When "git bundle" aborts due to an empty commit ranges
(i.e. resulting in an empty pack), it left a file descriptor to an
lockfile open, which resulted in leftover lockfile on Windows where
you cannot remove a file with an open file descriptor. This has
been corrected.
* jk/close-duped-fd-before-unlock-for-bundle:
bundle: dup() output descriptor closer to point-of-use
The recently merged "rebase in C" has an escape hatch to use the
scripted version when necessary, but it hasn't been documented,
which has been corrected.
* ab/rebase-in-c-escape-hatch:
tests: add a special setup where rebase.useBuiltin is off
rebase doc: document rebase.useBuiltin
The way "git rebase" parses and forwards the command line options
meant for underlying "git am" has been revamped, which fixed for
options with parameters that were not passed correctly.
* js/rebase-am-options:
rebase: validate -C<n> and --whitespace=<mode> parameters early
rebase: really just passthru the `git am` options
"git ls-remote --sort=<thing>" can feed an object that is not yet
available into the comparison machinery and segfault, which has
been corrected to check such a request upfront and reject it.
* sg/ref-filter-wo-repository:
ref-filter: don't look for objects when outside of a repository
The build procedure to link for fuzzing test has been made
customizable with a new Makefile variable.
* js/fuzz-cxxflags:
Makefile: use FUZZ_CXXFLAGS for linking fuzzers
A sanity check for start-up sequence has been added in the config
API codepath.
* js/config-sequence:
config: report a bug if git_dir exists without commondir
Bugfix for the recently graduated "git rebase --rebase-merges".
* js/rebase-r-and-merge-head:
status: rebase and merge can be in progress at the same time
built-in rebase --skip/--abort: clean up stale .git/<name> files
rebase -i: include MERGE_HEAD into files to clean up
rebase -r: do not write MERGE_HEAD unless needed
rebase -r: demonstrate bug with conflicting merges
When editing a patch in a "git add -i" session, a hunk could be
made to no-op. The "git apply" program used to reject a patch with
such a no-op hunk to catch user mistakes, but it is now updated to
explicitly allow a no-op hunk in an edited patch.
* js/apply-recount-allow-noop:
apply --recount: allow "no-op hunks"
"rev-parse --exclude=<pattern> --branches=<pattern>" etc. did not
quite work, which has been corrected.
* ra/rev-parse-exclude-glob:
refs: fix some exclude patterns being ignored
refs: show --exclude failure with --branches/tags/remotes=glob
Code clean-up with correction to make the reimplemented "git
rebase" a more faithful rewrite of the original, which also regains
performance.
* js/builtin-rebase-perf-fix:
built-in rebase: reinstate `checkout -q` behavior where appropriate
rebase: prepare reset_head() for more flags
rebase: consolidate clean-up code before leaving reset_head()
"git rebase --autostash" did not correctly re-attach the HEAD at times.
* js/rebase-autostash-detach-fix:
built-in rebase --autostash: leave the current branch alone if possible
built-in rebase: demonstrate regression with --autostash
The "--no-patch" option, which can be used to get a high-level
overview without the actual line-by-line patch difference shown, of
the "range-diff" command was earlier broken, which has been
corrected.
* ab/range-diff-no-patch:
range-diff: make diff option behavior (e.g. --stat) consistent
range-diff: fix regression in passing along diff options
range-diff doc: add a section about output stability
"git merge" and "git pull" that merges into an unborn branch used
to completely ignore "--verify-signatures", which has been
corrected.
* jk/verify-sig-merge-into-void:
pull: handle --verify-signatures for unborn branch
merge: handle --verify-signatures for unborn branch
merge: extract verify_merge_signature() helper
Various functions have been audited for "-Wunused-parameter" warnings
and bugs in them got fixed.
* jk/unused-parameter-fixes:
midx: double-check large object write loop
assert NOARG/NONEG behavior of parse-options callbacks
parse-options: drop OPT_DATE()
apply: return -1 from option callback instead of calling exit(1)
cat-file: report an error on multiple --batch options
tag: mark "--message" option with NONEG
show-branch: mark --reflog option as NONEG
format-patch: mark "--no-numbered" option with NONEG
status: mark --find-renames option with NONEG
cat-file: mark batch options with NONEG
pack-objects: mark index-version option as NONEG
ls-files: mark exclude options as NONEG
am: handle --no-patch-format option
apply: mark include/exclude options as NONEG
The way -lcurl library gets linked has been simplified by taking
advantage of the fact that we can just ask curl-config command how.
* jk/curl-ldflags:
build: link with curl-defined linker flags
Add a few tests for a topic already in 'master'.
* mg/gpg-fingerprint-test:
t/t7510-signed-commit.sh: add signing subkey to Eris Discordia key
t/t7510-signed-commit.sh: Add %GP to custom format checks
The codebase has been cleaned up to reduce "#ifndef NO_PTHREADS".
* nd/pthreads:
Clean up pthread_create() error handling
read-cache.c: initialize copy_len to shut up gcc 8
read-cache.c: reduce branching based on HAVE_THREADS
read-cache.c: remove #ifdef NO_PTHREADS
pack-objects: remove #ifdef NO_PTHREADS
preload-index.c: remove #ifdef NO_PTHREADS
grep: clean up num_threads handling
grep: remove #ifdef NO_PTHREADS
attr.c: remove #ifdef NO_PTHREADS
name-hash.c: remove #ifdef NO_PTHREADS
index-pack: remove #ifdef NO_PTHREADS
send-pack.c: move async's #ifdef NO_PTHREADS back to run-command.c
run-command.h: include thread-utils.h instead of pthread.h
thread-utils: macros to unconditionally compile pthreads API
The revision walker machinery learned to take advantage of the
commit generation numbers stored in the commit-graph file.
* ds/reachable-topo-order:
t6012: make rev-list tests more interesting
revision.c: generation-based topo-order algorithm
commit/revisions: bookkeeping before refactoring
revision.c: begin refactoring --topo-order logic
test-reach: add rev-list tests
test-reach: add run_three_modes method
prio-queue: add 'peek' operation
Knowing the original names (hashes) of commits can sometimes enable
post-filtering that would otherwise be difficult or impossible. In
particular, the desire to rewrite commit messages which refer to other
prior commits (on top of whatever other filtering is being done) is
very difficult without knowing the original names of each commit.
In addition, knowing the original names (hashes) of blobs can allow
filtering by blob-id without requiring re-hashing the content of the
blob, and is thus useful as a small optimization.
Once we add original ids for both commits and blobs, we may as well
add them for tags too for completeness. Perhaps someone will have a
use for them.
This commit teaches a new --show-original-ids option to fast-export
which will make it add a 'original-oid <hash>' line to blob, commits,
and tags. It also teaches fast-import to parse (and ignore) such
lines.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import.c has started with a comment for nine and a half years
re-directing the reader to Documentation/git-fast-import.txt for
maintained documentation. Instead of leaving the unmaintained
documentation in place, just excise it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git filter-branch has a nifty feature allowing you to rewrite, e.g. just
the last 8 commits of a linear history
git filter-branch $OPTIONS HEAD~8..HEAD
If you try the same with git fast-export, you instead get a history of
only 8 commits, with HEAD~7 being rewritten into a root commit. There
are two alternatives:
1) Don't use the negative revision specification, and when you're
filtering the output to make modifications to the last 8 commits,
just be careful to not modify any earlier commits somehow.
2) First run 'git fast-export --export-marks=somefile HEAD~8', then
run 'git fast-export --import-marks=somefile HEAD~8..HEAD'.
Both are more error prone than I'd like (the first for obvious reasons;
with the second option I have sometimes accidentally included too many
revisions in the first command and then found that the corresponding
extra revisions were not exported by the second command and thus were
not modified as I expected). Also, both are poor from a performance
perspective.
Add a new --reference-excluded-parents option which will cause
fast-export to refer to commits outside the specified rev-list-args
range by their sha1sum. Such a stream will only be useful in a
repository which already contains the necessary commits (much like the
restriction imposed when using --no-data).
Note from Peff:
I think we might be able to do a little more optimization here. If
we're exporting HEAD^..HEAD and there's an object in HEAD^ which is
unchanged in HEAD, I think we'd still print it (because it would not
be marked SHOWN), but we could omit it (by walking the tree of the
boundary commits and marking them shown). I don't think it's a
blocker for what you're doing here, but just a possible future
optimization.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If file paths are specified to fast-export and a ref points to a commit
that does not touch any of the relevant paths, then that ref would
sometimes fail to be exported. (This depends on whether any ancestors
of the commit which do touch the relevant paths would be exported with
that same ref name or a different ref name.) To avoid this problem,
put *all* specified refs into extra_refs to start, and then as we export
each commit, remove the refname used in the 'commit $REFNAME' directive
from extra_refs. Then, in handle_tags_and_duplicates() we know which
refs actually do need a manual reset directive in order to be included.
This means that we do need some special handling for excluded refs; e.g.
if someone runs
git fast-export ^master master
then they've asked for master to be exported, but they have also asked
for the commit which master points to and all of its history to be
excluded. That logically means ref deletion. Previously, such refs
were just silently omitted from being exported despite having been
explicitly requested for export.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If file paths are specified to fast-export and multiple refs point to a
commit that does not touch any of the relevant file paths, then
fast-export can hit problems. fast-export has a list of additional refs
that it needs to explicitly set after exporting all blobs and commits,
and when it tries to get_object_mark() on the relevant commit, it can
get a mark of 0, i.e. "not found", because the commit in question did
not touch the relevant paths and thus was not exported. Trying to
import a stream with a mark corresponding to an unexported object will
cause fast-import to crash.
Avoid this problem by taking the commit the ref points to and finding an
ancestor of it that was exported, and make the ref point to that commit
instead.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Logic to replace a filtered commit with an unfiltered ancestor is useful
elsewhere; put it into a function we can call.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --tag-of-filtered-object=rewrite is specified along with a set of
paths to limit what is exported, then any tags pointing to old commits
that do not contain any of those specified paths cause problems. Since
the old tagged commit is not exported, fast-export attempts to rewrite
such tags to an ancestor commit which was exported. If no such commit
exists, then fast-export currently die()s. Five years after the tag
rewriting logic was added to fast-export (see commit 2d8ad46919,
"fast-export: Add a --tag-of-filtered-object option for newly dangling
tags", 2009-06-25), fast-import gained the ability to delete refs (see
commit 4ee1b225b9, "fast-import: add support to delete refs",
2014-04-20), so now we do have a valid option to rewrite the tag to.
Delete these tags instead of dying.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ABORT and ERROR happen to have the same value, but come from differnt
enums. Use the one from the correct enum, and while at it, rename the
values to avoid such problems.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename anonymize_sha1() to anonymize_oid(() and change its signature,
and switch from sha1_to_hex() to oid_to_hex() and from GIT_SHA1_RAWSZ to
the_hash_algo->rawsz. Also change a comment and a die string to mention
oid instead of sha1.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a bundle to a file, the bundle code actually creates
"your.bundle.lock" using our lockfile interface. We feed that output
descriptor to a child git-pack-objects via run-command, which has the
quirk that it closes the output descriptor in the parent.
To avoid confusing the lockfile code (which still thinks the descriptor
is valid), we dup() it, and operate on the duplicate.
However, this has a confusing side effect: after the dup() but before we
call pack-objects, we have _two_ descriptors open to the lockfile. If we
call die() during that time, the lockfile code will try to clean up the
partially-written file. It knows to close() the file before unlinking,
since on some platforms (i.e., Windows) the open file would block the
deletion. But it doesn't know about the duplicate descriptor. On
Windows, triggering an error at the right part of the code will result
in the cleanup failing and the lockfile being left in the filesystem.
We can solve this by moving the dup() much closer to start_command(),
shrinking the window in which we have the second descriptor open. It's
easy to place this in such a way that no die() is possible. We could
still die due to a signal in the exact wrong moment, but we already
tolerate races there (e.g., a signal could come before we manage to put
the file on the cleanup list in the first place).
As a bonus, this shields create_bundle() itself from the duplicate-fd
trick, and we can simplify its error handling (note that the lock
rollback now happens unconditionally, but that's OK; it's a noop if we
didn't open the lock in the first place).
The included test uses an empty bundle to cause a failure at the right
spot in the code, because that's easy to trigger (the other likely
errors are write() problems like ENOSPC). Note that it would already
pass on non-Windows systems (because they are happy to unlink an
already-open file).
Based-on-a-patch-by: Gaël Lhez <gael.lhez@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a GIT_TEST_REBASE_USE_BUILTIN=false test mode which is equivalent
to running with rebase.useBuiltin=false. This is needed to spot that
we're not introducing any regressions in the legacy rebase version
while we're carrying both it and the new builtin version.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rebase.useBuiltin variable introduced in 55071ea248 ("rebase:
start implementing it as a builtin", 2018-08-07) was turned on by
default in 5541bd5b8f ("rebase: default to using the builtin rebase",
2018-08-08), but had no documentation.
Let's document it so that users who run into any stability issues with
the C rewrite know there's an escape hatch[1], and make it clear that
needing to turn off builtin rebase means you've found a bug in git.
1. https://public-inbox.org/git/87y39w1wc2.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The MSDN documentation has been superseded by Microsoft Docs (which is
backed by a repository on GitHub containing many, many files in Markdown
format).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OSS-Fuzz requires C++-specific flags to link fuzzers. Passing these in
CFLAGS causes lots of build warnings. Using separate FUZZ_CXXFLAGS
avoids this.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, when we refer to `/an/absolute/path/to/git`, it magically
resolves `git.exe` at that location. Except if something of the name
`git` exists next to that `git.exe`. So if we call `$BUILD_DIR/git`, it
will find `$BUILD_DIR/git.exe` *only* if there is not, say, a directory
called `$BUILD_DIR/git`.
Such a directory, however, exists in Git for Windows when building with
Visual Studio (our Visual Studio project generator defaults to putting
the build files into a directory whose name is the base name of the
corresponding `.exe`).
In the bin-wrappers/* scripts, we already take pains to use `git.exe`
rather than `git`, as this could pick up the wrong thing on Windows
(i.e. if there exists a `git` file or directory in the build directory).
Now we do the same in the tests' start-up code.
This also helps when testing an installed Git, as there might be even
more likely some stray file or directory in the way.
Note: the only way we can record whether the `.exe` suffix is by writing
it to the `GIT-BUILD-OPTIONS` file and sourcing it at the beginning of
`t/test-lib.sh`. This is not a requirement introduced by this patch, but
we move the call to be able to use the `$X` variable that holds the file
extension, if any.
Note also: the many, many calls to `git this` and `git that` are
unaffected, as the regular PATH search will find the `.exe` files on
Windows (and not be confused by a directory of the name `git` that is
in one of the directories listed in the `PATH` variable), while
`/path/to/git` would not, per se, know that it is looking for an
executable and happily prefer such a directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We really only need the test helpers to be built in the worktree in that
case, but that is not what we test for.
On the other hand it is a perfect opportunity to verify that
`GIT_TEST_INSTALLED` points to a working Git.
So let's test the appropriate Git executable. While at it, also adjust
the error message in the `GIT_TEST_INSTALLED` case.
This patch is best viewed with `-w --patience`.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All config extensions are described in technical/repository-version.txt.
I made a mistake of adding it in config.txt instead. This patch moves
it back to where it belongs.
Since repository-version.txt is not part of officially generated
documents (it's not even part of DOC_HTML target), it's only visible
to developers who read plain .txt files. Let's include it in
gitrepository-layout.5 for more visibility. Some minor asciidoc fixes
are required in repository-version.txt to make this happen.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command 'git ls-remote --sort=authordate <remote>' segfaults when
run outside of a repository, ever since the introduction of its
'--sort' option in 1fb20dfd8e (ls-remote: create '--sort' option,
2018-04-09).
While in general the 'git ls-remote' command can be run outside of a
repository just fine, its '--sort=<key>' option with certain keys does
require access to the referenced objects. This sorting is implemented
using the generic ref-filter sorting facility, which already handles
missing objects gracefully with the appropriate 'missing object
deadbeef for HEAD' message. However, being generic means that it
checks replace refs while trying to retrieve an object, and while
doing so it accesses the 'git_replace_ref_base' variable, which has
not been initialized and is still a NULL pointer when outside of a
repository, thus causing the segfault.
Make ref-filter more careful upfront while parsing the format string,
and make it error out when encountering a format atom requiring object
access when we are not in a repository. Also add a test to ensure
that 'git ls-remote --sort' fails gracefully when executed outside of
a repository.
Reported-by: H.Merijn Brand <h.m.brand@xs4all.nl>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to limitations in the current implementation, some configuration
variables specified via 'git clone -c var=val' (or 'git -c var=val
clone') are ignored during the initial fetch and checkout.
Let the users know which configuration variables are known to be
ignored ('remote.origin.mirror' and 'remote.origin.tagOpt') under the
documentation of 'git clone -c', along with hints to use the options
'--mirror' and '--no-tags' instead.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin