We have several callers like
if (active_cache_changed && write_locked_index(...))
handle_error();
rollback_lock_file(...);
where the final rollback is needed because "!active_cache_changed"
shortcuts the if-expression. There are also a few variants of this,
including some if-else constructs that make it more clear when the
explicit rollback is really needed.
Teach `write_locked_index()` to take a new flag SKIP_IF_UNCHANGED and
simplify the callers. Leave the most complicated of the callers (in
builtin/update-index.c) unchanged. Rewriting it to use this new flag
would end up duplicating logic.
We could have made the new flag behave the other way round
("FORCE_WRITE"), but that could break existing users behind their backs.
Let's take the more conservative approach. We can still migrate existing
callers to use our new flag. Later we might even be able to flip the
default, possibly without entirely ignoring the risk to in-flight or
out-of-tree topics.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 8cbd431082 ("git-add--interactive: replace hunk
recounting with apply --recount", 2008-7-2) if a hunk is skipped then
we rely on the context lines to apply subsequent hunks in the right
place. While this works most of the time it is possible for hunks to
end up being applied in the wrong place. To fix this adjust the offset
of subsequent hunks to correct for any change in the number of
insertions or deletions due to the skipped hunk. The change in offset
due to edited hunks that have the number of insertions or deletions
changed is ignored here, it will be fixed in the next commit.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a hunk is skipped by add -i the offsets of subsequent hunks are
not adjusted to account for any missing insertions due to the skipped
hunk. Most of the time this does not matter as apply uses the context
lines to apply the subsequent hunks in the correct place, however in
pathological cases the context lines will match at the now incorrect
offset and the hunk will be applied in the wrong place. The offsets of
hunks following an edited hunk that has had the number of insertions
or deletions changed also need to be updated in the same way. Add
failing tests to demonstrate this.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a filter when comparing diffs to fix the value of non-zero hashes
in diff index lines so we're not hard coding sha1 hash values in the
expected output. This makes it easier to change the expected output if
a test is edited as we don't need to worry about the exact hash value
and means the tests will work when the hash algorithm is transitioned
away from sha1.
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the behavior of git-commit back to what it was back in
d4bb43ee27 ("Invoke "git gc --auto" from commit, merge, am and
rebase.", 2007-09-05) when it was git-commit.sh.
Shortly afterwards in f5bbc3225c ("Port git commit to C.", 2007-11-08)
when it was ported to C, the "git gc --auto" invocation went away.
Since that unintended regression, git gc --auto only ran for git-am,
git-merge, git-fetch, and git-receive-pack. It was possible to
write a script that would "git commit" a lot of data locally, and gc
would never run.
One such repository that was locally committing generated zone file
changes had grown to a size of ~60GB before a daily cronjob was added
to "git gc", bringing it down to less than 1GB. This will make such
cases work without intervention.
I think fixing such pathological cases where the repository will grow
forever is a worthwhile trade-off for spending a couple of
milliseconds calling "git gc --auto" (in the common cases where it
doesn't do anything).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Desktops and servers tend to have no power sensor, thus on_ac_power returns
255 ("unknown"). Thus, let's take any answer other than 1 ("battery") as
no contraindication to run gc.
If that tool returns "unknown", there's no point in querying other sources
as it already queried them, and is smarter than us (can handle multiple
adapters).
Reported by: Xin Li <delphij@google.com>
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push" over http transport did not unquote the push-options
correctly.
* jk/push-options-via-transport-fix:
remote-curl: unquote incoming push-options
t5545: factor out http repository setup
Hotfix for a recent topic.
* tg/worktree-create-tracking:
git-worktree.txt: fix indentation of example and text of 'add' command
git-worktree.txt: fix missing ")" typo
Many places in "git apply" knew that "/dev/null" that signals
"there is no such file on this side of the diff" can be followed by
whitespace and garbage when parsing a patch, except for one, which
made an otherwise valid patch (e.g. ones from subversion) rejected.
* tk/apply-dev-null-verify-name-fix:
apply: handle Subversion diffs with /dev/null gracefully
apply: demonstrate a problem applying svn diffs
"git worktree add" learned to run the post-checkout hook, just like
"git clone" runs it upon the initial checkout.
* es/worktree-add-post-checkout-hook:
worktree: add: fix 'post-checkout' not knowing new worktree location
"git am" has learned the "--quit" option, in addition to the existing
"--abort" option; having the pair mirrors a few other commands like
"rebase" and "cherry-pick".
* nd/am-quit:
am: support --quit
GIT_DISABLE_UNTRACKED_CACHE and GIT_TEST_UNTRACKED_CACHE are only
sensed for their presense by using getenv(); use git_env_bool()
instead so that GIT_DISABLE_UNTRACKED_CACHE=false would work as
naïvely expected.
Also rename GIT_TEST_UNTRACKED_CACHE to GIT_FORCE_UNTRACKED_CACHE
to express what it does more honestly. Forcing its use may be one
useful thing to do while testing the feature, but testing does not
have to be the only use of the knob.
While at it, avoid repeated calls to git_env_bool() by capturing the
return value from the first call in a static variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the test suite runs successfully with '-x' tracing even with
/bin/sh, enable it on Travis CI in order to
- get more information about test failures, and
- catch constructs breaking '-x' with /bin/sh sneaking into our test
suite.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explain in 't/README' why it is a bad idea to redirect and verify the
stderr of compound commands, in the hope that future contributions
will follow this advice and the test suite will keep working with '-x'
tracing and /bin/sh.
While at it, since we can now run the test suite with '-x' without
needing a Bash version supporting BASH_XTRACEFD, remove the now
outdated caution note about non-Bash shells from the description of
the '-x' option.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
't1510-repo-setup.sh' checks the stderr of nested function calls way
too many times, resulting in several failures when using '-x' tracing,
unless it's executed with a Bash version supporting BASH_XTRACEFD.
Maybe someday we will clear up this test script, but until then mark
it as 'test_untraceable'.
After this change
make GIT_TEST_OPTS='-x --verbose-log' test
finally fully passes without setting TEST_SHELL_PATH to Bash.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test in 't9903-bash-prompt.sh' fails when the test script is run
with '-x' tracing and a Bash version not yet supporting BASH_XTRACEFD,
notably the default Bash version shipped in OSX. The reason for the
failure is that the test checks the emptiness of __git_ps1()'s stderr,
which includes the trace of all commands executed within __git_ps1()
as well, throwing off the emptiness check.
Having only a single test checking the empty stderr doesn't bring us
much when none of the other tests do so, so remove this test for now.
After this change t9903 passes with '-x', even when running with a
Bash version not yet supporing BASH_XTRACEFD.
In the future we might want to consider checking the emptiness of
__git_ps1()'s stderr in each and every test, in which case we'd have
to mark this test script as 'test_untraceable', but that's a different
topic.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test 'no-op fetch without "-v" is quiet' in 't5570-git-daemon.sh'
fails when the test script is run with '-x' tracing (and using a shell
other than a Bash version supporting BASH_XTRACEFD). The reason for
the failure is that the test checks the emptiness of a subshell's
stderr, which includes the trace of commands executed in that subshell
as well, throwing off the emptiness check.
Save the stderr of 'git fetch' only instead of the whole subshell's, so
it remains free from tracing output.
After this change t5570 passes with '-x', even when running with
/bin/sh.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test 'fetch --recurse-submodules -j2 has the same output
behaviour' in 't5526-fetch-submodules.sh' fails when the test script
is run with '-x' tracing (and using a shell other than a Bash version
supporting BASH_XTRACEFD). The reason of that failure is the
following command:
GIT_TRACE=$(pwd)/../trace.out git fetch <...> 2>../actual.err
because the trace of executing 'pwd' in the command substitution ends
up in 'actual.err' as well, throwing off the subsequent
'test_i18ncmp'.
Use $TRASH_DIRECTORY to specify the path of the GIT_TRACE log file
instead of $(pwd), so the command's stderr remains free from tracing
output.
After this change t5526 passes with '-x', even when running with
/bin/sh.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Three "missing reference" tests in 't5500-fetch-pack.sh' fail when the
test script is run with '-x' tracing (and using a shell other than a
Bash version supporting BASH_XTRACEFD). The reason for those failures
is that the tests check a subshell's stderr, which includes the trace
of executing commands in that subshell as well, throwing off the
comparison with the expected output.
Save the stderr of 'git fetch-pack' only instead of the whole
subshell, so it remains free from tracing output.
After this change t5500 passes with '-x', even when running with
/bin/sh.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The two test checking 'git mmerge-recursive' in an empty worktree in
't3030-merge-recursive.sh' fail when the test script is run with '-x'
tracing (and using a shell other than a Bash version supporting
BASH_XTRACEFD). The reason for those failures is that the tests check
the emptiness of a subshell's stderr, which includes the trace of
commands executed in that subshell as well, throwing off the emptiness
check.
Note that both subshells execute four git commands each, meaning that
checking the emptiness of the whole subshell implicitly ensures that
not only 'git merge-recursive' but none of the other three commands
outputs anything to their stderr. Note also that if one of those
commands were to output anything on its stderr, then the current
combined check would not tell us which one of those four commands the
unexpected output came from.
Save the stderr of those four commands only instead of the whole
subshell, so it remains free from tracing output, and save and check
them individually, so they will show us from which command the
unexpected output came from.
After this change t3030 passes with '-x', even when running with
/bin/sh.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If `commit_lock_file()` or `hold_lock_file_for_update()` fail, there is
no need to call `rollback_lock_file()` on the lockfile. It doesn't hurt
either, but it does make different callers in this file inconsistent,
which might be confusing.
While at it, remove a trailing '.' from a recurring error message.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function originated in builtin/merge.c. It was moved to merge.c in
commit db699a8a1f (Move try_merge_command and checkout_fast_forward to
libgit.a, 2012-10-26), but was used from sequencer.c even before that.
If a problem occurs, the function returns without rolling back the
lockfile. Teach it to do so.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we return early, or if `active_cache_changed` is false, we forget to
roll back the lockfile.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 2071e05ed2 ("t5536: new test of refspec conflicts when
fetching", 2013-10-30), introduced the verify_stderr() function
which was used to verify that certain fatal/warning messages were
issued by a given git command. In addition, verify_stderr() would
filter a specific "fatal: The remote end hung up unexpectedly"
message, which may, or may not, be present (depending on the
relative timing of the git-fetch and git-upload-pack processes).
The verify_stderr() function has seen several modifications, which
has introduced a couple of minor problems. For example, commit
1edbaac3bb ("tests: use test_i18n* functions to suppress false
positives", 2016-06-17) introduced an inappropriate test_i18ngrep
call and commit f096e6e826 ("fetch: improve the error messages
emitted for conflicting refspecs", 2013-10-30) included an
ineffective invocation of sort at the end of a grep pipeline.
Instead of fixing these minor problems in verify_stderr(), we take
the simpler approach of directly searching the error file, using
test_i18ngrep, for the specific message(s) we expect. (The only
minor downside is that we would not notice any new messages).
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain information is currently shown with --summary, but when used
in combination with --stat it's a bit hard to read since info of the
same file is in two places (--stat and --summary).
On top of that, commits that add or remove files double the number of
display lines, which could be a lot if you add or remove a lot of
files.
--compact-summary embeds most of --summary back in --stat in the
little space between the file name part and the graph line, e.g. with
commit 0433d533f1:
Documentation/merge-config.txt | 4 +
builtin/merge.c | 2 +
...-pull-verify-signatures.sh (new +x) | 81 ++++++++++++++
t/t7612-merge-verify-signatures.sh | 45 ++++++++
4 files changed, 132 insertions(+)
It helps both condensing information and saving some text
space. What's new in diffstat is:
- A new 0644 file is shown as (new)
- A new 0755 file is shown as (new +x)
- A new symlink is shown as (new +l)
- A deleted file is shown as (gone)
- A mode change adding executable bit is shown as (mode +x)
- A mode change removing it is shown as (mode -x)
Note that --compact-summary does not contain all the information
--summary provides. Rewrite percentage is not shown but it could be
added later, like R50% or C20%.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In mark_parents_uninteresting(), we check for the existence of an
object file to see if we should treat a commit as parsed. The result
is to set the "parsed" bit on the commit.
Modify the condition to only check has_object_file() if the result
would change the parsed bit.
When a local branch is different from its upstream ref, "git status"
will compute ahead/behind counts. This uses paint_down_to_common()
and hits mark_parents_uninteresting(). On a copy of the Linux repo
with a local instance of "master" behind the remote branch
"origin/master" by ~60,000 commits, we find the performance of
"git status" went from 1.42 seconds to 1.32 seconds, for a relative
difference of -7.0%.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9ba95ed23c (perf/run: update get_var_from_env_or_config() for
subsections) stopped setting a default value for GIT_PERF_REPEAT_COUNT
if no perf config file is present, because get_var_from_env_or_config
returns early in that case.
Fix it by setting the default value after calling this function. Its
fifth parameter is not used for any other variable, so remove the
associated code.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend Git.pm to load the "warnings" pragma like the rest of the code
in perl/ in addition to the existing "strict" pragma. This is
considered the bare minimum best practice in Perl.
Ever since this code was introduced in b1edc53d06 ("Introduce
Git.pm (v4)", 2006-06-24) it's only been using "strict", not
"warnings".
This leaves contrib/buildsystems/Generators/{QMake,VCproj}.pm and
contrib/mw-to-git/Git/Mediawiki.pm without "use warnings". Amending
those would be a sensible follow-up change, but I don't have an easy
way to test those so I'm not changing them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In Perl the "use strict/warnings" pragmas are lexical, thus there's no
reason to do:
package Foo;
use strict;
package Bar;
use strict;
$x = 5;
To satisfy the desire that the undeclared $x variable will be spotted
at compile-time. It's enough to include the first "use strict".
This functionally changes nothing, but makes a subsequent change where
"use warnings" will be added to Git.pm less confusing and less
verbose, since as with "strict" we'll only need to do that at the top
of the file.
Changes code initially added in a6065b548f ("Git.pm: Try to support
ActiveState output pipe", 2006-06-25).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git::Mail::Address file added in bd869f67b9 ("send-email: add and
use a local copy of Mail::Address", 2018-01-05) had the executable bit
set. That bit should not be set for *.pm files. It breaks nothing but
it is redundant and confusing as none of the other files have it and
these files are never executed as stand-alone programs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we return early, we forget to roll back the lockfile. Do so.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After 076aa2cbd (tempfile: auto-allocate tempfiles on heap, 2017-09-05),
we can have lockfiles on the stack.
One of these functions fails to always roll back the lock. That will be
fixed in the next commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During abbreviation checks, we navigate to the position within a
pack-index that an OID would be inserted and check surrounding OIDs
for the maximum matching prefix. This position may be beyond the
last position, because the given OID is lexicographically larger
than every OID in the pack. Then nth_packed_object_oid() does not
initialize "oid".
Use the return value of nth_packed_object_oid() to prevent these
errors.
Also the comment about checking near-by objects miscounts the
neighbours. If we have a hit at "first", we check "first-1" and
"first+1" to make sure we have sufficiently long abbreviation not to
match either. If we do not have a hit, "first" is the smallest
among the objects that are larger than what we want to name, so we
check that and "first-1" to make sure we have sufficiently long
abbreviation not to match either. In either case, we only check up
to two near-by objects.
Reported-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove erroneous space between % and < in '% <(<N>)'.
Signed-off-by: Mårten Kongstad <marten.kongstad@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The helper function test_must_be_empty is meant to make sure the
given file is empty, but its implementation is:
if test -s "$1"
then
... not empty, we detected a failure ...
fi
Surely, the file having non-zero size is a sign that the condition
"the file must be empty" is violated, but it misses the case where
the file does not even exist. It is an accident waiting to happen
with a buggy test like this:
git frotz 2>error-message &&
test_must_be_empty errro-message
that won't get caught until you deliberately break 'git frotz' and
notice why the test does not fail.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Three tests in 't1507-rev-parse-upstream.sh' fail when the test script
is run with '-x' tracing (and using a shell other than a Bash version
supporting BASH_XTRACEFD). The reason for those failures is that the
tests check the stderr of the function 'error_message', which includes
the trace of commands executed in that function as well, throwing off
the comparison with the expected output.
Save stderr of 'git rev-parse' only instead of the whole function, so
it remains free from tracing output.
After this change t1507 passes with '-x', even when running with
/bin/sh.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch resolved most of the test failures caused by
running our test suite with '-x' tracing and /bin/sh, and the
following patches in this series will resolve almost all of the
remaining failures. Unfortunately, not yet all.
Add means to disable '-x' tracing for individual test scripts by
setting the $test_untraceable variable to a non-empty value in the
test script before sourcing 'test-lib.sh'. However, since '-x'
tracing is not an issue with recent Bash versions supporting
BASH_XTRACEFD, i.e. v4.1 and later, don't disable tracing when the
test script is run with such a Bash version even when
$test_untraceable is set.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running a test script with '-x' turns on 'set -x' tracing, the output
of which is normally sent to stderr. This causes a lot of
test failures, because many tests redirect and verify the stderr
of shell functions, most frequently that of 'test_must_fail'.
These issues were worked around somewhat in d88785e424 (test-lib: set
BASH_XTRACEFD automatically, 2016-05-11), so at least we could
reliably run tests with '-x' tracing under a Bash version supporting
BASH_XTRACEFD, i.e. v4.1 and later.
Futhermore, redirecting the stderr of test helper functions like
'test_must_fail' or 'test_expect_code' is the cause of a different
issue as well. If these functions detect something unexpected, they
will write their error messages intended to the user to thier stderr.
However, if their stderr is redirected in order to save and verify the
stderr of the tested git command invoked in the function, then the
function's error messages will be redirected as well. Consequently,
those messages won't reach the user, making the test's verbose output
less useful.
This patch makes it safe to redirect and verify the stderr of those
test helper functions which are meant to run the tested command given
as argument, even when running tests with '-x' and /bin/sh. This is
achieved through a couple of file descriptor redirections:
- Duplicate stderr of the tested command executed in the test helper
function from the function's fd 7 (see next point), to ensure that
the tested command's error messages go to a different fd than the
'-x' trace of the commands executed in the function or the
function's error messages.
- Duplicate the test helper function's fd 7 from the function's
original stderr, meaning that, after taking a detour through fd 7,
the error messages of the tested command do end up on the
function's original stderr.
- Duplicate stderr of the test helper function from fd 4, i.e. the
fd connected to the test script's original stderr and the fd used
for BASH_XTRACEFD. This ensures that the '-x' trace of the
commands executed in the function
- doesn't go to the function's original stderr, so it won't mess
with callers who want to save and verify the tested command's
stderr.
- does go to the same fd independently from the shell running
the test script, be it /bin/sh, an older Bash without
BASH_XTRACEFD, or a more recent Bash already supporting
BASH_XTRACEFD.
Furthermore, this also makes sure that the function's error
messages go to this fd 4, meaning that the user will be able to
see them even if the function's stderr is redirected in the test.
- Specify the latter two redirections above in the test helper
function's definition, so they are performed every time the
function is invoked, without the need to modify the callsites of
the function.
Perform these redirections in those test helper functions which can be
expected to have their stderr redirected, i.e. in the functions
'test_must_fail', 'test_might_fail', 'test_expect_code', 'test_env',
'nongit', 'test_terminal' and 'perl'. Note that 'test_might_fail',
'test_env', and 'nongit' are not involved in any test failures when
running tests with '-x' and /bin/sh.
The other test helper functions are left unchanged, because they
either don't run commands specified as their arguments, or redirecting
their stderr wouldn't make sense, or both.
With this change the number of failures when running the test suite
with '-x' tracing and /bin/sh goes down from 340 failed tests in 43
test scripts to 22 failed tests in 6 scripts (or 23 in 7, if the
system (OSX) uses an older Bash version without BASH_XTRACEFD to run
't9903-bash-prompt.sh').
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix for a commented-out code to adjust it to a rather old API change.
* ys/bisect-object-id-missing-conversion-fix:
bisect: debug: convert struct object to object_id
When resetting the working tree files recursively, the working tree
of submodules are now also reset to match.
* sb/submodule-update-reset-fix:
submodule: submodule_move_head omits old argument in forced case
unpack-trees: oneway_merge to update submodules
t/lib-submodule-update.sh: fix test ignoring ignored files in submodules
t/lib-submodule-update.sh: clarify test
"git commit --fixup" did not allow "-m<message>" option to be used
at the same time; allow it to annotate resulting commit with more
text.
* ab/commit-m-with-fixup:
commit: add support for --fixup <commit> -m"<extra message>"
commit doc: document that -c, -C, -F and --fixup with -m error
"git status" after moving a path in the working tree (hence making
it appear "removed") and then adding with the -N option (hence
making that appear "added") detected it as a rename, but did not
report the old and new pathnames correctly.
* nd/ita-wt-renames-in-status:
wt-status.c: handle worktree renames
wt-status.c: rename rename-related fields in wt_status_change_data
wt-status.c: catch unhandled diff status codes
wt-status.c: coding style fix
Use DIFF_DETECT_RENAME for detect_rename assignments
t2203: test status output with porcelain v2 format
Refactor the code to binary search starting from a fan-out table
(which is how the packfile is indexed with object names) into a
reusable helper.
* jt/binsearch-with-fanout:
packfile: refactor hash search with fanout table
packfile: remove GIT_DEBUG_LOOKUP log statements
Martin Ågren