The code called this operation "desperate" but the option flag is -r
and the word "recover" describes what it does better.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Historically we did not allow binary patch applied without an
explicit permission from the user, and this flag was the way to
do so. This makes the flag a no-op by always allowing binary
patch application.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reverts parts of commit 74c0cc2 and part of commit 355f541.
Franck and Rene are working on a unified upload-archive which
would supersede this when done, so better not to get in their
way.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When --stdin option is given, in addition to the <rev>s listed
on the command line, the command can read one rev parameter per
line from the standard input. The list of revs ends at the
first empty line or EOF.
Note that you still have to give all the flags from the command
line; only rev arguments (including A..B, A...B, and A^@ notations)
can be give from the standard input.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The command unpack-objects dies upon the first error. This is
probably considered a feature -- if a pack is corrupt, instead
of trying to extract from it and possibly risking to contaminate
a good repository with objects whose validity is dubious, we
should seek a good copy of the pack and retry. However, we may
not have any good copy anywhere. This implements the last
resort effort to extract what are salvageable from such a
corrupt pack.
This flag might have helped Sergio when recovering from a
corrupt pack. In my test, it managed to salvage 247 objects out
of a pack that had 251 objects but without it the command
stopped after extracting 73 objects.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The rule for howto/*.html used "$?", which expands to the list of all
newer prerequisites, including asciidoc.conf added by another rule.
"$<" should be used instead.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
... to install documentation relative to the path set with configure's
--prefix option.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After a failed "git am" attempt:
git apply --reject --verbose .dotest/patch
applies hunks that are applicable and leaves *.rej files the
rejected hunks, and it reports what it is doing. With --index,
files with a rejected hunk do not get their index entries
updated at all, so "git diff" will show the hunks that
successfully got applied.
Without --verbose to remind the user that the patch updated some
other paths cleanly, it is very easy to lose track of the status
of the working tree, so --reject implies --verbose.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the Windows world ZIP files are better supported than tar files.
Windows even includes built-in support for ZIP files nowadays.
git-zip-tree is similar to git-tar-tree; it creates ZIP files out of
git trees. It stores the commit ID (if available) in a ZIP file comment
which can be extracted by unzip.
There's still quite some room for improvement: this initial version
supports no symlinks, calls write() way too often (three times per file)
and there is no unit test.
[jc: with a minor typefix to avoid void* arithmetic]
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a high-level wrapper around the 'commit-diff' command
and used to produce cleaner history against the mirrored repository
through rebase/reset usage.
It's basically a more polished version of this:
for i in `git rev-list --no-merges remotes/git-svn..HEAD | tac`; do
git-svn commit-diff $i~1 $i
done
git reset --hard remotes/git-svn
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Does this make sense to other git-svn users out there?
pull can give funky history unless you understand how git-svn works
internally, which users should not be expected to do.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use list continuation to have better wrapping. This accounts for most of
the changes because it reindents a lot of text without applying other
changes.
Use cross-referencing for interlinking and the gitlink macro for pointing
to other tools in the git suite.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a short description and document a few selected options additionally to
the different "entities" in the standard calling convention. Advertise
other git repository browsers. Lastly, climb Mount Ego.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Inspired by the cvs annotate documentation improve and expand the man page
to also mention the limitations of file annotations. Since people coming
from the SVN/CVS world might first look here, also briefly advertise how
the pickaxe interface makes it easy to go beyond these limitation.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
... and mention that '.' will list the local repo references.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I often find myself typing this but the common abbreviation "g" for
"again" has not been supported so far for some unknown reason.
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the new flag "--reject", hunks that do not apply are sent to
the standard output, and the usable hunks are applied. The command
itself exits with non-zero status when this happens, so that the
user or wrapper can take notice and sort the remaining mess out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
By default, the command shows pathnames relative to the current
directory. Use --full-name (the same flag to do so in ls-files)
if you want to see the full pathname relative to the project root.
This makes it very pleasant to run in Emacs compilation (or
"grep-find") buffer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this option, the changed words are shown inline. For example,
if a file containing "This is foo" is changed to "This is bar", the diff
will now show "This is " in plain text, "foo" in red, and "bar" in green.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A small howto on how to setup GIT over HTTP transport protocol by
setting up WebDAV access on apache2.
[jc: minimum ispell fixes applied]
Signed-off-by: Rutger Nijlunsing <git@tux.tmfweb.nl>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Combine option descriptions in git-init-db(1). Reflect the changes to
additionally allow all users to read the created git repository.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This was already documented in the options section of the manpage. This
patch implements it, adds it to the usage message, and mentions it at the
top of the manpage.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
enable/disable colored output when the pager is in use
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since you can tar just a subdirectory of a certain revision, tell
the users so, by showing an example how to do it.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes it possible to fetch many commits (refs) at once, greatly
speeding up cg-clone.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this, you can say
git --bare repack -a -d
inside a bare repository, and it will actually work. While at it,
also move the --version, --help and --exec-path options to the
handle_options() function.
While at documenting the new options, also document the --paginate
option.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
For some repositories, deltas simply don't make sense. One can disable
them for git-repack by adding --window, but git-push insists on making
the deltas which can be very CPU-intensive for little benefit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
By default, git-tar-tree(1) sets file and directories modes to 0666
or 0777. While this is both useful and acceptable for projects such
as the Linux Kernel, it might be excessive for other projects. With
this variable, it becomes possible to tell git-tar-tree(1) to apply
a specific umask to the modes above. The special value "user"
indicates that the user's current umask will be used. This should be
enough for most projects, as it will lead to the same permissions as
git-checkout(1) would use. The default value remains 0, which means
world read-write.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds support for -a which will add an "Author: " line, and possibly
a "Committer: " line to the bottom of the commit message for CVS.
The commit message parser is now a little bit better, and some warnings
have been cleaned up.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano