kernel/git - git - PowerEL Git System

Commit Graph

Author	SHA1	Message	Date
Jeff King	6cf378f0cb	docs: stop using asciidoc no-inline-literal In asciidoc 7, backticks like `foo` produced a typographic effect, but did not otherwise affect the syntax. In asciidoc 8, backticks introduce an "inline literal" inside which markup is not interpreted. To keep compatibility with existing documents, asciidoc 8 has a "no-inline-literal" attribute to keep the old behavior. We enabled this so that the documentation could be built on either version. It has been several years now, and asciidoc 7 is no longer in wide use. We can now decide whether or not we want inline literals on their own merits, which are: 1. The source is much easier to read when the literal contains punctuation. You can use `master~1` instead of `master{tilde}1`. 2. They are less error-prone. Because of point (1), we tend to make mistakes and forget the extra layer of quoting. This patch removes the no-inline-literal attribute from the Makefile and converts every use of backticks in the documentation to an inline literal (they must be cleaned up, or the example above would literally show "{tilde}" in the output). Problematic sites were found by grepping for '`.[{\\]' and examined and fixed manually. The results were then verified by comparing the output of "html2text" on the set of generated html pages. Doing so revealed that in addition to making the source more readable, this patch fixes several formatting bugs: - HTML rendering used the ellipsis character instead of literal "..." in code examples (like "git log A...B") - some code examples used the right-arrow character instead of '->' because they failed to quote - api-config.txt did not quote tilde, and the resulting HTML contained a bogus snippet like: <tt><sub></tt> foo <tt></sub>bar</tt> which caused some parsers to choke and omit whole sections of the page. - git-commit.txt confused ``foo`` (backticks inside a literal) with ``foo'' (matched double-quotes) - mentions of `A U Thor <author@example.com>` used to erroneously auto-generate a mailto footnote for author@example.com - the description of --word-diff=plain incorrectly showed the output as "[-removed-] and {added}", not "{+added+}". - using "prime" notation like: commit `C` and its replacement `C'` confused asciidoc into thinking that everything between the first backtick and the final apostrophe were meant to be inside matched quotes - asciidoc got confused by the escaping of some of our asterisks. In particular, `credential.\` and `credential.<url>.\*` properly escaped the asterisk in the first case, but literally passed through the backslash in the second case. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	13 years ago
René Scharfe	0f1930c587	parse-options: allow positivation of options starting, with no- Long options can be negated by adding no- right after the leading two dashes. This is useful e.g. to override options set by aliases. For options that are defined to start with no- already, this looks a bit funny. Allow such options to also be negated by removing the prefix. The following thirteen options are affected: apply --no-add bisect--helper --no-checkout checkout-index --no-create clone --no-checkout --no-hardlinks commit --no-verify --no-post-rewrite format-patch --no-binary hash-object --no-filters read-tree --no-sparse-checkout revert --no-commit show-branch --no-name update-ref --no-deref The following five are NOT affected because they are defined with PARSE_OPT_NONEG or the non-negated version is defined as well: branch --no-merged format-patch --no-stat --no-numbered update-index --no-assume-unchanged --no-skip-worktree Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>	13 years ago
René Scharfe	6acec0380b	parseopt: add OPT_NOOP_NOARG Add OPT_NOOP_NOARG, a helper macro to define deprecated options in a standard way. The help text is taken from the no-op option -r of git revert. The callback could be made to emit a (conditional?) warning later. And we could also add OPT_NOOP (requiring an argument) etc. as needed. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>	14 years ago
Junio C Hamano	b04ba2bb42	parse-options: deprecate OPT_BOOLEAN It is natural to expect that an option defined with OPT_BOOLEAN() could be used in this way: int option = -1; /* unspecified */ struct option options[] = { OPT_BOOLEAN(0, "option", &option, "set option"), OPT_END() }; parse_options(ac, av, prefix, options, usage, 0); if (option < 0) ... do the default thing ... else if (!option) ... --no-option was given ... else ... --option was given ... to easily tell three cases apart: - There is no mention of the `--option` on the command line; - The variable is positively set with `--option`; or - The variable is explicitly negated with `--no-option`. Unfortunately, this is not the case. OPT_BOOLEAN() increments the variable every time `--option` is given, and resets it to zero when `--no-option` is given. As a first step to remedy this, introduce a true boolean OPT_BOOL(), and rename OPT_BOOLEAN() to OPT_COUNTUP(). To help transitioning, OPT_BOOLEAN and OPTION_BOOLEAN are defined as deprecated synonyms to OPT_COUNTUP and OPTION_COUNTUP respectively. This is what `db7244b` (parse-options new features., 2007-11-07) from four years ago started by marking OPTION_BOOLEAN as "INCR would have been a better name". Some existing users do depend on the count-up semantics; for example, users of OPT__VERBOSE() could use it to raise the verbosity level with repeated use of `-v` on the command line, but they probably should be rewritten to use OPT__VERBOSITY() instead these days. I suspect that some users of OPT__FORCE() may also use it to implement different level of forcibleness but I didn't check. On top of this patch, here are the remaining clean-up tasks that other people can help: - Look at each hit in "git grep -e OPT_BOOLEAN"; trace all uses of the value that is set to the underlying variable, and if it can proven that the variable is only used as a boolean, replace it with OPT_BOOL(). If the caller does depend on the count-up semantics, replace it with OPT_COUNTUP() instead. - Same for OPTION_BOOLEAN; replace it with OPTION_SET_INT and arrange to set 1 to the variable for a true boolean, and otherwise replace it with OPTION_COUNTUP. - Look at each hit in "git grep -e OPT__VERBOSE -e OPT__QUIET" and see if they can be replaced with OPT__VERBOSITY(). I'll follow this message up with a separate patch as an example. Signed-off-by: Junio C Hamano <gitster@pobox.com>	14 years ago
René Scharfe	76946b76fe	add OPT__FORCE Add OPT__FORCE as a helper macro in the same spirit as OPT__VERBOSE et.al. to simplify defining -f/--force options. Signed-off-by: Rene Scharfe <rene.scharfe@lstfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>	14 years ago
René Scharfe	d52ee6e613	add description parameter to OPT__QUIET Allows better help text to be defined than "be quiet". Also make use of the macro in a place that already had a different description. No object code changes intended. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>	14 years ago
René Scharfe	e21adb8c10	add description parameter to OPT__DRY_RUN Allows better help text to be defined than "dry run". Also make use of the macro in places that already had a different description. No object code changes intended. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>	14 years ago
René Scharfe	fd03881a48	add description parameter to OPT__VERBOSE Allows better help text to be defined than "be verbose". Also make use of the macro in places that already had a different description. No object code changes intended. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>	14 years ago
Jonathan Nieder	6dcca4d0ea	Documentation/technical: avoid stray backslash in parse-options API docs Due to some unpleasant interaction between the `quote', 'italics', and `monospace` rules, a certain paragraph ends up rendered like so: ‘short` is a character for the short option (e.g. <tt>'e\’</tt> for <tt>-e</tt>, use <tt>0</tt> to omit), Use the {apostrophe} to avoid this. While at it, escape "->" strings: they are meant as a literal two-character C operator, not a right-pointing arrow. Reported-by: Frédéric Brière <fbriere@fbriere.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	15 years ago
Mark Lodato	73e9da0196	Add an optional argument for --color options Make git-branch, git-show-branch, git-grep, and all the diff-based programs accept an optional argument <when> for --color. The argument is a colorbool: "always", "never", or "auto". If no argument is given, "always" is used; --no-color is an alias for --color=never. This makes the command-line interface consistent with other GNU tools, such as `ls' and `grep', and with the git-config color options. Note that, without an argument, --color and --no-color work exactly as before. To implement this, two internal changes were made: 1. Allow the first argument of git_config_colorbool() to be NULL, in which case it returns -1 if the argument isn't "always", "never", or "auto". 2. Add OPT_COLOR_FLAG(), OPT__COLOR(), and parse_opt_color_flag_cb() to the option parsing library. The callback uses git_config_colorbool(), so color.h is now a dependency of parse-options.c. Signed-off-by: Mark Lodato <lodatom@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	15 years ago
Stephen Boyd	df217ed643	parse-opts: add OPT_FILENAME and transition builtins Commit `dbd0f5c` (Files given on the command line are relative to $cwd, 2008-08-06) introduced parse_options_fix_filename() as a minimal fix. OPT_FILENAME is intended to be a more robust fix for the same issue. OPT_FILENAME and its associated enum OPTION_FILENAME are used to represent filename options within the parse options API. This option is similar to OPTION_STRING. If --no is prefixed to the option the filename is unset. If no argument is given and the default value is set, the filename is set to the default value. The difference is that the filename is prefixed with the prefix passed to parse_options() (or parse_options_start()). Update git-apply, git-commit, git-fmt-merge-msg, and git-tag to use OPT_FILENAME with their filename options. Also, rename parse_options_fix_filename() to fix_filename() as it is no longer extern. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Stephen Boyd	3778292017	parse-opts: prepare for OPT_FILENAME To give OPT_FILENAME the prefix, we pass the prefix to parse_options() which passes the prefix to parse_options_start() which sets the prefix member of parse_opts_ctx accordingly. If there isn't a prefix in the calling context, passing NULL will suffice. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Stephen Boyd	ca156cfcc2	api-parse-options.txt: use 'func' instead of 'funct' Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
René Scharfe	e0319ff5ed	parseopt: add OPT_NUMBER_CALLBACK Add a way to recognize numerical options. The number is passed to a callback function as a string. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
René Scharfe	2f4b97f910	parseopt: add OPT_NEGBIT Add OPTION_NEGBIT and OPT_NEGBIT, mirroring OPTION_BIT and OPT_BIT. OPT_NEGBIT can be used together with OPT_BIT to define two options that cancel each other out. Note: this patch removes the reminder from the test script because it adds a test for --no-or4 and there already was one for --or4. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
René Scharfe	0d260f9a09	parseopt: prevent KEEP_UNKNOWN and STOP_AT_NON_OPTION from being used together As suggested by Junio, disallow the flags PARSE_OPT_KEEP_UNKNOWN and PARSE_OPT_STOP_AT_NON_OPTION to be turned on at the same time, as a value of an unknown option could be mistakenly classified as a non-option, stopping the parser early. E.g.: git cmd --known --unknown value arg0 arg1 The parser should have stopped at "arg0", but it already stops at "value". This patch makes parse_options() die if the two flags are used in combination. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
René Scharfe	9ad7e6ea24	parseopt: document KEEP_ARGV0, KEEP_UNKNOWN, NO_INTERNAL_HELP Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Stephan Beyer	224712e521	api-parse-options.txt: Introduce documentation for parse options API Add some documentation of basics, macros and callback implementation of the parse-options API. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	530e741c72	Start preparing the API documents. Most of them are still stubs, but the procedure to build the HTML documentation, maintaining the index and installing the end product are there. I placed names of people who are likely to know the most about the topic in the stub files, so that volunteers will know whom to ask questions as needed. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago

20 Commits (d72fbe8111fbd3083d7063078c96eed27098490c)