Introduce a new `--ref-format` value flag for git-clone(1) that allows
the user to specify the ref format that is to be used for a newly
initialized repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "extensions.refStorage" extension that allows us to
specify the ref storage format used by a repository. For now, the only
supported format is the "files" format, but this list will likely soon
be extended to also support the upcoming "reftable" format.
There have been discussions on the Git mailing list in the past around
how exactly this extension should look like. One alternative [1] that
was discussed was whether it would make sense to model the extension in
such a way that backends are arbitrarily stackable. This would allow for
a combined value of e.g. "loose,packed-refs" or "loose,reftable", which
indicates that new refs would be written via "loose" files backend and
compressed into "packed-refs" or "reftable" backends, respectively.
It is arguable though whether this flexibility and the complexity that
it brings with it is really required for now. It is not foreseeable that
there will be a proliferation of backends in the near-term future, and
the current set of existing formats and formats which are on the horizon
can easily be configured with the much simpler proposal where we have a
single value, only.
Furthermore, if we ever see that we indeed want to gain the ability to
arbitrarily stack the ref formats, then we can adapt the current
extension rather easily. Given that Git clients will refuse any unknown
value for the "extensions.refStorage" extension they would also know to
ignore a stacked "loose,packed-refs" in the future.
So let's stick with the easy proposal for the time being and wire up the
extension.
[1]: <pull.1408.git.1667846164.gitgitgadget@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to discern which ref storage format a repository is supposed to
use we need to start setting up and/or discovering the format. This
needs to happen in two separate code paths.
- The first path is when we create a repository via `init_db()`. When
we are re-initializing a preexisting repository we need to retain
the previously used ref storage format -- if the user asked for a
different format then this indicates an error and we error out.
Otherwise we either initialize the repository with the format asked
for by the user or the default format, which currently is the
"files" backend.
- The second path is when discovering repositories, where we need to
read the config of that repository. There is not yet any way to
configure something other than the "files" backend, so we can just
blindly set the ref storage format to this backend.
Wire up this logic so that we have the ref storage format always readily
available when needed. As there is only a single backend and because it
is not configurable we cannot yet verify that this tracking works as
expected via tests, but tests will be added in subsequent commits. To
countermand this ommission now though, raise a BUG() in case the ref
storage format is not set up properly in `ref_store_init()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" has been prepared to allow cloning a repository with
non-default hash function into a repository that uses the reftable
backend.
* ps/clone-into-reftable-repository:
builtin/clone: create the refdb with the correct object format
builtin/clone: skip reading HEAD when retrieving remote
builtin/clone: set up sparse checkout later
builtin/clone: fix bundle URIs with mismatching object formats
remote-curl: rediscover repository when fetching refs
setup: allow skipping creation of the refdb
setup: extract function to create the refdb
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ps/clone-into-reftable-repository:
builtin/clone: create the refdb with the correct object format
builtin/clone: skip reading HEAD when retrieving remote
builtin/clone: set up sparse checkout later
builtin/clone: fix bundle URIs with mismatching object formats
remote-curl: rediscover repository when fetching refs
setup: allow skipping creation of the refdb
setup: extract function to create the refdb
Some codepaths did not correctly parse configuration variables
specified with valueless "true", which has been corrected.
* jk/implicit-true:
fsck: handle NULL value when parsing message config
trailer: handle NULL value when parsing trailer-specific config
submodule: handle NULL value when parsing submodule.*.branch
help: handle NULL value for alias.* config
trace2: handle NULL values in tr2_sysenv config callback
setup: handle NULL value when parsing extensions
config: handle NULL value when parsing non-bools
We're currently creating the reference database with a potentially
incorrect object format when the remote repository's object format is
different from the local default object format. This works just fine for
now because the files backend never records the object format anywhere.
But this logic will fail with any new reference backend that encodes
this information in some form either on-disk or in-memory.
The preceding commits have reshuffled code in git-clone(1) so that there
is no code path that will access the reference database before we have
detected the remote's object format. With these refactorings we can now
defer initialization of the reference database until after we have
learned the remote's object format and thus initialize it with the
correct format from the get-go.
These refactorings are required to make git-clone(1) work with the
upcoming reftable backend when cloning repositories with the SHA256
object format.
This change breaks a test in "t5550-http-fetch-dumb.sh" when cloning an
empty repository with `GIT_TEST_DEFAULT_HASH=sha256`. The test expects
the resulting hash format of the empty cloned repository to match the
default hash, but now we always end up with a sha1 repository. The
problem is that for dumb HTTP fetches, we have no easy way to figure out
the remote's hash function except for deriving it based on the hash
length of refs in `info/refs`. But as the remote repository is empty we
cannot rely on this detection mechanism.
Before the change in this commit we already initialized the repository
with the default hash function and then left it as-is. With this patch
we always use the hash function detected via the remote, where we fall
back to "sha1" in case we cannot detect it.
Neither the old nor the new behaviour are correct as we second-guess the
remote hash function in both cases. But given that this is a rather
unlikely edge case (we use the dumb HTTP protocol, the remote repository
uses SHA256 and the remote repository is empty), let's simply adapt the
test to assert the new behaviour. If we want to properly address this
edge case in the future we will have to extend the dumb HTTP protocol so
that we can properly detect the hash function for empty repositories.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After we have set up the remote configuration in git-clone(1) we'll call
`remote_get()` to read the remote from the on-disk configuration. But
next to reading the on-disk configuration, `remote_get()` will also
cause us to try and read the repository's HEAD reference so that we can
figure out the current branch. Besides being pointless in git-clone(1)
because we're operating in an empty repository anyway, this will also
break once we move creation of the reference database to a later point
in time.
Refactor the code to introduce a new `remote_get_early()` function that
will skip reading the HEAD reference to address this issue.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When asked to do a sparse checkout, then git-clone(1) will spawn
`git sparse-checkout set` to set up the configuration accordingly. This
requires a proper Git repository or otherwise the command will fail. But
as we are about to move creation of the reference database to a later
point, this prerequisite will not hold anymore.
Move the logic to a later point in time where we know to have created
the reference database already.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We create the reference database in git-clone(1) quite early before
connecting to the remote repository. Given that we do not yet know about
the object format that the remote repository uses at that point in time
the consequence is that the refdb may be initialized with the wrong
object format.
This is not a problem in the context of the files backend as we do not
encode the object format anywhere, and furthermore the only reference
that we write between initializing the refdb and learning about the
object format is the "HEAD" symref. It will become a problem though once
we land the reftable backend, which indeed does require to know about
the proper object format at the time of creation. We thus need to
rearrange the logic in git-clone(1) so that we only initialize the refdb
once we have learned about the actual object format.
As a first step, move listing of remote references to happen earlier,
which also allow us to set up the hash algorithm of the repository
earlier now. While we aim to execute this logic as late as possible
until after most of the setup has happened already, detection of the
object format and thus later the setup of the reference database must
happen before any other logic that may spawn Git commands or otherwise
these Git commands may not recognize the repository as such.
The first Git step where we expect the repository to be fully initalized
is when we fetch bundles via bundle URIs. Funny enough, the comments
there also state that "the_repository must match the cloned repo", which
is indeed not necessarily the case for the hash algorithm right now. So
in practice it is the right thing to detect the remote's object format
before downloading bundle URIs anyway, and not doing so causes clones
with bundle URIs to fail when the local default object format does not
match the remote repository's format.
Unfortunately though, this creates a new issue: downloading bundles may
take a long time, so if we list refs beforehand they might've grown
stale meanwhile. It is not clear how to solve this issue except for a
second reference listing though after we have downloaded the bundles,
which may be an expensive thing to do.
Arguably though, it's preferable to have a staleness issue compared to
being unable to clone a repository altogether.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the config parser sees an "implicit" bool like:
[core]
someVariable
it passes NULL to the config callback. Any callback code which expects a
string must check for NULL. This usually happens via helpers like
git_config_string(), etc, but some custom code forgets to do so and will
segfault.
These are all fairly vanilla cases where the solution is just the usual
pattern of:
if (!value)
return config_error_nonbool(var);
though note that in a few cases we have to split initializers like:
int some_var = initializer();
into:
int some_var;
if (!value)
return config_error_nonbool(var);
some_var = initializer();
There are still some broken instances after this patch, which I'll
address on their own in individual patches after this one.
Reported-by: Carlos Andrés Ramírez Cataño <antaigroupltda@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue the work of 12909b6b8a (i18n: turn "options are incompatible"
into "cannot be used together", 2022-01-05) and a699367bb8 (i18n:
factorize more 'incompatible options' messages, 2022-01-31) to use the
same parameterized error message for reporting incompatible command line
options. This reduces the number of strings to translate and makes the
UI slightly more consistent.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make it possible for git ls-tree to display the tree encoded
in the hash algorithm of the oid specified to git ls-tree, update
init_tree_desc to take as a parameter the oid of the tree object.
Update all callers of init_tree_desc and init_tree_desc_gently
to pass the oid of the tree object.
Use the oid of the tree object to discover the hash algorithm
of the oid and store that hash algorithm in struct tree_desc.
Use the hash algorithm in decode_tree_entry and
update_tree_entry_internal to handle reading a tree object encoded in
a hash algorithm that differs from the repositories hash algorithm.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line option parsing for "git clone", "git fetch", and
"git push" have duplicated implementations of parsing "--ipv4" and
"--ipv6" options, by having two OPT_SET_INT() for "ipv4" and "ipv6".
Introduce a new OPT_IPVERSION() macro and use it in these three
commands.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further shuffling of declarations across header files to streamline
file dependencies.
* cw/compat-util-header-cleanup:
git-compat-util: move alloc macros to git-compat-util.h
treewide: remove unnecessary includes for wrapper.h
kwset: move translation table from ctype
sane-ctype.h: create header for sane-ctype macros
git-compat-util: move wrapper.c funcs to its header
git-compat-util: move strbuf.c funcs to its header
Reduce reliance on a global state in the config reading API.
* gc/config-context:
config: pass source to config_parser_event_fn_t
config: add kvi.path, use it to evaluate includes
config.c: remove config_reader from configsets
config: pass kvi to die_bad_number()
trace2: plumb config kvi
config.c: pass ctx with CLI config
config: pass ctx with config files
config.c: pass ctx in configsets
config: add ctx arg to config_fn_t
urlmatch.h: use config_fn_t type
config: inline git_color_default_config
Add a new "const struct config_context *ctx" arg to config_fn_t to hold
additional information about the config iteration operation.
config_context has a "struct key_value_info kvi" member that holds
metadata about the config source being read (e.g. what kind of config
source it is, the filename, etc). In this series, we're only interested
in .kvi, so we could have just used "struct key_value_info" as an arg,
but config_context makes it possible to add/adjust members in the future
without changing the config_fn_t signature. We could also consider other
ways of organizing the args (e.g. moving the config name and value into
config_context or key_value_info), but in my experiments, the
incremental benefit doesn't justify the added complexity (e.g. a
config_fn_t will sometimes invoke another config_fn_t but with a
different config value).
In subsequent commits, the .kvi member will replace the global "struct
config_reader" in config.c, making config iteration a global-free
operation. It requires much more work for the machinery to provide
meaningful values of .kvi, so for now, merely change the signature and
call sites, pass NULL as a placeholder value, and don't rely on the arg
in any meaningful way.
Most of the changes are performed by
contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every
config_fn_t:
- Modifies the signature to accept "const struct config_context *ctx"
- Passes "ctx" to any inner config_fn_t, if needed
- Adds UNUSED attributes to "ctx", if needed
Most config_fn_t instances are easily identified by seeing if they are
called by the various config functions. Most of the remaining ones are
manually named in the .cocci patch. Manual cleanups are still needed,
but the majority of it is trivial; it's either adjusting config_fn_t
that the .cocci patch didn't catch, or adding forward declarations of
"struct config_context ctx" to make the signatures make sense.
The non-trivial changes are in cases where we are invoking a config_fn_t
outside of config machinery, and we now need to decide what value of
"ctx" to pass. These cases are:
- trace2/tr2_cfg.c:tr2_cfg_set_fl()
This is indirectly called by git_config_set() so that the trace2
machinery can notice the new config values and update its settings
using the tr2 config parsing function, i.e. tr2_cfg_cb().
- builtin/checkout.c:checkout_main()
This calls git_xmerge_config() as a shorthand for parsing a CLI arg.
This might be worth refactoring away in the future, since
git_xmerge_config() can call git_default_config(), which can do much
more than just parsing.
Handle them by creating a KVI_INIT macro that initializes "struct
key_value_info" to a reasonable default, and use that to construct the
"ctx" arg.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also made it clear that several .c files that depended upon path.h
were missing a #include for it; add the missing includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much like the parent commit, this commit was prompted by a desire to
move the functions which builtin/init-db.c and builtin/clone.c share out
of the former file and into setup.c. A secondary issue that made it
difficult was the init_shared_repository global variable; replace it
with a simple parameter that is passed to the relevant functions.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More header clean-up.
* en/header-split-cache-h-part-2: (22 commits)
reftable: ensure git-compat-util.h is the first (indirect) include
diff.h: reduce unnecessary includes
object-store.h: reduce unnecessary includes
commit.h: reduce unnecessary includes
fsmonitor: reduce includes of cache.h
cache.h: remove unnecessary headers
treewide: remove cache.h inclusion due to previous changes
cache,tree: move basic name compare functions from read-cache to tree
cache,tree: move cmp_cache_name_compare from tree.[ch] to read-cache.c
hash-ll.h: split out of hash.h to remove dependency on repository.h
tree-diff.c: move S_DIFFTREE_IFXMIN_NEQ define from cache.h
dir.h: move DTYPE defines from cache.h
versioncmp.h: move declarations for versioncmp.c functions from cache.h
ws.h: move declarations for ws.c functions from cache.h
match-trees.h: move declarations for match-trees.c functions from cache.h
pkt-line.h: move declarations for pkt-line.c functions from cache.h
base85.h: move declarations for base85.c functions from cache.h
copy.h: move declarations for copy.c functions from cache.h
server-info.h: move declarations for server-info.c functions from cache.h
packfile.h: move pack_window and pack_entry from cache.h
...
Header clean-up.
* en/header-split-cache-h: (24 commits)
protocol.h: move definition of DEFAULT_GIT_PORT from cache.h
mailmap, quote: move declarations of global vars to correct unit
treewide: reduce includes of cache.h in other headers
treewide: remove double forward declaration of read_in_full
cache.h: remove unnecessary includes
treewide: remove cache.h inclusion due to pager.h changes
pager.h: move declarations for pager.c functions from cache.h
treewide: remove cache.h inclusion due to editor.h changes
editor: move editor-related functions and declarations into common file
treewide: remove cache.h inclusion due to object.h changes
object.h: move some inline functions and defines from cache.h
treewide: remove cache.h inclusion due to object-file.h changes
object-file.h: move declarations for object-file.c functions from cache.h
treewide: remove cache.h inclusion due to git-zlib changes
git-zlib: move declarations for git-zlib functions from cache.h
treewide: remove cache.h inclusion due to object-name.h changes
object-name.h: move declarations for object-name.c functions from cache.h
treewide: remove unnecessary cache.h inclusion
treewide: be explicit about dependence on mem-pool.h
treewide: be explicit about dependence on oid-array.h
...
"git clone --local" stops copying from an original repository that
has symbolic links inside its $GIT_DIR; an error message when that
happens has been updated.
* gc/better-error-when-local-clone-fails-with-symlink:
clone: error specifically with --local and symlinked objects
"git clone" from an empty repository learned to propagate the
choice of the hash algorithm from the source repository to the
newly created repository.
* jc/clone-object-format-from-void:
clone: propagate object-format when cloning from void
cache.h's nature of a dumping ground of includes prevented it from
being included in some compat/ files, forcing us into a workaround
of having a double forward declaration of the read_in_full() function
(see commit 14086b0a13 ("compat/pread.c: Add a forward declaration to
fix a warning", 2007-11-17)). Now that we have moved functions like
read_in_full() from cache.h to wrapper.h, and wrapper.h isn't littered
with unrelated and scary #defines, get rid of the extra forward
declaration and just have compat/pread.c include wrapper.h.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of advice functions, without explicitly
including advice.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
advice.h if they are using it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6f054f9fb3 (builtin/clone.c: disallow --local clones with
symlinks, 2022-07-28) gives a good error message when "git clone
--local" fails when the repo to clone has symlinks in
"$GIT_DIR/objects". In bffc762f87 (dir-iterator: prevent top-level
symlinks without FOLLOW_SYMLINKS, 2023-01-24), we later extended this
restriction to the case where "$GIT_DIR/objects" is itself a symlink,
but we didn't update the error message then - bffc762f87's tests show
that we print a generic "failed to start iterator over" message.
This is exacerbated by the fact that Documentation/git-clone.txt
mentions neither restriction, so users are left wondering if this is
intentional behavior or not.
Fix this by adding a check to builtin/clone.c: when doing a local clone,
perform an extra check to see if "$GIT_DIR/objects" is a symlink, and if
so, assume that that was the reason for the failure and report the
relevant information. Ideally, dir_iterator_begin() would tell us that
the real failure reason is the presence of the symlink, but (as far as I
can tell) there isn't an appropriate errno value for that.
Also, update Documentation/git-clone.txt to reflect that this
restriction exists.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split key function and data structure definitions out of cache.h to
new header files and adjust the users.
* en/header-split-cleanup:
csum-file.h: remove unnecessary inclusion of cache.h
write-or-die.h: move declarations for write-or-die.c functions from cache.h
treewide: remove cache.h inclusion due to setup.h changes
setup.h: move declarations for setup.c functions from cache.h
treewide: remove cache.h inclusion due to environment.h changes
environment.h: move declarations for environment.c functions from cache.h
treewide: remove unnecessary includes of cache.h
wrapper.h: move declarations for wrapper.c functions from cache.h
path.h: move function declarations for path.c functions from cache.h
cache.h: remove expand_user_path()
abspath.h: move absolute path functions from cache.h
environment: move comment_line_char from cache.h
treewide: remove unnecessary cache.h inclusion from several sources
treewide: remove unnecessary inclusion of gettext.h
treewide: be explicit about dependence on gettext.h
treewide: remove unnecessary cache.h inclusion from a few headers
Code clean-up around the use of the_repository.
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
A user could prepare an empty repository and set it to use SHA256 as
the object format. The new repository created by "git clone" from
such a repository however would not record that it is expecting
objects in the same SHA256 format. This works as expected if the
source repository is not empty.
Just like we started copying the name of the primary branch from the
remote repository even if it is unborn in 3d8314f8 (clone: propagate
empty remote HEAD even with other branches, 2022-07-07), lift the
code that records the object format out of the block executed only
when cloning from an instantiated repository, so that it works also
when cloning from an empty repository.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Apply the part of "the_repository.pending.cocci" pertaining to
"object-store.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is another step towards letting us remove the include of cache.h in
strbuf.c. It does mean that we also need to add includes of abspath.h
in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leak fixes.
* ab/various-leak-fixes:
push: free_refs() the "local_refs" in set_refspecs()
push: refactor refspec_append_mapped() for subsequent leak-fix
receive-pack: release the linked "struct command *" list
grep API: plug memory leaks by freeing "header_list"
grep.c: refactor free_grep_patterns()
builtin/merge.c: free "&buf" on "Your local changes..." error
builtin/merge.c: use fixed strings, not "strbuf", fix leak
show-branch: free() allocated "head" before return
commit-graph: fix a parse_options_concat() leak
http-backend.c: fix cmd_main() memory leak, refactor reg{exec,free}()
http-backend.c: fix "dir" and "cmd_arg" leaks in cmd_main()
worktree: fix a trivial leak in prune_worktrees()
repack: fix leaks on error with "goto cleanup"
name-rev: don't xstrdup() an already dup'd string
various: add missing clear_pathspec(), fix leaks
clone: use free() instead of UNLEAK()
commit-graph: use free_commit_graph() instead of UNLEAK()
bundle.c: don't leak the "args" in the "struct child_process"
tests: mark tests as passing with SANITIZE=leak
The bundle-URI subsystem adds support for creation-token heuristics
to help incremental fetches.
* ds/bundle-uri-5:
bundle-uri: test missing bundles with heuristic
bundle-uri: store fetch.bundleCreationToken
fetch: fetch from an external bundle URI
bundle-uri: drop bundle.flag from design doc
clone: set fetch.bundleURI if appropriate
bundle-uri: download in creationToken order
bundle-uri: parse bundle.<id>.creationToken values
bundle-uri: parse bundle.heuristic=creationToken
t5558: add tests for creationToken heuristic
bundle: verify using check_connected()
bundle: test unbundling with incomplete history
Change an UNLEAK() added in 0c4542738e (clone: free or UNLEAK further
pointers when finished, 2021-03-14) to use a "to_free" pattern
instead. In this case the "repo" can be either this absolute_pathdup()
value, or in the "else if" branch seen in the context the the
"argv[0]" argument to "main()".
We can only free() the value in the former case, hence the "to_free"
pattern.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.35:
Git 2.35.7
Git 2.34.7
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.34:
Git 2.34.7
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.33:
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.32:
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.31:
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.30:
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
Bundle providers may organize their bundle lists in a way that is
intended to improve incremental fetches, not just initial clones.
However, they do need to state that they have organized with that in
mind, or else the client will not expect to save time by downloading
bundles after the initial clone. This is done by specifying a
bundle.heuristic value.
There are two types of bundle lists: those at a static URI and those
that are advertised from a Git remote over protocol v2.
The new fetch.bundleURI config value applies for static bundle URIs that
are not advertised over protocol v2. If the user specifies a static URI
via 'git clone --bundle-uri', then Git can set this config as a reminder
for future 'git fetch' operations to check the bundle list before
connecting to the remote(s).
For lists provided over protocol v2, we will want to take a different
approach and create a property of the remote itself by creating a
remote.<id>.* type config key. That is not implemented in this change.
Later changes will update 'git fetch' to consume this option.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, t5619 demonstrates an issue where two calls to
`get_repo_path()` could trick Git into using its local clone mechanism
in conjunction with a non-local transport.
That sequence is:
- the starting state is that the local path https:/example.com/foo is a
symlink that points to ../../../.git/modules/foo. So it's dangling.
- get_repo_path() sees that no such path exists (because it's
dangling), and thus we do not canonicalize it into an absolute path
- because we're using --separate-git-dir, we create .git/modules/foo.
Now our symlink is no longer dangling!
- we pass the url to transport_get(), which sees it as an https URL.
- we call get_repo_path() again, on the url. This second call was
introduced by f38aa83f9a (use local cloning if insteadOf makes a
local URL, 2014-07-17). The idea is that we want to pull the url
fresh from the remote.c API, because it will apply any aliases.
And of course now it sees that there is a local file, which is a
mismatch with the transport we already selected.
The issue in the above sequence is calling `transport_get()` before
deciding whether or not the repository is indeed local, and not passing
in an absolute path if it is local.
This is reminiscent of a similar bug report in [1], where it was
suggested to perform the `insteadOf` lookup earlier. Taking that
approach may not be as straightforward, since the intent is to store the
original URL in the config, but to actually fetch from the insteadOf
one, so conflating the two early on is a non-starter.
Note: we pass the path returned by `get_repo_path(remote->url[0])`,
which should be the same as `repo_name` (aside from any `insteadOf`
rewrites).
We *could* pass `absolute_pathdup()` of the same argument, which
86521acaca (Bring local clone's origin URL in line with that of a remote
clone, 2008-09-01) indicates may differ depending on the presence of
".git/" for a non-bare repo. That matters for forming relative submodule
paths, but doesn't matter for the second call, since we're just feeding
it to the transport code, which is fine either way.
[1]: https://lore.kernel.org/git/CAMoD=Bi41mB3QRn3JdZL-FGHs4w3C2jGpnJB-CqSndO7FMtfzA@mail.gmail.com/
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bundle URIs part 4.
* ds/bundle-uri-4:
clone: unbundle the advertised bundles
bundle-uri: download bundles from an advertised list
bundle-uri: allow relative URLs in bundle lists
strbuf: introduce strbuf_strip_file_from_path()
bundle-uri: serve bundle.* keys from config
bundle-uri client: add helper for testing server
transport: rename got_remote_heads
bundle-uri client: add boolean transfer.bundleURI setting
clone: request the 'bundle-uri' command when available
t: create test harness for 'bundle-uri' command
protocol v2: add server-side "bundle-uri" skeleton
A previous change introduced the transport methods to acquire a bundle
list from the 'bundle-uri' protocol v2 command, when advertised _and_
when the client has chosen to enable the feature.
Teach Git to download and unbundle the data advertised by those bundles
during 'git clone'. This takes place between the ref advertisement and
the object data download, and stateful connections will linger while
the client downloads bundles. In the future, we should consider closing
the remote connection during this process.
Also, since the --bundle-uri option exists, we do not want to mix the
advertised bundles with the user-specified bundles.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set up all the needed client parts of the 'bundle-uri' protocol v2
command, without actually doing anything with the bundle URIs.
If the server says it supports 'bundle-uri' teach Git to issue the
'bundle-uri' command after the 'ls-refs' during 'git clone'. The
returned key=value pairs are passed to the bundle list code which is
tested using a different ingest mechanism in t5750-bundle-uri-parse.sh.
At this point, Git does nothing with that bundle list. It will not
download any of the bundles. That will come in a later change after
these protocol bits are finalized.
The no-op client is initially used only by 'git clone' to test the basic
functionality, and eventually will bootstrap the initial download of Git
objects during a fresh clone. The bundle URI client will not be
integrated into other fetches until a mechanism is created to select a
subset of bundles for download.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply "index-compatibility.pending.cocci" rule to "builtin/*", but
exclude those where we conflict with in-flight changes.
As a result some of them end up using only "the_index", so let's have
them use the more narrow "USE_THE_INDEX_VARIABLE" rather than
"USE_THE_INDEX_COMPATIBILITY_MACROS".
Manual changes not made by coccinelle, that were squashed in:
* Whitespace-wrap argument lists for repo_hold_locked_index(),
repo_read_index_preload() and repo_refresh_and_write_index(), in cases
where the line became too long after the transformation.
* Change "refresh_cache()" to "refresh_index()" in a comment in
"builtin/update-index.c".
* For those whose call was followed by perror("<macro-name>"), change
it to perror("<function-name>"), referring to the new function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the remaining calls of run_command_v_opt() with run_command()
calls and explict struct child_process variables. This is more verbose,
but not by much overall. The code becomes more flexible, e.g. it's easy
to extend to conditionally add a new argument.
Then remove the now unused function and its own flag names, simplifying
the run-command API.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Build argument list and environment of child processes by using
struct child_process and populating its members "args" and "env"
directly instead of maintaining separate strvecs and letting
run_command_v_opt() and friends populate these members. This is
simpler, shorter and slightly more efficient.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
"git clone" did not like to see the "--bare" and the "--origin"
options used together without a good reason.
* jk/clone-allow-bare-and-o-together:
clone: allow "--bare" with "-o"
"git clone" did not like to see the "--bare" and the "--origin"
options used together without a good reason.
* jk/clone-allow-bare-and-o-together:
clone: allow "--bare" with "-o"
When cloning a repository with `--local`, Git relies on either making a
hardlink or copy to every file in the "objects" directory of the source
repository. This is done through the callpath `cmd_clone()` ->
`clone_local()` -> `copy_or_link_directory()`.
The way this optimization works is by enumerating every file and
directory recursively in the source repository's `$GIT_DIR/objects`
directory, and then either making a copy or hardlink of each file. The
only exception to this rule is when copying the "alternates" file, in
which case paths are rewritten to be absolute before writing a new
"alternates" file in the destination repo.
One quirk of this implementation is that it dereferences symlinks when
cloning. This behavior was most recently modified in 36596fd2df (clone:
better handle symlinked files at .git/objects/, 2019-07-10), which
attempted to support `--local` clones of repositories with symlinks in
their objects directory in a platform-independent way.
Unfortunately, this behavior of dereferencing symlinks (that is,
creating a hardlink or copy of the source's link target in the
destination repository) can be used as a component in attacking a
victim by inadvertently exposing the contents of file stored outside of
the repository.
Take, for example, a repository that stores a Dockerfile and is used to
build Docker images. When building an image, Docker copies the directory
contents into the VM, and then instructs the VM to execute the
Dockerfile at the root of the copied directory. This protects against
directory traversal attacks by copying symbolic links as-is without
dereferencing them.
That is, if a user has a symlink pointing at their private key material
(where the symlink is present in the same directory as the Dockerfile,
but the key itself is present outside of that directory), the key is
unreadable to a Docker image, since the link will appear broken from the
container's point of view.
This behavior enables an attack whereby a victim is convinced to clone a
repository containing an embedded submodule (with a URL like
"file:///proc/self/cwd/path/to/submodule") which has a symlink pointing
at a path containing sensitive information on the victim's machine. If a
user is tricked into doing this, the contents at the destination of
those symbolic links are exposed to the Docker image at runtime.
One approach to preventing this behavior is to recreate symlinks in the
destination repository. But this is problematic, since symlinking the
objects directory are not well-supported. (One potential problem is that
when sharing, e.g. a "pack" directory via symlinks, different writers
performing garbage collection may consider different sets of objects to
be reachable, enabling a situation whereby garbage collecting one
repository may remove reachable objects in another repository).
Instead, prohibit the local clone optimization when any symlinks are
present in the `$GIT_DIR/objects` directory of the source repository.
Users may clone the repository again by prepending the "file://" scheme
to their clone URL, or by adding the `--no-local` option to their `git
clone` invocation.
The directory iterator used by `copy_or_link_directory()` must no longer
dereference symlinks (i.e., it *must* call `lstat()` instead of `stat()`
in order to discover whether or not there are symlinks present). This has
no bearing on the overall behavior, since we will immediately `die()` on
encounter a symlink.
Note that t5604.33 suggests that we do support local clones with
symbolic links in the source repository's objects directory, but this
was likely unintentional, or at least did not take into consideration
the problem with sharing parts of the objects directory with symbolic
links at the time. Update this test to reflect which options are and
aren't supported.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
We explicitly forbid the combination of "--bare" with "-o", but there
doesn't seem to be any good reason to do so. The original logic came as
part of e6489a1bdf (clone: do not accept more than one -o option.,
2006-01-22), but that commit does not give any reason.
Furthermore, the equivalent combination via config is allowed:
git -c clone.defaultRemoteName=foo clone ...
and works as expected. It may be that this combination was considered
useless, because a bare clone does not set remote.origin.fetch (and
hence there is no refs/remotes/origin hierarchy). But it does set
remote.origin.url, and that name is visible to the user via "git fetch
origin", etc.
Let's allow the options to be used together, and switch the "forbid"
test in t5606 to check that we use the requested name. That test came
much later in 349cff76de (clone: add tests for --template and some
disallowed option pairs, 2020-09-29), and does not offer any logic
beyond "let's test what the code currently does".
Reported-by: John A. Leuenhagen <john@zlima12.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of bugfixes with code clean-up.
* jk/list-objects-filter-cleanup:
list-objects-filter: convert filter_spec to a strbuf
list-objects-filter: add and use initializers
list-objects-filter: handle null default filter spec
list-objects-filter: don't memset after releasing filter struct
In 7e2619d8ff (list_objects_filter_options: plug leak of filter_spec
strings, 2022-09-08), we noted that the filter_spec string_list was
inconsistent in how it handled memory ownership of strings stored in the
list. The fix there was a bit of a band-aid to set the "strdup_strings"
variable right before adding anything.
That works OK, and it lets the users of the API continue to
zero-initialize the struct. But it makes the code a bit hard to follow
and accident-prone, as any other spots appending the filter_spec need to
think about whether to set the strdup_strings value, too (there's one
such spot in partial_clone_get_default_filter_spec(), which is probably
a possible memory leak).
So let's do that full cleanup now. We'll introduce a
LIST_OBJECTS_FILTER_INIT macro and matching function, and use them as
appropriate (though it is for the "_options" struct, this matches the
corresponding list_objects_filter_release() function).
This is harder than it seems! Many other structs, like
git_transport_data, embed the filter struct. So they need to initialize
it themselves even if the rest of the enclosing struct is OK with
zero-initialization. I found all of the relevant spots by grepping
manually for declarations of list_objects_filter_options. And then doing
so recursively for structs which embed it, and ones which embed those,
and so on.
I'm pretty sure I got everything, but there's no change that would alert
the compiler if any topics in flight added new declarations. To catch
this case, we now double-check in the parsing function that things were
initialized as expected and BUG() if appropriate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --bundle-uri option was added in 5556891961 (clone: add
--bundle-uri option, 2022-08-09), but this also introduced a call to
repo_init() whose return value was ignored. Fix that ignored value by
warning that the bundle URI process could not continue if it failed.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous change added the '--bundle-uri' option, but did not check
if the --depth parameter was included. Since bundles are not compatible
with shallow clones, provide an error message to the user who is
attempting this combination.
I am leaving this as its own change, separate from the one that
implements '--bundle-uri', because this is more of an advisory for the
user. There is nothing wrong with bootstrapping with bundles and then
fetching a shallow clone. However, that is likely going to involve too
much work for the client _and_ the server. The client will download all
of this bundle information containing the full history of the
repository only to ignore most of it. The server will get a shallow
fetch request, but with a list of haves that might cause a more painful
computation of that shallow pack-file.
Reviewed-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cloning a remote repository is one of the most expensive operations in
Git. The server can spend a lot of CPU time generating a pack-file for
the client's request. The amount of data can clog the network for a long
time, and the Git protocol is not resumable. For users with poor network
connections or are located far away from the origin server, this can be
especially painful.
Add a new '--bundle-uri' option to 'git clone' to bootstrap a clone from
a bundle. If the user is aware of a bundle server, then they can tell
Git to bootstrap the new repository with these bundles before fetching
the remaining objects from the origin server.
Reviewed-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" from a repository with some ref whose HEAD is unborn
did not set the HEAD in the resulting repository correctly, which
has been corrected.
source: <YsdyLS4UFzj0j/wB@coredump.intra.peff.net>
* jk/clone-unborn-confusion:
clone: move unborn head creation to update_head()
clone: use remote branch if it matches default HEAD
clone: propagate empty remote HEAD even with other branches
clone: drop extra newline from warning message
"git clone" from a repository with some ref whose HEAD is unborn
did not set the HEAD in the resulting repository correctly, which
has been corrected.
* jk/clone-unborn-confusion:
clone: move unborn head creation to update_head()
clone: use remote branch if it matches default HEAD
clone: propagate empty remote HEAD even with other branches
clone: drop extra newline from warning message
Prior to 4f37d45706 (clone: respect remote unborn HEAD, 2021-02-05),
creation of the local HEAD was always done in update_head(). That commit
added code to handle an unborn head in an empty repository, and just did
all symref creation and config setup there.
This makes the code flow a little bit confusing, especially as new
corner cases have been covered (like the previous commit to match our
default branch name to a non-HEAD remote branch).
Let's move the creation of the unborn symref into update_head(). This
matches the other HEAD-creation cases, and now the logic is consistently
separated: the main cmd_clone() function only examines the situation and
sets variables based on what it finds, and update_head() actually
performs the update.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually clone tries to use the same local HEAD as the remote (unless the
user has given --branch explicitly). Even if the remote HEAD is detached
or unborn, we can detect those situations with modern versions of Git.
If the remote is too old to support the "unborn" extension (or it has
been disabled via config), then we can't know the name of the remote's
unborn HEAD, and we fall back whatever the local default branch name is
configured to be.
But that leads to one weird corner case. It's rare because it needs a
number of factors:
- the remote has an unborn HEAD
- the remote is too old to support "unborn", or has disabled it
- the remote has another branch "foo"
- the local default branch name is "foo"
In that case you end up with a local clone on an unborn "foo" branch,
disconnected completely from the remote's "foo". This is rare in
practice, but the result is quite confusing.
When choosing "foo", we can double check whether the remote has such a
name, and if so, start our local "foo" at the same spot, rather than
making it unborn.
Note that this causes a test failure in t5605, which is cloning from a
bundle that doesn't contain HEAD (so it behaves like a remote that
doesn't support "unborn"), but has a single "main" branch. That test
expects that we end up in the weird "unborn main" case, where we don't
actually check out the remote branch of the same name. Even though we
have to update the test, this seems like an argument in favor of this
patch: checking out main is what I'd expect from such a bundle.
So this patch updates the test for the new behavior and adds an adjacent
one that checks what the original was going for: if there's no HEAD and
the bundle _doesn't_ have a branch that matches our local default name,
then we end up with nothing checked out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unless "--branch" was given, clone generally tries to match the local
HEAD to the remote one. For most repositories, this is easy: the remote
tells us which branch HEAD was pointing to, and we call our local
checkout() function on that branch.
When cloning an empty repository, it's a little more tricky: we have
special code that checks the transport's "unborn" extension, or falls back
to our local idea of what the default branch should be. In either case,
we point the new HEAD to that, and set up the branch.* config.
But that leaves one case unhandled: when the remote repository _isn't_
empty, but its HEAD is unborn. The checkout() function is smart enough
to realize we didn't fetch the remote HEAD and it bails with a warning.
But we'll have ignored any information the remote gave us via the unborn
extension. This leads to nonsense outcomes:
- If the remote has its HEAD pointing to an unborn "foo" and contains
another branch "bar", cloning will get branch "bar" but leave the
local HEAD pointing at "master" (or whatever our local default is),
which is useless. The project does not use "master" as a branch.
- Worse, if the other branch "bar" is instead called "master" (but
again, the remote HEAD is not pointing to it), then we end up with a
local unborn branch "master", which is not connected to the remote
"master" (it shares no history, and there's no branch.* config).
Instead, we should try to use the remote's HEAD, even if its unborn, to
be consistent with the other cases.
The reason this case was missed is that cmd_clone() handles empty and
non-empty repositories on two different sides of a conditional:
if (we have any refs) {
fetch refs;
check for --branch;
otherwise, try to point our head at remote head;
otherwise, our head is NULL;
} else {
check for --branch;
otherwise, try to use "unborn" extension;
otherwise, fall back to our default name name;
}
So the smallest change would be to repeat the "unborn" logic at the end
of the first block. But we can note some other overlaps and
inconsistencies:
- both sides have to handle --branch (though note that it's always an
error for the empty repo case, since an empty repo by definition
does not have a matching branch)
- the fall back to the default name is much more explicit in the
empty-repo case. The non-empty case eventually ends up bailing
from checkout() with a warning, which produces a similar result, but
fails to set up the branch config we do in the empty case.
So let's pull the HEAD setup out of this conditional entirely. This
de-duplicates some of the code and the result is easy to follow, because
helper functions like find_ref_by_name() do the right thing even in the
empty-repo case (i.e., by returning NULL).
There are two subtleties:
- for a remote with a detached HEAD, it will advertise an oid for HEAD
(which we store in our "remote_head" variable), but we won't find a
matching refname (so our "remote_head_points_at" is NULL). In this
case we make a local detached HEAD to match. Right now this happens
implicitly by reaching update_head() with a non-NULL remote_head
(since we skip all of the unborn-fallback). We'll now need to
account for it explicitly before doing the fallback.
- for an empty repo, we issue a warning to the user that they've
cloned an empty repo. The text of that warning doesn't make sense
for a non-empty repo with an unborn HEAD, so we'll have to
differentiate the two cases there. We could just use different text,
but instead let's allow the code to continue down to checkout(),
which will issue an appropriate warning, like:
remote HEAD refers to nonexistent ref, unable to checkout
Continuing down to checkout() will make it easier to do more fixes
on top (see below).
Note that this patch fixes the case where the other side reports an
unborn head to us using the protocol extension. It _doesn't_ fix the
case where the other side doesn't tell us, we locally guess "master",
and the other side happens to have a "master" which its HEAD doesn't
point. But it doesn't make anything worse there, and it should actually
make it easier to fix that problem on top.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't need to put a "\n" in calls to warning(), since it adds one
itself (and the user sees an extra blank line). Drop it, and while we're
here, drop the full-stop from the message, which goes against our
guidelines.
This bug dates all the way back to 8434c2f1af (Build in clone,
2008-04-27), but presumably nobody noticed because it's hard to trigger:
you have to clone a repository whose HEAD is unborn, but which is not
otherwise empty.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak added in 0ec4b1650c (clone: fix ref selection in
--single-branch --branch=xxx, 2012-06-22).
Whether we get our "remote_head" from copy_ref() directly, or with a
call to guess_remote_head() it'll be the result of a copy_ref() in
either case, as guess_remote_head() is a wrapper for copy_ref() (or it
returns NULL).
We can't mark any tests passing passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true" as a result of this change, but
e.g. "t/t1500-rev-parse.sh" now gets closer to passing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce and apply coccinelle rule to discourage an explicit
comparison between a pointer and NULL, and applies the clean-up to
the maintenance track.
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
The remote_name variable is first assigned a copy of the value of
the "clone.defaultremotename" configuration variable and then by the
value of the "--origin" command line option. The former is prepared
to see multiple instances of the configuration variable by freeing
the current value of the variable before a copy of the newly
discovered value gets assigned to it. The latter however blindly
assigned a copy of the new value to the variable, thereby leaking
the value read from the configuration variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bundle file format gets extended to allow a partial bundle,
filtered by similar criteria you would give when making a
partial/lazy clone.
* ds/partial-bundles:
clone: fail gracefully when cloning filtered bundle
bundle: unbundle promisor packs
bundle: create filtered bundles
rev-list: move --filter parsing into revision.c
bundle: parse filter capability
list-objects: handle NULL function pointers
MyFirstObjectWalk: update recommended usage
list-objects: consolidate traverse_commit_list[_filtered]
pack-bitmap: drop filter in prepare_bitmap_walk()
pack-objects: use rev.filter when possible
revision: put object filter into struct rev_info
list-objects-filter-options: create copy helper
index-pack: document and test the --promisor option
Check the return value from parse_tree_indirect() to turn segfaults
into calls to die().
* gc/parse-tree-indirect-errors:
checkout, clone: die if tree cannot be parsed
Users can create a new repository using 'git clone <bundle-file>'. The
new "@filter" capability for bundles means that we can generate a bundle
that does not contain all reachable objects, even if the header has no
negative commit OIDs.
It is feasible to think that we could make a filtered bundle work with
the command
git clone --filter=$filter --bare <bundle-file>
or possibly replacing --bare with --no-checkout. However, this requires
having some repository-global config that specifies the specified object
filter and notifies Git about the existence of promisor pack-files.
Without a remote, that is currently impossible.
As a stop-gap, parse the bundle header during 'git clone' and die() with
a helpful error message instead of the current behavior of failing due
to "missing objects".
Most of the existing logic for handling bundle clones actually happens
in fetch-pack.c, but that logic is the same as if the user specified
'git fetch <bundle>', so we want to avoid failing to fetch a filtered
bundle when in an existing repository that has the proper config set up
for at least one remote.
Carefully comment around the test that this is not the desired long-term
behavior of 'git clone' in this case, but instead that we need to do
more work before that is possible.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a tree oid is invalid, parse_tree_indirect() can return NULL. Check
for NULL instead of proceeding as though it were a valid pointer and
segfaulting.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --filter=... --recurse-submodules" only makes the
top-level a partial clone, while submodules are fully cloned. This
behaviour is changed to pass the same filter down to the submodules.
* js/apply-partial-clone-filters-recursively:
clone, submodule: pass partial clone filters to submodules
When cloning a repo with a --filter and with --recurse-submodules
enabled, the partial clone filter only applies to the top-level repo.
This can lead to unexpected bandwidth and disk usage for projects which
include large submodules. For example, a user might wish to make a
partial clone of Gerrit and would run:
`git clone --recurse-submodules --filter=blob:5k https://gerrit.googlesource.com/gerrit`.
However, only the superproject would be a partial clone; all the
submodules would have all blobs downloaded regardless of their size.
With this change, the same filter can also be applied to submodules,
meaning the expected bandwidth and disk savings apply consistently.
To avoid changing default behavior, add a new clone flag,
`--also-filter-submodules`. When this is set along with `--filter` and
`--recurse-submodules`, the filter spec is passed along to git-submodule
and git-submodule--helper, such that submodule clones also have the
filter applied.
This applies the same filter to the superproject and all submodules.
Users who need to customize the filter per-submodule would need to clone
with `--no-recurse-submodules` and then manually initialize each
submodule with the proper filter.
Applying filters to submodules should be safe thanks to Jonathan Tan's
recent work [1, 2, 3] eliminating the use of alternates as a method of
accessing submodule objects, so any submodule object access now triggers
a lazy fetch from the submodule's promisor remote if the accessed object
is missing. This patch is a reworked version of [4], which was created
prior to Jonathan Tan's work.
[1]: 8721e2e (Merge branch 'jt/partial-clone-submodule-1', 2021-07-16)
[2]: 11e5d0a (Merge branch 'jt/grep-wo-submodule-odb-as-alternate',
2021-09-20)
[3]: 162a13b (Merge branch 'jt/no-abuse-alternate-odb-for-submodules',
2021-10-25)
[4]: https://lore.kernel.org/git/52bf9d45b8e2b72ff32aa773f2415bf7b2b86da2.1563322192.git.steadmon@google.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patrick Steinhardt