Placing the contrib hooks into /usr/share/doc/ wasn't a good idea in the
first place. According to the Debian policy they should be located in
/usr/share/git-core/, so let's put them there.
Thanks to Bill Allombert for reporting this through
http://bugs.debian.org/640949
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perforce does not strictly require the usage of branch specifications to create
branches. In these cases the branch detection code of git-p4 will not be able to
import them.
This patch adds support for git-p4.branchList configuration option, allowing
branches to be defined in git config.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All branches in the Perforce server are downloaded to allow branch detection. If
you have a centralized server on a remote location and there is a big number of
branches this operation can take some time.
This patch adds the configuration option git-p4.branchUser to allow filtering
the branch list by user. Although this limits the branch maintenance in Perforce
to be done by a single user, it might be an advantage when the number of
branches being used in a specific depot is very small when compared with the
branches available in the server.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When branch detection is enabled each branch is named in git after their
relative depot path in Perforce. To do this the depot paths are compared against
each other to find their common base path. The current algorithm makes this
comparison on a character by character basis.
Assuming we have the following branches:
//depot/branches/featureA
//depot/branches/featureB
Then the base depot path would be //depot/branches/feature, which is an invalid
depot path.
The current patch fixes this by splitting the path into a list and comparing the
list entries, making it choose correctly //depot/branches as the base path.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Copy and rename detection arguments (-C and -M) allow setting a threshold value
for the similarity ratio. If the similarity is below this threshold the rename
or copy is ignored and the file is added as new.
This patch allows setting git-p4.detectRenames and git-p4.detectCopies options
to an integer value to set the respective threshold.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easy to customize the git diff-tree options, for example
to include -p to include inline diffs.
It defaults to the current options "--stat --summary --find-copies-harder"
and thus is backward-compatible.
Signed-off-by: Jon Jensen <jon@endpoint.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When importing a repo, the time on the initial commit had been
just "now". But this causes problems when trying to share among
git-p4 repos that were created identically, although at different
times. Instead, use the time in the top-most p4 change as the
time for the git import commit.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the namespace mechanism in a new gitnamespaces(7) page.
Reference it from receive-pack and upload-pack.
Document the new --namespace option and GIT_NAMESPACE environment
variable in git(1), and reference gitnamespaces(7).
Add a sample Apache configuration to http-backend(1) to support
namespaced repositories, and reference gitnamespaces(7).
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS sections of most commands that span several lines already
use [verse] to retain line breaks. Most commands that don't span
several lines seem not to use [verse]. In the HTML output, [verse]
does not only preserve line breaks, but also makes the section
indented, which causes a slight inconsistency between commands that
use [verse] and those that don't. Use [verse] in all SYNOPSIS sections
for consistency.
Also remove the blank lines from git-fetch.txt and git-rebase.txt to
align with the other man pages. In the case of git-rebase.txt, which
already uses [verse], the blank line makes the [verse] not apply to
the last line, so removing the blank line also makes the formatting
within the document more consistent.
While at it, add single quotes to 'git cvsimport' for consistency with
other commands.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for dividing the refs of a single repository into multiple
namespaces, each of which can have its own branches, tags, and HEAD.
Git can expose each namespace as an independent repository to pull from
and push to, while sharing the object store, and exposing all the refs
to operations such as git-gc.
Storing multiple repositories as namespaces of a single repository
avoids storing duplicate copies of the same objects, such as when
storing multiple branches of the same source. The alternates mechanism
provides similar support for avoiding duplicates, but alternates do not
prevent duplication between new objects added to the repositories
without ongoing maintenance, while namespaces do.
To specify a namespace, set the GIT_NAMESPACE environment variable to
the namespace. For each ref namespace, git stores the corresponding
refs in a directory under refs/namespaces/. For example,
GIT_NAMESPACE=foo will store refs under refs/namespaces/foo/. You can
also specify namespaces via the --namespace option to git.
Note that namespaces which include a / will expand to a hierarchy of
namespaces; for example, GIT_NAMESPACE=foo/bar will store refs under
refs/namespaces/foo/refs/namespaces/bar/. This makes paths in
GIT_NAMESPACE behave hierarchically, so that cloning with
GIT_NAMESPACE=foo/bar produces the same result as cloning with
GIT_NAMESPACE=foo and cloning from that repo with GIT_NAMESPACE=bar. It
also avoids ambiguity with strange namespace paths such as
foo/refs/heads/, which could otherwise generate directory/file conflicts
within the refs directory.
Add the infrastructure for ref namespaces: handle the GIT_NAMESPACE
environment variable and --namespace option, and support iterating over
refs in a namespace.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The core.abbrevguard config variable had removed and
now core.abbrev has been used instead. Teach it.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the git commits you are submitting contain changes made by
other people, the authorship will not be retained. Change git-p4
to warn of this and to note that --preserve-user can be used
to solve the problem (if you have suitable permissions).
The warning can be disabled.
Add a test case and update documentation.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The zsh support of git-completion script in contrib/ is broken for current
versions of zsh, and does not notice when there's a subcommand.
For example: "git log origi<TAB>" gives no completions because it would
try to find a "git origi..." command. This will be fixed by zsh 4.3.12,
but for now we can workaround it by backporting the same fix as zsh folks
implemented.
The problem started after commit v1.7.4-rc0~11^2~2 (bash: get
--pretty=m<tab> completion to work with bash v4), which introduced
_get_comp_words_by_ref() that comes from bash-completion[1] scripts, and
relies on the 'words' variable.
However, it turns out 'words' is a special variable used by zsh
completion. From zshcompwid(1):
[...] the parameters are reset on each function exit (including nested
function calls from within the completion widget) to the values they had
when the function was entered.
As a result, subcommand words are lost. Ouch.
This is now fixed in the latest master branch of zsh[2] by simply defining
'words' as hidden (typeset -h), which removes the special meaning inside
the emulated bash function. So let's do the same.
Jonathan Nieder helped on the commit message.
[1] http://bash-completion.alioth.debian.org/
[2] http://zsh.git.sourceforge.net/git/gitweb.cgi?p=zsh/zsh;a=commitdiff;h=e880604f029088f32fb1ecc39213d720ae526aaa
Reported-by: Stefan Haller <lists@haller-berlin.de>
Comments-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches git-grep the --perl-regexp/-P options (naming
borrowed from GNU grep) in order to allow specifying PCRE regexes on the
command line.
PCRE has a number of features which make them more handy to use than
POSIX regexes, like consistent escaping rules, extended character
classes, ungreedy matching etc.
git isn't build with PCRE support automatically. USE_LIBPCRE environment
variable must be enabled (like `make USE_LIBPCRE=YesPlease`).
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
. Slightly more paranoid checking of results from 'p4 change'
. Remove superfluous "-G"
. Don't modify the username if it is unchanged.
. Add a comment in the change template to show what is
going to be done.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-By: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most zsh users probably probably do not expect a custom shopt function
to enter their environment just because they ran "source
~/.git-completion.sh".
Such namespace pollution makes development of other scripts confusing
(because it makes the bash-specific shopt utility seem to be available
in zsh) and makes git's tab completion script brittle (since any other
shell snippet implementing some other subset of shopt will break it).
Rename the shopt shim to the more innocuous __git_shopt to be a good
citizen (with two underscores to avoid confusion with completion rules
for a hypothetical "git shopt" command).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-n" option of "git grep" gained a synonym "--line-number" with
commit 7d6cb10b ("grep: Add the option '--line-number'", 2011-03-28).
Teach bash-completion about it.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "_get_comp_words_by_ref -n := words" command from the
bash_completion library reassembles a modified version of COMP_WORDS
with ':' and '=' no longer treated as word separators and stores it in
the ${words[@]} array. Git's programmable tab completion script uses
this to abstract away the difference between bash v3's and bash v4's
definitions of COMP_WORDS (bash v3 used shell words, while bash v4
breaks at separator characters); see v1.7.4-rc0~11^2~2 (bash: get
--pretty=m<tab> completion to work with bash v4, 2010-12-02).
zsh has (or rather its completion functions have) another idea about
what ${words[@]} should contain: the array is prepopulated with the
words from the command it is completing. For reasons that are not
well understood, when git-completion.bash reserves its own "words"
variable with "local words", the variable becomes empty and cannot be
changed from then on. So the completion script neglects the arguments
it has seen, and words complete like git subcommand names. For
example, typing "git log origi<TAB>" gives no completions because
there are no "git origi..." commands.
However, when this words variable is not declared as local but is just
populated by _get_comp_words_by_ref() and then read in various
completion functions, then zsh seems to be happy about it and our
completion script works as expected.
So, to get our completion script working again under zsh and to
prevent the words variable from leaking into the shell environment
under bash, we will only declare words as local when using bash.
Reported-by: Stefan Haller <lists@haller-berlin.de>
Suggested-by: Felipe Contreras <felipe.contreras@gmail.com>
Explained-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In v1.7.4-rc0~11^2~2 (bash: get --pretty=m<tab> completion to work
with bash v4, 2010-12-02) we started to use _get_comp_words_by_ref()
to access completion-related variables. That was large change, and to
make it easily reviewable, we invoked _get_comp_words_by_ref() in each
completion function and systematically replaced every occurance of
bash's completion-related variables ($COMP_WORDS and $COMP_CWORD) with
variables set by _get_comp_words_by_ref().
This has the downside that _get_comp_words_by_ref() is invoked several
times during a single completion. The worst offender is perhaps 'git
log mas<TAB>': during the completion of 'master'
_get_comp_words_by_ref() is invoked no less than six times.
However, the variables $prev, $cword, and $words provided by
_get_comp_words_by_ref() are not modified in any of the completion
functions, and the previous commit ensures that the $cur variable is
not modified as well. This makes it possible to invoke
_get_comp_words_by_ref() to get those variables only once in our
toplevel completion functions _git() and _gitk(), and all other
completion functions will inherit them.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.4-rc0~11^2~2 (bash: get --pretty=m<tab> completion to work
with bash v4, 2010-12-02) we use _get_comp_words_by_ref() to access
completion-related variables, and the $cur variable holds the word
containing the current cursor position in all completion functions.
This $cur variable is left unchanged in most completion functions;
there are only four functions modifying its value, namely __gitcomp(),
__git_complete_revlist_file(), __git_complete_remote_or_refspec(), and
_git_config().
If this variable were never modified, then it would allow us a nice
optimisation and cleanup. Therefore, this patch assigns $cur to an
other local variable and uses that for later modifications in those
four functions.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If bashcompinit has not already been autoloaded, do so
automatically, as it is required to properly parse the
git-completion file with ZSH.
Helped-by: Felipe Contreras
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patches from git passed into p4 end up with the committer being identified
as the person who ran git-p4.
With "submit --preserve-user", git-p4 modifies the p4 changelist (after it
has been submitted), setting the p4 author field.
The submitter is required to have sufficient p4 permissions or git-p4
refuses to proceed. If the git author is not known to p4, the submit will
be abandoned unless git-p4.allowMissingP4Users is true.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that the majority of git-p4 uses spaces, not tabs, for indentation.
Consistent indentation is a good hygiene for Python scripts, and mixing
tabs and spaces in Python can lead to hard-to-find bugs.
Signed-off-by: Andrew Garber <andrew@andrewgarber.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If font-lock is disabled, font-lock-compile-keywords complains.
Really what we want to do is to replace log-edit's font-lock
definitions with our own, so define a major mode deriving from
log-edit and set up font-lock-defaults there. We then use the
optional MODE argument to log-edit to set up the major mode of the
commit buffer appropriately.
Signed-off-by: Lawrence Mitchell <wence@gmx.li>
Acked-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script does not have to be run under bash, but any POSIX compliant
shell would do, as it does not use any bash-isms.
It may be written under a different style than what is recommended in
Documentation/CodingGuidelines, but that is a different matter.
While at it, fix obvious typos in the comment.
Signed-off-by: Maxin B. John <maxin@maxinbjohn.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also adds test for "--merges" and "--no-merges" which we did not
have so far.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable bash completion for "git help <alias>", analogous to "git
<alias>", which was already implemented.
Signed-off-by: Jakob Pfender <jpfender@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e32e00d (git-p4: better message for "git-p4 sync" when not
cloned, 2011-02-19) broke another use case, that of using
"git-p4 sync" to import a new branch into an existing repository.
Refine the fix again, on top of the fix in ac34efc.
Reported-by: Michael Horowitz <michael.horowitz@ieee.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Tested-by: Michael Horowitz <michael.horowitz@ieee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is an error message that crashes the script because of an invalid ref
to the non-existing "path" variable. It is almost never printed, which
would explain why nobody encountered this problem before... But anyway,
this oneliner fixes it.
Signed-off-by: Tor Arvid Lund <torarvid@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When files are added to perforce, the path to that file has whichever case
configuration that exists on the machine of the user who added the file.
What does that mean? It means that when Alice adds a file
//depot/DirA/FileA.txt
... and Bob adds:
//depot/dirA/FileB.txt
... we may or may not get a problem. If a user sets the config variable
git-p4.ignorecase to "true", we will consider //depot/DirA and //depot/dirA
to be the same directory.
Signed-off-by: Tor Arvid Lund <torarvid@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, it is possible to call the gitConfig method with an optional
argument string, which will be passed to the "git config" executable. For
instance:
gitConfig("core.ignorecase", "--bool")
will ensure that you get the value "true", and won't have to check the returned
value for [1, true, on, yes].
Signed-off-by: Tor Arvid Lund <torarvid@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e32e00d (git-p4: better message for "git-p4 sync" when not cloned,
2011-02-19) broke the use of the "@all" revision specifier, e.g.,
git-p4 clone //depot/xxx@all
Fix it as per Tor Arvid's quick patch.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Reported-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Based-on-patch-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While doing a final sanity check before merging a topic Bsomething, it
is a good idea to review what damage Bsomething branch would make, by
running:
$ git diff ...Bsomething
Unfortunately, our completion script for 'git diff' doesn't offer
anything after '...'. This is because 'git diff's completion function
invokes __git_complete_file() for non-option arguments to complete the
'<tree>:<path>' extended SHA-1 notation, but this helper function
doesn't support refs after '...' or '..'. Completion of refs after
'...' or '..' is supported by the __git_complete_revlist() helper
function, but that doesn't support '<tree>:<path>'.
To support both '...<ref>' and '<tree>:<path>' notations for 'git
diff', this patch, instead of adding yet another helper function,
joins __git_complete_file() and __git_complete_revlist() into the new
common function __git_complete_revlist_file(). The old helper
functions __git_complete_file() and __git_complete_revlist() are
changed to be a direct wrapper around the new
__git_complete_revlist_file(), because they might be used in
user-supplied completion scripts and we don't want to break them.
This change will cause some wrong suggestions for other commands which
use __git_complete_file() ('git diff' and friends) or
__git_complete_revlist() ('git log' and friends), e.g. 'git diff
...master:Doc<TAB>' and 'git log master:Doc<TAB>' will complete the
path to 'Documentation/', although neither commands make any sense.
However, both of these were actively wrong to begin with as soon as
the user entered the ':', so there is no real harm done.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an attempt to overwrite the 'Description:' section of the p4 change
log to include the git commit messages, it also overwrote the 'Jobs:'
section. Â This fix restores the 'Job:' section.
Signed-off-by: Michael Horowitz <michael.horowitz@ieee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the git prompt (when enabled) show a CHERRY-PICKING indicator
when we are in the middle of a conflicted cherry-pick, analogous
to the existing MERGING and BISECTING flags.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new config options:
git-p4.detectCopies - Enable copy detection.
git-p4.detectCopiesHarder - Find copies harder.
The detectCopies option should be set to a true/false value.
The detectCopiesHarder option should be set to true/false value.
P4Submit can now process diff-tree C status and integrate files accordingly.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Acked-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only open files for edit after integrating if the SHA1 of source and destination
differ from each other.
Add git config option detectRenames to allow permanent rename detection. This
options should be set to a true/false value.
Rename "detectRename" variable to "detectRenames" to make it more coherent with
the description in git man pages, which always use plural.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Acked-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like git clone --bare, build a .git directory but no
checked out files.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-By: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are four wildcard characters in p4. Files with these
characters can be added to p4 repos using the "-f" option.
They are stored in %xx notation, and when checked out, p4
converts them back to normal.
This patch does the same thing when importing into git,
converting the four special characters. Without this change,
the files appear with literal %xx in their names.
Be careful not to produce "*" in filenames on windows. That
will fail.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common error is to do "git-p4 sync" in a repository that
was not initialized by "git-p4 clone". There will be no
p4 refs. The error message in this case is a traceback
for an assertion, which is confusing.
Change it instead to explain the likely problem.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-By: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Error output will look like this:
glom$ git p4 clone //deopt
Importing from //deopt into .
Reinitialized existing Git repository in /tmp/x/.git/
Doing initial import of //deopt from revision #head into refs/remotes/p4/master
p4 returned an error: //deopt/... - must refer to client glom.
This particular p4 error is misleading.
Perhaps the depot path was misspelled.
Depot path: //deopt
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
562d53f (git-p4: Fix sync errors due to new server version, 2010-01-21)
taught git-p4 sync to recognize the new move/delete type, but this type
can also show up in an initial clone and labels output.
Instead of replicating the support in three places, hoist the definition
somewhere global.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-By: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some p4 failures result in an error, but the info['code'] is not
set. These include a bad p4 executable, or a core dump from p4,
and other odd internal errors where p4 fails to generate proper
marshaled output.
Make sure the info key exists before using it to avoid a python
traceback.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gerrit Pape