From the output of ls-files, we remove all but the leftmost path
component and then we eliminate duplicates. We do this in a while loop,
which is a performance bottleneck when the number of iterations is large
(e.g. for 60000 files in linux.git).
$ COMP_WORDS=(git status -- ar) COMP_CWORD=3; time _git
real 0m11.876s
user 0m4.685s
sys 0m6.808s
Replacing the loop with the cut command improves performance
significantly:
$ COMP_WORDS=(git status -- ar) COMP_CWORD=3; time _git
real 0m1.372s
user 0m0.263s
sys 0m0.167s
The measurements were done with Msys2 bash, which is used by Git for
Windows.
When filtering the ls-files output we take care not to touch absolute
paths. This is redundant, because ls-files will never output absolute
paths. Remove the unnecessary operations.
The issue was reported here:
https://github.com/git-for-windows/git/issues/1533
Signed-off-by: Clemens Buchacher <drizzd@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new function __git_complete_common can take over this job with
less code to maintain.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many builtin commands use parseopt which can expose the option list
via --git-completion-helper but do not have explicit support in
git-completion.bash. This patch detects those commands and uses
__gitcomp_builtin for option completion.
This does not pollute the command name completion though. "git <tab>"
will show you the same set as before. This only kicks in when you type
the correct command name.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The established way to update the completion script in an already
running shell is to simply source it again: this brings in any new
--options and features, and clears caching variables. E.g. it clears
the variables caching the list of (all|porcelain) git commands, so
when they are later lazy-initialized again, then they will list and
cache any newly installed commmands as well.
Unfortunately, since d401f3debc (git-completion.bash: introduce
__gitcomp_builtin, 2018-02-09) and subsequent patches this doesn't
work for a lot of git commands' options. To eliminate a lot of
hard-to-maintain hard-coded lists of options, those commits changed
the completion script to use a bunch of programmatically created and
lazy-initialized variables to cache the options of those builtin
porcelain commands that use parse-options. These variables are not
cleared upon sourcing the completion script, therefore they continue
caching the old lists of options, even when some commands recently
learned new options or when deprecated options were removed.
Always 'unset' these variables caching the options of builtin commands
when sourcing the completion script.
Redirect 'unset's stderr to /dev/null, because ZSH's 'unset' complains
if it's invoked without any arguments, i.e. no variables caching
builtin's options are set. This can happen, if someone were to source
the completion script twice without completing any --options in
between. Bash stays silent in this case.
Add tests to ensure that these variables are indeed cleared when the
completion script is sourced; not just the variables caching options,
but all other caching variables, i.e. the variables caching commands,
porcelain commands and merge strategies as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Completion of tag names has worked for the short -d/-v options since
88e21dc746 ("Teach bash about completing arguments for git-tag",
2007-08-31). The long options were not added to "git tag" until many
years later, in c97eff5a95 ("git-tag: introduce long forms for the
options", 2011-08-28).
Extend tag name completion to --delete/--verify.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two subcommands are added for completion: merge and get-ref. get-ref
is more like plumbing. But since it does not share the prefix with any
other subcommands, it won't slow anybody down.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new subcommand that takes these options is 'git notes edit'. Just
accept the options from subcommands since we handle them the same way
in builtin/notes.c anyway. If a user does
git prune --reuse-message=...
just let the command catches that error when it's executed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also adds completion for 'git notes remove' and 'git notes edit'.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is not a strong reason to hide this option, and git-merge already
completes this one. Let's allow to complete this for all commands (and
let git-completion.bash do the suppressing if needed).
This makes --rerere-autoupdate completable for am, cherry-pick and
revert. rebase completion is fixed manually because it's a shell
script and does not benefit from --git-completion-helper.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some projects contributions from groups are only accepted from a
common group email address. But every individual may want to receive
replies to her own personal address. That's what we have 'Reply-To'
headers for in SMTP. So introduce an optional '--reply-to' command
line option.
This patch re-uses the $reply_to variable. This could break
out-of-tree patches!
Signed-off-by: Christian Ludwig <chrissicool@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Among the "in progress" commands, only git-am and git-merge do not
support --quit. Support --quit in git-am too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new command `git rebase --show-current-patch` is useful for seeing
the commit related to the current rebase state. Some however may find
the "git show" command behind it too limiting. You may want to
increase context lines, do a diff that ignores whitespaces...
For these advanced use cases, the user can execute any command they
want with the new pseudo ref REBASE_HEAD.
This also helps show where the stopped commit is from, which is hard
to see from the previous patch which implements --show-current-patch.
Helped-by: Tim Landscheidt <tim@tim-landscheidt.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is useful to see the full patch while resolving conflicts in a
rebase. The only way to do it now is
less .git/rebase-*/patch
which could turn out to be a lot longer to type if you are in a
linked worktree, or not at top-dir. On top of that, an ordinary user
should not need to peek into .git directory. The new option is
provided to examine the patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pointing the user to $GIT_DIR/rebase-apply may encourage them to mess
around in there, which is not a good thing. With this, the user does
not have to keep the path around somewhere (because after a couple of
commands, the path may be out of scrollback buffer) when they need to
look at the patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command allows to delete a worktree. Like 'move' you cannot
remove the main worktree, or one with submodules inside [1].
For deleting $GIT_WORK_TREE, Untracked files or any staged entries are
considered precious and therefore prevent removal by default. Ignored
files are not precious.
When it comes to deleting $GIT_DIR, there's no "clean" check because
there should not be any valuable data in there, except:
- HEAD reflog. There is nothing we can do about this until somebody
steps up and implements the ref graveyard.
- Detached HEAD. Technically it can still be recovered. Although it
may be nice to warn about orphan commits like 'git checkout' does.
[1] We do 'git status' with --ignore-submodules=all for safety
anyway. But this needs a closer look by submodule people before we
can allow deletion. For example, if a submodule is totally clean,
but its repo not absorbed to the main .git dir, then deleting
worktree also deletes the valuable .submodule repo too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command allows to relocate linked worktrees. Main worktree cannot
(yet) be moved.
There are two options to move the main worktree, but both have
complications, so it's not implemented yet. Anyway the options are:
- convert the main worktree to a linked one and move it away, leave
the git repository where it is. The repo essentially becomes bare
after this move.
- move the repository with the main worktree. The tricky part is make
sure all file descriptors to the repository are closed, or it may
fail on Windows.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --prune-tags option to git-fetch, along with fetch.pruneTags
config option and a -P shorthand (-p is --prune). This allows for
doing any of:
git fetch -p -P
git fetch --prune --prune-tags
git fetch -p -P origin
git fetch --prune --prune-tags origin
Or simply:
git config fetch.prune true &&
git config fetch.pruneTags true &&
git fetch
Instead of the much more verbose:
git fetch --prune origin 'refs/tags/*:refs/tags/*' '+refs/heads/*:refs/remotes/origin/*'
Before this feature it was painful to support the use-case of pulling
from a repo which is having both its branches *and* tags deleted
regularly, and have our local references to reflect upstream.
At work we create deployment tags in the repo for each rollout, and
there's *lots* of those, so they're archived within weeks for
performance reasons.
Without this change it's hard to centrally configure such repos in
/etc/gitconfig (on servers that are only used for working with
them). You need to set fetch.prune=true globally, and then for each
repo:
git -C {} config --replace-all remote.origin.fetch "refs/tags/*:refs/tags/*" "^\+*refs/tags/\*:refs/tags/\*$"
Now I can simply set fetch.pruneTags=true in /etc/gitconfig as well,
and users running "git pull" will automatically get the pruning
semantics I want.
Even though "git remote" has corresponding "prune" and "update
--prune" subcommands I'm intentionally not adding a corresponding
prune-tags or "update --prune --prune-tags" mode to that command.
It's advertised (as noted in my recent "git remote doc: correct
dangerous lies about what prune does") as only modifying remote
tracking references, whereas any --prune-tags option is always going
to modify what from the user's perspective is a local copy of the tag,
since there's no such thing as a remote tracking tag.
Ideally add_prune_tags_to_fetch_refspec() would be something that
would use ALLOC_GROW() to grow the 'fetch` member of the 'remote'
struct. Instead I'm realloc-ing remote->fetch and adding the
tag_refspec to the end.
The reason is that parse_{fetch,push}_refspec which allocate the
refspec (ultimately remote->fetch) struct are called many places that
don't have access to a 'remote' struct. It would be hard to change all
their callsites to be amenable to carry around the bookkeeping
variables required for dynamic allocation.
All the other callers of the API first incrementally construct the
string version of the refspec in remote->fetch_refspec via
add_fetch_refspec(), before finally calling parse_fetch_refspec() via
some variation of remote_get().
It's less of a pain to deal with the one special case that needs to
modify already constructed refspecs than to chase down and change all
the other callsites. The API I'm adding is intentionally not
generalized because if we add more of these we'd probably want to
re-visit how this is done.
See my "Re: [BUG] git remote prune removes local tags, depending on
fetch config" (87po6ahx87.fsf@evledraar.gmail.com;
https://public-inbox.org/git/87po6ahx87.fsf@evledraar.gmail.com/) for
more background info.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options for "worktree add" are:
--checkout
--guess-remote
--lock
--track
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--color
--format=
--ignore-case
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are --null and --show-stash.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable option is --gpg-sign
In-progress options like --continue will be part of --git-completion-helper
then filtered out by _git_revert() unless the operation is in
progress. This helps keep marking of these operations in just one place.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--intent-to-add
--quiet
--recurse-submodules
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is really nice. Since pull_options[] already declares all
passthru options to 'merge' or 'fetch', a single
git pull --git-completion-helper
would provide all completable options (--no- variants are a separate
issue). Dead shell variables can now be deleted.
New completable options are:
--allow-unrelated-histories
--ipv4
--ipv6
--jobs
--refmap=
--signoff
--strategy-option=
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--allow-empty (notes add and notes append)
--for-rewrite= (notes copy)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New completable options are:
--allow-unrelated-histories
--message=
--overwrite-ignore
--signoff
--strategy-option=
--summary
--verify
The variable $__git_merge_options remains because _git_pull() still
needs it. It will soon be gone after _git_pull() is updated.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are --quiet and --upload-pack=.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable option is --separate-git-dir=.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--connectivity-only
--dangling
--progress
--reflogs
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New completable options:
--deepen=
--ipv4
--ipv6
--jobs=
--multiple
--progress
--refmap=
--shallow-exclude=
--shallow-since=
--update-head-ok
Since _git_pull() needs fetch options too, $__git_fetch_options
remains. This variable will soon be gone after _git_pull() is updated.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we can't automatically extract diff options for completion yet,
difftool will take all options from $__git_diff_common_options. This
brings _a lot_ more completable options to difftool.
--ignore-submodules is added to $__git_diff_common_options to avoid
regression in difftool. But it's a good thing anyway even for other
diff commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new comletable options are:
--branch
--gpg-sign
--long
--no-post-rewrite
--null
--porcelain
--status
--allow-empty is no longer completable because it's a hidden option
since 4741edd549 (Remove deprecated OPTION_BOOLEAN for parsing arguments
- 2013-08-03)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clemens Buchacher