kernel/git - git - PowerEL Git System

Commit Graph

Author	SHA1	Message	Date
Julian Phillips	95c96d48e6	remote: fix use-after-free error detected by glibc in ref_remove_duplicates In ref_remove_duplicates, when we encounter a duplicate and remove it from the list we need to make sure that the prev pointer stays pointing at the last entry and also skip over adding the just freed entry to the string_list. Previously fetch could crash with: * glibc detected * git: corrupted double-linked list: ... Also add a test to try and catch problems with duplicate removal in the future. Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>	15 years ago
Junio C Hamano	2e674a9d09	t5510: harden the way verify-pack is used The test ignored the exit status from verify pack command, and also relied on not seeing any delta chain statistics. Signed-off-by: Junio C Hamano <gitster@pobox.com>	15 years ago
Johannes Schindelin	7efaeba2a8	rsync transport: allow local paths, and fix tests Earlier, the rsync tests were disabled by default, as they needed a running rsyncd daemon. This was only due to the limitation that our rsync transport only allowed full URLs of the form rsync://<host>/<path> Relaxing the URLs to allow rsync:<path> permitted the change in the tests to run whenever rsync is available, without requiring a fully configured and running rsyncd. While at it, the tests were fixed so that they run in directories with a space in their name. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Johannes Schindelin	8ee5d73137	Fix fetch/pull when run without --update-head-ok Some confusing tutorials suggested that it would be a good idea to fetch into the current branch with something like this: git fetch origin master:master (or even worse: the same command line with "pull" instead of "fetch"). While it might make sense to store what you want to pull, it typically is plain wrong when the current branch is "master". This should only be allowed when (an incorrect) "git pull origin master:master" tries to work around by giving --update-head-ok to underlying "git fetch", and otherwise we should refuse it, but somewhere along the lines we lost that behavior. The check for the current branch is now _only_ performed in non-bare repositories, which is an improvement from the original behaviour. Some newer tests were depending on the broken behaviour of "git fetch" this patch fixes, and have been adjusted. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Shawn O. Pearce <spearce@spearce.org> Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Junio C Hamano	494202524f	t5510: test "git fetch" following tags minimally When "git fetch" auto-follows tags, it should not download excess ones. This new test makes sure that condition. Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Nanako Shiraishi	3604e7c5c6	tests: use "git xyzzy" form (t3600 - t6999) Converts tests between t3600-t6300. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Stephan Beyer	d492b31caf	t/: Use "test_must_fail git" instead of "! git" This patch changes every occurrence of "! git" -- with the meaning that a git call has to gracefully fail -- into "test_must_fail git". This is useful to - make sure the test does not fail because of a signal, e.g. SIGSEGV, and - advertise the use of "test_must_fail" for new tests. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Jeff King	9a7bbd1dd1	clean up error conventions of remote.c:match_explicit match_explicit is called for each push refspec to try to fully resolve the source and destination sides of the refspec. Currently, we look at each refspec and report errors on both the source and the dest side before aborting. It makes sense to report errors for each refspec, since an error in one is independent of an error in the other. However, reporting errors on the 'dst' side of a refspec if there has been an error on the 'src' side does not necessarily make sense, since the interpretation of the 'dst' side depends on the 'src' side (for example, when creating a new unqualified remote ref, we use the same type as the src ref). This patch lets match_explicit return early when the src side of the refspec is bogus. We still look at all of the refspecs before aborting the push, though. At the same time, we clean up the call signature, which previously took an extra "errs" flag. This was pointless, as we didn't act on that flag, but rather just passed it back to the caller. Instead, we now use the more traditional "return -1" to signal an error, and the caller aggregates the error count. This change fixes two bugs, as well: - the early return avoids a segfault when passing a NULL matched_src to guess_ref() - the check for multiple sources pointing to a single dest aborted if the "err" flag was set. Presumably the intent was not to bother with the check if we had no matched_src. However, since the err flag was passed in from the caller, we might abort the check just because a previous refspec had a problem, which doesn't make sense. In practice, this didn't matter, since due to the error flag we end up aborting the push anyway. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Jeff King	82ebb0b6ec	add test_cmp function for test scripts Many scripts compare actual and expected output using "diff -u". This is nicer than "cmp" because the output shows how the two differ. However, not all versions of diff understand -u, leading to unnecessary test failure. This adds a test_cmp function to the test scripts and switches all "diff -u" invocations to use it. The function uses the contents of "$GIT_TEST_CMP" to compare its arguments; the default is "diff -u". On systems with a less-capable diff, you can do: GIT_TEST_CMP=cmp make test Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	41ac414ea2	Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test should succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	c701596199	t5510: add a bit more tests for fetch "git pull/fetch" that gets explicit refspecs from the command line should not update configured tracking refs. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Johannes Schindelin	c5546e88fe	bundle create: keep symbolic refs' names instead of resolving them When creating a bundle, symbolic refs used to be resolved to the non-symbolic refs they point to before being written to the list of contained refs. I.e. "git bundle create a1.bundle HEAD master" would show something like 388afe7881b33102fada216dd07806728773c011 refs/heads/master 388afe7881b33102fada216dd07806728773c011 refs/heads/master instead of 388afe7881b33102fada216dd07806728773c011 HEAD 388afe7881b33102fada216dd07806728773c011 refs/heads/master Introduce a special handling so that the symbolic refs are listed with the names passed on the command line. Noticed by Santi Béjar. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Steffen Prohaska	605b4978a1	refactor fetch's ref matching to use refname_match() The old rules used by fetch were coded as a series of ifs. The old rules are: 1) match full refname if it starts with "refs/" or matches "HEAD" 2) verify that full refname starts with "refs/" 3) match abbreviated name in "refs/" if it starts with "heads/", "tags/", or "remotes/". 4) match abbreviated name in "refs/heads/" This is replaced by the new rules a) match full refname b) match abbreviated name prefixed with "refs/" c) match abbreviated name prefixed with "refs/heads/" The details of the new rules are different from the old rules. We no longer verify that the full refname starts with "refs/". The new rule (a) matches any full string. The old rules (1) and (2) were stricter. Now, the caller is responsible for using sensible full refnames. This should be the case for the current code. The new rule (b) is less strict than old rule (3). The new rule accepts abbreviated names that start with a non-standard prefix below "refs/". Despite this modifications the new rules should handle all cases as expected. Two tests are added to verify that fetch does not resolve short tags or HEAD in remotes. We may even think about loosening the rules a bit more and unify them with the rev-parse rules. This would be done by replacing ref_ref_fetch_rules with ref_ref_parse_rules. Note, the two new test would break. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Johannes Sixt	c2015b3ae0	Fix an infinite loop in sq_quote_buf(). sq_quote_buf() treats single-quotes and exclamation marks specially, but it incorrectly parsed the input for single-quotes and backslashes. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Johannes Schindelin	da0204df58	fetch: if not fetching from default remote, ignore default merge When doing "git fetch <remote>" on a remote that does not have the branch referenced in branch.<current-branch>.merge, git fetch failed. It failed because it tried to add the "merge" ref to the refs to be fetched. Fix that. And add a test case. Incidentally, this unconvered a bug in our own test suite, where "git pull <some-path>" was expected to merge the ref given in the defaults, even if not pulling from the default remote. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Lars Hjemli <hjemli@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>	17 years ago
Väinö Järvelä	f539d0d6c1	Added a test for fetching remote tags when there is not tags. When a user runs "git fetch -t", git crashes when it doesn't find any tags on the remote repository. Signed-off-by: Väinö Järvelä <v@pp.inet.fi> Signed-off-by: Lars Hjemli <hjemli@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>	17 years ago
Johannes Schindelin	cd547b4886	fetch/push: readd rsync support We lost rsync support when transitioning from shell to C. Support it again (even if the transport is technically deprecated, some people just do not have any chance to use anything else). Also, add a test to t5510. Since rsync transport is not configured by default on most machines, and especially not such that you can write to rsync://127.0.0.1$(pwd)/, it is disabled by default; you can enable it by setting the environment variable TEST_RSYNC. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	7fa8254f94	allow git-bundle to create bottomless bundle While "git bundle" was a useful way to sneakernet incremental changes, we did not allow: $ git bundle create v2.6.20.bndl v2.6.20 to create a bundle that contains the whole history to a well-known good revision. Such a bundle can be mirrored everywhere, and people can prime their repository with it to reduce the load on the repository that serves near the tip of the development. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Shawn O. Pearce	6016e35bc1	Fix t5510-fetch's use of sed POSIX says sed may add a trailing LF if there isn't already one there. We shouldn't rely on it not adding that LF, as some systems (Mac OS X for example) will add it. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Johannes Schindelin	18449ab0e9	git-bundle: avoid packing objects which are in the prerequisites When saying something like "--since=1.day.ago" or "--max-count=5", git-bundle finds the boundary commits which are recorded as prerequisites. However, it failed to tell pack-objects _not_ to pack the objects which are in these. Fix that. And add a test for that. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Johannes Schindelin	8315588b59	bundle: fix wrong check of read_header()'s return value & add tests If read_header() fails, it returns <0, not 0. Further, an open(/dev/null) was not checked for errors. Also, this adds two tests to make sure that the bundle file looks correct, by checking if it has the header has the expected form, and that the pack contains the right amount of objects. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Johannes Schindelin	2e0afafebd	Add git-bundle: move objects and references by archive Some workflows require use of repositories on machines that cannot be connected, preventing use of git-fetch / git-push to transport objects and references between the repositories. git-bundle provides an alternate transport mechanism, effectively allowing git-fetch and git-pull to operate using sneakernet transport. `git-bundle create` allows the user to create a bundle containing one or more branches or tags, but with specified basis assumed to exist on the target repository. At the receiving end, git-bundle acts like git-fetch-pack, allowing the user to invoke git-fetch or git-pull using the bundle file as the URL. git-fetch and git-ls-remote determine they have a bundle URL by checking that the URL points to a file, but are otherwise unchanged in operation with bundles. The original patch was done by Mark Levedahl <mdl123@verizon.net>. It was updated to make git-bundle a builtin, and get rid of the tar format: now, the first line is supposed to say "# v2 git bundle", the next lines either contain a prerequisite ("-" followed by the hash of the needed commit), or a ref (the hash of a commit, followed by the name of the ref), and finally the pack. As a result, the bundle argument can be "-" now. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Tom Prince	e0d10e1c63	[PATCH] Rename git-repo-config to git-config. Signed-off-by: Tom Prince <tom.prince@ualberta.net> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Nicolas Pitre	5c94f87e6b	use 'init' instead of 'init-db' for shipped docs and tools While 'init-db' still is and probably will always remain a valid git command for obvious backward compatibility reasons, it would be a good idea to move shipped tools and docs to using 'init' instead. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	75c384efb5	Do not create $GIT_DIR/remotes/ directory anymore. Because we do not use --no-separate-remote anymore, there is no reason to create that directory from the template. t5510 test is updated to test both $GIT_DIR/remotes/ based configuration and $GIT_DIR/config variable (credits to Johannes). Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	171e800b37	Revert "fix testsuite: make sure they use templates freshly built from the source" This reverts commit `74d20040ca`. Version from Johannes to introduce GIT_TEMPLATE_DIR is simpler, although I unconsciously stayed away from introducing yet another environment variable.	18 years ago
Junio C Hamano	74d20040ca	fix testsuite: make sure they use templates freshly built from the source The initial t/trash repository for testing was created properly but over time we gained many tests that create secondary test repositories with init-db or clone and they were not careful enough. This fixes it. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	6c96c0f194	git-fetch: follow lightweit tags as well. This side-ports commit fd19f620 from Cogito, in which I fixed exactly the same bug. Somehow nobody noticed this for a long time in git. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Santi Béjar	6cc7c36d5e	Add test for the default merges in fetch. [jc: with minor fix-ups] Signed-off-by: Santi Béjar <sbejar@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	7be1d62c6f	Add t5510 to test per branch configuration affecting git-fetch. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago

33 Commits (eb80042c6a631aee74bd0d1b1dd845784e9788cd)