We used to trigger the special case "things not in origin"
semantics only when one and only one positive ref is given, and
no number (e.g. "git format-patch -4 origin") was specified, and
used the general revision range semantics for everything else.
This narrows the special case a bit more, by making:
git format-patch --root this_version
to show everything that leads to the named commit.
More importantly, document the two different semantics better.
The generic revision range semantics came later and bolted on
without being clearly documented.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because the --pretty can be given as --pretty=email which historically produced
mails with patches. IOW, exactly what git-format-patch does.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change lets you use the format.subjectprefix config option to override the
default subject prefix.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This defines xdup() and xfdopen() in git-compat-util.h to give
us error-catching variants of them without cluttering the code
too much.
Signed-off-by: Jim Meyering <jim@meyering.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ok, I've really held off doing this too damn long, because I'm lazy, and I
was always hoping that somebody else would do it.
But no, people keep asking for it, but nobody actually did anything, so I
decided I might as well bite the bullet, and instead of telling people
they could add a "--follow" flag to "git log" to do what they want to do,
I decided that it looks like I just have to do it for them..
The code wasn't actually that complicated, in that the diffstat for this
patch literally says "70 insertions(+), 1 deletions(-)", but I will have
to admit that in order to get to this fairly simple patch, you did have to
know and understand the internal git diff generation machinery pretty
well, and had to really be able to follow how commit generation interacts
with generating patches and generating the log.
So I suspect that while I was right that it wasn't that hard, I might have
been expecting too much of random people - this patch does seem to be
firmly in the core "Linus or Junio" territory.
To make a long story short: I'm sorry for it taking so long until I just
did it.
I'm not going to guarantee that this works for everybody, but you really
can just look at the patch, and after the appropriate appreciative noises
("Ooh, aah") over how clever I am, you can then just notice that the code
itself isn't really that complicated.
All the real new code is in the new "try_to_follow_renames()" function. It
really isn't rocket science: we notice that the pathname we were looking
at went away, so we start a full tree diff and try to see if we can
instead make that pathname be a rename or a copy from some other previous
pathname. And if we can, we just continue, except we show *that*
particular diff, and ever after we use the _previous_ pathname.
One thing to look out for: the "rename detection" is considered to be a
singular event in the _linear_ "git log" output! That's what people want
to do, but I just wanted to point out that this patch is *not* carrying
around a "commit,pathname" kind of pair and it's *not* going to be able to
notice the file coming from multiple *different* files in earlier history.
IOW, if you use "git log --follow", then you get the stupid CVS/SVN kind
of "files have single identities" kind of semantics, and git log will just
pick the identity based on the normal move/copy heuristics _as_if_ the
history could be linearized.
Put another way: I think the model is broken, but given the broken model,
I think this patch does just about as well as you can do. If you have
merges with the same "file" having different filenames over the two
branches, git will just end up picking _one_ of the pathnames at the point
where the newer one goes away. It never looks at multiple pathnames in
parallel.
And if you understood all that, you probably didn't need it explained, and
if you didn't understand the above blathering, it doesn't really mtter to
you. What matters to you is that you can now do
git log -p --follow builtin-rev-list.c
and it will find the point where the old "rev-list.c" got renamed to
"builtin-rev-list.c" and show it as such.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally we had 16kB limit when formatting log messages for
output, because it was easier to arrange for the caller to have
a reasonably big buffer and pass it down without ever worrying
about reallocating.
This changes the calling convention of pretty_print_commit() to
lift this limit. Instead of the buffer and remaining length, it
now takes a pointer to the pointer that points at the allocated
buffer, and another pointer to the location that stores the
allocated length, and reallocates the buffer as necessary.
To support the user format, the error return of interpolate()
needed to be changed. It used to return a bool telling "Ok the
result fits", or "Sorry, I had to truncate it". Now it returns
0 on success, and returns the size of the buffer it wants in
order to fit the whole result.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was moved to the setup_revisions parsing in 7cbcf4d5, so it was
never being triggered.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this option, git-format-patch will generate simple
numbered files as output instead of the default using
with the first commit line appended.
This simplifies the ability to generate an MH-style
drafts folder with each message to be sent.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds "--decorate" as a log option, which prints out the ref names
of any commits that are shown.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
An earlier --subject-prefix patch forgot that format-patch is
not the only codepath that adds the "[PATCH]" prefix, and broke
everybody else in the log family.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This implements the patch-id computation and recording library,
patch-ids.c, and rewrites the get_patch_ids() function used in
cherry and format-patch to use it, so that they do not pollute
the object namespace. Earlier code threw non-objects into the
in-core object database, and hoped for not getting bitten by
SHA-1 collisions. While it may be practically Ok, it still was
an ugly hack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a new option to git-format-patch, entitled --subject-prefix that allows
control of the subject prefix '[PATCH]'. Using this option, the text 'PATCH' is
replaced with whatever input is provided to the option. This allows easily
generating patches like '[PATCH 2.6.21-rc3]' or properly numbered series like
'[-mm3 PATCH N/M]'. This patch provides the implementation and documentation.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The existing --attach option did not create a true "attachment"
but multipart/mixed with Content-Disposition: inline. It should
have been with Content-Disposition: attachment.
Introduce --inline to add multipart/mixed that is inlined, and
make --attach to create an attachement.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We currently have two parallel notation for dealing with object types
in the code: a string and a numerical value. One of them is obviously
redundent, and the most used one requires more stack space and a bunch
of strcmp() all over the place.
This is an initial step for the removal of the version using a char array
found in object reading code paths. The patch is unfortunately large but
there is no sane way to split it in smaller parts without breaking the
system.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Badly formatted commits may have very long comments. This causes
git-format-patch to fail. To avoid that, truncate the filename
to a value we believe will always work.
Err out if the patch file cannot be created.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
It makes "git reflog [show]" act as
git log -g --pretty=oneline --abbrev-cmit
and is fairly straightforward. So you can just write
git reflog
or
git reflog show
and it will show you the reflog in a nice format.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Back when only handful commands that created commit and tag were
the only users of committer identity information, it made sense
to explicitly call setup_ident() to pre-fill the default value
from the gecos information. But it is much simpler for programs
to make the call automatic when get_ident() is called these days,
since many more programs want to use the information when updating
the reflog.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The code that uses committer_info() in reflog can barf and die
whenever it is asked to update a ref. And I do not think
calling ignore_missing_committer_name() upfront like recent
receive-pack did in the aplication is a reasonable workaround.
What the patch does.
- git_committer_info() takes one parameter. It used to be "if
this is true, then die() if the name is not available due to
bad GECOS, otherwise issue a warning once but leave the name
empty". The reason was because we wanted to prevent bad
commits from being made by git-commit-tree (and its
callers). The value 0 is only used by "git var -l".
Now it takes -1, 0 or 1. When set to -1, it does not
complain but uses the pw->pw_name when name is not
available. Existing 0 and 1 values mean the same thing as
they used to mean before. 0 means issue warnings and leave
it empty, 1 means barf and die.
- ignore_missing_committer_name() and its existing caller
(receive-pack, to set the reflog) have been removed.
- git-format-patch, to come up with the phoney message ID when
asked to thread, now passes -1 to git_committer_info(). This
codepath uses only the e-mail part, ignoring the name. It
used to barf and die. The other call in the same program
when asked to add signed-off-by line based on committer
identity still passes 1 to make sure it barfs instead of
adding a bogus s-o-b line.
- log_ref_write in refs.c, to come up with the name to record
who initiated the ref update in the reflog, passes -1. It
used to barf and die.
The last change means that git-update-ref, git-branch, and
commit walker backends can now be used in a repository with
reflog by somebody who does not have the user identity required
to make a commit. They all used to barf and die.
I've run tests and all of them seem to pass, and also tried "git
clone" as a user whose GECOS is empty -- git clone works again
now (it was broken when reflog was enabled by default).
But this definitely needs extra sets of eyeballs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We set the output directory to the git subdirectory prefix if one has
not already been specified. However, in the case of --stdout, we
explicitly _don't_ want the output directory to be set. The result was
that "git-format-patch --stdout" in a directory besides the project root
produced the "standard output, or directory, which one?" error message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since you can reset --hard to any revision you already had, when
traversing the reflog ancestry, we may not free() the commit buffer.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Editors often give easier handling of patch files if the
filename ends with .patch, so use it instead of .txt.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It does not make much sense to generate a patch that cannot be
applied. If --text is specified on the command line it still
takes precedence.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds --summary output in addition to the --stat to the
output from git-format-patch by default.
I think additions, removals and filemode changes are rare but
notable events and always showing it makes sense.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This teaches "git-format-patch" to honor the --max-count
parameter revision traversal machinery takes, so that you can
say "git-format-patch -3" to process the three topmost commits
from the current HEAD (or "git-format-patch -2 topic" to name a
specific branch).
Signed-off-by: Junio C Hamano <junkio@cox.net>
The default can also be changed with "format.suffix" configuration.
Leaving it empty would not add any suffix.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It is plausible for somebody to want to view the commit log in a
different encoding from i18n.commitencoding -- the project's
policy may be UTF-8 and the user may be using a commit message
hook to run iconv to conform to that policy (and either not have
i18n.commitencoding to default to UTF-8 or have it explicitly
set to UTF-8). Even then, Latin-1 may be more convenient for
the usual pager and the terminal the user uses.
The new variable i18n.logoutputencoding is used in preference to
i18n.commitencoding to decide what encoding to recode the log
output in when git-log and friends formats the commit log message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Updated commit objects record the encoding used in their
encoding header. This updates the log family to reencode it
into the encoding specified in i18n.commitencoding (or the
default, which is "utf-8") upon output.
To force a specific encoding that is different, log family takes
command line flag --encoding=<encoding>; giving --encoding=none
entirely disables the reencoding and lets you view log messges
in their original encoding.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a mechanical clean-up of the way *.c files include
system header files.
(1) sources under compat/, platform sha-1 implementations, and
xdelta code are exempt from the following rules;
(2) the first #include must be "git-compat-util.h" or one of
our own header file that includes it first (e.g. config.h,
builtin.h, pkt-line.h);
(3) system headers that are included in "git-compat-util.h"
need not be included in individual C source files.
(4) "git-compat-util.h" does not have to include subsystem
specific header files (e.g. expat.h).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since git-show is pure Porcelain, it is the ideal candidate to
pretty print other things than commits, too.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
While adding colour to the branch command it was pointed out that a
config option like "branch.color" conflicts with the pre-existing
"branch.something" namespace used for specifying default merge urls and
branches. The suggested solution was to flip the order of the
components to "color.branch", which I did for colourising branch.
This patch does the same thing for
- git-log (color.diff)
- git-status (color.status)
- git-diff (color.diff)
- pager (color.pager)
I haven't removed the old config options; but they should probably be
deprecated and eventually removed to prevent future namespace
collisions. I've done this deprecation by changing the documentation
for the config file to match the new names; and adding the "color.XXX"
options to contrib/completion/git-completion.bash.
Unfortunately git-svn reads "diff.color" and "pager.color"; which I
don't like to change unilaterally.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows one to see a root commit as a diff in commands like git-log,
git-show and git-whatchanged.
Signed-off-by: Peter Baumann <Peter.B.Baumannn@stud.informatik.uni-erlangen.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch on top of 'next' makes built-in git-cherry handle root
commits.
It moves the static function log-tree.c::diff_root_tree() to
tree-diff.c and makes it more similar to diff_tree_sha1() by
shuffling around arguments and factoring out the call to
log_tree_diff_flush(). Consequently the name is changed to
diff_root_tree_sha1(). It is a version of diff_tree_sha1() that
compares the empty tree (= root tree) against a single 'real' tree.
This function is then used in get_patch_id() to compute patch IDs
for initial commits instead of SEGFAULTing, as the current code
does if confronted with parentless commits.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This replaces the shell script git-cherry with a version written in C.
The behaviour of the new version differs from the original in two
points: it has no long help any more, and it is handling the (optional)
third parameter a bit differently. Basically, it does the equivalent
of
ours=`git-rev-list $ours ^$limit ^$upstream`
instead of
ours=`git-rev-list $ours ^$limit`
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This was introduced by me in commit v1.4.2.1-gc08e524.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Change places that use realloc, without a proper error path, to instead use
xrealloc. Drop an erroneous error path in the daemon code that used errno
in the die message in favour of the simpler xrealloc.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Unlike git-commit, git-format-patch was not picking up and using the
user.email config variable for the email part of the committer info.
I was forced to use the GIT_COMMITTER_EMAIL environment variable to
override the default <user@localhost.localdomain>. The fix was to
simply move the call to setup_ident() to come before the git_config()
call.
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the built-in "always-use-pager" logic for log family
to the command dispatch table of git wrapper. This makes it
easier to change the default use of pager, and has an added
benefit that we fork and exec the pager early before packs are
mmapped.
Pointed out by Juergen Ruehle <j.ruehle@bmiag.de>.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the calling convention of built-in commands and
passes the "prefix" (i.e. pathname of $PWD relative to the
project root level) down to them.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Any git command that expects to work in a subdirectory of a project, and
that reads the git config files (which is just about all of them) needs to
make sure that it does the "setup_git_directory()" call before it tries to
read the config file.
This means, among other things, that we need to move the call out of
"init_revisions()", and into the caller.
This does the mostly trivial conversion to do that.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There currently is an unfortunate circular dependency between
what init_revisions (the command line revision specification
parser) does and setting up the log and diff options. The
function uses setup_git_directory() to find the root of the
project relative to the current directory and calls diff_setup()
to prepare diff generation. However, some of the things that
diff_setup() does needs to depend on the configuration variable,
which needs to be read after setup_git_directory() is called.
This patch is a low impact workaround. It first lets
init_revisions() to run and do its thing, then uses git_config()
and diff_setup() after it returns, so that configuration
variables that affects the diff operation can be used from
subdirectories.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add the --in-reply-to option to provide a Message-Id for an initial
In-Reply-To/References header, useful for including a new patch series as part
of an existing thread.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a --thread option to enable generation of In-Reply-To and References
headers, used to make the second and subsequent mails appear as replies to the
first.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add message_id and ref_message_id fields to struct rev_info, used in show_log
with CMIT_FMT_EMAIL to set Message-Id and In-Reply-To/References respectively.
Use these in git-format-patch to make the second and subsequent patch mails
replies to the first patch mail.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano