A few style fixes to get the code in line with the rest.
- asterisk to make a type a pointer to something goes in front
of the variable, not at the end of the base type.
E.g. a pointer to an integer is "int *ip", not "int* ip".
- open parenthesis for function parameter list, unlike
syntactic constructs, comes immediately after the function
name. E.g. "if (foo) bar();" not "if(foo) bar ();".
- "else" does not come on the same line as the closing brace of
corresponding "if".
The style is mostly a matter of personal taste, and people may
disagree, but consistency is important.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This function reads a freshly fetched tree object, and schedules
the objects pointed by it for further fetching, so doing
lookup_tree() and process_tree() recursively from there does not
make much sense. We need to use process() on it to make sure we
fetch it first, and leave the recursive processing to later
stages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a "tree_entry()" function that combines the common operation of
doing a "tree_entry_extract()" + "update_tree_entry()".
It also has a simplified calling convention, designed for simple loops
that traverse over a whole tree: the arguments are pointers to the tree
descriptor and a name_entry structure to fill in, and it returns a boolean
"true" if there was an entry left to be gotten in the tree.
This allows tree traversal with
struct tree_desc desc;
struct name_entry entry;
desc.buf = tree->buffer;
desc.size = tree->size;
while (tree_entry(&desc, &entry) {
... use "entry.{path, sha1, mode, pathlen}" ...
}
which is not only shorter than writing it out in full, it's hopefully less
error prone too.
[ It's actually a tad faster too - we don't need to recalculate the entry
pathlength in both extract and update, but need to do it only once.
Also, some callers can avoid doing a "strlen()" on the result, since
it's returned as part of the name_entry structure.
However, by now we're talking just 1% speedup on "git-rev-list --objects
--all", and we're definitely at the point where tree walking is no
longer the issue any more. ]
NOTE! Not everybody wants to use this new helper function, since some of
the tree walkers very much on purpose do the descriptor update separately
from the entry extraction. So the "extract + update" sequence still
remains as the core sequence, this is just a simplified interface.
We should probably add a silly two-line inline helper function for
initializing the descriptor from the "struct tree" too, just to cut down
on the noise from that common "desc" initializer.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This leaves only the horrid code in builtin-read-tree.c using the old
interface. Some day I will gather the strength to tackle that one too.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead, just use the tree buffer directly, and use the tree-walk
infrastructure to walk the buffers instead of the tree-entry list.
The tree-entry list is inefficient, and generates tons of small
allocations for no good reason. The tree-walk infrastructure is
generally no harder to use than following a linked list, and allows
us to do most tree parsing in-place.
Some programs still use the old tree-entry lists, and are a bit
painful to convert without major surgery. For them we have a helper
function that creates a temporary tree-entry list on demand.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This finally removes the tree-entry list from "struct tree", since most of
the users can just use the tree-walk infrastructure to walk the raw tree
buffers instead of the tree-entry list.
The tree-entry list is inefficient, and generates tons of small
allocations for no good reason. The tree-walk infrastructure is generally
no harder to use than following a linked list, and allows us to do most
tree parsing in-place.
Some programs still use the old tree-entry lists, and are a bit painful to
convert without major surgery. For them we have a helper function that
creates a temporary tree-entry list on demand. We can convert those too
eventually, but with this they no longer affect any users who don't need
the explicit lists.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Funnily enough, this variable was never assigned ever since it
was introduced, and has been protecting some code that has never
been executed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If a ref is changed by http-fetch, local-fetch or ssh-fetch
record the change and the remote URL/name in the log for the ref.
This requires loading the config file to check logAllRefUpdates.
Also fixed a bug in the ref lock generation; the log file name was
not being produced right due to a bad prefix length.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Created 'struct ref_lock' to contain the data necessary to perform
a ref update. This change improves writing a ref as the file names
are generated only once (rather than twice) and supports following
symrefs (up to the maximum depth). Further the ref_lock structure
provides room to extend the update API with ref logging.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Be sure not to fetch objects that already exist in the local repository.
The main process loop no longer performs this check, http-fetch now checks
prior to starting a new request queue entry and when fetch_object() is called,
and local-fetch now checks when fetch_object() is called.
As discussed in this thread: http://marc.theaimsgroup.com/?t=112854890500001
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
With the --recover option, we verify that we have absolutely
everything reachable from the target, not assuming that things
reachable from refs will be complete.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The fetch code does not need object ref lists; by disabling them we
can save some time and memory.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The call to parse_object() in process() is not actually needed - if
the object type is unknown, parse_object() will be called by loop();
if the type is known, the object will be parsed by the appropriate
process_*() function.
After this change blobs which exist locally are no longer parsed,
which gives about 2x CPU usage improvement; the downside is that there
will be no warnings for existing corrupted blobs, but detecting such
corruption is the job of git-fsck-objects, not the fetch programs.
Newly fetched objects are still checked for corruption in http-fetch.c
and ssh-fetch.c (local-fetch.c does not seem to do it, but the removed
parse_object() call would not be reached for new objects anyway).
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove holes left after deleting flags, and use shifts to emphasize
that flags are single bits.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the SEEN flag was not set, the TO_SCAN flag cannot be set,
therefore testing it is pointless.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It does not matter if we call prefetch() or set the TO_SCAN flag before
or after adding the object to process_queue. However, doing it before
object_list_insert() allows us to kill 3 lines of duplicated code.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The TO_FETCH flag also became redundant after adding the SEEN flag -
it was set and checked in process() to prevent adding the same object
to process_queue multiple times, but now SEEN guards against this.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After adding the SEEN flag, the SCANNED flag became obviously
redundant - each object can get into process_queue through process()
only once, and therefore multiple calls to process_object() for the
same object are not possible.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The process() function is very often called multiple times for the
same object (because lots of trees refer to the same blobs), but did
not have a fast check for this, therefore a lot of useless calls to
has_sha1_file() and parse_object() were made before discovering that
nothing needs to be done.
This patch adds the SEEN flag which is used in process() to make it
look at each object only once. When testing git-local-fetch on the
repository of GIT, this gives a 14x improvement in CPU usage (mainly
because the redundant calls to parse_object() are now avoided -
parse_object() always unpacks and parses the object data, even if it
was already parsed before).
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In all places where process() is called except the one in pull() (which
is executed only once) the pointer to the object is already available,
so pass it as the argument to process() instead of sha1 and avoid an
unneeded call to lookup_object_type().
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The call to parse_object() in process() is not actually needed - if
the object type is unknown, parse_object() will be called by loop();
if the type is known, the object will be parsed by the appropriate
process_*() function.
After this change blobs which exist locally are no longer parsed,
which gives about 2x CPU usage improvement; the downside is that there
will be no warnings for existing corrupted blobs, but detecting such
corruption is the job of git-fsck-objects, not the fetch programs.
Newly fetched objects are still checked for corruption in http-fetch.c
and ssh-fetch.c (local-fetch.c does not seem to do it, but the removed
parse_object() call would not be reached for new objects anyway).
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove holes left after deleting flags, and use shifts to emphasize
that flags are single bits.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the SEEN flag was not set, the TO_SCAN flag cannot be set,
therefore testing it is pointless.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It does not matter if we call prefetch() or set the TO_SCAN flag before
or after adding the object to process_queue. However, doing it before
object_list_insert() allows us to kill 3 lines of duplicated code.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The TO_FETCH flag also became redundant after adding the SEEN flag -
it was set and checked in process() to prevent adding the same object
to process_queue multiple times, but now SEEN guards against this.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After adding the SEEN flag, the SCANNED flag became obviously
redundant - each object can get into process_queue through process()
only once, and therefore multiple calls to process_object() for the
same object are not possible.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The process() function is very often called multiple times for the
same object (because lots of trees refer to the same blobs), but did
not have a fast check for this, therefore a lot of useless calls to
has_sha1_file() and parse_object() were made before discovering that
nothing needs to be done.
This patch adds the SEEN flag which is used in process() to make it
look at each object only once. When testing git-local-fetch on the
repository of GIT, this gives a 14x improvement in CPU usage (mainly
because the redundant calls to parse_object() are now avoided -
parse_object() always unpacks and parses the object data, even if it
was already parsed before).
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In all places where process() is called except the one in pull() (which
is executed only once) the pointer to the object is already available,
so pass it as the argument to process() instead of sha1 and avoid an
unneeded call to lookup_object_type().
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The recent safety check to trust only the commits we have made
things impossibly slow and turn out to waste a lot of memory.
This commit fixes it with the following improvements:
- mark already scanned objects and avoid rescanning the same
object again;
- free the tree entries when we have scanned the tree entries;
this is the same as b0d8923ec0
which reduced memory usage by rev-list;
- plug memory leak from the object_list dequeuing code;
- use the process_queue not just for fetching but for scanning,
to make things tail recursive to avoid deep recursion; the
deep recursion was especially prominent when we cloned a big
pack.
- avoid has_sha1_file() call when we already know we do not have
that object.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Don't assume that any commit we have is complete; assume that any ref
we have is complete.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Omitting the first branch in ?: is a GNU extension. Cute,
but not supported by other compilers. Replaced mostly
by explicit tests. Calls to getenv() simply are repeated
on non-GNU compilers.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
In the case where we don't know from context what type an object is, but
we don't have to fetch it, we need to parse it to determine the type
before processing it.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It didn't refetch an object it already had (good), but didn't process
it, either (bad). Synchronously process anything you already have.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This processes objects in two simultaneous passes. Each object will
first be given to prefetch(), as soon as it is possible to tell that
it will be needed, and then will be given to fetch(), when it is the
next object that needs to be parsed. Unless an implementation does
something with prefetch(), this should have no effect.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Packed delta files created by git-pack-objects seems to be the
way to go, and existing "delta" object handling code has exposed
the object representation details to too many places. Remove it
while we refactor code to come up with a proper interface in
sha1_file.c.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make pull fetch whatever is specified, parse it to figure out what it is, and
then process it appropriately. This also supports getting tag objects, and
getting whatever they tag.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Here is a patch that fixes several gcc4 warnings about different signedness,
all between char and unsigned char. I tried to keep the patch minimal
so resertod to casts in three places.
Signed-off-by: Mika Kukkonen <mikukkon@iki.fi>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds support to pull.c for requesting a reference and writing it to a
file. All of the git-*-pull programs get stubs for now.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This addresses a concern raised by Jason McMullan in the mailing
list discussion. After retrieving and storing a potentially
deltified object, pull logic tries to check and fulfil its delta
dependency. When the pull procedure is killed at this point,
however, there was no easy way to recover by re-running pull,
since next run would have found that we already have that
deltified object and happily reported success, without really
checking its delta dependency is satisfied.
This patch introduces --recover option to git-*-pull family
which causes them to re-validate dependency of deltified objects
we are fetching. A new test t5100-delta-pull.sh covers such a
failure mode.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When a remote repository is deltified, we need to get the
objects that a deltified object we want to obtain is based upon.
The initial parts of each retrieved SHA1 file is inflated and
inspected to see if it is deltified, and its base object is
asked from the remote side when it is. Since this partial
inflation and inspection has a small performance hit, it can
optionally be skipped by giving -d flag to git-*-pull commands.
This flag should be used only when the remote repository is
known to have no deltified objects.
Rsync transport does not have this problem since it fetches
everything the remote side has.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This moves the private "say()" function to pull.c, renames it to
"pull_say()", and introduces a global variable "get_verbosely" that
makes the pull backends report what they fetch. The -v option is
added to git-rpull and git-http-pull to match git-local-pull.
The documentation is updated to describe these pull commands.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch updates pull.c, the engine that decides which objects are
needed, given a commit to traverse from, to report which commit was
calling for the object that cannot be retrieved from the remote side.
This complements git-fsck-cache in that it checks the consistency of
the remote repository for reachability.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently pull() calls fetch() without checking whether we have
the wanted object but all of the existing fetch()
implementations perform this check and return success
themselves. This patch moves the check to the caller.
I will be sending a trivial git-local-pull which depends on
this in the next message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The method for deciding what to pull is useful separately from any of the
ways of actually fetching the objects.
So split out "pull" functionality from http-pull and rpull
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Junio C Hamano