Multiple work dirs with git svn caused each work dir to have its own
stale copy of the SVN meta data in .git/svn
git svn rebase updates commits with git-svn-id: in the repository and
stores the SVN meta data information only in that work dir. Attempting to
git svn rebase in other work dirs for the same branch would fail because
the last revision fetched according to the git-svn-id is greater than the
revision in the SVN meta data for that work directory.
Signed-off-by: Bernt Hansen <bernt@norang.ca>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-status used the buffer name to find git-status buffers, and that
can fail if the buffer has another name, for example when multiple
working directories is tracked.
Signed-off-by: Rémi Vanicat <vanicat@debian.org>
Acked-by: Alexandre Julliard <julliard@winehq.org>
Tested-by: Xavier Maillard <xma@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug in the hg-to-git convertor introduced by commit
1bc7c13af9f936aa80893100120b542338a10bf4: when searching the changeset
parents, 'hg log' returns an extra space at the end of the line, which
confuses the .split(' ') based tokenizer:
Traceback (most recent call last):
File "hg-to-git.py", line 123, in <module>
hgchildren[mparent] += ( str(cset), )
KeyError: ''
Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch improves all of the popen calls in hg-to-git.py by specifying the
template 'hg log' should use instead of calling 'hg log' and grepping for the
desired data.
Signed-off-by: Mark Drago <markdrago@gmail.com>
Acked-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch all git command calls to use the git (space) command format, and
remove the use of git-repo-config in place of git config.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't set the needs-refresh flag when inserting a new file info, since
ewoc refreshes it upon insert already; this makes a full refresh twice
as fast.
Also make git-fileinfo-prettyprint a little faster by not retrieving
permission values twice.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of just setting the state to up-to-date, retrieve the full
state again, so that the file type can be displayed properly.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Skip non-zero stage files during git-ls-files -c, they are handled
later. Also fix git-insert-info-list to merge duplicate file names.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Handle the T status from git-diff-index to display type changes
between file/symlink/subproject. Also always show the file type for
symlink and subprojects to indicate that they are not normal files.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows displaying correctly the executable flag for the initial
commit, and will make it possible to show the file type for up-to-date
symlinks and subprojects.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Take advantage of the new log-edit feature that allows to show a diff
with C-c C-d while editing the log message.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a convention that commands containing a double-dash
are implementation details and not to be used by mortals. We
should automatically remove them from the completion
suggestions as such.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally written by Rémi Vanicat, I just changed the layout a little.
Signed-off-by: Rémi Vanicat <vanicat@debian.org>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark Drago had a subversion repository which was then converted to hg
and now is moving in to git. The first commit in the svn repo was
just the creation of the empty directory. This made its way in to the
hg repository fine, but converting from hg to git would cause an
error. The problem was that hg-to-git.py tries to commit the change,
git-commit fails, and then hg-to-git.py tries to checkout the new
revision and that fails (because it was not created). This may have
only caused an error because it was the first commit in the
repository. If an empty directory was added in the middle of the repo
somewhere things might have worked out fine.
This patch will use the new --allow-empty option to git-commit to
record such an "empty" commit, to reproduce the history recorded in hg
more faithfully.
Tested-by: Mark Drago <markdrago@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The remotes2config.sh script replaced all 'unsafe' characters in repo
name with '.'; include '-' in the 'safe' characters set (the set is
probably even larger).
Script required also space after "URL:", "Push:" and "Pull:" in
remotes file. This for example made the following remote
URL: git://git.kernel.org/pub/scm/git/git.git
Pull: refs/heads/master:refs/heads/origin
Pull:+refs/heads/pu:refs/heads/pu
miss 'pu' branch (forced branch) in config file after conversion.
Allow for any number of whitespace after "URL:", "Push:", "Pull:".
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I use "git diff" (the porcelain) really often, and am almost as often
annoyed that the completions do not know how to complete something simple
as --cached. Now they do.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes git commit a builtin and moves git-commit.sh to
contrib/examples. This also removes the git-runstatus
helper, which was mostly just a git-status.sh implementation detail.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Except that this fixes a longstanding corner case bug by
tightening the way underlying diff-index command is run, it is
functionally equivalent to the scripted version.
Signed-off-by: Thomas Harning Jr <harningt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Importing both gtksourceview and gtksourceview2 will make python segfault
on my system (ubuntu 7.10). Change so that gtksourceview is only imported
if importing gtksourceview2 fails. This should be safe as gtksourceview
is only used if gtksourceview2 is not available.
Signed-off-by: Anton Gyllenberg <anton@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces git-clean.sh with builtin-clean.c, and moves
git-clean.sh to the examples.
This also introduces a change in behavior when removing directories
explicitly specified as a path. For example currently:
1. When dir has only untracked files, these two behave differently:
$ git clean -n dir
$ git clean -n dir/
the former says "Would not remove dir/", while the latter would say
"Would remove dir/untracked" for all paths under it, but not the
directory itself.
With -d, the former would stop refusing, however since the user
explicitly asked to remove the directory the -d is no longer required.
2. When there are more parameters:
$ git clean -n dir foo
$ git clean -n dir/ foo
both cases refuse to remove dir/ unless -d is specified. Once again
since both cases requested to remove dir the -d is no longer required.
Thanks to Johannes Schindelin for the conversion to using the
parse-options API.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using an existing git repository to cache the perforce import we don't
fetch the branch mapping from perforce as that is a slow operation. However
the origin repository may not be fully up-to-date and therefore it may be
necessary to import more changes directly from Perforce.
Such a direct import needs self.knownBranches to be set up though, so
initialize it from the existing p4/* git branches.
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Email subjects are prefixed with "[SCM] " by default, make this optionally
configurable through the hooks.emailprefix config option.
Suggested by martin f krafft through
http://bugs.debian.org/428418
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This actually replaces peek-remote with ls-remote, since peek-remote
now handles everything. peek-remote remains an a second name for
ls-remote, although its help message now gives the "ls-remote" name.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changeset takes advantage of the new parseDiffTreeEntry(...) function to
detect changes to the execute bit in the git repository. During submit, git-p4
now looks for changes to the executable bit and if it finds them it "reopens"
the file in perforce, which allows it to change the file type.
The logic for adding the executable bit in perforce is straightforward: the +x
modifier can be used. Removing the executable bit in perforce requires that the
entire filetype be redefined (there is no way to join remove the bit with a -x
modifier, for example). This changeset includes logic to remove the executable
bit from the full file type while preserving the base file type and other
modifiers.
Signed-off-by: Chris Pettitt <cpettitt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This has been proposed for a few times without much reaction
from the list. Actually remove it to see who screams.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current git-p4 implementation does support file renames. However, because
it does not use the "p4 integrate" command, the history for the renamed file is
not linked to the new file.
This changeset adds support for perforce renames with the integrate command.
Currently this feature is only enabled when calling git-p4 submit with the -M
option. This is intended to look and behave similar to the "detect renames"
feature of other git commands.
The following sequence is used for renamed files:
p4 integrate -Dt x x'
p4 edit x'
rm x'
git apply
p4 delete x
By default, perforce will not allow an integration with a target file that has
been deleted. That is, if x' in the example above is the name of a previously
deleted file then perforce will fail the integrate. The -Dt option tells
perforce to allow the target of integrate to be a previously deleted file.
Signed-off-by: Chris Pettitt <cpettitt@gmail.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
post-receive-email has one place where the variable fast_forward is not
spelled correctly. At the same place the logic was reversed. The
combination of both bugs made the script work correctly for fast-forward
commits but not for non-fast-forward ones. This change fixes this to
be correct in both cases.
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Given that git uses 'commit', git-p4's 'sumbit' was a bit confusing at times;
often making me do 'git submit' and 'git-p4 commit' instead.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Acked-By: Simon Hausmann <simon@lst.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Added support for gtksourceview2 module (pygtksourceview 1.90.x) in
gitview. Also refactored code that creates the source buffer and view.
Signed-off-by: Frederick Akalin <akalin@akalin.cx>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Have the error message for missing recipients actually report the
missing config variable and not a fictional one.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Using the name of the committer of the revision at the tip of the
updated ref is not sensible. That information is available in the email
itself should it be wanted, and by supplying a "From", we were
effectively hiding the person who performed the push - which is useful
information in itself.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead print a single message around sequences of commands that can
potentially take some time.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bernt Hansen