kernel/git - git - PowerEL Git System

Commit Graph

Author	SHA1	Message	Date
Johannes Sixt	f4b05a4947	Make the tab width used for whitespace checks configurable A new whitespace "rule" is added that sets the tab width to use for whitespace checks and fix-ups and replaces the hard-coded constant 8. Since the setting is part of the rules, it can be set per file using .gitattributes. The new configuration is backwards compatible because older git versions simply ignore unknown whitespace rules. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	14 years ago
Johannes Sixt	d35711adc4	apply --whitespace=fix: fix tab-in-indent When the whitespace rule tab-in-indent is enabled, apply --whitespace=fix replaces tabs by the appropriate amount of blanks. The code used "dst->len % 8" as the criterion to stop adding blanks. But it forgot that dst holds more than just the current line. Consequently, the modulus was computed correctly only for the first added line, but not for the second and subsequent lines. Fix it. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Acked-by: Chris Webb <chris@arachsys.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	14 years ago
Jonathan Nieder	33fc521193	t4124 (apply --whitespace): use test_might_fail Use test_might_fail instead of ignoring the exit status from git config --unset, and let the exit status propagate past rm -f (which does not fail on ENOENT). Otherwise bugs that lead git config to crash would not be detected when this test runs. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	14 years ago
Jonathan Nieder	2dec68cf8f	tests: add missing &&, batch 2 Same rules as before: this patch only adds " &&" to the end of some lines in the test suite. Intended to be applied on top of or squashed with the last batch if they look okay. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	14 years ago
Gary V. Vaughan	4fdf71be1c	tests: use "test_cmp", not "diff", when verifying the result In tests, call test_cmp rather than raw diff where possible (i.e. if the output does not go to a pipe), to allow the use of, say, 'cmp' when the default 'diff -u' is not compatible with a vendor diff. When that is not possible, use $DIFF, as set in GIT-BUILD-OPTIONS. Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	15 years ago
Björn Gustavsson	0c3ef984fa	apply: Allow blank trailing context lines to match beyond EOF In `51667147be`, "git apply --whitespace=fix" was extended to allow a blank context line to match beyond the end of the file, but only if the context line was in the leading part of the hunk (i.e. the hunk inserted additional contents at the end of the file). Drop the restriction that the context line must be in the leading part of the hunk, thus allowing a file to be changed from: a (blank line) to: b a (blank line) Note that the blank line will be kept, because "--whitespace=fix" only removes trailing blank lines that a hunk would add, never trailing blank lines in the context. Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	15 years ago
Chris Webb	a347b17f15	whitespace: tests for git-apply --whitespace=fix with tab-in-indent Signed-off-by: Chris Webb <chris@arachsys.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	15 years ago
Björn Gustavsson	c1376c12b7	t4124: Add additional tests of --whitespace=fix Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	15 years ago
Junio C Hamano	77b15bbd88	apply --whitespace=warn/error: diagnose blank at EOF "git apply" strips new blank lines at EOF under --whitespace=fix option, but neigher --whitespace=warn nor --whitespace=error paid any attention to these errors. Introduce a new whitespace error class, blank-at-eof, to make the whitespace error handling more consistent. The patch adds a new "linenr" field to the struct fragment in order to record which line the hunk started in the input file, but this is needed solely for reporting purposes. The detection of this class of whitespace errors cannot be done while parsing a patch like we do for all the other classes of whitespace errors. It instead has to wait until we find where to apply the hunk, but at that point, we do not have an access to the original line number in the input file anymore, hence the new field. Depending on your point of view, this may be a bugfix that makes warn and error in line with fix. Or you could call it a new feature. The line between them is somewhat fuzzy in this case. Strictly speaking, triggering more errors than before is a change in behaviour that is not backward compatible, even though the reason for the change is because the code was not checking for an error that it should have. People who do not want added blank lines at EOF to trigger an error can disable the new error class. Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Junio C Hamano	94ea026b35	apply --whitespace: warn blank but not necessarily empty lines at EOF The whitespace error of adding blank lines at the end of file should trigger if you added a non-empty line at the end, if the contents of the line is full of whitespaces. Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Junio C Hamano	efa574438f	apply --whitespace=fix: detect new blank lines at eof correctly The command tries to strip blank lines at the end of the file added by a patch. It is done by first detecting if a hunk in patch has additional blank lines at the end of itself, and if so checking if such a hunk applies at the end of file. This patch addresses a bug in the logic to implement the former (the previous one addressed a bug in the latter). If the original ends with blank lines, often the patch hunk ends like this: @@ -l,5 +m,7 @@$ _context$ _context$ -deleted$ +$ +$ +$ _$ _$ where _ stands for SP and $ shows a end-of-line. This example patch adds three trailing blank lines, but the code fails to notice it, because it only pays attention to added blank lines at the very end of the hunk. In this example, the three added blank lines do not appear textually at the end in the patch, even though you can see that they are indeed added at the end, if you rearrange the diff like this: @@ -l,5 +m,7 @@$ _context$ _context$ -deleted$ _$ _$ +$ +$ +$ The fix is not to reset the number of (candidate) added blank lines at the end when the loop sees a context line that is empty. Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Junio C Hamano	ef2035c5e5	apply --whitespace=fix: fix handling of blank lines at the eof `b94f2ed` (builtin-apply.c: make it more line oriented, 2008-01-26) broke the logic used to detect if a hunk adds blank lines at the end of the file. With the new code after that commit: - img holds the contents of the file that the hunk is being applied to; - preimage has the lines the hunk expects to be in img; and - postimage has the lines the hunk wants to update the part in img that corresponds to preimage with. and we need to compare if the last line of preimage (not postimage) matches the last line of img to see if the hunk applies at the end of the file. Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Junio C Hamano	422a82f213	Fix severe breakage in "git-apply --whitespace=fix" `735c674` (Trailing whitespace and no newline fix, 2009-07-22) completely broke --whitespace=fix, causing it to lose all the empty lines in a patch. Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
SZEDER Gábor	735c674416	Trailing whitespace and no newline fix If a patch adds a new line to the end of a file and this line ends with one trailing whitespace character and has no newline, then '--whitespace=fix' currently does not remove that trailing whitespace. This patch fixes this by removing the check for trailing whitespace at the end of the line at a hardcoded offset which does not take the eventual absence of newline into account. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Nanako Shiraishi	3604e7c5c6	tests: use "git xyzzy" form (t3600 - t6999) Converts tests between t3600-t6300. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	cf1b7869f0	Use gitattributes to define per-path whitespace rule The `core.whitespace` configuration variable allows you to define what `diff` and `apply` should consider whitespace errors for all paths in the project (See gitlink:git-config[1]). This attribute gives you finer control per path. For example, if you have these in the .gitattributes: frotz whitespace nitfol -whitespace xyzzy whitespace=-trailing all types of whitespace problems known to git are noticed in path 'frotz' (i.e. diff shows them in diff.whitespace color, and apply warns about them), no whitespace problem is noticed in path 'nitfol', and the default types of whitespace problems except "trailing whitespace" are noticed for path 'xyzzy'. A project with mixed Python and C might want to have: .c whitespace .py whitespace=-indent-with-non-tab in its toplevel .gitattributes file. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	d5a4164140	builtin-apply: teach whitespace_rules We earlier introduced core.whitespace to allow users to tweak the definition of what the "whitespace errors" are, for the purpose of diff output highlighting. This teaches the same to git-apply, so that the command can both detect (when --whitespace=warn option is given) and fix (when --whitespace=fix option is given) as configured. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago

21 Commits (d5f6b1d756a29255efedee3cb6e8526aedcfeb00)