NOTE! This makes "-c" be the default, which effectively means that merges
are never ignored any more, and "-m" is a no-op. So it changes semantics.
I would also like to make "--cc" the default if you do patches, but didn't
actually do that.
The raw output format is not wonderfully pretty, but it's distinguishable
from a "normal patch" in that a normal patch with just one parent has just
one colon at the beginning, while a multi-parent raw diff has <n> colons
for <n> parents.
So now, in the kernel, when you do
git-diff-tree cce0cac125623f9b68f25dd1350f6d616220a8dd
(to see the manual ARM merge that had a conflict in arch/arm/Kconfig), you
get
cce0cac125623f9b68f25dd1350f6d616220a8dd
::100644 100644 100644 4a63a8e2e45247a11c068c6ed66c6e7aba29ddd9 77eee38762d69d3de95ae45dd9278df9b8225e2c 2f61726d2f4b636f6e66696700dbf71a59dad287 arch/arm/Kconfig
ie you see two colons (two parents), then three modes (parent modes
followed by result mode), then three sha1s (parent sha1s followed by
result sha1).
Which is pretty close to the normal raw diff output.
Cool/stupid exercise:
$ git-whatchanged | grep '^::' | cut -f2- | sort |
uniq -c | sort -n | less -S
will show which files have needed the most file-level merge conflict
resolution. Useful? Probably not. But kind of interesting.
For the kernel, it's
....
10 arch/ia64/Kconfig
11 drivers/scsi/Kconfig
12 drivers/net/Makefile
17 include/linux/libata.h
18 include/linux/pci_ids.h
23 drivers/net/Kconfig
24 drivers/scsi/libata-scsi.c
28 drivers/scsi/libata-core.c
43 MAINTAINERS
Signed-off-by: Junio C Hamano <junkio@cox.net>
The earlier round failed to make --really-refresh to mark
up-to-date index entry to valid again due to a trivial thinko.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When git-ls-files -o --exclude-per-directory=.gitignore is run
from a subdirectory, it did not read from .gitignore from its
parent directory. Reading from them makes output from these two
commands consistent:
$ git ls-files -o --exclude-per-directory=.gitignore Documentation
$ cd Documentation &&
git ls-files -o --exclude-per-directory=.gitignore
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/nostat:
ls-files: debugging aid for CE_VALID changes.
"Assume unchanged" git: do not set CE_VALID with --refresh
"Assume unchanged" git
* jc/empty-commit:
t6000: fix a careless test library add-on.
Do not allow empty name or email.
It tried to "restore" GIT_AUTHOR_EMAIL environment variable but
the variable started out as unset, so ended up setting it to an
empty string. This is now caught as an error.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of silently allowing to create a bogus commit that lacks
information by mistake, complain loudly and die.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is not really part of the proposed updates for CE_VALID,
but with this change, ls-files -t shows CE_VALID paths with
lowercase tag letters instead of the usual uppercase. Useful
for checking out what is going on.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When working with automatic assume-unchanged mode using
core.ignorestat, setting CE_VALID after --refresh makes things
more cumbersome to use. Consider this scenario:
(1) the working tree is on a filesystem with slow lstat(2).
The user sets core.ignorestat = true.
(2) "git checkout" to switch to a different branch (or initial
checkout) updates all paths and the index starts out with
"all clean".
(3) The user knows she wants to edit certain paths. She uses
update-index --no-assume-unchanged (we could call it --edit;
the name is inmaterial) to mark these paths and starts
editing.
(4) After editing half of the paths marked to be edited, she
runs "git status". This runs "update-index --refresh" to
reduce the false hits from diff-files.
(5) Now the other half of the paths, since she has not changed
them, are found to match the index, and CE_VALID is set on
them again.
For this reason, this commit makes update-index --refresh not to
set CE_VALID even after the path without CE_VALID are verified
to be up to date. The user still can run --really-refresh to
force lstat() to match the index entries to the reality.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds "assume unchanged" logic, started by this message in the list
discussion recently:
<Pine.LNX.4.64.0601311807470.7301@g5.osdl.org>
This is a workaround for filesystems that do not have lstat()
that is quick enough for the index mechanism to take advantage
of. On the paths marked as "assumed to be unchanged", the user
needs to explicitly use update-index to register the object name
to be in the next commit.
You can use two new options to update-index to set and reset the
CE_VALID bit:
git-update-index --assume-unchanged path...
git-update-index --no-assume-unchanged path...
These forms manipulate only the CE_VALID bit; it does not change
the object name recorded in the index file. Nor they add a new
entry to the index.
When the configuration variable "core.ignorestat = true" is set,
the index entries are marked with CE_VALID bit automatically
after:
- update-index to explicitly register the current object name to the
index file.
- when update-index --refresh finds the path to be up-to-date.
- when tools like read-tree -u and apply --index update the working
tree file and register the current object name to the index file.
The flag is dropped upon read-tree that does not check out the index
entry. This happens regardless of the core.ignorestat settings.
Index entries marked with CE_VALID bit are assumed to be
unchanged most of the time. However, there are cases that
CE_VALID bit is ignored for the sake of safety and usability:
- while "git-read-tree -m" or git-apply need to make sure
that the paths involved in the merge do not have local
modifications. This sacrifices performance for safety.
- when git-checkout-index -f -q -u -a tries to see if it needs
to checkout the paths. Otherwise you can never check
anything out ;-).
- when git-update-index --really-refresh (a new flag) tries to
see if the index entry is up to date. You can start with
everything marked as CE_VALID and run this once to drop
CE_VALID bit for paths that are modified.
Most notably, "update-index --refresh" honours CE_VALID and does
not actively stat, so after you modified a file in the working
tree, update-index --refresh would not notice until you tell the
index about it with "git-update-index path" or "git-update-index
--no-assume-unchanged path".
This version is not expected to be perfect. I think diff
between index and/or tree and working files may need some
adjustment, and there probably needs other cases we should
automatically unmark paths that are marked to be CE_VALID.
But the basics seem to work, and ready to be tested by people
who asked for this feature.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In fetch_object, there's a call to release an object request if the
object mysteriously arrived, say in a pack. Unfortunately, the fetch
attempt for this object might already be in progress, and we'll leak the
descriptor. Instead, try to tidy away the request.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Don't mention it in docs or --help output.
Remove mbox, date and author variables from git-format-patch.sh.
Use DESCRIPTION text from man-page to update LONG_USAGE output. It's
a bit silly to have two texts saying the same thing in different words,
and I'm too lazy to update both.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Introduce --only flag to allow the new "partial commit"
semantics when paths are specified. The default is still the
traditional --include semantics. Once peoples' fingers and
scripts that want the traditional behaviour are updated to
explicitly say --include, we could change it to either default
to --only, or refuse to operate without either --only/--include
when paths are specified.
This also fixes a couple of bugs in the previous round. Namely:
- forgot to save/restore index in some cases.
- forgot to use the temporary index to show status when '--only
paths...' semantics was used.
- --author did not take precedence when reusing an existing
commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
- "git commit" without _any_ parameter keeps the traditional
behaviour. It commits the current index.
We commit the whole index even when this form is run from a
subdirectory.
- "git commit --include paths..." (or "git commit -i paths...")
is equivalent to:
git update-index --remove paths...
git commit
- "git commit paths..." acquires a new semantics. This is an
incompatible change that needs user training, which I am
still a bit reluctant to swallow, but enough people seem to
have complained that it is confusing to them. It
1. refuses to run if $GIT_DIR/MERGE_HEAD exists, and reminds
trained git users that the traditional semantics now needs
-i flag.
2. refuses to run if named paths... are different in HEAD and
the index (ditto about reminding). Added paths are OK.
3. reads HEAD commit into a temporary index file.
4. updates named paths... from the working tree in this
temporary index.
5. does the same updates of the paths... from the working
tree to the real index.
6. makes a commit using the temporary index that has the
current HEAD as the parent, and updates the HEAD with this
new commit.
- "git commit --all" can run from a subdirectory, but it updates
the index with all the modified files and does a whole tree
commit.
- In all cases, when the command decides not to create a new
commit, the index is left as it was before the command is
run. This means that the two "git diff" in the following
sequence:
$ git diff
$ git commit -a
$ git diff
would show the same diff if you abort the commit process by
making the commit log message empty.
This commit also introduces much requested --author option.
$ git commit --author 'A U Thor <author@example.com>'
Signed-off-by: Junio C Hamano <junkio@cox.net>
In a workflow that employs relatively long lived topic branches,
the developer sometimes needs to resolve the same conflict over
and over again until the topic branches are done (either merged
to the "release" branch, or sent out and accepted upstream).
This commit introduces a new command, "git rerere", to help this
process by recording the conflicted automerge results and
corresponding hand-resolve results on the initial manual merge,
and later by noticing the same conflicted automerge and applying
the previously recorded hand resolution using three-way merge.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In addition to the branch names, populate the log message with
one-line description from actual commits that are being merged.
This was prompted by Len's 12-way octopus. You need to have
'merge.summary' in the configuration file to enable it:
$ git repo-config merge.summary yes
Signed-off-by: Junio C Hamano <junkio@cox.net>
A new flag --aggressive resolves what we traditionally resolved
with external git-merge-one-file inside index while read-tree
3-way merge works.
git-merge-octopus and git-merge-resolve use this flag before
running git-merge-index with git-merge-one-file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the first part uses quoted-printable to protect iso8859-1
name in the commit log, and the second part was plain ascii text
patchfile without even Content-Transfer-Encoding subheader, we
incorrectly tried to decode the patch as quoted printable.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The sections on git urls and remotes files in the git-fetch,
git-pull, and git-push manpages seem long enough to be worth a
manpage section of their own.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The push and pull man pages include a bunch of shared text from
pull-fetch-param.txt. This simplifies maintenance somewhat, but
there's actually quite a bit of text that applies only to one or the
other.
So, separate out the push- and pull/fetch-specific text into
pull-fetch-param.txt and git-push.txt, then include the largest chunk
of common stuff (the description of protocols and url's) from
urls.txt. That cuts some irrelevant stuff from the man pages without
making us duplicate too much.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we remove a file, the parents' contents are all removed so
it is not that interesting to show all of them, but the fact it
was removed when all parents had it *is* unusual. When we add a
file, similarly the fact it was added when no parent wanted it
*is* unusual, and in addition the result matters, so show it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This replaces a lot of code that used the result from several 2-way
diffs to generate a combined diff for a merge. Now we just use
git-diff-tree --cc and colorize the output a bit, which is a lot
simpler, and has the enormous advantage that if the diff doesn't
show quite what someone thinks it should show, I can deflect the
blame to someone else. :)
Signed-off-by: Paul Mackerras <paulus@samba.org>
Apparently this simplifies things for the parser/compiler and makes
it go slightly faster (since without the braces, it potentially has
to do two levels of substitutions rather than one).
Signed-off-by: Paul Mackerras <paulus@samba.org>
When we run combined diff from working tree (diff-files --cc),
we sent NULL to printf that is returned by find_unique_abbrev().
Signed-off-by: Junio C Hamano <junkio@cox.net>
We still talked about HEAD symlinks but these days we use
symrefs by default.
Also 'failed/prevented' message is now gone from the merge
output.
Signed-off-by: Junio C Hamano <junkio@cox.net>
These flags ask diff with a specific unmerged stage, so it
should fall back on -p instead. Also when -c is given, we
should not do --cc.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/daemon:
daemon: extend user-relative path notation.
daemon: Set SO_REUSEADDR on listening sockets.
daemon: do not forbid user relative paths unconditionally under --base-path
* mw/http:
http-fetch: Tidy control flow in process_alternate_response
http: Turn on verbose Curl messages if GIT_CURL_VERBOSE set in environment
http-fetch: Fix message reporting rename of object file.
http-fetch: Fix object list corruption in fill_active_slots().
git-diff-tree --stdin ignored second and subsequent parents when
fed git-rev-list --parents output. Update diff_tree_commit()
function to take a commit object, and pass a fabricated commit
object after grafting the fake parents from diff_tree_stdin().
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier we had a workaround to avoid misspelled revision name to
be taken as a filename when "--no-revs --no-flags" are in
effect. This cleans up the logic.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also reorganizes the man page to list options alphabetically.
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier, we made --base-path to automatically forbid
user-relative paths, which was probably a mistake. This
introduces --user-path (or --user-path=path) option to control
the use of user-relative paths independently. The latter form
of the option can be used to restrict accesses to a part of each
user's home directory, similar to "public_html" some webservers
supports.
If we're invoked with --user-path=FOO option, then a URL of the
form git://~USER/PATH/... resolves to the path HOME/FOO/PATH/...,
where HOME is USER's home directory.
[jc: This is much reworked by me so bugs are mine, but the
original patch was done by Mark Wooding.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without this, you can silently lose the ability to receive IPv4
connections if you stop and restart the daemon.
[jc: tweaked code organization a bit and made this controllable
from a command line option.]
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Using base-path to relocate the server public space does not
have anything to do with allowing or forbidding user relative
paths.
Signed-off-by: Junio C Hamano <junkio@cox.net>
move_temp_to_file returns 0 or -1. This is not a good thing to pass to
strerror(3). Fortunately, someone already reported the error, so don't
worry too much.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In fill_active_slots() -- if we find an object which has already arrived,
say as part of a pack, /don't/ remove it from the list. It's already been
prefetched and someone will ask for it later. Just label it as done and
carry blithely on. (As it was, the code would dereference a freed object
to continue through the list anyway.)
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is essentially 'git whatchanged -n1 --always --cc "$@"'.
Just like whatchanged takes default flags from
whatchanged.difftree configuration, this uses show.difftree
configuration.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jon Loeliger