The callback function was incorrectly set to update the background
colorbar when updated the selection background. This did not affect the
colors chosen or their use, just their presentation in the preferences
dialog box.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
The tabstop must be a smallish positive integer, and a spinbox is the
accepted UI control to accomplish this limiting rather than the text
entry box previously used.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
These tests check some features that git-stripspace already has
and those that it should manage well: Removing trailing spaces
from lines, removing blank lines at the beginning and end,
unifying multiple lines between paragraphs, doing the correct
when there is no newline at the last line, etc.
It seems that the implementation needs to save the whole line
in memory to be able to manage correctly long lines with
text and spaces conveniently distribuited on them.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --threaded option controls whether the In-Reply-To header will be set on
any emails sent. The current behavior is to always set this header, so this
option is most useful in its negated form, --no-threaded. This behavior can
also be controlled through the 'sendemail.threaded' config setting.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now the implementation gets more memory to store completely
each line before removing trailing spaces, and does it right
when the last line of the file ends with spaces and no newline
at the end.
Function stripspace needs again to be non-static in order to call
it from "builtin-tag.c" and the upcoming "builtin-commit.c".
A new parameter skip_comments was also added to the stripspace
function to optionally strips every shell #comment from the input,
needed for doing this task on those programs.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, if the size of refs_file at that point is ever an exact
multiple of BUFSIZ, then an EIO or ENOSPC error on the final write would
not be diagnosed.
It's not worth worrying about EPIPE here.
Although theoretically possible that someone kill this process
with a manual SIGPIPE, it's not at all likely.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I audited git for potential undetected write failures.
In the cases fixed below, the diagnostics I add mimic the diagnostics
used in surrounding code, even when that means not reporting
the precise strerror(errno) cause of the error.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-gui: Don't require a .pvcsrc to create Tools/Migrate menu hack
git-gui: Don't nice git blame on MSYS as nice is not supported
git-gui: Don't require $DISPLAY just to get --version
The Tools/Migrate menu option is a hack just for me. Yes, that's
right, git-gui has a hidden feature that really only works for me,
and the users that I support within my day-job's great firewall.
The menu option is not supported outside of that environment.
In the past we only enabled Tools/Migrate if our special local
script 'gui-miga' existed in the proper location, and if there
was a special '.pvcsrc' in the top level of the working directory.
This latter test for the '.pvcsrc' file is now failing, as the file
was removed from all Git repositories due to changes made to other
tooling within the great firewall's realm.
I have changed the test to only work on Cygwin, and only if the
special 'gui-miga' is present. This works around the configuration
changes made recently within the great firewall's realm, but really
this entire Tools/Migrate thing should be abstracted out into some
sort of plugin system so other users can extend git-gui as they need.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Sixt reported that MinGW/MSYS does not have a nice.exe to
drop the priority of a child process when it gets spawned. So we
have to avoid trying to start `git blame` through nice when we are
on Windows and do not have Cygwin available to us.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Use \n as delimiter between key and value and \0 as
delimiter after each key/value pair. This should be
easily parsable output.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option "-p" (or long "--preserve-merges") makes it possible to
rebase side branches including merges, without straightening the
history.
Example:
X
\
A---M---B
/
---o---O---P---Q
When the current HEAD is "B", "git rebase -i -p --onto Q O" will yield
X
\
---o---O---P---Q---A'---M'---B'
Note that this will
- _not_ touch X [*1*], it does
- _not_ work without the --interactive flag [*2*], it does
- _not_ guess the type of the merge, but blindly uses recursive or
whatever strategy you provided with "-s <strategy>" for all merges it
has to redo, and it does
- _not_ make use of the original merge commit via git-rerere.
*1*: only commits which reach a merge base between <upstream> and HEAD
are reapplied. The others are kept as-are.
*2*: git-rebase without --interactive is inherently patch based (at
least at the moment), and therefore merges cannot be preserved.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If your rebase succeeded, the HEAD's reflog will still show the whole
mess, but "<branchname>@{1}" now shows the state _before_ the rebase,
so that you can reset (or compare) the original and the rebased
revisions more easily.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support "--verbose" in addition to "-v", show short names in the list
comment, clean up if there is nothing to do, and add several "test_ticks"
in the test script.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Print no space after the name of a key without value.
Otherwise keys without values are printed exactly the
same as keys with empty values.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The asciidoc documentation of the --get-regexp option was
incomplete. Add some missing pieces:
- List the option in SYNOPSIS
- Mention that key names are printed
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a picture, and keep the setup and the tests together.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
RPM build broke with "File not found" error on git-gui.1 and git-citool.1
They actually are git-gui.1.gz and git-citool.1.gz
Signed-off-by: Quy Tonthat <qtonthat@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pack-file can get created without any objects in it (to transfer "no
data" - which can happen if you use a reference git repo, for example,
or just otherwise just end up transferring only branch head information
and already have all the objects themselves).
And while we probably should never create an index for such a pack, if we
do (and we do), the index file size sanity checking was incorrect.
This fixes it.
Reported-and-tested-by: Jocke Tjernlund <tjernlund@tjernlund.se>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch, the code would look for the submodule
commits in the superproject and (needlessly) fail when it
couldn't find them.
Signed-off-by: Sven Verdoolaege <skimo@liacs.nl>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://git.kernel.org/pub/scm/gitk/gitk: (21 commits)
gitk: Add a progress bar to show progress while resetting
gitk: Improve handling of whitespace and special chars in filenames
gitk: Fix bug causing nearby tags/heads to sometimes not be displayed
gitk: Limit how often we change the canvas scrolling region
gitk: Add a "reset branch to here" row context-menu operation
gitk: Get rid of the childlist variable
gitk: Speed up the reading of references
gitk: Show local uncommitted changes as a fake commit
gitk: New algorithm for drawing the graph lines
gitk: Store ids in rowrangelist and idrowranges rather than row numbers
gitk: Disable the head context menu entries for the checked-out branch
gitk: Cope with commit messages with carriage-returns and initial blank lines
gitk: Implement a simple scheduler for the compute-intensive stuff
gitk: Improve the behaviour of the initial selection
gitk: Add some more comments to the optimize_rows procedure
gitk: Don't try to list large numbers of tags or heads in the details pane
gitk: New infrastructure for working out branches & previous/next tags
[PATCH] gitk: Allow specifying tabstop as other than default 8 characters.
[PATCH] gitk: Update fontsize in patch / tree list
[PATCH] gitk: Make selection highlight color configurable
...
Conflicts:
gitk
Since git reset now gets chatty while resetting, we were getting errors
reported when a reset was done using the "reset branch to here" menu
item. With this we now read the progress messages from git reset and
update a progress bar. Because git reset outputs the progress messages
to standard error, and Tcl treats messages to standard error as error
messages, we have to invoke git reset via a shell and redirect standard
error into standard output.
This also fixes a bug in computing descendent heads when head ids
are changed via a reset.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Rounding down the printed (dis)similarity index allows us to use
"100%" as a special value that indicates complete rewrites and
fully equal file contents, respectively.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This implements a suggestion from Johannes. It uses a separate field in
struct diff_score to keep the result of the file name comparison in the
rename detection logic. This reverts the value of the similarity index
to be a function of file contents, only, and basename comparison is only
used to decide between files with equal amounts of content changes.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is trying to implement the strict IO error checks that Jim Meyering
suggested, but explicitly limits it to just regular files. If a pipe gets
closed on us, we shouldn't complain about it.
If the subcommand already returned an error, that takes precedence (and we
assume that the subcommand already printed out any relevant messages
relating to it)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should change no code at all, it just moves the definition of "struct
cmd_struct" out, and then splits out the running of the right command into
the "run_command()" function.
It also removes the long-unused 'envp' pointer passing.
This is just preparation for adding some more error checking.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't you just hate the fact sometimes, that git-rebase just applies
the patches, without any possibility to edit them, or rearrange them?
With "--interactive", git-rebase now lets you edit the list of patches,
so that you can reorder, edit and delete patches.
Such a list will typically look like this:
pick deadbee The oneline of this commit
pick fa1afe1 The oneline of the next commit
...
By replacing the command "pick" with the command "edit", you can amend
that patch and/or its commit message, and by replacing it with "squash"
you can tell rebase to fold that patch into the patch before that.
It is derived from the script sent to the list in
<Pine.LNX.4.63.0702252156190.22628@wbgn013.biozentrum.uni-wuerzburg.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the moment, only git-commit uses that code, to pick the author name,
email and date from a given commit.
This code will be reused in git rebase --interactive.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using `git push origin +foo` to forcefully overwrite the remote
branch named foo is a common idiom, especially since + is shorter
than the long option --force and can be specified on a per-branch
basis.
We now complete `git push origin +foo` just like we do the standard
`git push origin foo`. The leading + on a branch refspec does not
alter the completion.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We always quote "unusual" byte values in a pathname using
C-string style, to make it safer for parsing scripts that do not
handle NUL separated records well (or just too lazy to bother).
The absolute minimum bytes that need to be quoted for this
purpose are TAB, LF (and other control characters), double quote
and backslash.
However, we have also always quoted the bytes in high 8-bit
range; this was partly because we were lazy and partly because
we were being cautious.
This introduces an internal "quote_path_fully" variable, and
core.quotepath configuration variable to control it. When set
to false, it does not quote bytes in high 8-bit range anymore
but passes them intact.
The variable defaults to "true" to retain the traditional
behaviour for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the original $from address fails to yield a valid-looking
e-mail address, we created a bogus looking message ID, formatted
like this:
Message-Id: <11823357623688-git-send-email->
This commit fixes it by moving call to make_message_id() to
where it matters, namely, before the $message_id is needed to be
placed in the generated e-mail header; this has an important
side effect of making it clear that $from is already available.
Also throw in Sys::Hostname::hostname() just for fun, although I
suspect that the code would never trigger due to the modified
call sequence that makes sure $from is always available. This
is based on a suggestion by Michael Hendricks.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make clear in the documentation that when using --branches/-b and
--prefix with 'init', the prefix must include a trailing slash.
This matches the actual behavior of git-svn, e.g.:
$ git svn init -Ttrunk -treleases -bbranches --prefix xxx \
http://svn.sacredchao.net/svn/quodlibet/
--prefix='xxx' must have a trailing slash '/'
$
This was noticed by R. Vanicat and reported through
http://bugs.debian.org/429443
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev-parse --git-dir outputs a full path - except for the single case
of when the path would be $(pwd)/.git, in which case it outputs simply
.git. Check for this special case and handle it.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb calls Encode::decode_utf8 with two arguments,
but old versions of perl only allow this function to be called
with one argument. Even older versions of perl do not even
have an Encode module.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://repo.or.cz/git/fastimport: (260 commits)
Avoid src:dst syntax as default bash completion for git push
Make it possible to specify the HEAD for the internal findUpstreamBranchPoint function.
Added git-p4 branches command that shows the mapping of perforce depot paths to imported git branches.
Warn about conflicting p4 branch mappings and use the first one found.
Fix the branch mapping detection to be independent from the order of the "p4 branches" output.
git-p4 fails when cloning a p4 depo.
Fix initial multi-branch import.
Only use double quotes on Windows
Fix git-p4 rebase to detect the correct upstream branch instead of unconditionally
Moved the code from git-p4 submit to figure out the upstream branch point
git-p4 submit: Fix missing quotes around p4 commands to make them work with spaces in filenames
Mention remotes/p4/master also in the documentation.
Provide some information for single branch imports where the commits go
git-p4: check for existence of repo dir before trying to create
Write out the options tag in the log message of imports only if we actually have
Fix support for explicit disabling of syncing with the origin
Fix depot-paths encoding for multi-path imports (don't split up //depot/path/foo)
Fix project name guessing
Fix updating/creating remotes/p4/* heads from origin/p4/*
Fixed the check to make sure to exclude the HEAD symbolic refs when updating
...
The main thing here is better parsing of the diff --git lines in the
output of git diff-tree -p. We now cope with filenames in quotes with
special chars escaped. If the filenames contain spaces they aren't
quoted, however, which can create difficulties in parsing. We get
around the difficulties by detecting the case when the filename hasn't
changed (chop the part after "diff --git " in two and see if the halves
match apart from a/ in one and b/ in the other), and if it hasn't
changed, we just use one half. If the filename has changed we wait
for the "rename from" and "rename to" lines, which give the old and
new filenames unambiguously.
This also improves the parsing of the output of git diff-tree.
Instead of using lindex to extract the filename, we take the part from
the first tab on, and if it starts with a quote, we use [lindex $str 0]
to remove the quotes and convert the escapes.
This also gets rid of some unused tagging of the diff text, uses
[string compare] instead of [regexp] in some places, and fixes the
regexp for detecting the @@ hunk-separator lines (the regexp wasn't
accepting a single number, as in "-0,0 +1" for example).
Signed-off-by: Paul Mackerras <paulus@samba.org>
When we compute descendent heads and descendent/ancestor tags, we
cache the results. We need to be careful to invalidate the cache
when we add stuff to the graph. Also make sure that when we cache
descendent heads for a node we only cache the heads that are actually
descendents of that node.
Signed-off-by: Paul Mackerras <paulus@samba.org>
For some unknown reason, changing the scrolling region on the canvases
provokes multiple milliseconds worth of computation in the X server,
and this can end up slowing gitk down significantly. This works around
the problem by limiting the rate at which we update the scrolling region
after the first 100 rows to at most 2 per second.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This adds an entry to the menu that comes up when the user does a
right-click on a row. The new entry allows the user to reset the
currently checked-out head to the commit for the row that they did
the right-click on. The user has to select what type of reset to
do, and confirm the reset, via a dialog box that pops up.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The information in childlist is a duplicate of what's in the children
array, and it wasn't being accessed often enough to be really worth
keeping the list around as well.
Signed-off-by: Paul Mackerras <paulus@samba.org>
We were doing two execs for each tag - one to map the tag ID to a
commit ID and one to read the contents of the tag for later display.
This speeds up the process by not reading the contents of the tag
(instead it is read later if needed), and by using the -d flag to
git show-ref, which gives us refs/tags/foo^{} lines which give us
the commit ID. Also this uses string operations instead of regexps.
Signed-off-by: Paul Mackerras <paulus@samba.org>
If there are local changes in the repository, i.e., git-diff-index HEAD
produces some output, then this optionally displays an extra row in
the graph as a child of the HEAD commit (but with a red circle to
indicate that it's not a real commit). There is a checkbox in the
preferences window to control whether gitk does this or not.
Clicking on the extra row shows the diffs between the working directory
and the HEAD (using git diff-index -p). The right-click menu on the
extra row allows the user to generate a patch containing the local diffs,
or to display the diffs between the working directory and any commit.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This only draws as much of the graph lines as is visible. This can
happen by adding coordinates on to an existing graph line or by
creating a new line. This means that we only need to have laid out
and optimized as much of the graph as is actually visible in order to
draw it, including the lines (previously we didn't draw a graph
line until we had laid out and optimized to the end of a segment of
the line, i.e. down to a down-arrow or to the row where the line's
commit is displayed). This also lets us get rid of the linesegends
list, and gives us an easy workaround for the X server bug that
causes long lines to be misdrawn. This also gets rid of the use
of rowoffsets in drawlineseg et al.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Mark Levedahl