During `git repack -a -d` only repack objects which are loose or
which reside in an active (a non-kept) pack. This allows the user
to keep large packs as-is without continuous repacking and can be
very helpful on large repositories. It should also help us resolve
a race condition between `git repack -a -d` and the new pack store
functionality in `git-receive-pack`.
Kept packs are those which have a corresponding .keep file in
$GIT_OBJECT_DIRECTORY/pack. That is pack-X.pack will be kept
(not repacked and not deleted) if pack-X.keep exists in the same
directory when `git repack -a -d` starts.
Currently this feature is not documented and there is no user
interface to keep an existing pack.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When configuration variable `repack.UseDeltaBaseOffset` is set
for the repository, the command passes `--delta-base-offset`
option to `git-pack-objects`; this typically results in slightly
smaller packs, but the generated packs are incompatible with
versions of git older than (and including) v1.4.3.
We will make it default to true sometime in the future, but not
for a while.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that we explicitly create all tmpfiles below $GIT_DIR, there's no reason
to care about which directory we're in.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Avoid failing when cwd is !writable by writing the
packfiles in $GIT_DIR, which is more in line with other commands.
Without this, git-repack was failing when run from crontab
by non-root user accounts. For large repositories, this
also makes the mv operation a lot cheaper, and avoids leaving
temp packfiles around the fs upon failure.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes the following warning:
git-repack: line 42: cd: .git/objects/pack: No such file or directory
This happens only, when git-repack -a is run without any packs in the
repository.
Signed-off-by: Matthias Kestenholz <matthias@spinlock.ch>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We are trying to catch error condition of git-rev-list and cause
the downstream pack-objects to barf, but if you run rev-list
with anything that mucks with its stderr (such as GIT_TRACE),
any stderr output would cause the pipeline to fail.
[jc: originally from Matthias Lederhofer, with a reworded error message.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
After a clone, packfiles are read-only by default and "mv" to
replace the pack with a new one goes interactive, asking if the
user wants to replace it. If one is successfully moved and the
other is not, the pack and its idx would become out-of-sync and
corrupts the repository.
Recovering is straightforward -- it is just the matter of
finding the remaining .tmp-pack-* and make sure they are both
moved -- but we should be extra careful not to do something so
alarming to the users.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-repack was passing the -q along to pack-objects but ignoring it
itself. Correct the oversight.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If all objects are reachable via an alternate object store then we
still have to remove all obsolete local packs.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
.. but don't even bother documenting it. I don't think any normal person
is supposed to ever really care, but it simplifies testing when you want
to use the "git repack" wrapper rather than forcing you to use the core
programs (which already do support the window/depth arguments, of course).
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use git-rev-list's --all instead of git-rev-parse's to keep from
hitting the shell's argument list length limits when repacking
with lots of tags.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A new flag -q makes underlying pack-objects less chatty.
A new flag -f forces delta to be recomputed from scratch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A new flag -q makes underlying pack-objects less chatty.
A new flag -f forces delta to be recomputed from scratch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now all the users of this script detect its exit status and die,
complaining that it is outside git repository. So move the code
that dies from all callers to git-sh-setup script.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In a corrupt repository, git-repack produces a pack that does not
contain needed objects without complaining, and the result of this
combined with -d flag can be very painful -- e.g. a lossage of one
tree object can lead to lossage of blobs reachable only through that
tree.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With "-a", redundant pack removal is trivial, and otherwise
redundant pack removal is pointless; do not call
git-redundant-pack from this script.
Signed-off-by: Junio C Hamano <junkio@cox.net>
No point in running git-pack-redundant if we already know
which packs are redundant.
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch changes git-pack-redundant so that packfiles
in alternate object directories also are considered when
deciding which objects are redundant.
This functionality is controlled by the flag '--alt-odb'.
Also convert the other flags to the long form, and update
docs and git-repack accordingly.
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch renames git-pack-intersect to git-pack-redundant
as suggested by Petr Baudis. The new name reflects what the
program does, rather than how it does it.
Also fix a small argument parsing bug.
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git philosophy when it comes to disk accesses is "Laugh in the face of
danger".
Notably, since we never modify an existing object, we don't really care
that deeply about flushing things to disk, since even if the machine
crashes in the middle of a git operation, you can never really have lost
any old work. At most, you'd need to figure out the proper heads (which
git-fsck-objects can do for you) and re-do the operation.
However, there's two exceptions to this: pruning and repacking. Those
operations will actually _delete_ old objects that they know about in
other ways (ie that they just repacked, or that they have found in other
places).
However, since they actually modify old state, we should thus be a bit
more careful about them. If the machine crashes and the duplicate new
objects haven't been flushed to disk, you can actually be in trouble.
This is trivially stupid about it by calling "sync" before removing the
objects. Not very smart, but we're talking about special operations than
are usually done once a week if that.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This uses the new "--local" flag to git-pack-objects. It currently only
makes a difference together with "-a", since a normal incremental repack
won't pack any packed objects at all (whether local or remote).
Eventually, it might end up skipping any objects that aren't local to
the current object directory, but for now it only knows to skip packed
objects.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Using "git repack -a -d" can destroy your git archive if you use it
twice in succession, because the new pack can be called the same as
the old pack. Found by Linus.
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This originally came from Frank Sorenson, but with a bit of rework to
allow future enhancements without changing the external interface for
pack pruning part.
With the '-a' option, all objects in the current repository are packed
into a single pack. When the '-d' option is given at the same time,
existing packs that were made redundant by this round of repacking are
deleted.
Since we currently have only two repacking strategies, one with '-a'
(everything into one) and the other without '-a' (incrementally pack
only the unpacked ones), the '-d' option is meaningful only when used
with '-a'; it removes the packs existed before we did the "everything
into one" repacking. At least for now.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Acked-by: Frank Sorenson <frank@tuxrocks.com>
(cherry picked from bfed505327e31221d8de796b3af880bad696b149 commit)
Pulling from a packed repository over dumb transport without the
server info file fails, so run update-server-info automatically
after a repack by default. This can be disabled with the '-n'
flag.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It sets up the normal git environment variables and a few helper
functions (currently just "die()"), and returns ok if it all looks like
a git archive. So use it something like
. git-sh-setup-script || die "Not a git archive"
to make the rest of the git scripts more careful and readable.
This means that the .git/objects/pack directory is also rsync'able,
since the filenames created there-in are either unique or refer to the
same data.
Otherwise you might not be able to pull from a directory that is partly
packed without having to worry about missing objects due to pack-file
name clashes.
Nicolas Pitre