So they can be used on the good array too.
This is done by renaming many functions and some variables to
remove "skip" in the name, and by adding a
"struct sha1_array *array" argument where needed.
While at it, make the second argument to "lookup_sha1_array"
const. It becomes "const unsigned char *sha1".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch moves some function calls into "bisect_next_exit" so
that functions are nesting less.
The call to "bisect_rev_setup" is moved from "bisect_common" into
"bisect_next_exit" and the call to "read_bisect_refs" from
"bisect_rev_setup" into "bisect_next_exit".
While at it, "rev_argv" is moved into "bisect_rev_setup".
This will make it easier and cleaner to implement checking merge
bases.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because we will use other instances of this struct.
The "rev_argv_push" function is changed into 2 functions
"argv_array_push" and "argv_array_push_sha1" that take a "struct
argv_array *" as first argument. And these functions are used to
simplify "bisect_rev_setup".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will make it easier to use good revisions for checking merge
bases later.
To simplify the code, a new "sha1_array_push" function is also
introduced.
And while at it we move the earlier part of the code to fill the
argv that is passed to "setup_revisions", so that all this code is
now completely after "read_bisect_refs".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch is a minor clean up right now, but the new function
will evolve and be used more later.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch creates a "struct sha1_array" to store skipped revisions,
so that the same struct can be reused in a later patch for good
revisions.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because it has been replaced by "--next-exit".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The goal of this patch is to port more shell code from the "bisect_next"
function in "git-bisect.sh" to C code in "builtin-bisect--helper.c".
So we port the code that interprets the bisection result and stops or
continues (by checking out the next revision) the bisection process.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So we can easily reuse the code in a later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a cleanup patch to make it easier to use the
"show_bisect_vars" function and take advantage of the rev_list_info
struct.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch removes the last static variables that were used in
the "show_commit" function.
To do that, we create a new "rev_list_info" struct that we will pass
in the "void *data" argument to "show_commit".
This means that we have to change the first argument to
"show_bisect_vars" too.
While at it, we also remove a "struct commit_list *list" variable
in "cmd_rev_list" that is not really needed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing:
eval "git bisect--helper --next-vars" | {
while read line
do
echo "$line &&"
done
echo ':'
}
the result code comes from the last "echo ':'", not from running
"git bisect--helper --next-vars".
This patch gets rid of the need to string together the line from
the output of "git bisect--helper" with "&&" in the calling script
by making "git bisect--helper --next-vars" return output variables
already in that format.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of "int show_all, int show_tried" we now only pass "int flags",
because we will add one more flag in a later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed because "git bisect--helper" must read bisect paths
in "$GIT_DIR/BISECT_NAMES", so that a bisection can be performed only
on commits that touches paths in this file.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch implements a new "git bisect--helper" builtin plumbing
command that will be used to migrate "git-bisect.sh" to C.
We start by implementing only the "--next-vars" option that will
read bisect refs from "refs/bisect/", and then compute the next
bisect step, and output shell variables ready to be eval'ed by
the shell.
At this step, "git bisect--helper" ignores the paths that may
have been put in "$GIT_DIR/BISECT_NAMES". This will be fixed in a
later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
instead of the specific one that was simpler but less efficient.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch implements a new "filter_skip" function in C in
"bisect.c" that will later replace the existing implementation in
shell in "git-bisect.sh".
An array is used to store the skipped commits. But the array is
not yet fed anything.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch creates new "bisect.c" and "bisect.h" files and move
bisect related code into these files.
While at it, we also remove some include directives that are not
needed any more from the beginning of "builtin-rev-list.c".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "bisect_list" variable was static for no reason as it is only used
in the "cmd_rev_list" function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches "git rev-list --bisect-vars" to output an estimate
of the number of bisection step left _after the current one_ along with
the other variables it already outputs.
This patch also makes "git-bisect.sh" display this number of steps left
_after the current one_, along with the estimate of the number of
revisions left to test (after the current one).
Here is a table to help analyse what should be the best estimate for
the number of bisect steps left.
N : linear case --> probabilities --> best
-------------------------------------------------------------
1 : G-B --> 0 --> 0
2 : G-U1-B --> 0 --> 0
3 : G-U1-U2-B --> 0(1/3) 1(2/3) --> 1
4 : G-U1-U2-U3-B --> 1 --> 1
5 : G-U1-U2-U3-U4-B --> 1(3/5) 2(2/5) --> 1
6 : G-U1-U2-U3-U4-U5-B --> 1(2/6) 2(4/6) --> 2
7 : G-U1-U2-U3-U4-U5-U6-B --> 1(1/7) 2(6/7) --> 2
8 : G-U1-U2-U3-U4-U5-U6-U7-B --> 2 --> 2
9 : G-U1-U2-U3-U4-U5-U6-U7-U8-B --> 2(7/9) 3(2/9) --> 2
10: G-U1-U2-U3-U4-U5-U6-U7-U8-U9-B --> 2(6/10)3(4/10)--> 2
In the column "N", there is the number of revisions that could _now_
be the first bad commit we are looking for.
The "linear case" column describes the linear history corresponding to
the number in column N. G means good, B means bad, and Ux means
unknown. Note that the first bad revision we are looking for can be
any Ux or B.
In the "probabilities" column, there are the different outcomes in
number of steps with the odds of each outcome in parenthesis
corresponding to the linear case.
The "best" column gives the most accurate estimate among the different
outcomes in the "probabilities" column.
We have the following:
best(2^n) == n - 1
and for any x between 0 included and 2^n excluded, the probability for
n - 1 steps left looks like:
P(2^n + x) == (2^n - x) / (2^n + x)
and P(2^n + x) < 0.5 means 2^n < 3x
So the algorithm used in this patch calculates 2^n and x, and then
choose between returning n - 1 and n.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before d467a52 ("Make '--decorate' set an explicit 'show_decorations'
flag", Nov 3 2008), commit decorations were shown whenever they exist, and
distances stored in them by "git rev-list --bisect-all" were automatically
shown. d467a52 changed the rule so that commit decorations are not shown
unless rev_info explicitly asks to, with its show_decorations bit, but
forgot that the ones "git rev-list --bisect-all" adds need to be shown.
This patch fixes this old breakage.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already support decorating commits by tags or branches that point to
them, but especially when we are looking at multiple branches together,
we sometimes want to see _how_ we reached a particular commit.
We can abuse the '->util' field in the commit to keep track of that as
we walk the commit lists, and get a reasonably useful view into which
branch or tag first reaches that commit.
Of course, if the commit is reachable through multiple sources (which is
common), our particular choice of "first" reachable is entirely random
and depends on the particular path we happened to follow.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
User notifications are presented as 'git cmd', and code comments
are presented as '"cmd"' or 'git's cmd', rather than 'git-cmd'.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This has been broken in v1.6.0 due to the reorganization of
the revision option parsing code. The "-i" is completely
ignored, but works fine in "git log --grep -i".
What happens is that the code for "-i" looks for
revs->grep_filter; if it is NULL, we do nothing, since there
are no grep filters. But that is obviously not correct,
since we want it to influence the later --grep option. Doing
it the other way around works, since "-i" just impacts the
existing grep_filter option.
Instead, we now always initialize the grep_filter member and
just fill in options and patterns as we get them. This means
that we can no longer check grep_filter for NULL, but
instead must check the pattern list to see if we have any
actual patterns.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nick Andrew noticed that rev-list lets --quiet option to be parsed by
underlying diff_options parser but did not pick up the result. This
resulted in --quiet option to become effectively a no-op.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reading rev-list parameters from the command line can be reused by
commands other than rev-list. Move this function to more "library-ish"
place to promote code reuse.
Signed-off-by: Adam Brewster <asb@bu.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the --graph option, the graph already outputs 'o' instead of '*'
for boundary commits. Make it emit '<' or '>' when --left-right is
specified.
(This change also disables the '^' prefix for UNINTERESTING commits.
The graph code currently doesn't print anything special for these
commits, since it assumes no UNINTERESTING, non-BOUNDARY commits are
displayed. This is potentially a bug if UNINTERESTING non-BOUNDARY
commits can actually be displayed via some code path.)
[jc: squashed the left-right change from Dscho and Adam's fixup into one]
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option causes a text-based representation of the history to be
printed to the left of the normal output.
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change allows parent rewriting to be performed without causing
the log and rev-list commands to print the parents.
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-rev-list accepts --reverse, as documented in
the manpage, but the usage string does not list it.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These flags are already known to rev-parse and have the same meaning.
This patch allows to run gitk as follows:
gitk --branches --not --remotes
to show only your local work.
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A failure in prepare_revision_walk can be caused by
a not parseable object.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's really not very easy to visualize the commit walker, because - on
purpose - it obvously doesn't show the uninteresting commits!
This adds a "--show-all" flag to the revision walker, which will make
it show uninteresting commits too, and they'll have a '^' in front of
them (it also fixes a logic error for !verbose_header for boundary
commits - we should show the '-' even if left_right isn't shown).
A separate patch to gitk to teach it the new '^' was sent
to paulus. With the change in place, it actually is interesting
even for the cases that git doesn't have any problems with, ie
for the kernel you can do:
gitk -d --show-all v2.6.24..
and you see just how far down it has to parse things to see it all. The
use of "-d" is a good idea, since the date-ordered toposort is much better
at showing why it goes deep down (ie the date of some of those commits
after 2.6.24 is much older, because they were merged from trees that
weren't rebased).
So I think this is a useful feature even for non-debugging - just to
visualize what git does internally more.
When it actually breaks out due to the "everybody_uninteresting()"
case, it adds the uninteresting commits (both the one it's looking at
now, and the list of pending ones) to the list
This way, we really list *all* the commits we've looked at.
Because we now end up listing commits we may not even have been parsed
at all "show_log" and "show_commit" need to protect against commits
that don't have a commit buffer entry.
That second part is debatable just how it should work. Maybe we shouldn't
show such entries at all (with this patch those entries do get shown, they
just don't get any message shown with them). But I think this is a useful
case.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A NUL byte at beginning of file, or just after a newline
would provoke an invalid buf[-1] access in a few places.
* builtin-grep.c (cmd_grep): Don't access buf[-1].
* builtin-pack-objects.c (get_object_list): Likewise.
* builtin-rev-list.c (read_revisions_from_stdin): Likewise.
* bundle.c (read_bundle_header): Likewise.
* server-info.c (read_pack_info_file): Likewise.
* transport.c (insert_packed_refs): Likewise.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We cannot tell a node that has been checked and found not to be
interesting (which does not have the TREECHANGE flag) from a
node that hasn't been checked if it is interesting or not,
without relying on something else, such as object->parsed.
But an object can get the "parsed" flag for other reasons.
Which means that "TREECHANGE" has the wrong polarity.
This changes the way how the path pruning logic marks an
uninteresting commits. From now on, we consider a commit
interesting by default, and explicitly mark the ones we decided
to prune. The flag is renamed to "TREESAME".
Then, this fixes the logic to show the early output with
incomplete pruning. It basically says "a commit that has
TREESAME set is kind-of-UNINTERESTING", but obviously in a
different way than an outright UNINTERESTING commit. Until we
parse and examine enough parents to determine if a commit
becomes surely "kind-of-UNINTERESTING", we avoid rewriting
the ancestry so that later rounds can fix things up.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some uses of git-rev-list are to run it with --objects to see if
a range of objects between two or more commits is fully connected
or not. In such a case the caller doesn't care about the actual
object names or hash hints so formatting this data only for it to
be dumped to /dev/null by a redirect is a waste of CPU time. If
all the caller needs is the exit status then --quiet can be used
to bypass the commit and object formatting.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When the body of the commit log message contains a non-ASCII character,
format-patch correctly emitted the encoding header to mark the resulting
message as such. However, if the original message was fully ASCII, the
command line switch "-s" was given to add a new sign-off, and
the signer's name was not ASCII only, the resulting message would have
contained non-ASCII character but was not marked as such.
This was cherry-picked from the fix in 'master'
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes the unnecessary indirection of "revs->prune_fn",
since that function is always the same one (or NULL), and there
is in fact not even an abstraction reason to make it a function
(i.e. its not called from some other file and doesn't allow us
to keep the function itself static or anything like that).
It then just replaces it with a bit that says "prune or not",
and if not pruning, every commit gets TREECHANGE.
That in turn means that
- if (!revs->prune_fn || (flags & TREECHANGE))
- if (revs->prune_fn && !(flags & TREECHANGE))
just become
- if (flags & TREECHANGE)
- if (!(flags & TREECHANGE))
respectively.
Together with adding the "single_parent()" helper function, the "complex"
conditional now becomes
if (!(flags & TREECHANGE) && rev->dense && single_parent(commit))
continue;
Also indirection of "revs->dense" checking is thrown away the
same way, because TREECHANGE bit is set appropriately now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the body of the commit log message contains a non-ASCII character,
format-patch correctly emitted the encoding header to mark the resulting
message as such. However, if the original message was fully ASCII, the
command line switch "-s" was given to add a new sign-off, and
the signer's name was not ASCII only, the resulting message would have
contained non-ASCII character but was not marked as such.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is Junio's patch with some stuff to make --bisect-all
compatible with --bisect-vars.
This option makes it possible to see all the potential
bisection points. The best ones are displayed first.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This changes the interporate() to replace entries with NULL values
by the empty string, and uses it to interpolate missing fields in
custom format output used in git-log and friends. It is most useful
to avoid <unknown> output from %b format for a commit log message
that lack any body text.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier commit ce0cbad77 broke rev-list --bisect to cause it
segfault when the resulting set is empty.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This factorises some code and make a big function smaller.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder