kernel/git - git - PowerEL Git System

Commit Graph

Author	SHA1	Message	Date
Junio C Hamano	d6b8fc303b	gitignore(5): Allow "foo/" in ignore list to match directory "foo" A pattern "foo/" in the exclude list did not match directory "foo", but a pattern "foo" did. This attempts to extend the exclude mechanism so that it would while not matching a regular file or a symbolic link "foo". In order to differentiate a directory and non directory, this passes down the type of path being checked to excluded() function. A downside is that the recursive directory walk may need to run lstat(2) more often on systems whose "struct dirent" do not give the type of the entry; earlier it did not have to do so for an excluded path, but we now need to figure out if a path is a directory before deciding to exclude it. This is especially bad because an idea similar to the earlier CE_UPTODATE optimization to reduce number of lstat(2) calls would by definition not apply to the codepaths involved, as (1) directories will not be registered in the index, and (2) excluded paths will not be in the index anyway. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	b2979ff599	core.whitespace: cr-at-eol This new error mode allows a line to have a carriage return at the end of the line when checking and fixing trailing whitespace errors. Some people like to keep CRLF line ending recorded in the repository, and still want to take advantage of the automated trailing whitespace stripping. We still show ^M in the diff output piped to "less" to remind them that they do have the CR at the end, but these carriage return characters at the end are no longer flagged as errors. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	9cb76b8cdc	lazy index hashing This delays the hashing of index names until it becomes necessary for the first time. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Linus Torvalds	cf558704fb	Create pathname-based hash-table lookup into index This creates a hash index of every single file added to the index. Right now that hash index isn't actually used for much: I implemented a "cache_name_exists()" function that uses it to efficiently look up a filename in the index without having to do the O(logn) binary search, but quite frankly, that's not why this patch is interesting. No, the whole and only reason to create the hash of the filenames in the index is that by modifying the hash function, you can fairly easily do things like making it always hash equivalent names into the same bucket. That, in turn, means that suddenly questions like "does this name exist in the index under an _equivalent_ name?" becomes much much cheaper. Guiding principles behind this patch: - it shouldn't be too costly. In fact, my primary goal here was to actually speed up "git commit" with a fully populated kernel tree, by being faster at checking whether a file already existed in the index. I did succeed, but only barely: Best before: [torvalds@woody linux]$ time git commit > /dev/null real 0m0.255s user 0m0.168s sys 0m0.088s Best after: [torvalds@woody linux]$ time ~/git/git commit > /dev/null real 0m0.233s user 0m0.144s sys 0m0.088s so some things are actually faster (~8%). Caveat: that's really the best case. Other things are invariably going to be slightly slower, since we populate that index cache, and quite frankly, few things really use it to look things up. That said, the cost is really quite small. The worst case is probably doing a "git ls-files", which will do very little except puopulate the index, and never actually looks anything up in it, just lists it. Before: [torvalds@woody linux]$ time git ls-files > /dev/null real 0m0.016s user 0m0.016s sys 0m0.000s After: [torvalds@woody linux]$ time ~/git/git ls-files > /dev/null real 0m0.021s user 0m0.012s sys 0m0.008s and while the thing has really gotten relatively much slower, we're still talking about something almost unmeasurable (eg 5ms). And that really should be pretty much the worst case. So we lose 5ms on one "benchmark", but win 22ms on another. Pick your poison - this patch has the advantage that it will _likely_ speed up the cases that are complex and expensive more than it slows down the cases that are already so fast that nobody cares. But if you look at relative speedups/slowdowns, it doesn't look so good. - It should be simple and clean The code may be a bit subtle (the reasons I do hash removal the way I do etc), but it re-uses the existing hash.c files, so it really is fairly small and straightforward apart from a few odd details. Now, this patch on its own doesn't really do much, but I think it's worth looking at, if only because if done correctly, the name hashing really can make an improvement to the whole issue of "do we have a filename that looks like this in the index already". And at least it gets real testing by being used even by default (ie there is a real use-case for it even without any insane filesystems). NOTE NOTE NOTE! The current hash is a joke. I'm ashamed of it, I'm just not ashamed of it enough to really care. I took all the numbers out of my nether regions - I'm sure it's good enough that it works in practice, but the whole point was that you can make a really much fancier hash that hashes characters not directly, but by their upper-case value or something like that, and thus you get a case-insensitive hash, while still keeping the name and the index itself totally case sensitive. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Linus Torvalds	7a51ed66f6	Make on-disk index representation separate from in-core one This converts the index explicitly on read and write to its on-disk format, allowing the in-core format to contain more flags, and be simpler. In particular, the in-core format is now host-endian (as opposed to the on-disk one that is network endian in order to be able to be shared across machines) and as a result we can dispense with all the htonl/ntohl on accesses to the cache_entry fields. This will make it easier to make use of various temporary flags that do not exist in the on-disk format. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	17 years ago
Junio C Hamano	eadb583134	Avoid running lstat(2) on the same cache entry. Aside from the lstat(2) done for work tree files, there are quite many lstat(2) calls in refname dwimming codepath. This patch is not about reducing them. * It adds a new ce_flag, CE_UPTODATE, that is meant to mark the cache entries that record a regular file blob that is up to date in the work tree. If somebody later walks the index and wants to see if the work tree has changes, they do not have to be checked with lstat(2) again. * fill_stat_cache_info() marks the cache entry it just added with CE_UPTODATE. This has the effect of marking the paths we write out of the index and lstat(2) immediately as "no need to lstat -- we know it is up-to-date", from quite a lot fo callers: - git-apply --index - git-update-index - git-checkout-index - git-add (uses add_file_to_index()) - git-commit (ditto) - git-mv (ditto) * refresh_cache_ent() also marks the cache entry that are clean with CE_UPTODATE. * write_index is changed not to write CE_UPTODATE out to the index file, because CE_UPTODATE is meant to be transient only in core. For the same reason, CE_UPDATE is not written to prevent an accident from happening. Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	17 years ago
Junio C Hamano	7fec10b7f4	index: be careful when handling long names We currently use lower 12-bit (masked with CE_NAMEMASK) in the ce_flags field to store the length of the name in cache_entry, without checking the length parameter given to create_ce_flags(). This can make us store incorrect length. Currently we are mostly protected by the fact that many codepaths first copy the path in a variable of size PATH_MAX, which typically is 4096 that happens to match the limit, but that feels like a bug waiting to happen. Besides, that would not allow us to shorten the width of CE_NAMEMASK to use the bits for new flags. This redefines the meaning of the name length stored in the cache_entry. A name that does not fit is represented by storing CE_NAMEMASK in the field, and the actual length needs to be computed by actually counting the bytes in the name[] field. This way, only the unusually long paths need to suffer. Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	17 years ago
Shawn O. Pearce	c9ced051c3	Fix random fast-import errors when compiled with NO_MMAP fast-import was relying on the fact that on most systems mmap() and write() are synchronized by the filesystem's buffer cache. We were relying on the ability to mmap() 20 bytes beyond the current end of the file, then later fill in those bytes with a future write() call, then read them through the previously obtained mmap() address. This isn't always true with some implementations of NFS, but it is especially not true with our NO_MMAP=YesPlease build time option used on some platforms. If fast-import was built with NO_MMAP=YesPlease we used the malloc()+pread() emulation and the subsequent write() call does not update the trailing 20 bytes of a previously obtained "mmap()" (aka malloc'd) address. Under NO_MMAP that behavior causes unpack_entry() in sha1_file.c to be unable to read an object header (or data) that has been unlucky enough to be written to the packfile at a location such that it is in the trailing 20 bytes of a window previously opened on that same packfile. This bug has gone unnoticed for a very long time as it is highly data dependent. Not only does the object have to be placed at the right position, but it also needs to be positioned behind some other object that has been accessed due to a branch cache invalidation. In other words the stars had to align just right, and if you did run into this bug you probably should also have purchased a lottery ticket. Fortunately the workaround is a lot easier than the bug explanation. Before we allow unpack_entry() to read data from a pack window that has also (possibly) been modified through write() we force all existing windows on that packfile to be closed. By closing the windows we ensure that any new access via the emulated mmap() will reread the packfile, updating to the current file content. This comes at a slight performance degredation as we cannot reuse previously cached windows when we update the packfile. But it is a fairly minor difference as the window closes happen at only two points: - When the packfile is finalized and its .idx is generated: At this stage we are getting ready to update the refs and any data access into the packfile is going to be random, and is going after only the branch tips (to ensure they are valid). Our existing windows (if any) are not likely to be positioned at useful locations to access those final tip commits so we probably were closing them before anyway. - When the branch cache missed and we need to reload: At this point fast-import is getting change commands for the next commit and it needs to go re-read a tree object it previously had written out to the packfile. What windows we had (if any) are not likely to cover the tree in question so we probably were closing them before anyway. We do try to avoid unnecessarily closing windows in the second case by checking to see if the packfile size has increased since the last time we called unpack_entry() on that packfile. If the size has not changed then we have not written additional data, and any existing window is still vaild. This nicely handles the cases where fast-import is going through a branch cache reload and needs to read many trees at once. During such an event we are not likely to be updating the packfile so we do not cycle the windows between reads. With this change in place t9301-fast-export.sh (which was broken by `c3b0dec509`) finally works again. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Brandon Casey	d6cf61bfd4	close_lock_file(): new function in the lockfile API The lockfile API is a handy way to obtain a file that is cleaned up if you die(). But sometimes you would need this sequence to work: 1. hold_lock_file_for_update() to get a file descriptor for writing; 2. write the contents out, without being able to decide if the results should be committed or rolled back; 3. do something else that makes the decision --- and this "something else" needs the lockfile not to have an open file descriptor for writing (e.g. Windows do not want a open file to be renamed); 4. call commit_lock_file() or rollback_lock_file() as appropriately. This adds close_lock_file() you can call between step 2 and 3 in the above sequence. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Wincent Colaiuta	c1795bb08a	Unify whitespace checking This commit unifies three separate places where whitespace checking was performed: - the whitespace checking previously done in builtin-apply.c is extracted into a function in ws.c - the equivalent logic in "git diff" is removed - the emit_line_with_ws() function is also removed because that also rechecks the whitespace, and its functionality is rolled into ws.c The new function is called check_and_emit_line() and it does two things: checks a line for whitespace errors and optionally emits it. The checking is based on lines of content rather than patch lines (in other words, the caller must strip the leading "+" or "-"); this was suggested by Junio on the mailing list to allow for a future extension to "git show" to display whitespace errors in blobs. At the same time we teach it to report all classes of whitespace errors found for a given line rather than reporting only the first found error. Signed-off-by: Wincent Colaiuta <win@wincent.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Jeff King	6e9af863ee	Support GIT_PAGER_IN_USE environment variable When deciding whether or not to turn on automatic color support, git_config_colorbool checks whether stdout is a tty. However, because we run a pager, if stdout is not a tty, we must check whether it is because we started the pager. This used to be done by checking the pager_in_use variable. This variable was set only when the git program being run started the pager; there was no way for an external program running git indicate that it had already started a pager. This patch allows a program to set GIT_PAGER_IN_USE to a true value to indicate that even though stdout is not a tty, it is because a pager is being used. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	774751a8bc	Re-fix "builtin-commit: fix --signoff" An earlier fix to the said commit was incomplete; it mixed up the meaning of the flag parameter passed to the internal fmt_ident() function, so this corrects it. git_author_info() and git_committer_info() can be told to issue a warning when no usable user information is found, and optionally can be told to error out. Operations that actually use the information to record a new commit or a tag will still error out, but the caller to leave reflog record will just silently use bogus user information. Not warning on misconfigured user information while writing a reflog entry is somewhat debatable, but it is probably nicer to the users to silently let it pass, because the only information you are losing is who checked out the branch. * git_author_info() and git_committer_info() used to take 1 (positive int) to error out with a warning on misconfiguration; this is now signalled with a symbolic constant IDENT_ERROR_ON_NO_NAME. * These functions used to take -1 (negative int) to warn but continue; this is now signalled with a symbolic constant IDENT_WARN_ON_NO_NAME. * fmt_ident() function implements the above error reporting behaviour common to git_author_info() and git_committer_info(). A symbolic constant IDENT_NO_DATE can be or'ed in to the flag parameter to make it return only the "Name <email@address.xz>". * fmt_name() is a thin wrapper around fmt_ident() that always passes IDENT_ERROR_ON_NO_NAME and IDENT_NO_DATE. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	cf1b7869f0	Use gitattributes to define per-path whitespace rule The `core.whitespace` configuration variable allows you to define what `diff` and `apply` should consider whitespace errors for all paths in the project (See gitlink:git-config[1]). This attribute gives you finer control per path. For example, if you have these in the .gitattributes: frotz whitespace nitfol -whitespace xyzzy whitespace=-trailing all types of whitespace problems known to git are noticed in path 'frotz' (i.e. diff shows them in diff.whitespace color, and apply warns about them), no whitespace problem is noticed in path 'nitfol', and the default types of whitespace problems except "trailing whitespace" are noticed for path 'xyzzy'. A project with mixed Python and C might want to have: .c whitespace .py whitespace=-indent-with-non-tab in its toplevel .gitattributes file. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Christian Couder	b319ce4c14	Trace and quote with argv: get rid of unneeded count argument. Now that str_buf takes care of all the allocations, there is no more gain to pass an argument count. So this patch removes the "count" argument from: - "sq_quote_argv" - "trace_argv_printf" and all the callers. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	d9ccfe7711	Fix --signoff in builtin-commit differently. Introduce fmt_name() specifically meant for formatting the name and email pair, to add signed-off-by value. This reverts parts of `13208572fb` (builtin-commit: fix --signoff) so that an empty datestamp string given to fmt_ident() by mistake will error out as before. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	b45563a229	rename: Break filepairs with different types. When we consider if a path has been totally rewritten, we did not touch changes from symlinks to files or vice versa. But a change that modifies even the type of a blob surely should count as a complete rewrite. While we are at it, modernise diffcore-break to be aware of gitlinks (we do not want to touch them). Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	b6ec1d619f	Fix add_files_to_cache() to take pathspec, not user specified list of files This separates the logic to limit the extent of change to the index by where you are (controlled by "prefix") and what you specify from the command line (controlled by "pathspec"). Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	ee425e4643	Export three helper functions from ls-files This exports three helper functions from ls-files. * pathspec_match() checks if a given path matches a set of pathspecs and optionally records which pathspec was used. This function used to be called "match()" but renamed to be a bit less vague. * report_path_error() takes a set of pathspecs and the record pathspec_match() above leaves, and gives error message. This was split out of the main function of ls-files. * overlay_tree_on_cache() takes a tree-ish (typically "HEAD") and overlays it on the current in-core index. By iterating over the resulting index, the caller can find out the paths in either the index or the HEAD. This function used to be called "overlay_tree()" but renamed to be a bit more descriptive. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Steffen Prohaska	605b4978a1	refactor fetch's ref matching to use refname_match() The old rules used by fetch were coded as a series of ifs. The old rules are: 1) match full refname if it starts with "refs/" or matches "HEAD" 2) verify that full refname starts with "refs/" 3) match abbreviated name in "refs/" if it starts with "heads/", "tags/", or "remotes/". 4) match abbreviated name in "refs/heads/" This is replaced by the new rules a) match full refname b) match abbreviated name prefixed with "refs/" c) match abbreviated name prefixed with "refs/heads/" The details of the new rules are different from the old rules. We no longer verify that the full refname starts with "refs/". The new rule (a) matches any full string. The old rules (1) and (2) were stricter. Now, the caller is responsible for using sensible full refnames. This should be the case for the current code. The new rule (b) is less strict than old rule (3). The new rule accepts abbreviated names that start with a non-standard prefix below "refs/". Despite this modifications the new rules should handle all cases as expected. Two tests are added to verify that fetch does not resolve short tags or HEAD in remotes. We may even think about loosening the rules a bit more and unify them with the rev-parse rules. This would be done by replacing ref_ref_fetch_rules with ref_ref_parse_rules. Note, the two new test would break. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Steffen Prohaska	79803322c1	add refname_match() We use at least two rulesets for matching abbreviated refnames with full refnames (starting with 'refs/'). git-rev-parse and git-fetch use slightly different rules. This commit introduces a new function refname_match (const char abbrev_name, const char full_name, const char *rules). abbrev_name is expanded using the rules and matched against full_name. If a match is found the function returns true. rules is a NULL-terminate list of format patterns with "%.s", for example: const char ref_rev_parse_rules[] = { "%.s", "refs/%.s", "refs/tags/%.s", "refs/heads/%.s", "refs/remotes/%.s", "refs/remotes/%.s/HEAD", NULL }; Asterisks are included in the format strings because this is the form required in sha1_name.c. Sharing the list with the functions there is a good idea to avoid duplicating the rules. Hopefully this facilitates unified matching rules in the future. This commit makes the rules used by rev-parse for resolving refs to sha1s available for string comparison. Before this change, the rules were buried in get_sha1() and dwim_ref(). A follow-up commit will refactor the rules used by fetch. refname_match() will be used for matching refspecs in git-send-pack. Thanks to Daniel Barkalow <barkalow@iabervon.org> for pointing out that ref_matches_abbrev in remote.c solves a similar problem and care should be taken to avoid confusion. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Jeff King	2a0fe89a97	send-pack: tighten remote error reporting Previously, we set all ref pushes to 'OK', and then marked them as errors if the remote reported so. This has the problem that if the remote dies or fails to report a ref, we just assume it was OK. Instead, we use a new non-OK state to indicate that we are expecting status (if the remote doesn't support the report-status feature, we fall back on the old behavior). Thus we can flag refs for which we expected a status, but got none (conversely, we now also print a warning for refs for which we get a status, but weren't expecting one). This also allows us to simplify the receive_status exit code, since each ref is individually marked with failure until we get a success response. We can just print the usual status table, so the user still gets a sense of what we were trying to do when the failure happened. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Jeff King	cda69f481d	make "find_ref_by_name" a public function This was a static in remote.c, but is generally useful. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Shawn O. Pearce	9f8a15c734	Fix warning about bitfield in struct ref cache.h:503: warning: type of bit-field 'force' is a GCC extension cache.h:504: warning: type of bit-field 'merge' is a GCC extension cache.h:505: warning: type of bit-field 'nonfastforward' is a GCC extension cache.h:506: warning: type of bit-field 'deletion' is a GCC extension So we change it to an 'unsigned int' which is not a GCC extension. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Jeff King	ca74c458a3	send-pack: assign remote errors to each ref This lets us show remote errors (e.g., a denied hook) along with the usual push output. There is a slightly clever optimization in receive_status that bears explanation. We need to correlate the returned status and our ref objects, which naively could be an O(m*n) operation. However, since the current implementation of receive-pack returns the errors to us in the same order that we sent them, we optimistically look for the next ref to be looked up to come after the last one we have found. So it should be an O(m+n) merge if the receive-pack behavior holds, but we fall back to a correct but slower behavior if it should change. Signed-off-by: Jeff King <peff@peff.net> Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Jeff King	8736a84890	send-pack: track errors for each ref Instead of keeping the 'ret' variable, we instead have a status flag for each ref that tracks what happened to it. We then print the ref status after all of the refs have been examined. This paves the way for three improvements: - updating tracking refs only for non-error refs - incorporating remote rejection into the printed status - printing errors in a different order than we processed (e.g., consolidating non-ff errors near the end with a special message) Signed-off-by: Jeff King <peff@peff.net> Acked-by: Alex Riesen <raa.lkml@gmail.com> Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	dcf0c16ef1	core.excludesfile clean-up There are inconsistencies in the way commands currently handle the core.excludesfile configuration variable. The problem is the variable is too new to be noticed by anything other than git-add and git-status. * git-ls-files does not notice any of the "ignore" files by default, as it predates the standardized set of ignore files. The calling scripts established the convention to use .git/info/exclude, .gitignore, and later core.excludesfile. * git-add and git-status know about it because they call add_excludes_from_file() directly with their own notion of which standard set of ignore files to use. This is just a stupid duplication of code that need to be updated every time the definition of the standard set of ignore files is changed. * git-read-tree takes --exclude-per-directory=<gitignore>, not because the flexibility was needed. Again, this was because the option predates the standardization of the ignore files. * git-merge-recursive uses hardcoded per-directory .gitignore and nothing else. git-clean (scripted version) does not honor core.* because its call to underlying ls-files does not know about it. git-clean in C (parked in 'pu') doesn't either. We probably could change git-ls-files to use the standard set when no excludes are specified on the command line and ignore processing was asked, or something like that, but that will be a change in semantics and might break people's scripts in a subtle way. I am somewhat reluctant to make such a change. On the other hand, I think it makes perfect sense to fix git-read-tree, git-merge-recursive and git-clean to follow the same rule as other commands. I do not think of a valid use case to give an exclude-per-directory that is nonstandard to read-tree command, outside a "negative" test in the t1004 test script. This patch is the first step to untangle this mess. The next step would be to teach read-tree, merge-recursive and clean (in C) to use setup_standard_excludes(). Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Johannes Sixt	506b17b136	Introduce git_etc_gitconfig() that encapsulates access of ETC_GITCONFIG. In a subsequent patch the path to the system-wide config file will be computed. This is a preparation for that change. It turns all accesses of ETC_GITCONFIG into function calls. There is no change in behavior. As a consequence, config.c is the only file that needs the definition of ETC_GITCONFIG. Hence, -DETC_GITCONFIG is removed from the CFLAGS and a special build rule for config.c is introduced. As a side-effect, changing the defintion of ETC_GITCONFIG (e.g. in config.mak) does not trigger a complete rebuild anymore. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Johannes Schindelin	4723ee992c	Close files opened by lock_file() before unlinking. This is needed on Windows since open files cannot be unlinked. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	039bc64e88	core.excludesfile clean-up There are inconsistencies in the way commands currently handle the core.excludesfile configuration variable. The problem is the variable is too new to be noticed by anything other than git-add and git-status. * git-ls-files does not notice any of the "ignore" files by default, as it predates the standardized set of ignore files. The calling scripts established the convention to use .git/info/exclude, .gitignore, and later core.excludesfile. * git-add and git-status know about it because they call add_excludes_from_file() directly with their own notion of which standard set of ignore files to use. This is just a stupid duplication of code that need to be updated every time the definition of the standard set of ignore files is changed. * git-read-tree takes --exclude-per-directory=<gitignore>, not because the flexibility was needed. Again, this was because the option predates the standardization of the ignore files. * git-merge-recursive uses hardcoded per-directory .gitignore and nothing else. git-clean (scripted version) does not honor core.* because its call to underlying ls-files does not know about it. git-clean in C (parked in 'pu') doesn't either. We probably could change git-ls-files to use the standard set when no excludes are specified on the command line and ignore processing was asked, or something like that, but that will be a change in semantics and might break people's scripts in a subtle way. I am somewhat reluctant to make such a change. On the other hand, I think it makes perfect sense to fix git-read-tree, git-merge-recursive and git-clean to follow the same rule as other commands. I do not think of a valid use case to give an exclude-per-directory that is nonstandard to read-tree command, outside a "negative" test in the t1004 test script. This patch is the first step to untangle this mess. The next step would be to teach read-tree, merge-recursive and clean (in C) to use setup_standard_excludes(). Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	4bd5b7dacc	ce_match_stat, run_diff_files: use symbolic constants for readability ce_match_stat() can be told: (1) to ignore CE_VALID bit (used under "assume unchanged" mode) and perform the stat comparison anyway; (2) not to perform the contents comparison for racily clean entries and report mismatch of cached stat information; using its "option" parameter. Give them symbolic constants. Similarly, run_diff_files() can be told not to report anything on removed paths. Also give it a symbolic constant for that. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
David Symonds	609a2289d7	Improve accuracy of check for presence of deflateBound. ZLIB_VERNUM isn't defined in some zlib versions, so this patch does a proper linking test in autoconf to see whether deflateBound exists in zlib. Also, setting NO_DEFLATE_BOUND will also work for folk not using autoconf. Signed-off-by: David Symonds <dsymonds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Mike Hommey	59f0f2f33a	Refactor working tree setup Create a setup_work_tree() that can be used from any command requiring a working tree conditionally. Signed-off-by: Mike Hommey <mh@glandium.org> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Daniel Barkalow	4577370e9b	Miscellaneous const changes and utilities The list of remote refs in struct transport should be const, because builtin-fetch will get confused if it changes. The url in git_connect should be const (and work on a copy) instead of requiring the caller to copy it. match_refs doesn't modify the refspecs it gets. get_fetch_map and get_remote_ref don't change the list they get. Allow transport get_refs_list methods to modify the struct transport. Add a function to copy a list of refs, when a function needs a mutable copy of a const list. Add a function to check the type of a ref, as per the code in connect.c Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	459fa6d0fe	git-diff: complain about >=8 consecutive spaces in initial indent This introduces a new whitespace error type, "indent-with-non-tab". The error is about starting a line with 8 or more SP, instead of indenting it with a HT. This is not enabled by default, as some projects employ an indenting policy to use only SPs and no HTs. The kernel folks and git contributors may want to enable this detection with: [core] whitespace = indent-with-non-tab Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	a9cc857ada	War on whitespace: first, a bit of retreat. This introduces core.whitespace configuration variable that lets you specify the definition of "whitespace error". Currently there are two kinds of whitespace errors defined: * trailing-space: trailing whitespaces at the end of the line. * space-before-tab: a SP appears immediately before HT in the indent part of the line. You can specify the desired types of errors to be detected by listing their names (unique abbreviations are accepted) separated by comma. By default, these two errors are always detected, as that is the traditional behaviour. You can disable detection of a particular type of error by prefixing a '-' in front of the name of the error, like this: [core] whitespace = -trailing-space This patch teaches the code to output colored diff with DIFF_WHITESPACE color to highlight the detected whitespace errors to honor the new configuration. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Johannes Sixt	98158e9cfd	Change git_connect() to return a struct child_process instead of a pid_t. This prepares the API of git_connect() and finish_connect() to operate on a struct child_process. Currently, we just use that object as a placeholder for the pid that we used to return. A follow-up patch will change the implementation of git_connect() and finish_connect() to make full use of the object. Old code had early-return-on-error checks at the calling sites of git_connect(), but since git_connect() dies on errors anyway, these checks were removed. [sp: Corrected style nit of "conn == NULL" to "!conn"] Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>	17 years ago
Andy Parkins	856665f827	parse_date_format(): convert a format name to an enum date_mode Factor out the code to parse --date=<format> parameter to revision walkers into a separate function, parse_date_format(). This function is passed a string and converts it to an enum date_format: - "relative" => DATE_RELATIVE - "iso8601" or "iso" => DATE_ISO8601 - "rfc2822" => DATE_RFC2822 - "short" => DATE_SHORT - "local" => DATE_LOCAL - "default" => DATE_NORMAL In the event that none of these strings is found, the function die()s. Signed-off-by: Andy Parkins <andyparkins@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Carlos Rica	102c2338da	Move make_cache_entry() from merge-recursive.c into read-cache.c The function make_cache_entry() is too useful to be hidden away in merge-recursive. So move it to libgit.a (exposing it via cache.h). Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Pierre Habouzit	19247e5510	nfv?asprintf are broken without va_copy, workaround them. * drop nfasprintf. * move nfvasprintf into imap-send.c back, and let it work on a 8k buffer, and die() in case of overflow. It should be enough for imap commands, if someone cares about imap-send, he's welcomed to fix it properly. * replace nfvasprintf use in merge-recursive with a copy of the strbuf_addf logic, it's one place, we'll live with it. To ease the change, output_buffer string list is replaced with a strbuf ;) * rework trace.c to call vsnprintf itself. It's used to format strerror()s and git command names, it should never be more than a few octets long, let it work on a 8k static buffer with vsnprintf or die loudly. Signed-off-by: Pierre Habouzit <madcoder@debian.org>	18 years ago
Daniel Barkalow	b888d61c83	Make fetch a builtin Thanks to Johannes Schindelin for review and fixes, and Julian Phillips for the original C translation. This changes a few small bits of behavior: branch.<name>.merge is parsed as if it were the lhs of a fetch refspec, and does not have to exactly match the actual lhs of a refspec, so long as it is a valid abbreviation for the same ref. branch.<name>.merge is no longer ignored if the remote is configured with a branches/* file. Neither behavior is useful, because there can only be one ref that gets fetched, but this is more consistant. Also, fetch prints different information to standard out. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Junio C Hamano	000dfd3f6e	Export matches_pack_name() and fix its return value The function sounds boolean; make it behave as one, not "0 for success, non-zero for failure". Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Pierre Habouzit	5ecd293d14	Rewrite convert_to_{git,working_tree} to use strbuf's. * Now, those functions take an "out" strbuf argument, where they store their result if any. In that case, it also returns 1, else it returns 0. * those functions support "in place" editing, in the sense that it's OK to call them this way: convert_to_git(path, sb->buf, sb->len, sb); When doable, conversions are done in place for real, else the strbuf content is just replaced with the new one, transparentely for the caller. If you want to create a new filter working this way, being the accumulation of filter1, filter2, ... filtern, then your meta_filter would be: int meta_filter(..., const char src, size_t len, struct strbuf sb) { int ret = 0; ret \|= filter1(...., src, len, sb); if (ret) { src = sb->buf; len = sb->len; } ret \|= filter2(...., src, len, sb); if (ret) { src = sb->buf; len = sb->len; } .... return ret \| filtern(..., src, len, sb); } That's why subfilters the convert_to_* functions called were also rewritten to work this way. Signed-off-by: Pierre Habouzit <madcoder@debian.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Carlos Rica	6640f88165	Move make_cache_entry() from merge-recursive.c into read-cache.c The function make_cache_entry() is too useful to be hidden away in merge-recursive. So move it to libgit.a (exposing it via cache.h). Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Pierre Habouzit	fd17f5b5f7	Replace all read_fd use with strbuf_read, and get rid of it. This brings builtin-stripspace, builtin-tag and mktag to use strbufs. Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
René Scharfe	89b4256cfb	Remove unused function convert_sha1_file() convert_sha1_file() became unused by the previous patch -- remove it. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Junio C Hamano	aecbf914c4	git-diff: resurrect the traditional empty "diff --git" behaviour The warning message to suggest "Consider running git-status" from "git-diff" that we experimented with during the 1.5.3 cycle turns out to be a bad idea. It robbed cache-dirty information from people who valued it, while still asking users to run "update-index --refresh". It was hoped that the new behaviour would at least have some educational value, but not showing the cache-dirty paths like before meant that the user would not even know easily which paths were cache-dirty, and it made the need to refresh the index look like even more unnecessary chore. This commit reinstates the traditional behaviour, but with a twist. By default, the empty "diff --git" output is totally squelched out from "git diff" output. At the end of the command, it automatically runs "update-index --refresh" as needed, without even bothering the user. In other words, people who do not care about the cache-dirtyness do not even have to see the warning. The traditional behaviour to see the stat-dirty output and to bypassing the overhead of content comparison can be specified by setting the configuration variable diff.autorefreshindex to false. Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Alexandre Julliard	d616813d75	git-add: Add support for --refresh option. This allows to refresh only a subset of the project files, based on the specified pathspecs. Signed-off-by: Alexandre Julliard <julliard@winehq.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Junio C Hamano	af3785dc5a	Optimize "diff --cached" performance. The read_tree() function is called only from the call chain to run "git diff --cached" (this includes the internal call made by git-runstatus to run_diff_index()). The function vacates stage without any funky "merge" magic. The caller then goes and compares stage #1 entries from the tree with stage #0 entries from the original index. When adding the cache entries this way, it used the general purpose add_cache_entry(). This function looks for an existing entry to replace or if there is none to find where to insert the new entry, resolves D/F conflict and all the other things. For the purpose of reading entries into an empty stage, none of that processing is needed. We can instead append everything and then sort the result at the end. This commit changes read_tree() to first make sure that there is no existing cache entries at specified stage, and if that is the case, it runs add_cache_entry() with ADD_CACHE_JUST_APPEND flag (new), and then sort the resulting cache using qsort(). This new flag tells add_cache_entry() to omit all the checks such as "Does this path already exist? Does adding this path remove other existing entries because it turns a directory to a file?" and instead append the given cache entry straight at the end of the active cache. The caller of course is expected to sort the resulting cache at the end before using the result. Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Johannes Schindelin	e90fdc39b6	Clean up work-tree handling The old version of work-tree support was an unholy mess, barely readable, and not to the point. For example, why do you have to provide a worktree, when it is not used? As in "git status". Now it works. Another riddle was: if you can have work trees inside the git dir, why are some programs complaining that they need a work tree? IOW it is allowed to call $ git --git-dir=../ --work-tree=. bla when you really want to. In this case, you are both in the git directory and in the working tree. So, programs have to actually test for the right thing, namely if they are inside a working tree, and not if they are inside a git directory. Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was specified, unless there is a repository in the current working directory. It does now. The logic to determine if a repository is bare, or has a work tree (tertium non datur), is this: --work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true, which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR ends in /.git, which overrides the directory in which .git/ was found. In related news, a long standing bug was fixed: when in .git/bla/x.git/, which is a bare repository, git formerly assumed ../.. to be the appropriate git dir. This problem was reported by Shawn Pearce to have caused much pain, where a colleague mistakenly ran "git init" in "/" a long time ago, and bare repositories just would not work. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Johannes Schindelin	d7ac12b25d	Add set_git_dir() function With the function set_git_dir() you can reset the path that will be used for git_path(), git_dir() and friends. The responsibility to close files and throw away information from the old git_dir lies with the caller. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago

... 3 4 5 6 7 ...

739 Commits (d0b16c8f878bef5c1268e033a3d1f427498c7008)