"diff-index -m" does not mean "do not ignore merges", but means
"pretend missing files match the index".
The previous round tried to address this, but failed because
setup_revisions() ate "-m" flag before the caller had a chance
to intervene.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The second installment to libify diff brothers. The pathname
arguments are checked more strictly than before because we now
use the revision.c::setup_revisions() infrastructure.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When the executable bit is untrustworthy and when we are
comparing the tree with the working tree, we tried to reuse the
mode bits recorded in the index incorrectly (the computation was
bogus on little endian architectures). Just use mode from index
when it is a regular file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds "assume unchanged" logic, started by this message in the list
discussion recently:
<Pine.LNX.4.64.0601311807470.7301@g5.osdl.org>
This is a workaround for filesystems that do not have lstat()
that is quick enough for the index mechanism to take advantage
of. On the paths marked as "assumed to be unchanged", the user
needs to explicitly use update-index to register the object name
to be in the next commit.
You can use two new options to update-index to set and reset the
CE_VALID bit:
git-update-index --assume-unchanged path...
git-update-index --no-assume-unchanged path...
These forms manipulate only the CE_VALID bit; it does not change
the object name recorded in the index file. Nor they add a new
entry to the index.
When the configuration variable "core.ignorestat = true" is set,
the index entries are marked with CE_VALID bit automatically
after:
- update-index to explicitly register the current object name to the
index file.
- when update-index --refresh finds the path to be up-to-date.
- when tools like read-tree -u and apply --index update the working
tree file and register the current object name to the index file.
The flag is dropped upon read-tree that does not check out the index
entry. This happens regardless of the core.ignorestat settings.
Index entries marked with CE_VALID bit are assumed to be
unchanged most of the time. However, there are cases that
CE_VALID bit is ignored for the sake of safety and usability:
- while "git-read-tree -m" or git-apply need to make sure
that the paths involved in the merge do not have local
modifications. This sacrifices performance for safety.
- when git-checkout-index -f -q -u -a tries to see if it needs
to checkout the paths. Otherwise you can never check
anything out ;-).
- when git-update-index --really-refresh (a new flag) tries to
see if the index entry is up to date. You can start with
everything marked as CE_VALID and run this once to drop
CE_VALID bit for paths that are modified.
Most notably, "update-index --refresh" honours CE_VALID and does
not actively stat, so after you modified a file in the working
tree, update-index --refresh would not notice until you tell the
index about it with "git-update-index path" or "git-update-index
--no-assume-unchanged path".
This version is not expected to be perfect. I think diff
between index and/or tree and working files may need some
adjustment, and there probably needs other cases we should
automatically unmark paths that are marked to be CE_VALID.
But the basics seem to work, and ready to be tested by people
who asked for this feature.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It could be made later to show unmerged state nicer than the
default as we did for diff-files later, but this would suffice
for now. We would like to make --cc the default for 'git diff'.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes read_tree_recursive and read_tree take a struct tree
instead of a buffer. It also move the declaration of read_tree into
tree.h (where struct tree is defined), and updates ls-tree and
diff-index (the only places that presently use read_tree*()) to use
the new versions.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise we would end up linking all the unneeded stuff into git-daemon
only to link with git_default_config.
Signed-off-by: Junio C Hamano <junkio@cox.net>
With "[core] filemode = false", you can tell git to ignore
differences in the working tree file only in executable bit.
* "git-update-index --refresh" does not say "needs update" if index
entry and working tree file differs only in executable bit.
* "git-update-index" on an existing path takes executable bit
from the existing index entry, if the path and index entry are
both regular files.
* "git-diff-files" and "git-diff-index" without --cached flag
pretend the path on the filesystem has the same executable
bit as the existing index entry, if the path and index entry
are both regular files.
If you are on a filesystem with unreliable mode bits, you may need to
force the executable bit after registering the path in the index.
* "git-update-index --chmod=+x foo" flips the executable bit of the
index file entry for path "foo" on. Use "--chmod=-x" to flip it
off.
Note that --chmod only works in index file and does not look at nor
update the working tree.
So if you are on a filesystem and do not have working executable bit,
you would do:
1. set the appropriate .git/config option;
2. "git-update-index --add new-file.c"
3. "git-ls-files --stage new-file.c" to see if it has the desired
mode bits. If not, e.g. to drop executable bit picked up from the
filesystem, say "git-update-index --chmod=-x new-file.c".
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a long overdue clean-up to the code for parsing and passing
diff options. It also tightens some constness issues.
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We always show the diff as an absolute path, but pathnames to diff are
taken relative to the current working directory (and if no pathnames are
given, the default ends up being all of the current working directory).
Note that "../xyz" also works, so you can do
cd linux/drivers/char
git diff ../block
and it will generate a diff of the linux/drivers/block changes.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
All usage strings are now declared as static const char [].
This is carried over from my old git-pb branch.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This removes the separate "formats" for name and name-with-zero-
termination.
It also removes the difference between HUMAN and MACHINE formats, and
they both become DIFF_FORMAT_RAW, with the difference being just in the
line and inter-filename termination.
It also makes the code easier to understand.
... and make git-diff-files use it too. This all _should_ make the
diffcore-pathspec.c phase unnecessary, since the diff'ers now all do the
path matching early interally.
The reason I say "start using" is that we really should also limit the
index checking by name - now we limit the tree object accesses by name,
but we still check the whole index.
Still, this should help.
I got tired of maintaining almost duplicated descriptions in
diff-* brothers, both in usage string and documentation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Porcelain layers often want to find only names of changed files,
and even with diff-raw output format they end up having to pick
out only the filename. Support --name-only (and --name-only-z
for xargs -0 and cpio -0 users that want to treat filenames with
embedded newlines sanely) flag to help them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Like diff-tree, this patch makes -C option for diff-* brothers
to use only pre-image of modified files as rename/copy detection
by default. Give --find-copies-harder to use unmodified files
to find copies from as well.
This also fixes "diff-files -C" problem earlier noticed by
Linus. It was feeding the null sha1 even when the file in the
work tree was known to match what is in the index file. This
resulted in diff-files showing everything in the project.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is a halfway between debugging aid and a helper to write an
ultra-smart merge scripts. The new option takes a string that
consists of a list of "status" letters, and limits the diff
output to only those classes of changes, with two exceptions:
- A broken pair (aka "complete rewrite"), does not match D
(deleted) or N (created). Use B to look for them.
- The letter "A" in the diff-filter string does not match
anything itself, but causes the entire diff that contains
selected patches to be output (this behaviour is similar to
that of --pickaxe-all for the -S option).
For example,
$ git-rev-list HEAD |
git-diff-tree --stdin -s -v -B -C --diff-filter=BCR
shows a list of commits that have complete rewrite, copy, or
rename.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This cleans up diff_scoreopt_parse() function that is used to
parse the fractional notation -B, -C and -M option takes. The
callers are modified to check for errors and complain. Earlier
they silently ignored malformed input and falled back on the
default.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch updates diff documentation and usage strings:
- clarify the semantics of -R. It is not "output in reverse";
rather, it is "I will feed diff backwards". Semantically
they are different when -C is involved.
- describe -O in usage strings of diff-* brothers. It was
implemented, documented but not described in usage text.
Also it adds -O to diff-helper. Like -S (and unlike -M/-C/-B),
this option can work on sanitized diff-raw output produced by
the diff-* brothers. While we are at it, the call it makes to
diffcore is cleaned up to use the diffcore_std() like everybody
else, and the declaration for the low level diffcore routines
are moved from diff.h (public) to diffcore.h (private between
diff.c and diffcore backends).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A new diffcore filter diffcore-order is introduced. This takes
a text file each of whose line is a shell glob pattern. Patches
that match a glob pattern on an earlier line in the file are
output before patches that match a later line, and patches that
do not match any glob pattern are output last.
A typical orderfile for git project probably should look like
this:
README
Makefile
Documentation
*.h
*.c
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The three diff-* brothers had a sequence of calls into diffcore
that were almost identical. Introduce a new diffcore_std()
function that takes all the necessary arguments to consolidate
it. This will make later enhancements and changing the order of
diffcore application simpler.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A bug in the command line argument parsing code was making
pickaxe not to work at all in diff-cache and diff-files commands.
Embarrassingly enough, the working pickaxe in diff-tree tells me
that it was not working in these two commands from day one.
This patch fixes it.
Also updates the documentation to describe the --pickaxe-all option.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This changes the way how pathspec is used in the three diff-*
brothers. Earlier, they tried to grab as much information from
the original input and used pathspec to limit the output. This
version uses pathspec upfront to narrow the world diffcore
operates in, so "git-diff-* <arguments> some-directory" does not
look at things outside the specified subtree when finding
rename/copy or running pickaxe.
Since diff-tree already takes this view and does not feed
anything outside the specified directotires to begin with, this
patch does not have to touch that command.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When --pickaxe-all is given in addition to -S, pickaxe shows the
entire diffs contained in the changeset, not just the diffs for
the filepair that touched the sought-after string. This is
useful to see the changes in context.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This changes the argument of diff_setup() from an integer that
says if we are feeding reversed diff to a bitmask, so that later
global options can be added more easily.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The recent diff updates gave diff-cache the same ability to
filter paths, which was not properly documented.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
For later stages to reorder patches, pruning logic and rename detection
logic should not decide which delete to discard (because another entry
said it will take over the file as a rename) until the very end.
Also fix some tests that were assuming the earlier "last one is rename
or keep everything else is copy" semantics of diff-raw format, which no
longer is true.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This changes the diff-raw format again, following the mailing
list discussion. The new format explicitly expresses which one
is a rename and which one is a copy.
The documentation and tests are updated to match this change.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This moves the path selection logic from individual programs to a new
diffcore transformer (diff-tree still needs to have its own for
performance reasons). Also the header printing code in diff-tree was
tweaked not to produce anything when pickaxe is in effect and there is
nothing interesting to report. An interesting example is the following
in the GIT archive itself:
$ git-whatchanged -p -C -S'or something in a real script'
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update the diff-raw format as Linus and I discussed, except that
it does not use sequence of underscore '_' letters to express
nonexistence. All '0' mode is used for that purpose instead.
The new diff-raw format can express rename/copy, and the earlier
restriction that -M and -C _must_ be used with the patch format
output is no longer necessary. The patch makes -M and -C flags
independent of -p flag, so you need to say git-whatchanged -M -p
to get the diff/patch format.
Updated are both documentations and tests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This does not actually supress the extra headers when pickaxe is
used, but prepares enough support for diff-tree to implement it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch extends diff-cache and diff-files to report the
unmodified files to diff-core as well when -C (copy detection)
is in effect, so that the unmodified files can also be used as
the source candidates. The existing test t4003 has been
extended to cover this case.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This steals the "pickaxe" feature from JIT and make it available
to the bare Plumbing layer. From the command line, the user
gives a string he is intersted in.
Using the diff-core infrastructure previously introduced, it
filters the differences to limit the output only to the diffs
between <src> and <dst> where the string appears only in one but
not in the other. For example:
$ ./git-rev-list HEAD | ./git-diff-tree -Sdiff-tree-helper --stdin -M
would show the diffs that touch the string "diff-tree-helper".
In real software-archaeologist application, you would typically
look for a few to several lines of code and see where that code
came from.
The "pickaxe" module runs after "rename/copy detection" module,
so it even crosses the file rename boundary, as the above
example demonstrates.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This introduces the diff-core, the layer between the diff-tree
family and the external diff interface engine. The calls to the
interface diff-tree family uses (diff_change and diff_addremove)
have not changed and will not change. The purpose of the
diff-core layer is to provide an infrastructure to transform the
set of differences sent from the applications, before sending
them to the external diff interface.
The recently introduced rename detection code has been rewritten
to use the diff-core facility. When applications send in
separate creates and deletes, matching ones are transformed into
a single rename-and-edit diff, and sent out to the external diff
interface as such.
This patch also enhances the rename detection code further to be
able to detect copies. Currently this happens only as long as
copy sources appear as part of the modified files, but there
already is enough provision for callers to report unmodified
files to diff-core, so that they can be also used as copy source
candidates. Extending the callers this way will be done in a
separate patch.
Please see and marvel at how well this works by trying out the
newly added t/t4003-diff-rename-1.sh test script.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix various things that sparse complains about:
- use NULL instead of 0
- make sure we declare everything properly, or mark it static
- use proper function declarations ("fn(void)" instead of "fn()")
Sparse is always right.
This cleans up the way calls are made into the diff core from diff-tree
family and diff-helper. Earlier, these programs had "if
(generating_patch)" sprinkled all over the place, but those ugliness are
gone and handled uniformly from the diff core, even when not generating
patch format.
This also allowed diff-cache and diff-files to acquire -R
(reverse) option to generate diff in reverse. Users of
diff-tree can swap two trees easily so I did not add -R there.
[ Linus' note: I'll add -R to "diff-tree" too, since a "commit
diff" doesn't have another tree to switch around: the other
tree is always the parent(s) of the commit ]
Also -M<digits-as-mantissa> suggestion made by Linus has been
implemented.
Documentation updates are also included.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fixes all in-code names that leaved during "big name change".
Signed-off-by: Alexey Nezhdanov <snake@penza-gsm.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This rips out the rename detection engine from diff-helper and moves it
to the diff core, and updates the internal calling convention used by
diff-tree family into the diff core. In order to give the same option
name to diff-tree family as well as to diff-helper, I've changed the
earlier diff-helper '-r' option to '-M' (stands for Move; sorry but the
natural abbreviation 'r' for 'rename' is already taken for 'recursive').
Although I did a fair amount of test with the git-diff-tree with
existing rename commits in the core GIT repository, this should still be
considered beta (preview) release. This patch depends on the diff-delta
infrastructure just committed.
This implements almost everything I wanted to see in this series of
patch, except a few minor cleanups in the calling convention into diff
core, but that will be a separate cleanup patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Raw hashes should be unsigned char.
- String functions want signed char.
- Hash and compress functions want unsigned char.
Signed-off By: Brian Gerst <bgerst@didntduck.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Junio C Hamano