Lots of die() calls did not actually report the kind of error, which
can leave the user confused as to the real problem. Use die_errno()
where we check a system/library call that sets errno on failure, or
one of the following that wrap such calls:
Function Passes on error from
-------- --------------------
odb_pack_keep open
read_ancestry fopen
read_in_full xread
strbuf_read xread
strbuf_read_file open or strbuf_read_file
strbuf_readlink readlink
write_in_full xwrite
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old behaviour still remains with --worktree-attributes, and it is
always on for the legacy "git tar-tree".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we came from git.c the first arg would be "archive".
"git-archive" isn't a bug because cmd_archive() doesn't check
the first arg.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
User notifications are presented as 'git cmd', and code comments
are presented as '"cmd"' or 'git's cmd', rather than 'git-cmd'.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a mechanical conversion of all '*.c' files with:
s/((?:die|error|warning)\("git)-(\S+:)/$1 $2/;
The result was manually inspected and no false positive was found.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous step converted use of strncmp() with literal string
mechanically even when the result is only used as a boolean:
if (!strncmp("foo", arg, 3)) ==> if (!(-prefixcmp(arg, "foo")))
This step manually cleans them up to read:
if (!prefixcmp(arg, "foo"))
Signed-off-by: Junio C Hamano <junkio@cox.net>
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have a number of badly checked write() calls. Often we are
expecting write() to write exactly the size we requested or fail,
this fails to handle interrupts or short writes. Switch to using
the new write_in_full(). Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xwrite().
Note, the changes to config handling are much larger and handled
in the next patch in the sequence.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have a number of badly checked read() calls. Often we are
expecting read() to read exactly the size we requested or fail, this
fails to handle interrupts or short reads. Add a read_in_full()
providing those semantics. Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xread().
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a mechanical clean-up of the way *.c files include
system header files.
(1) sources under compat/, platform sha-1 implementations, and
xdelta code are exempt from the following rules;
(2) the first #include must be "git-compat-util.h" or one of
our own header file that includes it first (e.g. config.h,
builtin.h, pkt-line.h);
(3) system headers that are included in "git-compat-util.h"
need not be included in individual C source files.
(4) "git-compat-util.h" does not have to include subsystem
specific header files (e.g. expat.h).
Signed-off-by: Junio C Hamano <junkio@cox.net>
The command now issues a big deprecation warning message and runs
git-archive command with appropriate arguments.
git-tar-tree $tree_ish $base always forces $base to be the leading
directory name, so the --prefix parameter passed internally to
git-archive is a slash appended to it, i.e. "--prefix=$base/".
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch doesn't change any functionality, it only moves code around. It
makes seeing the few remaining lines of git-tar-tree code easier. ;-)
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
generate_tar() eventually calls write_tar_archive() which does all the
"real" work and which also calls git_config(git_tar_config). We only
need to do this once.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch removes the custom tree walker tree_traverse(), and makes
generate_tar() use write_tar_archive() and the infrastructure provided
by git-archive instead.
As a kind of side effect, make write_tar_archive() able to handle NULL
as base directory, as this is what the new and simple generate_tar()
uses to indicate the absence of a base directory. This was simpler
and cleaner than playing tricks with empty strings.
The behaviour of git-tar-tree should be unchanged (quick tests didn't
indicate otherwise) except for the text of some error messages.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from 5d2aea4cb383a43e40d47ab69d8ad7a495df6ea2 commit)
This is based on Rene Scharfe's earlier patch, but uses the
archiver support introduced by the previous patch.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
builtin-tar-tree.c::git_tar_config() and http-push.c::add_one_object()
are not used outside their own files.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The little helper write_or_die() won't come back with bad news about
full disks or broken pipes. It either succeeds or terminates the
program, making additional error handling unnecessary.
This patch adds the new function and uses it to replace two similar
ones (the one in tar-tree originally has been copied from cat-file
btw.). I chose to add the fd parameter which both lacked to make
write_or_die() just as flexible as write() and thus suitable for
lib-ification.
There is a regression: error messages emitted by this function don't
show the program name, while the replaced two functions did. That's
acceptable, I think; a lot of other functions do the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the name of Standardization, this cleanses the last usage string of
mystical creatures. But they still dwell deep within the source and in
some debug messages, it is said.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Free the root tree object buffer when we're done, plugging a minor leak
in generate_tar(). Note: we cannot simply free(tree.buf) because this
pointer is modified by tree_entry() calls in traverse_tree().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the calling convention of built-in commands and
passes the "prefix" (i.e. pathname of $PWD relative to the
project root level) down to them.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
By default, git-tar-tree(1) sets file and directories modes to 0666
or 0777. While this is both useful and acceptable for projects such
as the Linux Kernel, it might be excessive for other projects. With
this variable, it becomes possible to tell git-tar-tree(1) to apply
a specific umask to the modes above. The special value "user"
indicates that the user's current umask will be used. This should be
enough for most projects, as it will lead to the same permissions as
git-checkout(1) would use. The default value remains 0, which means
world read-write.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the use of safe_strncpy() even more. Since it has the
same semantics as strlcpy() use this name instead. Also move the
definition from inside path.c to its own file compat/strlcpy.c, and use
it conditionally at compile time, since some platforms already has
strlcpy(). It's included in the same way as compat/setenv.c.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Noticed by Florian Forster: Use a char pointer when adding offsets,
because void pointer arithmetic is a GNU extension. Const'ify the
function arguments while we're at it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We can write the trailer in one or at most two steps; it will always
fit within two blocks. With the last caller of get_record() gone we
can get rid of it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
By being an internal command git-get-commit-id can make use of
struct ustar_header and other stuff and stops wasting precious
disk space.
Note: I recycled one of the two "tar-tree" entries instead of
splitting that cleanup into a separate patch.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: original fix was done by Pavel and this contains improvements
by Rene.]
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Acked-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a "tree_entry()" function that combines the common operation of
doing a "tree_entry_extract()" + "update_tree_entry()".
It also has a simplified calling convention, designed for simple loops
that traverse over a whole tree: the arguments are pointers to the tree
descriptor and a name_entry structure to fill in, and it returns a boolean
"true" if there was an entry left to be gotten in the tree.
This allows tree traversal with
struct tree_desc desc;
struct name_entry entry;
desc.buf = tree->buffer;
desc.size = tree->size;
while (tree_entry(&desc, &entry) {
... use "entry.{path, sha1, mode, pathlen}" ...
}
which is not only shorter than writing it out in full, it's hopefully less
error prone too.
[ It's actually a tad faster too - we don't need to recalculate the entry
pathlength in both extract and update, but need to do it only once.
Also, some callers can avoid doing a "strlen()" on the result, since
it's returned as part of the name_entry structure.
However, by now we're talking just 1% speedup on "git-rev-list --objects
--all", and we're definitely at the point where tree walking is no
longer the issue any more. ]
NOTE! Not everybody wants to use this new helper function, since some of
the tree walkers very much on purpose do the descriptor update separately
from the entry extraction. So the "extract + update" sequence still
remains as the core sequence, this is just a simplified interface.
We should probably add a silly two-line inline helper function for
initializing the descriptor from the "struct tree" too, just to cut down
on the noise from that common "desc" initializer.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes tar-tree a built-in. As an added bonus, you can now
say:
git tar-tree --remote=remote-repository <ent> [<base>]
This does not work with git-daemon yet, but should work with
localhost and git over ssh transports.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This replaces occurences of "blob", "commit", "tag", and "tree",
where they're really used as type specifiers, which we already
have defined global constants for.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
buf is not used afterwards. The compiler optimized the dead store out
anyway, but let's clean the source, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Introduce tree-walk.[ch] and move "struct tree_desc" and
associated functions from various places.
Rename DIFF_FILE_CANON_MODE(mode) macro to canon_mode(mode) and
move it to cache.h. This macro returns the canonicalized
st_mode value in the host byte order for files, symlinks and
directories -- to be compared with a tree_desc entry.
create_ce_mode(mode) in cache.h is similar but is intended to be
used for index entries (so it does not work for directories) and
returns the value in the network byte order.
Signed-off-by: Junio C Hamano <junkio@cox.net>
... to store parts of the path, if possible. This allows us to avoid
writing extended headers in certain cases (long pathes can only be
split at '/' chars).
Also adds a file to the test repo with a 100 chars long directory name.
Even old versions of tar that don't understand POSIX extended headers
should be able to handle this testcase.
Btw.: The longest path in the kernel tree currently has 70 chars.
Together with a 30 chars long prefix this would already cross the
field limit of 100 chars.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
... and use it initially to write global extended header records.
Improvements compared to the old write_header():
- Uses a struct ustar_header instead of hardcoded offsets.
- Takes one struct strbuf as path argument instead of a (basedir,
prefix, name) tuple.
- Not only writes the tar header, but also the contents of the
file, if any.
- Does not write directly into the ring buffer. This allows the
code to be layed out more naturally, because there is no more
ordering constraint. Before we had to first finish writing the
extended header, now we can construct the extended and normal
headers in parallel.
- The typeflag parameter has been replaced by (reasonable) magic
values. path == NULL indicates an extended header, additionally
sha1 == NULL means it is a global extended header.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes sure that many commands that take refs on the command
line to honor core.warnambiguousrefs configuration. Earlier,
the commands affected by this patch did not read the
configuration file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes two bugs introduced when we switched to generic tree
traversal code.
(1) directory mode recorded silently became 0755, not 0777
(2) if passed a tree object (not a commit), it emitted an
alarming error message (but proceeded anyway).
Signed-off-by: Junio C Hamano <junkio@cox.net>
It was open-coding getting the commit date from a commit.
Signed-off-by: Daniel Barkalow <barkalow@iabervon>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It was using an open-coded tree parser; use a struct tree instead.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier commit 38ec15a973 forgot
to apply the same principle of not forcing go-w to the base
directory when specified.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We had errno==EINTR check after read(2)/write(2) sprinkled all
over the places, always doing continue. Consolidate them into
xread()/xwrite() wrapper routines.
Credits for suggestion goes to HPA -- bugs are mine.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Thomas Rast