Tree:
ec136663c7
main
maint
master
next
seen
todo
gitgui-0.10.0
gitgui-0.10.1
gitgui-0.10.2
gitgui-0.11.0
gitgui-0.12.0
gitgui-0.13.0
gitgui-0.14.0
gitgui-0.15.0
gitgui-0.16.0
gitgui-0.17.0
gitgui-0.18.0
gitgui-0.19.0
gitgui-0.20.0
gitgui-0.21.0
gitgui-0.6.0
gitgui-0.6.1
gitgui-0.6.2
gitgui-0.6.3
gitgui-0.6.4
gitgui-0.6.5
gitgui-0.7.0
gitgui-0.7.0-rc1
gitgui-0.7.1
gitgui-0.7.2
gitgui-0.7.3
gitgui-0.7.4
gitgui-0.7.5
gitgui-0.8.0
gitgui-0.8.1
gitgui-0.8.2
gitgui-0.8.3
gitgui-0.8.4
gitgui-0.9.0
gitgui-0.9.1
gitgui-0.9.2
gitgui-0.9.3
junio-gpg-pub
v0.99
v0.99.1
v0.99.2
v0.99.3
v0.99.4
v0.99.5
v0.99.6
v0.99.7
v0.99.7a
v0.99.7b
v0.99.7c
v0.99.7d
v0.99.8
v0.99.8a
v0.99.8b
v0.99.8c
v0.99.8d
v0.99.8e
v0.99.8f
v0.99.8g
v0.99.9
v0.99.9a
v0.99.9b
v0.99.9c
v0.99.9d
v0.99.9e
v0.99.9f
v0.99.9g
v0.99.9h
v0.99.9i
v0.99.9j
v0.99.9k
v0.99.9l
v0.99.9m
v0.99.9n
v1.0.0
v1.0.0a
v1.0.0b
v1.0.1
v1.0.10
v1.0.11
v1.0.12
v1.0.13
v1.0.2
v1.0.3
v1.0.4
v1.0.5
v1.0.6
v1.0.7
v1.0.8
v1.0.9
v1.0rc1
v1.0rc2
v1.0rc3
v1.0rc4
v1.0rc5
v1.0rc6
v1.1.0
v1.1.1
v1.1.2
v1.1.3
v1.1.4
v1.1.5
v1.1.6
v1.2.0
v1.2.1
v1.2.2
v1.2.3
v1.2.4
v1.2.5
v1.2.6
v1.3.0
v1.3.0-rc1
v1.3.0-rc2
v1.3.0-rc3
v1.3.0-rc4
v1.3.1
v1.3.2
v1.3.3
v1.4.0
v1.4.0-rc1
v1.4.0-rc2
v1.4.1
v1.4.1-rc1
v1.4.1-rc2
v1.4.1.1
v1.4.2
v1.4.2-rc1
v1.4.2-rc2
v1.4.2-rc3
v1.4.2-rc4
v1.4.2.1
v1.4.2.2
v1.4.2.3
v1.4.2.4
v1.4.3
v1.4.3-rc1
v1.4.3-rc2
v1.4.3-rc3
v1.4.3.1
v1.4.3.2
v1.4.3.3
v1.4.3.4
v1.4.3.5
v1.4.4
v1.4.4-rc1
v1.4.4-rc2
v1.4.4.1
v1.4.4.2
v1.4.4.3
v1.4.4.4
v1.4.4.5
v1.5.0
v1.5.0-rc0
v1.5.0-rc1
v1.5.0-rc2
v1.5.0-rc3
v1.5.0-rc4
v1.5.0.1
v1.5.0.2
v1.5.0.3
v1.5.0.4
v1.5.0.5
v1.5.0.6
v1.5.0.7
v1.5.1
v1.5.1-rc1
v1.5.1-rc2
v1.5.1-rc3
v1.5.1.1
v1.5.1.2
v1.5.1.3
v1.5.1.4
v1.5.1.5
v1.5.1.6
v1.5.2
v1.5.2-rc0
v1.5.2-rc1
v1.5.2-rc2
v1.5.2-rc3
v1.5.2.1
v1.5.2.2
v1.5.2.3
v1.5.2.4
v1.5.2.5
v1.5.3
v1.5.3-rc0
v1.5.3-rc1
v1.5.3-rc2
v1.5.3-rc3
v1.5.3-rc4
v1.5.3-rc5
v1.5.3-rc6
v1.5.3-rc7
v1.5.3.1
v1.5.3.2
v1.5.3.3
v1.5.3.4
v1.5.3.5
v1.5.3.6
v1.5.3.7
v1.5.3.8
v1.5.4
v1.5.4-rc0
v1.5.4-rc1
v1.5.4-rc2
v1.5.4-rc3
v1.5.4-rc4
v1.5.4-rc5
v1.5.4.1
v1.5.4.2
v1.5.4.3
v1.5.4.4
v1.5.4.5
v1.5.4.6
v1.5.4.7
v1.5.5
v1.5.5-rc0
v1.5.5-rc1
v1.5.5-rc2
v1.5.5-rc3
v1.5.5.1
v1.5.5.2
v1.5.5.3
v1.5.5.4
v1.5.5.5
v1.5.5.6
v1.5.6
v1.5.6-rc0
v1.5.6-rc1
v1.5.6-rc2
v1.5.6-rc3
v1.5.6.1
v1.5.6.2
v1.5.6.3
v1.5.6.4
v1.5.6.5
v1.5.6.6
v1.6.0
v1.6.0-rc0
v1.6.0-rc1
v1.6.0-rc2
v1.6.0-rc3
v1.6.0.1
v1.6.0.2
v1.6.0.3
v1.6.0.4
v1.6.0.5
v1.6.0.6
v1.6.1
v1.6.1-rc1
v1.6.1-rc2
v1.6.1-rc3
v1.6.1-rc4
v1.6.1.1
v1.6.1.2
v1.6.1.3
v1.6.1.4
v1.6.2
v1.6.2-rc0
v1.6.2-rc1
v1.6.2-rc2
v1.6.2.1
v1.6.2.2
v1.6.2.3
v1.6.2.4
v1.6.2.5
v1.6.3
v1.6.3-rc0
v1.6.3-rc1
v1.6.3-rc2
v1.6.3-rc3
v1.6.3-rc4
v1.6.3.1
v1.6.3.2
v1.6.3.3
v1.6.3.4
v1.6.4
v1.6.4-rc0
v1.6.4-rc1
v1.6.4-rc2
v1.6.4-rc3
v1.6.4.1
v1.6.4.2
v1.6.4.3
v1.6.4.4
v1.6.4.5
v1.6.5
v1.6.5-rc0
v1.6.5-rc1
v1.6.5-rc2
v1.6.5-rc3
v1.6.5.1
v1.6.5.2
v1.6.5.3
v1.6.5.4
v1.6.5.5
v1.6.5.6
v1.6.5.7
v1.6.5.8
v1.6.5.9
v1.6.6
v1.6.6-rc0
v1.6.6-rc1
v1.6.6-rc2
v1.6.6-rc3
v1.6.6-rc4
v1.6.6.1
v1.6.6.2
v1.6.6.3
v1.7.0
v1.7.0-rc0
v1.7.0-rc1
v1.7.0-rc2
v1.7.0.1
v1.7.0.2
v1.7.0.3
v1.7.0.4
v1.7.0.5
v1.7.0.6
v1.7.0.7
v1.7.0.8
v1.7.0.9
v1.7.1
v1.7.1-rc0
v1.7.1-rc1
v1.7.1-rc2
v1.7.1.1
v1.7.1.2
v1.7.1.3
v1.7.1.4
v1.7.10
v1.7.10-rc0
v1.7.10-rc1
v1.7.10-rc2
v1.7.10-rc3
v1.7.10-rc4
v1.7.10.1
v1.7.10.2
v1.7.10.3
v1.7.10.4
v1.7.10.5
v1.7.11
v1.7.11-rc0
v1.7.11-rc1
v1.7.11-rc2
v1.7.11-rc3
v1.7.11.1
v1.7.11.2
v1.7.11.3
v1.7.11.4
v1.7.11.5
v1.7.11.6
v1.7.11.7
v1.7.12
v1.7.12-rc0
v1.7.12-rc1
v1.7.12-rc2
v1.7.12-rc3
v1.7.12.1
v1.7.12.2
v1.7.12.3
v1.7.12.4
v1.7.2
v1.7.2-rc0
v1.7.2-rc1
v1.7.2-rc2
v1.7.2-rc3
v1.7.2.1
v1.7.2.2
v1.7.2.3
v1.7.2.4
v1.7.2.5
v1.7.3
v1.7.3-rc0
v1.7.3-rc1
v1.7.3-rc2
v1.7.3.1
v1.7.3.2
v1.7.3.3
v1.7.3.4
v1.7.3.5
v1.7.4
v1.7.4-rc0
v1.7.4-rc1
v1.7.4-rc2
v1.7.4-rc3
v1.7.4.1
v1.7.4.2
v1.7.4.3
v1.7.4.4
v1.7.4.5
v1.7.5
v1.7.5-rc0
v1.7.5-rc1
v1.7.5-rc2
v1.7.5-rc3
v1.7.5.1
v1.7.5.2
v1.7.5.3
v1.7.5.4
v1.7.6
v1.7.6-rc0
v1.7.6-rc1
v1.7.6-rc2
v1.7.6-rc3
v1.7.6.1
v1.7.6.2
v1.7.6.3
v1.7.6.4
v1.7.6.5
v1.7.6.6
v1.7.7
v1.7.7-rc0
v1.7.7-rc1
v1.7.7-rc2
v1.7.7-rc3
v1.7.7.1
v1.7.7.2
v1.7.7.3
v1.7.7.4
v1.7.7.5
v1.7.7.6
v1.7.7.7
v1.7.8
v1.7.8-rc0
v1.7.8-rc1
v1.7.8-rc2
v1.7.8-rc3
v1.7.8-rc4
v1.7.8.1
v1.7.8.2
v1.7.8.3
v1.7.8.4
v1.7.8.5
v1.7.8.6
v1.7.9
v1.7.9-rc0
v1.7.9-rc1
v1.7.9-rc2
v1.7.9.1
v1.7.9.2
v1.7.9.3
v1.7.9.4
v1.7.9.5
v1.7.9.6
v1.7.9.7
v1.8.0
v1.8.0-rc0
v1.8.0-rc1
v1.8.0-rc2
v1.8.0-rc3
v1.8.0.1
v1.8.0.2
v1.8.0.3
v1.8.1
v1.8.1-rc0
v1.8.1-rc1
v1.8.1-rc2
v1.8.1-rc3
v1.8.1.1
v1.8.1.2
v1.8.1.3
v1.8.1.4
v1.8.1.5
v1.8.1.6
v1.8.2
v1.8.2-rc0
v1.8.2-rc1
v1.8.2-rc2
v1.8.2-rc3
v1.8.2.1
v1.8.2.2
v1.8.2.3
v1.8.3
v1.8.3-rc0
v1.8.3-rc1
v1.8.3-rc2
v1.8.3-rc3
v1.8.3.1
v1.8.3.2
v1.8.3.3
v1.8.3.4
v1.8.4
v1.8.4-rc0
v1.8.4-rc1
v1.8.4-rc2
v1.8.4-rc3
v1.8.4-rc4
v1.8.4.1
v1.8.4.2
v1.8.4.3
v1.8.4.4
v1.8.4.5
v1.8.5
v1.8.5-rc0
v1.8.5-rc1
v1.8.5-rc2
v1.8.5-rc3
v1.8.5.1
v1.8.5.2
v1.8.5.3
v1.8.5.4
v1.8.5.5
v1.8.5.6
v1.9-rc0
v1.9-rc1
v1.9-rc2
v1.9.0
v1.9.0-rc3
v1.9.1
v1.9.2
v1.9.3
v1.9.4
v1.9.5
v2.0.0
v2.0.0-rc0
v2.0.0-rc1
v2.0.0-rc2
v2.0.0-rc3
v2.0.0-rc4
v2.0.1
v2.0.2
v2.0.3
v2.0.4
v2.0.5
v2.1.0
v2.1.0-rc0
v2.1.0-rc1
v2.1.0-rc2
v2.1.1
v2.1.2
v2.1.3
v2.1.4
v2.10.0
v2.10.0-rc0
v2.10.0-rc1
v2.10.0-rc2
v2.10.1
v2.10.2
v2.10.3
v2.10.4
v2.10.5
v2.11.0
v2.11.0-rc0
v2.11.0-rc1
v2.11.0-rc2
v2.11.0-rc3
v2.11.1
v2.11.2
v2.11.3
v2.11.4
v2.12.0
v2.12.0-rc0
v2.12.0-rc1
v2.12.0-rc2
v2.12.1
v2.12.2
v2.12.3
v2.12.4
v2.12.5
v2.13.0
v2.13.0-rc0
v2.13.0-rc1
v2.13.0-rc2
v2.13.1
v2.13.2
v2.13.3
v2.13.4
v2.13.5
v2.13.6
v2.13.7
v2.14.0
v2.14.0-rc0
v2.14.0-rc1
v2.14.1
v2.14.2
v2.14.3
v2.14.4
v2.14.5
v2.14.6
v2.15.0
v2.15.0-rc0
v2.15.0-rc1
v2.15.0-rc2
v2.15.1
v2.15.2
v2.15.3
v2.15.4
v2.16.0
v2.16.0-rc0
v2.16.0-rc1
v2.16.0-rc2
v2.16.1
v2.16.2
v2.16.3
v2.16.4
v2.16.5
v2.16.6
v2.17.0
v2.17.0-rc0
v2.17.0-rc1
v2.17.0-rc2
v2.17.1
v2.17.2
v2.17.3
v2.17.4
v2.17.5
v2.17.6
v2.18.0
v2.18.0-rc0
v2.18.0-rc1
v2.18.0-rc2
v2.18.1
v2.18.2
v2.18.3
v2.18.4
v2.18.5
v2.19.0
v2.19.0-rc0
v2.19.0-rc1
v2.19.0-rc2
v2.19.1
v2.19.2
v2.19.3
v2.19.4
v2.19.5
v2.19.6
v2.2.0
v2.2.0-rc0
v2.2.0-rc1
v2.2.0-rc2
v2.2.0-rc3
v2.2.1
v2.2.2
v2.2.3
v2.20.0
v2.20.0-rc0
v2.20.0-rc1
v2.20.0-rc2
v2.20.1
v2.20.2
v2.20.3
v2.20.4
v2.20.5
v2.21.0
v2.21.0-rc0
v2.21.0-rc1
v2.21.0-rc2
v2.21.1
v2.21.2
v2.21.3
v2.21.4
v2.22.0
v2.22.0-rc0
v2.22.0-rc1
v2.22.0-rc2
v2.22.0-rc3
v2.22.1
v2.22.2
v2.22.3
v2.22.4
v2.22.5
v2.23.0
v2.23.0-rc0
v2.23.0-rc1
v2.23.0-rc2
v2.23.1
v2.23.2
v2.23.3
v2.23.4
v2.24.0
v2.24.0-rc0
v2.24.0-rc1
v2.24.0-rc2
v2.24.1
v2.24.2
v2.24.3
v2.24.4
v2.25.0
v2.25.0-rc0
v2.25.0-rc1
v2.25.0-rc2
v2.25.1
v2.25.2
v2.25.3
v2.25.4
v2.25.5
v2.26.0
v2.26.0-rc0
v2.26.0-rc1
v2.26.0-rc2
v2.26.1
v2.26.2
v2.26.3
v2.27.0
v2.27.0-rc0
v2.27.0-rc1
v2.27.0-rc2
v2.27.1
v2.28.0
v2.28.0-rc0
v2.28.0-rc1
v2.28.0-rc2
v2.28.1
v2.29.0
v2.29.0-rc0
v2.29.0-rc1
v2.29.0-rc2
v2.29.1
v2.29.2
v2.29.3
v2.3.0
v2.3.0-rc0
v2.3.0-rc1
v2.3.0-rc2
v2.3.1
v2.3.10
v2.3.2
v2.3.3
v2.3.4
v2.3.5
v2.3.6
v2.3.7
v2.3.8
v2.3.9
v2.30.0
v2.30.0-rc0
v2.30.0-rc1
v2.30.0-rc2
v2.30.1
v2.30.2
v2.30.3
v2.30.4
v2.30.5
v2.30.6
v2.30.7
v2.30.8
v2.30.9
v2.31.0
v2.31.0-rc0
v2.31.0-rc1
v2.31.0-rc2
v2.31.1
v2.31.2
v2.31.3
v2.31.4
v2.31.5
v2.31.6
v2.31.7
v2.31.8
v2.32.0
v2.32.0-rc0
v2.32.0-rc1
v2.32.0-rc2
v2.32.0-rc3
v2.32.1
v2.32.2
v2.32.3
v2.32.4
v2.32.5
v2.32.6
v2.32.7
v2.33.0
v2.33.0-rc0
v2.33.0-rc1
v2.33.0-rc2
v2.33.1
v2.33.2
v2.33.3
v2.33.4
v2.33.5
v2.33.6
v2.33.7
v2.33.8
v2.34.0
v2.34.0-rc0
v2.34.0-rc1
v2.34.0-rc2
v2.34.1
v2.34.2
v2.34.3
v2.34.4
v2.34.5
v2.34.6
v2.34.7
v2.34.8
v2.35.0
v2.35.0-rc0
v2.35.0-rc1
v2.35.0-rc2
v2.35.1
v2.35.2
v2.35.3
v2.35.4
v2.35.5
v2.35.6
v2.35.7
v2.35.8
v2.36.0
v2.36.0-rc0
v2.36.0-rc1
v2.36.0-rc2
v2.36.1
v2.36.2
v2.36.3
v2.36.4
v2.36.5
v2.36.6
v2.37.0
v2.37.0-rc0
v2.37.0-rc1
v2.37.0-rc2
v2.37.1
v2.37.2
v2.37.3
v2.37.4
v2.37.5
v2.37.6
v2.37.7
v2.38.0
v2.38.0-rc0
v2.38.0-rc1
v2.38.0-rc2
v2.38.1
v2.38.2
v2.38.3
v2.38.4
v2.38.5
v2.39.0
v2.39.0-rc0
v2.39.0-rc1
v2.39.0-rc2
v2.39.1
v2.39.2
v2.39.3
v2.4.0
v2.4.0-rc0
v2.4.0-rc1
v2.4.0-rc2
v2.4.0-rc3
v2.4.1
v2.4.10
v2.4.11
v2.4.12
v2.4.2
v2.4.3
v2.4.4
v2.4.5
v2.4.6
v2.4.7
v2.4.8
v2.4.9
v2.40.0
v2.40.0-rc0
v2.40.0-rc1
v2.40.0-rc2
v2.40.1
v2.41.0
v2.41.0-rc0
v2.41.0-rc1
v2.41.0-rc2
v2.5.0
v2.5.0-rc0
v2.5.0-rc1
v2.5.0-rc2
v2.5.0-rc3
v2.5.1
v2.5.2
v2.5.3
v2.5.4
v2.5.5
v2.5.6
v2.6.0
v2.6.0-rc0
v2.6.0-rc1
v2.6.0-rc2
v2.6.0-rc3
v2.6.1
v2.6.2
v2.6.3
v2.6.4
v2.6.5
v2.6.6
v2.6.7
v2.7.0
v2.7.0-rc0
v2.7.0-rc1
v2.7.0-rc2
v2.7.0-rc3
v2.7.1
v2.7.2
v2.7.3
v2.7.4
v2.7.5
v2.7.6
v2.8.0
v2.8.0-rc0
v2.8.0-rc1
v2.8.0-rc2
v2.8.0-rc3
v2.8.0-rc4
v2.8.1
v2.8.2
v2.8.3
v2.8.4
v2.8.5
v2.8.6
v2.9.0
v2.9.0-rc0
v2.9.0-rc1
v2.9.0-rc2
v2.9.1
v2.9.2
v2.9.3
v2.9.4
v2.9.5
${ noResults }
3 Commits (ec136663c7d5a8e2ce1664ce79f2297e2e61c86f)
Author | SHA1 | Message | Date |
---|---|---|---|
Tay Ray Chuan | cefb2a5e39 |
ls-remote: print URL when no repo is specified
After
|
15 years ago |
Tay Ray Chuan | 9c00de5a31 |
ls-remote: fall-back to default remotes when no remote specified
Instead of breaking execution when no remote (as specified in the variable dest) is specified when git-ls-remote is invoked, continue on and let remote_get() handle it. This way, we are able to use the default remotes (eg. "origin", branch.<name>.remote), as git-fetch, git-push, and other users of remote_get(), do. If no suitable remote is found, exit with a message describing the issue, instead of just the usage text, as we do previously. Add several tests to check that git-ls-remote handles the no-remote-specified situation. Also add a test that "git ls-remote <pattern>" does not work; we are unable to guess the remote in that situation, as are git-fetch and git-push. In that test, we are testing for messages coming from two separate processes, but we should be OK, because the second message is triggered by closing the fd which must happen after the first message is printed. (analysis by Jeff King.) Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com> |
15 years ago |
Linus Torvalds | 81b50f3ce4 |
Move 'builtin-*' into a 'builtin/' subdirectory
This shrinks the top-level directory a bit, and makes it much more pleasant to use auto-completion on the thing. Instead of [torvalds@nehalem git]$ em buil<tab> Display all 180 possibilities? (y or n) [torvalds@nehalem git]$ em builtin-sh builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o [torvalds@nehalem git]$ em builtin-shor<tab> builtin-shortlog.c builtin-shortlog.o [torvalds@nehalem git]$ em builtin-shortlog.c you get [torvalds@nehalem git]$ em buil<tab> [type] builtin/ builtin.h [torvalds@nehalem git]$ em builtin [auto-completes to] [torvalds@nehalem git]$ em builtin/sh<tab> [type] shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o [torvalds@nehalem git]$ em builtin/sho [auto-completes to] [torvalds@nehalem git]$ em builtin/shor<tab> [type] shortlog.c shortlog.o [torvalds@nehalem git]$ em builtin/shortlog.c which doesn't seem all that different, but not having that annoying break in "Display all 180 possibilities?" is quite a relief. NOTE! If you do this in a clean tree (no object files etc), or using an editor that has auto-completion rules that ignores '*.o' files, you won't see that annoying 'Display all 180 possibilities?' message - it will just show the choices instead. I think bash has some cut-off around 100 choices or something. So the reason I see this is that I'm using an odd editory, and thus don't have the rules to cut down on auto-completion. But you can simulate that by using 'ls' instead, or something similar. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com> |
15 years ago |
Daniel Barkalow | fb0cc87ec0 |
Allow programs to not depend on remotes having urls
For fetch and ls-remote, which use the first url of a remote, have transport_get() determine this by passing a remote and passing NULL for the url. For push, which uses every url of a remote, use each url in turn if there are any, and use NULL if there are none. This will allow the transport code to do something different if the location is not specified with a url. Also, have the message for a fetch say "foreign" if there is no url. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> |
15 years ago |
Daniel Barkalow | c1d45cf7b0 |
Require a struct remote in transport_get()
cmd_ls_remote() was calling transport_get() with a NULL remote and a non-NULL url in the case where it was run outside a git repository. This involved a bunch of ill-tested special cases. Instead, simply get the struct remote for the URL with remote_get(), which works fine outside a git repository, and can also take global options into account. This fixes a tiny and obscure bug where "git ls-remote" without a repo didn't support global url.*.insteadOf, even though "git clone" and "git ls-remote" in any repo did. Also, enforce that all callers provide a struct remote to transport_get(). Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com> |
15 years ago |
Stefan Naewe | 0a2bb55848 |
git ls-remote: make usage string match manpage
The usage string of 'git ls-remote' is pretty terse. The manpage however gives the correct 'synopsis'. Signed-off-by: Stefan Naewe <stefan.naewe@atlas-elektronik.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> |
16 years ago |
Stephan Beyer | 1b1dd23f2d |
Make usage strings dash-less
When you misuse a git command, you are shown the usage string. But this is currently shown in the dashed form. So if you just copy what you see, it will not work, when the dashed form is no longer supported. This patch makes git commands show the dash-less version. For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh generates a dash-less usage string now. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com> |
17 years ago |
SZEDER Gábor | af05d67939 |
Always set *nongit_ok in setup_git_directory_gently()
setup_git_directory_gently() only modified the value of its *nongit_ok argument if we were not in a git repository. Now it will always set it to 0 when we are inside a repository. Also remove now unnecessary initializations in the callers of this function. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com> |
17 years ago |
Shawn O. Pearce | 52dce39762 |
Fix 'git remote show' regression on empty repository in 1.5.4
Back in
|
17 years ago |
Daniel Barkalow | ba227857d2 |
Reduce the number of connects when fetching
This shares the connection between getting the remote ref list and getting objects in the first batch. (A second connection is still used to follow tags). When we do not fetch objects (i.e. either ls-remote disconnects after getting list of refs, or we decide we are already up-to-date), we clean up the connection properly; otherwise the connection is left open in need of cleaning up to avoid getting an error message from the remote end when ssh is used. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com> |
17 years ago |
Miklos Vajna | 3e34526960 |
ls-remote: add -t and -h options.
These options are listed in the manpage (aliases for --tags/--heads) but they were not handled. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com> |
17 years ago |
Junio C Hamano | 3d3c4f5d76 |
Re-fix ls-remote
An earlier attempt in
|
17 years ago |
Junio C Hamano | 2ea7fe0d2c |
ls-remote: resurrect pattern limit support
"git ls-remote $remote $name1 $name2..." used to limit the output to refs that end with one of the $name given from the command line, but recent rewrite to C forgot to implement that support. Signed-off-by: Junio C Hamano <gitster@pobox.com> |
17 years ago |
Shawn O. Pearce | 7c2c6ee7e0 |
Reteach builtin-ls-remote to understand remotes
Prior to being made a builtin git-ls-remote understood that when it was given a remote name we wanted it to resolve that to the pre-configured URL and connect to that location. That changed when it was converted to a builtin and many of my automation tools broke. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com> |
17 years ago |
Daniel Barkalow | 8951d7c1f1 |
Build in ls-remote
This actually replaces peek-remote with ls-remote, since peek-remote now handles everything. peek-remote remains an a second name for ls-remote, although its help message now gives the "ls-remote" name. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com> |
17 years ago |
Daniel Barkalow | 18f7c51cf9 |
Build-in peek-remote, using transport infrastructure.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com> |
17 years ago |
Johannes Sixt | 98158e9cfd |
Change git_connect() to return a struct child_process instead of a pid_t.
This prepares the API of git_connect() and finish_connect() to operate on a struct child_process. Currently, we just use that object as a placeholder for the pid that we used to return. A follow-up patch will change the implementation of git_connect() and finish_connect() to make full use of the object. Old code had early-return-on-error checks at the calling sites of git_connect(), but since git_connect() dies on errors anyway, these checks were removed. [sp: Corrected style nit of "conn == NULL" to "!conn"] Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Shawn O. Pearce <spearce@spearce.org> |
17 years ago |
Michael S. Tsirkin | 7841ce7985 |
connect: display connection progress
Make git notify the user about host resolution/connection attempts. This is useful both as a progress indicator on slow links, and helps reassure the user there are no firewall problems. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <junkio@cox.net> |
18 years ago |
Junio C Hamano | 599065a3bb |
prefixcmp(): fix-up mechanical conversion.
Previous step converted use of strncmp() with literal string mechanically even when the result is only used as a boolean: if (!strncmp("foo", arg, 3)) ==> if (!(-prefixcmp(arg, "foo"))) This step manually cleans them up to read: if (!prefixcmp(arg, "foo")) Signed-off-by: Junio C Hamano <junkio@cox.net> |
18 years ago |
Junio C Hamano | cc44c7655f |
Mechanical conversion to use prefixcmp()
This mechanically converts strncmp() to use prefixcmp(), but only when the parameters match specific patterns, so that they can be verified easily. Leftover from this will be fixed in a separate step, including idiotic conversions like if (!strncmp("foo", arg, 3)) => if (!(-prefixcmp(arg, "foo"))) This was done by using this script in px.perl #!/usr/bin/perl -i.bak -p if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) { s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|; } if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) { s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|; } and running: $ git grep -l strncmp -- '*.c' | xargs perl px.perl Signed-off-by: Junio C Hamano <junkio@cox.net> |
18 years ago |
Uwe Kleine-König | 27dca07fb7 |
rename --exec to --upload-pack for fetch-pack and peek-remote
Just some option name disambiguation. This is the counter part to
commit
|
18 years ago |
Franck Bui-Huu | 8a5dbef8ac |
Test return value of finish_connect()
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net> |
19 years ago |
Johannes Schindelin | 28f5c70b85 |
Remove uneeded #include
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net> |
19 years ago |
Linus Torvalds | 2718ff098a |
Improve git-peek-remote
This makes git-peek-remote able to basically do everything that git-ls-remote does (but obviously just for the native protocol, so no http[s]: or rsync: support). The default behaviour is the same, but you can now give a mixture of "--refs", "--tags" and "--heads" flags, where "--refs" forces git-peek-remote to only show real refs (ie none of the fakey tag lookups, but also not the special pseudo-refs like HEAD and MERGE_HEAD). The "--tags" and "--heads" flags respectively limit the output to just regular tags and heads, of course. You can still also ask to limit them by name too. You can combine the flags, so git peek-remote --refs --tags . will show all local _true_ tags, without the generated tag lookups (compare the output without the "--refs" flag). And "--tags --heads" will show both tags and heads, but will avoid (for example) any special refs outside of the standard locations. I'm also planning on adding a "--ignore-local" flag that allows us to ask it to ignore any refs that we already have in the local tree, but that's an independent thing. All this is obviously gearing up to making "git fetch" cheaper. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net> |
19 years ago |
Junio C Hamano | e44eb3e4c7 |
peek-remote: honor proxy config even from subdirectory.
Use setup_git_directory_gently() at the beginning of peek-remote so that git:// proxy can be picked up from the configuration file. Signed-off-by: Junio C Hamano <junkio@cox.net> |
19 years ago |
Junio C Hamano | 5a2e04d203 |
Ignore funny refname sent from remote
This allows the remote side (most notably, upload-pack) to show additional information without affecting the downloader. Peek-remote does not ignore them -- this is to make it useful for Pasky's automatic tag following. Signed-off-by: Junio C Hamano <junkio@cox.net> |
19 years ago |
Junio C Hamano | 1a7141ff28 |
Ignore funny refname sent from remote
This allows the remote side (most notably, upload-pack) to show additional information without affecting the downloader. Peek-remote does not ignore them -- this is to make it useful for Pasky's automatic tag following. Signed-off-by: Junio C Hamano <junkio@cox.net> |
19 years ago |
Junio C Hamano | 18705953af |
[PATCH] git-peek-remote: show tags and heads from a remote repository.
Add a git-peek-remote command that talks with upload-pack the same way git-fetch-pack and git-clone-pack do, to show the references the remote side has on the standard output. A later patch introduces git-ls-remote that implements a UI to store tag values retrieved using this command. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org> |
20 years ago |