kernel/git - git - PowerEL Git System

14850 Commits

6 Branches

36 Tags

131 MiB

Tree: e965647334

Commit Graph

Author	SHA1	Message	Date
Junio C Hamano	a6080a0a44	War on whitespace This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Linus Torvalds	3443546f6e	Use a real built-in diff generator This uses a simplified libxdiff setup to generate unified diffs _without_ doing fork/execve of GNU "diff". This has several huge advantages, for example: Before: [torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null real 0m24.818s user 0m13.332s sys 0m8.664s After: [torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null real 0m4.563s user 0m2.944s sys 0m1.580s and the fact that this should be a lot more portable (ie we can ignore all the issues with doing fork/execve under Windows). Perhaps even more importantly, this allows us to do diffs without actually ever writing out the git file contents to a temporary file (and without any of the shell quoting issues on filenames etc etc). NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the current "diff-core" code actually will always write the temp-files, because it used to be something that you simply had to do. So this current one actually writes a temp-file like before, and then reads it into memory again just to do the diff. Stupid. But if this basic infrastructure is accepted, we can start switching over diff-core to not write temp-files, which should speed things up even further, especially when doing big tree-to-tree diffs. Now, in the interest of full disclosure, I should also point out a few downsides: - the libxdiff algorithm is different, and I bet GNU diff has gotten a lot more testing. And the thing is, generating a diff is not an exact science - you can get two different diffs (and you will), and they can both be perfectly valid. So it's not possible to "validate" the libxdiff output by just comparing it against GNU diff. - GNU diff does some nice eye-candy, like trying to figure out what the last function was, and adding that information to the "@@ .." line. libxdiff doesn't do that. - The libxdiff thing has some known deficiencies. In particular, it gets the "\No newline at end of file" case wrong. So this is currently for the experimental branch only. I hope Davide will help fix it. That said, I think the huge performance advantage, and the fact that it integrates better is definitely worth it. But it should go into a development branch at least due to the missing newline issue. Technical note: this is based on libxdiff-0.17, but I did some surgery to get rid of the extraneous fat - stuff that git doesn't need, and seriously cutting down on mmfile_t, which had much more capabilities than the diff algorithm either needed or used. In this version, "mmfile_t" is just a trivial <pointer,length> tuple. That said, I tried to keep the differences to simple removals, so that you can do a diff between this and the libxdiff origin, and you'll basically see just things getting deleted. Even the mmfile_t simplifications are left in a state where the diffs should be readable. Apologies to Davide, whom I'd love to get feedback on this all from (I wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old complex format had a helper function for that, but I did my surgery with the goal in mind that eventually we _should_ just do mmfile_t mf; buf = read_sha1_file(sha1, type, &size); mf->ptr = buf; mf->size = size; .. use "mf" directly .. which was really a nightmare with the old "helpful" mmfile_t, and really is that easy with the new cut-down interfaces). [ Btw, as any hawk-eye can see from the diff, this was actually generated with itself, so it is "self-hosting". That's about all the testing it has gotten, along with the above kernel diff, which eye-balls correctly, but shows the newline issue when you double-check it with "git-apply" ] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago

Author

SHA1

Message

Date

Junio C Hamano

a6080a0a44

War on whitespace

This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time.  There are a few files that need
to have trailing whitespaces (most notably, test vectors).  The results
still passes the test, and build result in Documentation/ area is unchanged.

Signed-off-by: Junio C Hamano <gitster@pobox.com>

18 years ago

Linus Torvalds

3443546f6e

Use a *real* built-in diff generator

This uses a simplified libxdiff setup to generate unified diffs _without_
doing  fork/execve of GNU "diff".

This has several huge advantages, for example:

Before:

	[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null

	real    0m24.818s
	user    0m13.332s
	sys     0m8.664s

After:

	[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null

	real    0m4.563s
	user    0m2.944s
	sys     0m1.580s

and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).

Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).

NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.

But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.

Now, in the interest of full disclosure, I should also point out a few
downsides:

 - the libxdiff algorithm is different, and I bet GNU diff has gotten a
   lot more testing. And the thing is, generating a diff is not an exact
   science - you can get two different diffs (and you will), and they can
   both be perfectly valid. So it's not possible to "validate" the
   libxdiff output by just comparing it against GNU diff.

 - GNU diff does some nice eye-candy, like trying to figure out what the
   last function was, and adding that information to the "@@ .." line.
   libxdiff doesn't do that.

 - The libxdiff thing has some known deficiencies. In particular, it gets
   the "\No newline at end of file" case wrong. So this is currently for
   the experimental branch only. I hope Davide will help fix it.

That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.

Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.

That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.

Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do

	mmfile_t mf;

	buf = read_sha1_file(sha1, type, &size);
	mf->ptr = buf;
	mf->size = size;
	.. use "mf" directly ..

which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).

[ Btw, as any hawk-eye can see from the diff, this was actually generated
  with itself, so it is "self-hosting". That's about all the testing it
  has gotten, along with the above kernel diff, which eye-balls correctly,
  but shows the newline issue when you double-check it with "git-apply" ]

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>

19 years ago

2 Commits (e9656473342e050494c8ea8416fdfdcf52fd1c93)