The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
This includes mentioning the initial hash output of diff-tree, and
changes the header to "raw output format" which is more descriptive.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"what you are going to commit is" doesn't need the "is" and does need a comma.
"can trivially see" is an unecessary split infinitive and "easily" is a more
appropriate adverb.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Many places in the documentation we still talked about reading
what commit is recorded in .git/HEAD or writing the new head
information into it, both assuming .git/HEAD is a symlink. That
is not necessarily so.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch makes the documentation refer to the index
as index instead of cache, but some references still
remain. (e.g. git-update-index.txt)
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The fixes focuses on improving the HTML output. Most noteworthy:
- Fix the Makefile to also make various *.html files depend on
included files.
- Consistently use 'NOTE: ...' instead of '[ ... ]' for additional
info.
- Fix ending '::' for description lists in OPTION section etc.
- Fix paragraphs in description lists ending up as preformated text.
- Always use listingblocks (preformatted text wrapped in lines with -----)
for examples that span empty lines, so they are put in only one HTML
block.
- Use '1.' instead of '(1)' for numbered lists.
- Fix linking to other GIT docs.
- git-rev-list.txt: put option descriptions in an OPTION section.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The replacement was performed automatically by these commands:
perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \
README Documentation/*.txt
perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \
README Documentation/*.txt
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: Johannes spent time and effort to see how consistent our
use of terminilogy is, and as a byproduct made these corrections
not related to the terminology unification. I really appreciate
it.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I got tired of maintaining almost duplicated descriptions in
diff-* brothers, both in usage string and documentation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This updates diff documentation to discuss --find-copies-harder,
and adds descriptions for options that were not described
earlier.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch updates diff documentation and usage strings:
- clarify the semantics of -R. It is not "output in reverse";
rather, it is "I will feed diff backwards". Semantically
they are different when -C is involved.
- describe -O in usage strings of diff-* brothers. It was
implemented, documented but not described in usage text.
Also it adds -O to diff-helper. Like -S (and unlike -M/-C/-B),
this option can work on sanitized diff-raw output produced by
the diff-* brothers. While we are at it, the call it makes to
diffcore is cleaned up to use the diffcore_std() like everybody
else, and the declaration for the low level diffcore routines
are moved from diff.h (public) to diffcore.h (private between
diff.c and diffcore backends).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A new diffcore filter diffcore-order is introduced. This takes
a text file each of whose line is a shell glob pattern. Patches
that match a glob pattern on an earlier line in the file are
output before patches that match a later line, and patches that
do not match any glob pattern are output last.
A typical orderfile for git project probably should look like
this:
README
Makefile
Documentation
*.h
*.c
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A bug in the command line argument parsing code was making
pickaxe not to work at all in diff-cache and diff-files commands.
Embarrassingly enough, the working pickaxe in diff-tree tells me
that it was not working in these two commands from day one.
This patch fixes it.
Also updates the documentation to describe the --pickaxe-all option.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The recent diff updates gave diff-cache the same ability to
filter paths, which was not properly documented.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update the diff-raw format as Linus and I discussed, except that
it does not use sequence of underscore '_' letters to express
nonexistence. All '0' mode is used for that purpose instead.
The new diff-raw format can express rename/copy, and the earlier
restriction that -M and -C _must_ be used with the patch format
output is no longer necessary. The patch makes -M and -C flags
independent of -p flag, so you need to say git-whatchanged -M -p
to get the diff/patch format.
Updated are both documentations and tests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This steals the "pickaxe" feature from JIT and make it available
to the bare Plumbing layer. From the command line, the user
gives a string he is intersted in.
Using the diff-core infrastructure previously introduced, it
filters the differences to limit the output only to the diffs
between <src> and <dst> where the string appears only in one but
not in the other. For example:
$ ./git-rev-list HEAD | ./git-diff-tree -Sdiff-tree-helper --stdin -M
would show the diffs that touch the string "diff-tree-helper".
In real software-archaeologist application, you would typically
look for a few to several lines of code and see where that code
came from.
The "pickaxe" module runs after "rename/copy detection" module,
so it even crosses the file rename boundary, as the above
example demonstrates.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This introduces the diff-core, the layer between the diff-tree
family and the external diff interface engine. The calls to the
interface diff-tree family uses (diff_change and diff_addremove)
have not changed and will not change. The purpose of the
diff-core layer is to provide an infrastructure to transform the
set of differences sent from the applications, before sending
them to the external diff interface.
The recently introduced rename detection code has been rewritten
to use the diff-core facility. When applications send in
separate creates and deletes, matching ones are transformed into
a single rename-and-edit diff, and sent out to the external diff
interface as such.
This patch also enhances the rename detection code further to be
able to detect copies. Currently this happens only as long as
copy sources appear as part of the modified files, but there
already is enough provision for callers to report unmodified
files to diff-core, so that they can be also used as copy source
candidates. Extending the callers this way will be done in a
separate patch.
Please see and marvel at how well this works by trying out the
newly added t/t4003-diff-rename-1.sh test script.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This cleans up the way calls are made into the diff core from diff-tree
family and diff-helper. Earlier, these programs had "if
(generating_patch)" sprinkled all over the place, but those ugliness are
gone and handled uniformly from the diff core, even when not generating
patch format.
This also allowed diff-cache and diff-files to acquire -R
(reverse) option to generate diff in reverse. Users of
diff-tree can swap two trees easily so I did not add -R there.
[ Linus' note: I'll add -R to "diff-tree" too, since a "commit
diff" doesn't have another tree to switch around: the other
tree is always the parent(s) of the commit ]
Also -M<digits-as-mantissa> suggestion made by Linus has been
implemented.
Documentation updates are also included.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This rips out the rename detection engine from diff-helper and moves it
to the diff core, and updates the internal calling convention used by
diff-tree family into the diff core. In order to give the same option
name to diff-tree family as well as to diff-helper, I've changed the
earlier diff-helper '-r' option to '-M' (stands for Move; sorry but the
natural abbreviation 'r' for 'rename' is already taken for 'recursive').
Although I did a fair amount of test with the git-diff-tree with
existing rename commits in the core GIT repository, this should still be
considered beta (preview) release. This patch depends on the diff-delta
infrastructure just committed.
This implements almost everything I wanted to see in this series of
patch, except a few minor cleanups in the calling convention into diff
core, but that will be a separate cleanup patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Thomas Rast