* 'maint' of git://repo.or.cz/git-gui:
git-gui: Save geometry before the window layout is damaged
git-gui: Give amend precedence to HEAD over MERGE_MSG
git-gui: Include 'war on whitespace' fixes from git.git
Because Tk does not assure us the order that it will process
children in before it destroys the main toplevel we cannot safely
save our geometry data during a "bind . <Destroy>" event binding.
The geometry may have already changed as a result of a one or
more children being removed from the layout. This was pointed
out in gitk by Mark Levedahl, and patched over there by commit
b6047c5a81.
So we now also use "wm protocol . WM_DELETE_WINDOW" to detect when
the window is closed by the user, and forward that close event to
our main do_quit routine.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Apparently git-commit.sh (the command line commit user interface in
core Git) always gives precedence to the prior commit's message if
`commit --amend` is used and a $GIT_DIR/MERGE_MSG file also exists.
We actually were doing the same here in git-gui, but the amended
message got lost if $GIT_DIR/MERGE_MSG already existed because
we started a rescan immediately after loading the prior commit's
body into the edit buffer. When that happened the rescan found
MERGE_MSG existed and replaced the commit message buffer with the
contents of that file. This meant the user never saw us pick up
the commit message of the prior commit we are about to replace.
Johannes Sixt <J.Sixt@eudaptics.com> found this bug in git-gui by
running `git cherry-pick -n $someid` and then trying to amend the
prior commit in git-gui, thus combining the contents of $someid
with the contents of HEAD, and reusing the commit message of HEAD,
not $someid. With the recent changes to make cherry-pick use the
$GIT_DIR/MERGE_MSG file Johannes saw git-gui pick up the message
of $someid, not HEAD. Now we always use HEAD if we are amending.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Earlier git.git applied a large "war on whitespace" patch that was
created using 'apply --whitespace=strip'. Unfortunately a few of
git-gui's own files got caught in the mix and were also cleaned up.
That was a6080a0a44.
This patch is needed in git-gui.git to reapply those exact same
changes here, otherwise our version generator script is unable to
obtain our version number from git-describe when we are hosted in
the git.git repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When using git-p4 in this manner:
git-p4 clone //depot/path/project myproject
If "myproject" already exists as a dir, but not a valid git repo, it fails
to create the directory.
Signed-off-by: Kevin Green <Kevin.Green@morganstanley.com>
* 'master' of git://repo.or.cz/git-gui:
git-gui: Internalize symbolic-ref HEAD reading logic
git-gui: Expose the merge.diffstat configuration option
git-gui: Allow users to delete remote branches
git-gui: Allow users to rename branches through 'branch -m'
git-gui: Disable tearoff menus on Windows, Mac OS X
git-gui: Provide fatal error if library is unavailable
git-gui: Enable verbose Tcl loading earlier
git-gui: Show the git-gui library path in 'About git-gui'
git-gui: GUI support for running 'git remote prune <name>'
git gui 0.8.0
* maint: (46 commits)
git-gui: Changed blame header bar background to match main window
git-gui: Favor the original annotations over the recent ones
git-gui: Improve our labeling of blame annotation types
git-gui: Use three colors for the blame viewer background
git-gui: Jump to original line in blame viewer
git-gui: Display both commits in our tooltips
git-gui: Run blame twice on the same file and display both outputs
git-gui: Display the "Loading annotation..." message in italic
git-gui: Rename fields in blame viewer to better descriptions
git-gui: Label the uncommitted blame history entry
git-gui: Switch internal blame structure to Tcl lists
git-gui: Cleanup redundant column management in blame viewer
git-gui: Better document our blame variables
git-gui: Remove unused commit_list from blame viewer
git-gui: Automatically expand the line number column as needed
git-gui: Make the line number column slightly wider in blame
git-gui: Use lighter colors in blame view
git-gui: Remove unnecessary space between columns in blame viewer
git-gui: Remove the loaded column from the blame viewer
git-gui: Clip the commit summaries in the blame history menu
...
* 'maint' of git://repo.or.cz/git-gui: (46 commits)
git-gui: Changed blame header bar background to match main window
git-gui: Favor the original annotations over the recent ones
git-gui: Improve our labeling of blame annotation types
git-gui: Use three colors for the blame viewer background
git-gui: Jump to original line in blame viewer
git-gui: Display both commits in our tooltips
git-gui: Run blame twice on the same file and display both outputs
git-gui: Display the "Loading annotation..." message in italic
git-gui: Rename fields in blame viewer to better descriptions
git-gui: Label the uncommitted blame history entry
git-gui: Switch internal blame structure to Tcl lists
git-gui: Cleanup redundant column management in blame viewer
git-gui: Better document our blame variables
git-gui: Remove unused commit_list from blame viewer
git-gui: Automatically expand the line number column as needed
git-gui: Make the line number column slightly wider in blame
git-gui: Use lighter colors in blame view
git-gui: Remove unnecessary space between columns in blame viewer
git-gui: Remove the loaded column from the blame viewer
git-gui: Clip the commit summaries in the blame history menu
...
* maint: (38 commits)
git-gui: Changed blame header bar background to match main window
git-gui: Favor the original annotations over the recent ones
git-gui: Improve our labeling of blame annotation types
git-gui: Use three colors for the blame viewer background
git-gui: Jump to original line in blame viewer
git-gui: Display both commits in our tooltips
git-gui: Run blame twice on the same file and display both outputs
git-gui: Display the "Loading annotation..." message in italic
git-gui: Rename fields in blame viewer to better descriptions
git-gui: Label the uncommitted blame history entry
git-gui: Switch internal blame structure to Tcl lists
git-gui: Cleanup redundant column management in blame viewer
git-gui: Better document our blame variables
git-gui: Remove unused commit_list from blame viewer
git-gui: Automatically expand the line number column as needed
git-gui: Make the line number column slightly wider in blame
git-gui: Use lighter colors in blame view
git-gui: Remove unnecessary space between columns in blame viewer
git-gui: Remove the loaded column from the blame viewer
git-gui: Clip the commit summaries in the blame history menu
...
Allow choosing between '-c' (combined diff) and '--cc' (compact
combined) diff format in 'commitdiff' view for merge (multiparent)
commits. Default is now '--cc'.
In the bottom part of navigation bar there is link allowing to change
diff format: "combined" for '-c' (when using '--cc') and "compact" for
'--cc' (when using '-c'), just on the right of "raw" link to
'commitdiff_plain" view.
About patchset part of diff --cc output: the difftree (whatchanged
table) has "patch" links to anchors to individual patches (on the same
page). The --cc option further compresses the patch output by
omitting some hunks; when this optimization makes all hunks disappear,
the patch is not shown (like in any other "empty diff" case). But the
fact that patch has been simplified out is not reflected in the raw
(difftree) part of diff output; the raw part is the same for '-c' and
'--cc' options. As correcting difftree is rather out of the question,
as it would require scanning patchset part before writing out
difftree, we add "Simple merge" empty diffs as a place to have anchor
to in place of those simplified out and removed patches.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add links to diff to file ('blobdiff' view) for each of individual
versions of the file in a merge commit to the from-file/to-file header
in the patch part of combined 'commitdiff' view for merges.
The from-file/to-file header for combined diff now looks like:
--- _1_/_git-gui/git-gui.sh_
--- _2_/_git-gui.sh_
+++ b/_git-gui/git-gui.sh_
where _<filename>_ link is link to appropriate version of a file
('blob' view), and _<n>_ is link to respective diff to mentioned
version of a file ('blobdiff' view). There is even hint provided in
the form of title attribute.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using default, diff(1) like from-file/to-file header for
combined diff (for a merge commit), which looks like:
--- a/git-gui/git-gui.sh
+++ b/_git-gui/git-gui.sh_
(where _link_ denotes [hidden] hyperlink), create from-file(n)/to-file
header, using "--- <n>/_<filename>_" for each of parents, e.g.:
--- 1/_git-gui/git-gui.sh_
--- 2/_git-gui.sh_
+++ b/_git-gui/git-gui.sh_
Test it on one of merge commits involving rename, e.g.
95f97567c1887d77f3a46b42d8622c76414d964d (rename at top)
5bac4a6719 (file from one branch)
This is mainly meant to easier see renames in a merge commit.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit makes git_patchset_body easier to read, and reduces level of
nesting and indent level. It adds more lines that it removes because of
extra parameter passing in subroutines, and subroutine calls in
git_patchset_body. Also because there are few added comments.
Below there are descriptions of all split-off subroutines:
Separate formatting "git diff" header into format_git_diff_header_line.
While at it fix it so it always escapes pathname. It would be even more
useful if we decide to use `--cc' for merges, and need to generate by
hand empty patches for anchors.
Separate formatting extended (git) diff header lines into
format_extended_diff_header_line. This one is copied without changes.
Separate formatting two-lines from-file/to-file diff header into
format_diff_from_to_header subroutine. While at it fix it so it always
escapes pathname. Beware calling convention: it takes _two_ lines.
Separate generating %from and %to hashes (with info used among others to
generate hyperlinks) into parse_from_to_diffinfo subroutine. This one is
copied without changes.
Separate checking if file was deleted (and among others therefore does
not have link to the result file) into is_deleted subroutine. This would
allow us to easily change the algotithm to find if file is_deleted in
the result.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if 'hp' (hash_parent) parameter to 'commitdiff' view is one of
'h' (hash) commit parents, i.e. if commitdiff is of the form
"<commit>^<n> <commit>", and mark it as such in the bottom part of
navigation bar. The "next" link in commitdiff view was introduced
in commit 151602df00
If 'hb' is n-th parent of 'h', show the following at the bottom
of navigation bar:
(from parent n: _commit_)
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit-fb1dde4a we show combined diff for merges in 'commitdiff'
view, and since commit-208ecb2e also in 'commit' view. Sometimes
though one would want to see diff to one of merge commit parents. It
is easy in 'commit' view: in the commit header part there are "diff"
links for each of parent header. This commit adds such links also for
'commitdiff' view.
Add to difftree / whatchanged table row with "1", "2", ... links to
'commitdiff' view for diff with n-th parent for merge commits, as a
table header. This is visible only in 'comitdiff' view, and only for
a merge commit (comit with more than one parent).
To save space links are shown as "n", where "n" is number of a parent,
and not as for example shortened (to 7 characters) sha1 of a parent
commit. To make it easier to discover what links is for, each link
has 'title' attribute explaining the link.
Note that one would need to remember that difftree table in 'commit'
view has one less column (it doesn't have "patch" link column), if one
would want to add such table header also in 'commit' view.
Example output:
1 2 3
Makefile patch | diff1 | diff2 | diff3 | blob | history
cache.h patch | diff1 | diff2 | diff3 | blob | history
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
tutorial: use "project history" instead of "changelog" in header
Documentation: user-manual todo
user-manual: add a missing section ID
Fix typo in remote branch example in git user manual
user-manual: quick-start updates
In the kernel we have a rule for *.c -> *.s files exactly because
it's nice to be able to easily say "ok, what does that generate".
Here's a patch to add such a rule to git too, in case anybody is
interested. It makes it much simpler to just do
make sha1_file.s
and look at the compiler-generated output that way, rather than having to
fire up gdb on the resulting binary.
(Add -fverbose-asm or something if you want to, it can make the result
even more readable)
[jc: add *.s to .gitignore]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The word "changelog" seems a little too much like jargon to me, and beginners
must understand section headers so they know where to look for help.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
In Documentation/user-manual.txt the example
$ git checkout --track -b origin/maint maint
under "Getting updates with git pull", should read
$ git checkout --track -b maint origin/maint
This was noticed by Ron, and reported through
http://bugs.debian.org/427502
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Update text to reflect new position in appendix.
Update the name to reflect the fact that this is closer to reference
than tutorial documentation (as suggested by Jonas Fonseca).
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Make git-mergetool prefer meld under GNOME, and kdiff3 under KDE. When
considering emerge and vimdiff, check $VISUAL and $EDITOR to see which the
user might prefer.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Josh Triplett <josh@freedesktop.org>
When refactoring code to split one iteration of a too deeply
nested loop into a separate function, it inevitably makes the
indentation levels shallower (that's the sole point of such a
refactoring). With "git blame -w", you can ignore such
re-indentation and pass blame for such moved lines to the
parent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When two branches are merged that modify a subdirectory (possibly in
different intermediate steps) such that both end up identical, then
rev-list chooses only one branch. But when we filter history, we want to
keep both branches. Therefore, we must use --full-history.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can use git rev-list --parents when we list the commits to rewrite.
It is not necessary to run git rev-list --parents for each commit in the
loop.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With git-filter-branch --subdirectory-filter <subdirectory> you can
get at the history, as seen by a certain subdirectory. The history
of the rewritten branch will only contain commits that touched that
subdirectory, and the subdirectory will be rewritten to be the new
project root.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, when the local repository has a branch "frotz" and the
remote repository has a tag "frotz" (but not branch "frotz"),
"git-push frotz" mistakenly updated the tag at the remote side.
This was because the partial refname matching code was applied
independently on both source and destination side.
With this fix, when a colon-less refspec is given to git-push,
we first match it with the refs in the source repository, and
update the matching ref in the destination repository.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git push A:B" is given, and A (or B) is not a full refname
that begins with refs/, we require an unambiguous match with an
existing ref. For this purpose, a match with a local branch or
a tag (i.e. refs/heads/A and refs/tags/A) is called a "strong
match", and any other match is called a "weak match". A partial
refname is unambiguous when there is only one strong match with
any number of weak matches, or when there is only one weak match
and no other match.
However, as reported by Sparse with Ramsay Jones recently,
count_refspec_match() function had a bug where a variable in an
inner block masked a different variable of the same name, which
caused the weak matches to be ignored.
This fixes it, and adds tests for the fix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking what ref the source refspec matches, we have no
business setting the default for the destination, so move that
code lower. Also simplify the result from the code block that
matches the source side by making it set matched_src only upon
unambiguous match.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors open-coded sequence to create a new "struct ref"
and link it to the tail of dst list into a new function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This does not change functionality; just splits one block that
is deeply nested and indented out of a huge loop into a separate
function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Luiz Fernando N. Capitulino