()`. `graph_write()` also fails to free the strings in the string list. They have been added to the list with `strdup_strings` set to 0. We could flip `strdup_strings` before clearing the list, which is our usual hack in situations like this. But since we are about to exit, let's just UNLEAK the whole string list instead. UNLEAK `graph` in `graph_verify`. While at it, and for consistency, UNLEAK in `graph_read()` as well, and remove an unnecessary UNLEAK just before dying. Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	7 years ago
Ævar Arnfjörð Bjarmason	7b0f229222	commit-graph write: add progress output Before this change the "commit-graph write" command didn't report any progress. On my machine this command takes more than 10 seconds to write the graph for linux.git, and around 1m30s on the 2015-04-03-1M-git.git[1] test repository (a test case for a large monorepository). Furthermore, since the gc.writeCommitGraph setting was added in `d5d5d7b641` ("gc: automatically write commit-graph files", 2018-06-27), there was no indication at all from a "git gc" run that anything was different. This why one of the progress bars being added here uses start_progress() instead of start_delayed_progress(), so that it's guaranteed to be seen. E.g. on my tiny 867 commit dotfiles.git repository: $ git -c gc.writeCommitGraph=true gc Enumerating objects: 2821, done. [...] Computing commit graph generation numbers: 100% (867/867), done. On larger repositories, such as linux.git the delayed progress bar(s) will kick in, and we'll show what's going on instead of, as was previously happening, printing nothing while we write the graph: $ git -c gc.writeCommitGraph=true gc [...] Annotating commits in commit graph: 1565573, done. Computing commit graph generation numbers: 100% (782484/782484), done. Note that here we don't show "Finding commits for commit graph", this is because under "git gc" we seed the search with the commit references in the repository, and that set is too small to show any progress, but would e.g. on a smaller repo such as git.git with --stdin-commits: $ git rev-list --all \| git -c gc.writeCommitGraph=true write --stdin-commits Finding commits for commit graph: 100% (162576/162576), done. Computing commit graph generation numbers: 100% (162576/162576), done. With --stdin-packs we don't show any estimation of how much is left to do. This is because we might be processing more than one pack. We could be less lazy here and show progress, either by detecting that we're only processing one pack, or by first looping over the packs to discover how many commits they have. I don't see the point in doing that work. So instead we get (on 2015-04-03-1M-git.git): $ echo pack-<HASH>.idx \| git -c gc.writeCommitGraph=true --exec-path=$PWD commit-graph write --stdin-packs Finding commits for commit graph: 13064614, done. Annotating commits in commit graph: 3001341, done. Computing commit graph generation numbers: 100% (1000447/1000447), done. No GC mode uses --stdin-packs. It's what they use at Microsoft to manually compute the generation numbers for their collection of large packs which are never coalesced. The reason we need a "report_progress" variable passed down from "git gc" is so that we don't report this output when we're running in the process "git gc --auto" detaches from the terminal. Since we write the commit graph from the "git gc" process itself (as opposed to what we do with say the "git repack" phase), we'd end up writing the output to .git/gc.log and reporting it to the user next time as part of the "The last gc run reported the following[...]" error, see `329e6e8794` ("gc: save log from daemonized gc --auto and print it next time", 2015-09-19). So we must keep track of whether or not we're running in that demonized mode, and if so print no progress. See [2] and subsequent replies for a discussion of an approach not taken in compute_generation_numbers(). I.e. we're saying "Computing commit graph generation numbers", even though on an established history we're mostly skipping over all the work we did in the past. This is similar to the white lie we tell in the "Writing objects" phase (not all are objects being written). Always showing progress is considered more important than accuracy. I.e. on a repository like 2015-04-03-1M-git.git we'd hang for 6 seconds with no output on the second "git gc" if no changes were made to any objects in the interim if we'd take the approach in [2]. 1. https://github.com/avar/2015-04-03-1M-git 2. <c6960252-c095-fb2b-e0bc-b1e6bb261614@gmail.com> (https://public-inbox.org/git/c6960252-c095-fb2b-e0bc-b1e6bb261614@gmail.com/) Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	7 years ago
Derrick Stolee	d6538246d3	commit-graph: not compatible with replace objects Create new method commit_graph_compatible(r) to check if a given repository r is compatible with the commit-graph feature. Fill the method with a check to see if replace-objects exist. Test this interaction succeeds, including ignoring an existing commit-graph and failing to write a new commit-graph. However, we do ensure that we write a new commit-graph by setting read_replace_refs to 0, thereby ignoring the replace refs. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	7 years ago
Jonathan Tan	c3756d5b7f	commit-graph: add free_commit_graph Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	7 years ago
Derrick Stolee	59fb87701f	commit-graph: add '--reachable' option When writing commit-graph files, it can be convenient to ask for all reachable commits (starting at the ref set) in the resulting file. This is particularly helpful when writing to stdin is complicated, such as a future integration with 'git gc'. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	7 years ago
Derrick Stolee	d88b14b3fd	commit-graph: use string-list API for input Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	7 years ago
Derrick Stolee	283e68c72f	commit-graph: add 'verify' subcommand If the commit-graph file becomes corrupt, we need a way to verify that its contents match the object database. In the manner of 'git fsck' we will implement a 'git commit-graph verify' subcommand to report all issues with the file. Add the 'verify' subcommand to the 'commit-graph' builtin and its documentation. The subcommand is currently a no-op except for loading the commit-graph into memory, which may trigger run-time errors that would be caught by normal use. Add a simple test that ensures the command returns a zero error code. If no commit-graph file exists, this is an acceptable state. Do not report any errors. Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	7 years ago
Derrick Stolee	883e5c7fe9	commit-graph: UNLEAK before die() Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	7 years ago
Derrick Stolee	7547b95b4f	commit-graph: implement "--append" option Teach git-commit-graph to add all commits from the existing commit-graph file to the file about to be written. This should be used when adding new commits without performing garbage collection. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	7 years ago
Derrick Stolee	3d5df01b5e	commit-graph: build graph from starting commits Teach git-commit-graph to read commits from stdin when the --stdin-commits flag is specified. Commits reachable from these commits are added to the graph. This is a much faster way to construct the graph than inspecting all packed objects, but is restricted to known tips. For the Linux repository, 700,000+ commits were added to the graph file starting from 'master' in 7-9 seconds, depending on the number of packfiles in the repo (1, 24, or 120). Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	7 years ago
Derrick Stolee	049d51a2bb	commit-graph: read only from specific pack-indexes Teach git-commit-graph to inspect the objects only in a certain list of pack-indexes within the given pack directory. This allows updating the commit graph iteratively. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	7 years ago
Derrick Stolee	2a2e32bdc5	commit-graph: implement git commit-graph read Teach git-commit-graph to read commit graph files and summarize their contents. Use the read subcommand to verify the contents of a commit graph file in the tests. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	7 years ago
Derrick Stolee	f237c8b6fe	commit-graph: implement git-commit-graph write Teach git-commit-graph to write graph files. Create new test script to verify this command succeeds without failure. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	7 years ago
Derrick Stolee	4ce58ee38d	commit-graph: create git-commit-graph builtin Teach git the 'commit-graph' builtin that will be used for writing and reading packed graph files. The current implementation is mostly empty, except for an '--object-dir' option. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	7 years ago

22 Commits (f0596ecc8de9bdbdfc394b2f153ff67f64fc4615)