--git-completion-helper excludes hidden options, such as --allow-empty
for git commit. This is typically helpful, but occasionally we want
auto-completion for obscure flags. --git-completion-helper-all returns
all options, even if they are marked as hidden or nocomplete.
Signed-off-by: Ryan Zoeller <rtzoeller@rtzoeller.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a long-standing NEEDSWORK comment that complains about
inconsistency between how an aliased option ("git clone --recurse"
which is the only one that currently exists) gives a help text in
a usage-error message vs "git cmd -h"). Get rid of it and then
make sure we say an option is an alias for another, instead of
repeating the same short help text for both, which leads to "they
seem to do the same---is there any subtle difference?" puzzlement
to end-users.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPTION_CMDMODE is essentially OPTION_SET_INT plus an extra check that
the variable had not set before. In order to allow custom processing
of the option, for example a "command mode" option that also has an
argument, it would be nice to use OPTION_CALLBACK and not have to rewrite
the extra check on incompatible options. In other words, making the
processing of the option orthogonal to the "only one of these" behavior
provided by OPTION_CMDMODE.
Add a new flag that takes care of the check, and modify OPT_CMDMODE to
use it together with OPTION_SET_INT. The new flag still requires that the
option value points to an int, but any OPTION_* value can be specified as
long as it does not require a non-int type for opt->value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We often skip an optional prefix in a string with a hardcoded
constant, e.g.
if (starts_with(string, "prefix"))
string += 6;
which is less error prone when written
skip_prefix(string, "prefix", &string);
Note that this changes a few error messages from "git reflog expire
--expire=nonsense.timestamp", which used to complain by saying
'--expire=nonsense.timestamp' is not a valid timestamp
but with this change, we say
'nonsense.timestamp' is not a valid timestamp
which is more technically correct (the string with --expire= as
a prefix obviously cannot be a valid timestamp, but the error is
about the part of the input without that prefix).
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The revision option parser recently learned about --end-of-options, but
that's not quite enough for all callers. Some of them, like git-log,
pick out some options using parse_options(), and then feed the remainder
to setup_revisions(). For those cases we need to stop parse_options()
from finding more options when it sees --end-of-options, and to retain
that option in argv so that setup_revisions() can see it as well.
Let's handle this the same as we do "--". We can even piggy-back on the
handling of PARSE_OPT_KEEP_DASHDASH, because any caller that wants to
retain one will want to retain the other.
I've included two tests here. The "log" test covers "--source", which is
one of the options it handles with parse_options(), and would fail
before this patch. There's also a test that uses the parse-options
helper directly. That confirms that the option is handled correctly even
in cases without KEEP_DASHDASH or setup_revisions(). I.e., it is safe to
use --end-of-options in place of "--" in other programs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing the argument for OPT_INTEGER and OPT_ABBREV, we check if we
can parse the entire argument to a number with "if (*s)". There is one
missing check: if "arg" is empty to begin with, we fail to notice.
This could happen with long option by writing like
git diff --inter-hunk-context= blah blah
Before 16ed6c97cc (diff-parseopt: convert --inter-hunk-context,
2019-03-24), --inter-hunk-context is handled by a custom parser
opt_arg() and does detect this correctly.
This restores the bahvior for --inter-hunk-context and make sure all
other integer options are handled the same (sane) way. For OPT_ABBREV
this is new behavior. But it makes it consistent with the rest.
PS. OPT_MAGNITUDE has similar code but git_parse_ulong() does detect
empty "arg". So it's good to go.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the option parsing machinery so that e.g. "clone --recurs ..."
doesn't error out because "clone" understands both "--recursive" and
"--recurse-submodules" to mean the same thing.
Initially "clone" just understood --recursive until the
--recurses-submodules alias was added in ccdd3da652 ("clone: Add the
--recurse-submodules option as alias for --recursive",
2010-11-04). Since bb62e0a99f ("clone: teach --recurse-submodules to
optionally take a pathspec", 2017-03-17) the longer form has been
promoted to the default.
But due to the way the options parsing machinery works this resulted
in the rather absurd situation of:
$ git clone --recurs [...]
error: ambiguous option: recurs (could be --recursive or --recurse-submodules)
Add OPT_ALIAS() to express this link between two or more options and use
it in git-clone. Multiple aliases of an option could be written as
OPT_ALIAS(0, "alias1", "original-name"),
OPT_ALIAS(0, "alias2", "original-name"),
...
The current implementation is not exactly optimal in this case. But we
can optimize it when it becomes a problem. So far we don't even have two
aliases of any option.
A big chunk of code is actually from Junio C Hamano.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's command-line parsers support uniquely abbreviated options, e.g.
`git init --ba` would automatically expand `--ba` to `--bare`.
This is a very convenient feature in every day life for Git users, in
particular when tab completion is not available.
However, it is not a good idea to rely on that in Git's test suite, as
something that is a unique abbreviation of a command line option today
might no longer be a unique abbreviation tomorrow.
For example, if a future contribution added a new mode
`git init --babyproofing` and a previously-introduced test case used the
fact that `git init --ba` expanded to `git init --bare`, that future
contribution would now have to touch seemingly unrelated tests just to
keep the test suite from failing.
So let's disallow abbreviated options in the test suite by default.
Note: for ease of implementation, this patch really only touches the
`parse-options` machinery: more and more hand-rolled option parsers are
converted to use that internal API, and more and more scripts are
converted to built-ins (naturally using the parse-options API, too), so
in practice this catches most issues, and is definitely the biggest bang
for the buck.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion display doesn't actually care about where we are in the
parsing. It's generated completely from the set of available options. So
we don't need to see the parse-options context struct at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`OPT_ARGUMENT()` is intended to keep the specified long option in `argv`
and not to do anything else.
However, it would make a lot of sense for the caller to know whether
this option was seen at all or not. For example, we want to teach `git
difftool` to work outside of any Git worktree, but only when
`--no-index` was specified.
Note: nothing in Git uses OPT_ARGUMENT(). Even worse, looking through
the commit history, one can easily see that nothing even
ever used it, apart from the regression test.
So not only do we make `OPT_ARGUMENT()` more useful, we are also about
to introduce its first real user!
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPTION_CALLBACK is much simpler/safer to use, but parse_opt_cb does
not allow access to parse_opt_ctx_t, which sometimes is useful
(e.g. to obtain the prefix).
Extending parse_opt_cb to take parse_opt_cb could result in a lot of
changes. Instead let's just allow ll_callback to be used with
OPTION_CALLBACK. The user will have to be careful, not to change
anything in ctx, or return wrong result code. But that's the price for
ll_callback.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give names to these magic negative numbers. Make parse_opt_ll_cb
return an enum to make clear it can actually control parse_options()
with different return values (parse_opt_cb can too, but nobody needs
it).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lowlevel callbacks have different function signatures. Add a new field
in 'struct option' with the right type for lowlevel callbacks.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed for diff_opt_parse() where we do
value = (value & ~mask) | some_more;
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse-options can unambiguously find an abbreviation only if it sees
all available options. This is usually the case when you use
parse_options(). But there are other callers like blame or shortlog
which uses parse_options_start() in combination with a custom option
parser, like rev-list. parse-options cannot see all options in this
case and will get abbrev detection wrong. Disable it.
t7800 needs update because --symlink no longer expands to --symlinks
and will be passed down to git-diff, which will not recognize it. I
still think this is the correct thing to do. But if --symlink has been
actually used in the wild, we would just add an option alias for it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is to help reimplement diff_opt_parse() using parse_options().
The behavior of parse_options() is changed to be the same as the
other:
- no argv0 in argv[], everything can be processed
- argv[] must not be updated, it's the caller's job to do that
- return the number of arguments processed
- leave all unknown options / non-options alone (this one can already
be achieved with PARSE_OPT_KEEP_UNKNOWN and
PARSE_OPT_STOP_AT_NON_OPTION)
This mode is NOT supposed to stay here for long. It's to help
converting diff/rev option parsing. Once that work is over and we can
just use parse_options() throughout the code base, this will be
deleted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The compiler reports this because show_gitcomp() never actually
returns a value:
"parse-options.c", line 520: warning: Function has no return
statement : show_gitcomp
We could shut the compiler up. But instead let's not bury exit() too
deep. Do the same as internal -h handling, return a special error code
and handle the exit() in parse_options() (and other
parse_options_step() callers) instead.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We indent with TABs and sometimes for fine alignment, TABs followed by
spaces, but never all spaces (unless the indentation is less than 8
columns). Indenting with spaces slips through in some places. Fix
them.
Imported code and compat/ are left alone on purpose. The former should
remain as close as upstream as possible. The latter pretty much has
separate maintainers, it's up to them to decide.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One error is updated to start with lowercase to be consistent with the
rest.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two strings are clearly not for the user to see. Reduce the
violence in one string while at there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce optname() that does the early half of original opterror() to
come up with the name of the option reported back to the user, and use
it to kill opterror(). The callers of opterror() now directly call
error() using the string returned by opterror() instead.
There are a few issues with opterror()
- it tries to assemble an English sentence from pieces. This is not
great for translators because we give them pieces instead of a full
sentence.
- It's a wrapper around error() and needs some hack to let the
compiler know it always returns -1.
- Since it takes a string instead of printf format, one call site has
to assemble the string manually before passing to it.
Using error() directly solves the second and third problems.
It kind helps the first problem as well because "%s does foo" does
give a translator a full sentence in a sense and let them reorder if
needed. But it has limitations, if the subject part has to change
based on the rest of the sentence, that language is screwed. This is
also why I try to avoid calling optname() when 'flags' is known in
advance.
Mark of these strings for translation as well while at there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parseopt wraps argument help strings in a pair of angular brackets by
default, to tell users that they need to replace it with an actual
value. This is useful in most cases, because most option arguments
are indeed single values of a certain type. The option
PARSE_OPT_LITERAL_ARGHELP needs to be used in option definitions with
arguments that have multiple parts or are literal strings.
Stop adding these angular brackets if special characters are present,
as they indicate that we don't deal with a simple placeholder. This
simplifies the code a bit and makes defining special options slightly
easier.
Remove the flag PARSE_OPT_LITERAL_ARGHELP in the cases where the new
and more cautious handling suffices.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commands that make use of --git-completion-helper feature could
now produce a lot of --no-xxx options that a command can take. This in
many case could nearly double the amount of completable options, using
more screen estate and also harder to search for the wanted option.
This patch attempts to mitigate that by collapsing extra --no-
options, the ones that are added by --git-completion-helper and not in
original struct option arrays. The "--no-..." option will be displayed
in this case to hint about more options, e.g.
> ~/w/git $ git clone --
--bare --origin=
--branch= --progress
--checkout --quiet
--config= --recurse-submodules
--depth= --reference=
--dissociate --reference-if-able=
--filter= --separate-git-dir=
--hardlinks --shallow-exclude=
--ipv4 --shallow-since=
--ipv6 --shallow-submodules
--jobs= --shared
--local --single-branch
--mirror --tags
--no-... --template=
--no-checkout --upload-pack=
--no-hardlinks --verbose
--no-tags
and when you complete it with --no-<tab>, all negative options will be
presented:
> ~/w/git $ git clone --no-
--no-bare --no-quiet
--no-branch --no-recurse-submodules
--no-checkout --no-reference
--no-config --no-reference-if-able
--no-depth --no-separate-git-dir
--no-dissociate --no-shallow-exclude
--no-filter --no-shallow-since
--no-hardlinks --no-shallow-submodules
--no-ipv4 --no-shared
--no-ipv6 --no-single-branch
--no-jobs --no-tags
--no-local --no-template
--no-mirror --no-upload-pack
--no-origin --no-verbose
--no-progress
Corner case: to make sure that people will never accidentally complete
the fake option "--no-..." there must be one real --no- in the first
complete listing even if it's not from the original struct option.
PS. This could could be made simpler with ";&" to fall through from
"--no-*" block and share the code but ";&" is not available on bash-3
(i.e. Mac)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 7fb6aefd2a (Merge branch 'nd/parseopt-completion' - 2018-03-14)
is merged, the completion for negative form is left out because the
series is alread long and it could be done in a follow up series. This
is it.
--git-completion-helper now provides --no-xxx so that git-completion.bash
can drop the extra custom --no-xxx in the script. It adds a lot more
--no-xxx than what's current provided by the git-completion.bash
script. We'll trim that down later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually, the usage should be shown only if the user does not know what
options are available. If the user specifies an invalid value, the user
is already aware of the available options. In this case, there is no
point in displaying the usage anymore.
This patch applies to "git tag --contains", "git branch --contains",
"git branch --points-at", "git for-each-ref --contains" and many more.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote --mirror" is a special case. Technically it is possible to
specify --mirror without any argument. But we will get a "dangerous,
deprecated!" warning in that case.
This new parse-opt flag allows --git-completion-helper to always
complete --mirror=, ignoring the dangerous use case.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option is designed to be used by git-completion.bash. For many
simple cases, what we do in there is usually
__gitcomp "lots of completion options"
which has to be manually updated when a new user-visible option is
added. With support from parse-options, we can write
__gitcomp "$(git command --git-completion-helper)"
and get that list directly from the parser for free. Dangerous/Unpopular
options could be hidden with the new "NOCOMPLETE" flag.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the helper macro MOVE_ARRAY to move arrays. This is shorter and
safer, as it automatically infers the size of elements.
Patch generated by Coccinelle and contrib/coccinelle/array.cocci in
Travis CI's static analysis build job.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when parse_options() produces a help message it always emits
a blank line after the usage text to separate it from the options text.
If the option spec does not define any switches, or only defines hidden
switches that will not be displayed, then the help text will end up with
two trailing blank lines instead of one. Let's defer emitting the blank
line between the usage text and the options text until it is clear that
the options section will not be empty.
Fixes t1502.5, t1502.6.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit 54e6dc7 added translation support to parse-options, an
fprintf was mistakenly replaced by a call to putchar(). Let's use fputc
instead.
Fixes t0040.11, t0040.12, t0040.33, and t1502.8.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change all the "TRANSLATORS: [...]" comments in the C code to use the
regular Git coding style, and amend the style guide so that the
example there uses that style.
This custom style was necessary back in 2010 when the gettext support
was initially added, and was subsequently documented in commit
cbcfd4e3ea ("i18n: mention "TRANSLATORS:" marker in
Documentation/CodingGuidelines", 2014-04-18).
GNU xgettext hasn't had the parsing limitation that necessitated this
exception for almost 3 years. Since its 0.19 release on 2014-06-02
it's been able to recognize TRANSLATOR comments in the standard Git
comment syntax[1].
Usually we'd like to keep compatibility with software that's that
young, but in this case literally the only person who needs to be
using a gettext newer than 3 years old is Jiang Xin (the only person
who runs & commits "make pot" results), so I think in this case we can
make an exception.
This xgettext parsing feature was added after a thread on the Git
mailing list[2] which continued on the bug-gettext[3] list, but we
never subsequently changed our style & styleguide, do so.
There are already longstanding changes in git that use the standard
comment style & have their TRANSLATORS comments extracted properly
without getting the literal "*"'s mixed up in the text, as would
happen before xgettext 0.19.
Commit 7ff2683253 ("builtin-am: implement -i/--interactive",
2015-08-04) added one such comment, which in commit df0617bfa7 ("l10n:
git.pot: v2.6.0 round 1 (123 new, 41 removed)", 2015-09-05) got picked
up in the po/git.pot file with the right format, showing that Jiang
already runs a modern xgettext.
The xgettext parser does not handle the sort of non-standard comment
style that I'm amending here in sequencer.c, but that isn't standard
Git comment syntax anyway. With this change to sequencer.c & "make
pot" the comment in the pot file is now correct:
#. TRANSLATORS: %s will be "revert", "cherry-pick" or
-#. * "rebase -i".
+#. "rebase -i".
1. http://git.savannah.gnu.org/cgit/gettext.git/commit/?id=10af7fe6bd
2. <2ce9ec406501d112e032c8208417f8100bed04c6.1397712142.git.worldhello.net@gmail.com>
(https://public-inbox.org/git/2ce9ec406501d112e032c8208417f8100bed04c6.1397712142.git.worldhello.net@gmail.com/)
3. https://lists.gnu.org/archive/html/bug-gettext/2014-04/msg00016.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prefix_filename() function returns a pointer to static
storage, which makes it easy to use dangerously. We already
fixed one buggy caller in hash-object recently, and the
calls in apply.c are suspicious (I didn't dig in enough to
confirm that there is a bug, but we call the function once
in apply_all_patches() and then again indirectly from
parse_chunk()).
Let's make it harder to get wrong by allocating the return
value. For simplicity, we'll do this even when the prefix is
empty (and we could just return the original file pointer).
That will cause us to allocate sometimes when we wouldn't
otherwise need to, but this function isn't called in
performance critical code-paths (and it already _might_
allocate on any given call, so a caller that cares about
performance is questionable anyway).
The downside is that the callers need to remember to free()
the result to avoid leaking. Most of them already used
xstrdup() on the result, so we know they are OK. The
remainder have been converted to use free() as appropriate.
I considered retaining a prefix_filename_unsafe() for cases
where we know the static lifetime is OK (and handling the
cleanup is awkward). This is only a handful of cases,
though, and it's not worth the mental energy in worrying
about whether the "unsafe" variant is OK to use in any
situation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function takes the prefix as a ptr/len pair, but in
every caller the length is exactly strlen(ptr). Let's
simplify the interface and just take the string. This saves
callers specifying it (and in some cases handling a NULL
prefix).
In a handful of cases we had the length already without
calling strlen, so this is technically slower. But it's not
likely to matter (after all, if the prefix is non-empty
we'll allocate and copy it into a buffer anyway).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Programs may use usage_msg_opt() to print a brief message
followed by the program usage, and then exit. The message
isn't prefixed at all, though, so it doesn't match our usual
error output and is easy to overlook:
$ git clone 1 2 3
Too many arguments.
usage: git clone [<options>] [--] <repo> [<dir>]
-v, --verbose be more verbose
-q, --quiet be more quiet
--progress force progress reporting
-n, --no-checkout don't create a checkout
--bare create a bare repository
[...and so on for another 31 lines...]
It looks especially bad when the message starts with an
option, like:
$ git replace -e
-e needs exactly one argument
usage: git replace [-f] <object> <replacement>
or: git replace [-f] --edit <object>
[...etc...]
Let's put our usual "fatal:" prefix in front of it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPT_COUNTUP() merely increments the counter upon --option, and resets it
to 0 upon --no-option, which means that there is no "unspecified" value
with which a client can initialize the counter to determine whether or
not --[no]-option was seen at all.
Make OPT_COUNTUP() treat any negative number as an "unspecified" value
to address this shortcoming. In particular, if a client initializes the
counter to -1, then if it is still -1 after parse_options(), then
neither --option nor --no-option was seen; if it is 0, then --no-option
was seen last, and if it is 1 or greater, than --option was seen last.
This change does not affect the behavior of existing clients because
they all use the initial value of 0 (or more).
Note that builtin/clean.c initializes the variable used with
OPT__FORCE (which uses OPT_COUNTUP()) to a negative value, but it is set
to either 0 or 1 by reading the configuration before the code calls
parse_options(), i.e. as far as parse_options() is concerned, the
initial value of the variable is not negative.
To test this behavior, in test-parse-options.c, "verbose" is set to
"unspecified" while quiet is set to 0 which will test the new behavior
with all sets of values.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let callers provide their own handler for the short option -h even
without the flag PARSE_OPT_NO_INTERNAL_HELP, but call the internal
handler (showing usage information) if that is the only parameter.
Implement the first part by checking for -h only if parse_short_opt()
can't find it and returns -2.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Avoid long lines and repeating parse_options_usage() calls with their
duplicate parameters by providing labels with speaking names to jump to.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
The unsigned long option parsing (including 'k'/'m'/'g' suffix
parsing) is more widely applicable. Add support for OPT_MAGNITUDE
to parse-options.h and change pack-objects.c use this support.
The error behavior on parse errors follows that of OPT_INTEGER. The
name of the option that failed to parse is reported with a brief
message describing the expect format for the option argument and
then the full usage message for the command invoked.
This differs from the previous behavior for OPT_ULONG used in
pack-objects for --max-pack-size and --window-memory which used to
display the value supplied in the error message and did not display
the full usage message.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is easy to overlook an already assigned single-letter option name
and try to use it for a new one. Help the developer to catch it
before such a mistake escapes the lab.
This retroactively forbids any short option name (which is defined
to be of type "int") outside the ASCII printable range. We might
want to do one of two things:
- tighten the type of short_name member to 'char', and further
update optbug() to protect it against doing "'%c'" on a funny
value, e.g. negative or above 127.
- drop the check (even the "duplicate" check) for an option whose
short_name is either negative or above 255, to allow clever folks
to take advantage of the fact that such a short_name cannot be
parsed from the command line and the member can be used to store
some extra information.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The skip_prefix() function returns a pointer to the content
past the prefix, or NULL if the prefix was not found. While
this is nice and simple, in practice it makes it hard to use
for two reasons:
1. When you want to conditionally skip or keep the string
as-is, you have to introduce a temporary variable.
For example:
tmp = skip_prefix(buf, "foo");
if (tmp)
buf = tmp;
2. It is verbose to check the outcome in a conditional, as
you need extra parentheses to silence compiler
warnings. For example:
if ((cp = skip_prefix(buf, "foo"))
/* do something with cp */
Both of these make it harder to use for long if-chains, and
we tend to use starts_with() instead. However, the first line
of "do something" is often to then skip forward in buf past
the prefix, either using a magic constant or with an extra
strlen(3) (which is generally computed at compile time, but
means we are repeating ourselves).
This patch refactors skip_prefix() to return a simple boolean,
and to provide the pointer value as an out-parameter. If the
prefix is not found, the out-parameter is untouched. This
lets you write:
if (skip_prefix(arg, "foo ", &arg))
do_foo(arg);
else if (skip_prefix(arg, "bar ", &arg))
do_bar(arg);
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We encourage to spell an argument hint that consists of multiple
words as a single-token separated with dashes. In order to help
catching violations added by new callers of parse-options, make sure
argh does not contain SP or _ when the code validates the option
definitions.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid scanning strings twice, once with strchr() and then with
strlen(), by using strchrnul().
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rohit Mani <rohit.mani@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used to define a set of mutually exclusive "command
mode" options, and automatically catch use of more than one from
that set as an error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because our command-line parser considers only one byte at the time
for short-options, we incorrectly report only the first byte when
multi-byte input was provided. This makes user-errors slightly
awkward to diagnose for instance under UTF-8 locale and non-English
keyboard layouts.
Report the whole argument-string when a non-ASCII short-option is
detected.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ryan Zoeller