git.kernel.org no longer uses gitweb but has switched to cgit.
Info about this can be found on: https://www.kernel.org/pelican.html
or simply by looking at http://git.kernel.org . This is change since
2013-03-01.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of what is in gitweb.txt it has been pulled directly from the
README and INSTALL files of gitweb.
Current version is somewhat based on structure of SVN::Web manpage
(one of web interfaces for Subversion).
gitweb.conf(5) i.e. gitweb configuration manpage now refers to
appropriate sections in gitweb(1). gitweb/README now refers to
gitweb/INSTALL and gitweb(1) manpage. gitweb/INSTALL now refers to
gitweb.conf(5) and gitweb(1).
Inspired-by: Drew Northup <drew.northup@maine.edu>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much of what is in gitweb.conf.txt has been pulled directly from the
README file of gitweb. The manpage was supplemented with description
of missing gitweb config variables, and with description of gitweb's
%features.
There remains a bit of redundancy, which should be reduced if
possible... but I think some of duplication of information is
inevitable.
[jn: Improved, extended, removed duplicate info from README]
Signed-off-by: Drew Northup <drew.northup@maine.edu>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because of backward compatibility we cannot change gitweb to always
use /etc/gitweb.conf (i.e. even if gitweb_config.perl exists). For
common system-wide settings we therefore need separate configuration
file: /etc/gitweb-common.conf.
Long description:
gitweb currently obtains configuration from the following sources:
1. per-instance configuration file (default: gitweb_conf.perl)
2. system-wide configuration file (default: /etc/gitweb.conf)
If per-instance configuration file exists, then system-wide
configuration is _not used at all_. This is quite untypical and
suprising behavior.
Moreover it is different from way git itself treats /etc/git.conf. It
reads in stuff from /etc/git.conf and then local repos can change or
override things as needed. In fact this is quite beneficial, because
it gives site admins a simple and easy way to give an automatic hint
to a repo about things the admin would like.
On the other hand changing current behavior may lead to the situation,
where something in /etc/gitweb.conf may interfere with unintended
interaction in the local repository. One solution would be to
_require_ to do explicit include; with read_config_file() it is now
easy, as described in gitweb/README (description introduced in this
commit).
But as J.H. noticed we cannot ask people to modify their per-instance
gitweb config file to include system-wide settings, nor we can require
them to do this.
Therefore, as proposed by Junio, for gitweb to have centralized config
elements while retaining backwards compatibility, introduce separate
common system-wide configuration file, by default /etc/gitweb-common.conf
Noticed-by: Drew Northup <drew.northup@maine.edu>
Helped-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Inspired-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Almost straightformard moving of "How to configure gitweb for your
local system" section from gitweb/README to gitweb/INSTALL, as it is
about build time configuration. Updated references to it.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the $projects_list_group_categories option which, if enabled,
will result in grouping projects by category on the project list page.
The category is specified for each project by the $GIT_DIR/category file
or the 'gitweb.category' variable in its configuration file. By default,
projects are put in the $project_list_default_category category.
Note:
- Categories are always sorted alphabetically, with projects in
each category sorted according to the globally selected $order.
- When displaying a subset of all the projects (page limiting), the
category headers are only displayed for projects present on the page.
The feature is inspired from Sham Chukoury's patch for the XMMS2
gitweb, but has been rewritten for the current gitweb code. The CSS
for categories is inspired from Gustavo Sverzut Barbieri's patch to
group projects by path.
Thanks to Florian Ragwitz for Perl tips.
[jn: Updated to post restructuring projects list generation, fixed bugs,
added very basic test in t9500 that there are no warnings from Perl.]
Signed-off-by: Sebastien Cevey <seb@cine7.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I found that some doubled words had snuck back into projects from which
I'd already removed them, so now there's a "syntax-check" makefile rule in
gnulib to help prevent recurrence.
Running the command below spotted a few in git, too:
git ls-files | xargs perl -0777 -n \
-e 'while (/\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt])\s+\1\b/gims)' \
-e '{$n=($` =~ tr/\n/\n/ + 1); ($v=$&)=~s/\n/\\n/g;' \
-e 'print "$ARGV:$n:$v\n"}'
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Global variables $my_url, $my_uri and $base_url have subtle interactions
that need to be desribed, and can be influenced most cleanly by
$per_request_config.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow selecting whether configuration file should be (re)parsed on each
request (the default, for backward compatibility with configurations that
change per session, see commit 7f425db (gitweb: allow configurations that
change with each request, 2010-07-30)), or whether should it be parsed only
once (for performance speedup for persistent environments, though currently
only FastCGI is able to make use of it, when flexibility is not important).
You can also have configuration file parsed only once, but have parts of
configuration (re)evaluated once per each request.
This is done by introducing $per_request_config variable: if set to code
reference, this code would be run once per request, while config file would
be parsed only once. For example gitolite's contrib/gitweb/gitweb.conf
fragment mentioned in 7f425db could be rewritten as
our $per_request_config = sub {
$ENV{GL_USER} = ($cgi && $cgi->remote_user) || "gitweb";
};
to make use of this feature.
If $per_request_config is not a code reference, it is taken to be boolean
variable, to choose between running config file for each request
(flexibility), and running config file only once (performance in
persistent environments).
The default value for $per_request_config is 1 (true), which means that
old configuration that require to change per session (like gitolite's)
will keep working.
While at it, make it so evaluate_git_version() is run only once.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow build-time/run-time configuration of the highlight executable
(must be the one from http://www.andre-simon.de due to assumptions
about parameters and output). Defaults to previous behavior which
assumes that highlight is available on the server PATH. However, if
this is not the case, the path to the highlight executable can be
configured at build time as a configuration variable
HIGHLIGHT_BIN = /path/to/highlight
or at runtime by configuring GITWEB_CONFIG
$highlight_bin = /path/to/highlight
Signed-off-by: Christopher Wilson <cwilson@cdwilson.us>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new subdirectory called 'static' in gitweb/, and move
all static files required by gitweb.cgi when running, which means
styles, images and Javascript code. This should make gitweb more
readable and easier to maintain.
Update t/gitweb-lib.sh to reflect this change.The install-gitweb
now also include moving of static files into 'static' subdirectory
in target directory: update Makefile, gitweb's INSTALL, README and
Makefile accordingly.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Petr Baudis <pasky@ucw.cz>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The build system added support minifying gitweb.js through a
JavaScript minifier, but most minifiers come with support for
minifying CSS files as well, so we should use it if we can.
This patch will add the same facilities to gitweb.css that
gitweb.js has for minification. That does not mean that they
will use the same minifier though, as it is not safe to assume
that all JavaScript minifiers will also minify CSS files.
This patch also adds the GITWEB_PROGRAMS variable to the Makefile
to keep a list of potential gitweb dependencies separate from
OTHER_PROGRAMS when we need to know just the gitweb dependencies.
Though the bandwidth savings will not be as dramatic as with
the JavaScript minifier, every byte saved is important.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds in the gitweb/README file a description of how to use gitweb
with several project roots using apache virtualhost rewrite rules.
Signed-off-by: Sylvain Rabot <sylvain@abstraction.fr>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes slightly the behavior of gitweb, so that it verifies
that the box isn't inundated with before attempting to serve gitweb.
If the box is overloaded, it basically returns a 503 Server Unavailable
until the load falls below the defined threshold. This helps dramatically
if you have a box that's I/O bound, reaches a certain load and you
don't want gitweb, the I/O hog that it is, increasing the pain the
server is already undergoing.
This behavior is controlled by $maxload configuration variable.
Default is a load of 300, which for most cases should never be hit.
Unset it (set it to undefined value, i.e. undef) to turn off checking.
Currently it requires that '/proc/loadavg' file exists, otherwise the
load check is bypassed (load is taken to be 0). So platforms that do
not implement '/proc/loadavg' currently cannot use this feature
(provisions are included for additional checks to be added by others).
There is simple test in t/t9501-gitweb-standalone-http-status.sh to
check that it correctly returns "503 Service Unavailable" if load is
too high, and also if there are any Perl warnings or errors.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'blame_incremental' view, which uses "git blame --incremental"
and JavaScript (Ajax), where 'blame' use "git blame --porcelain".
* gitweb generates initial info by putting file contents (from
"git cat-file") together with line numbers in blame table
* then gitweb makes web browser JavaScript engine call startBlame()
function from gitweb.js
* startBlame() opens XMLHttpRequest connection to 'blame_data' view,
which in turn calls "git blame --incremental" for a file, and
streams output of git-blame to JavaScript (gitweb.js)
* XMLHttpRequest event handler updates line info in blame view as soon
as it gets data from 'blame_data' (from server), and it also updates
progress info
* when 'blame_data' ends, and gitweb.js finishes updating line info,
it fixes colors to match (as far as possible) ordinary 'blame' view,
and updates information about how long it took to generate page.
Gitweb deals with streamed 'blame_data' server errors by displaying
them in the progress info area (just in case).
The 'blame_incremental' view tries to be equivalent to 'blame' action;
there are however a few differences in output between 'blame' and
'blame_incremental' view:
* 'blame_incremental' always used query form for this part of link(s)
which is generated by JavaScript code. The difference is visible
if we use path_info link (pass some or all arguments in path_info).
Changing this would require implementing something akin to href()
subroutine from gitweb.perl in JavaScript (in gitweb.js).
* 'blame_incremental' always uses "rowspan" attribute, even if
rowspan="1". This simplifies code, and is not visible to user.
* The progress bar and progress info are still there even after
JavaScript part of 'blame_incremental' finishes work.
Note that currently no link generated by gitweb leads to this new view.
This code is based on patch by Petr Baudis <pasky@suse.cz> patch, which
in turn was tweaked up version of Fredrik Kuivinen <frekui@gmail.com>'s
proof of concept patch.
This patch adds GITWEB_JS compile configuration option, and modifies
git-instaweb.sh to take gitweb.js into account. The code for
git-instaweb.sh was taken from Pasky's patch.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When combining "dumb client" and human-friendly access by using the
'.git' extension to switch between the two, make sure the AliasMatch
covers the entire request. Without a full match, a request for
http://git.example.com/project/shortlog/branch..gitsomething
would result in a 404 because the server would try to access the
the project 'project/shortlog/branch.'
The solution is still not bulletproof, so document the possible failing
case.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a gitweb configuration variable $prevent_xss that disables features
to prevent content in repositories from launching cross-site scripting
(XSS) attacks in the gitweb domain. Currently, this option makes gitweb
ignore README.html (a better solution may be worked out in the future)
and serve a blob_plain file of an untrusted type with
"Content-Disposition: attachment", which tells the browser not to show
the file at its original URL.
The XSS prevention is currently off by default.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One had to configure gitweb for it to find static files (stylesheets,
images) when using path_info URLs. Now that it is not necessary
thanks to adding BASE element to HTML head if needed, update README to
reflect this fact.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document some possible Apache configurations when the path_info feature
is enabled in gitweb.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update and extend information about $projects_list file format in
gitweb/README and in gitweb/INSTALL.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add a few more hints for how to setup and configure gitweb as described
[jc: with a fix from Mike Hommey]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From a distribution point of view, configuration files for applications
should reside in /etc/. On the other hand it's convenient for multiple
instances of gitweb (e.g. virtual web servers on a single machine) to have
a per-instance configuration file, just as gitweb currently supports
through the file gitweb_config.perl next to the cgi.
To support both at runtime, this commit introduces GITWEB_CONFIG_SYSTEM as
a system-wide configuration file which will be used as a fallback if the
config file sprecified throug GITWEB_CONFIG does not exist.
See also
http://bugs.debian.org/450592
Signed-off-by: Gerrit Pape <pape@smarden.org>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now gitweb checks if gitweb.owner exists before trying to get filesystem's
owner.
Allow to use configuration variable gitweb.owner set the repository owner,
it checks the gitweb.owner, if not set it uses filesystem directory's owner.
Useful when we don't want to maintain project list file, and all
repository directories have to have the same owner (for example when the
same SSH account is shared for all projects, using ssh_acl to control
access instead).
Signed-off-by: Bruno Ribas <ribas@c3sl.ufpr.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Those two configuration variables are important enough that it is
worth to explicitely write about them in the "Gitweb config file
variables" section even if they are usually set during build by
GITWEB_PROJECTROOT and GITWEB_LIST build (Makefile) configuration
variables.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update list of build configuration variables, add references
to gitweb/INSTALL, add description of runtime and per-repository
runtime configuration.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This expands gitweb/README to talk some more about GITWEB_CONFIG, moves
feature-specific documentation in gitweb.cgi to the inside of the %features
array, and adds some short description of all the features.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a small apache configuration which shows how to use apache
to put gitweb and GIT repositories at the same URL.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this patch it is possible to use gitweb.perl for developing by
loading the configuration from $GITWEB_CONFIG. This might also be
useful for normal usage of gitweb.
Example:
% cat cfg
$GIT = '/usr/bin/git';
$projectroot = '/home/matled/src/git';
$projects_list = '/home/matled/src/git/git/gitweb/list';
% cat run
#!/bin/sh
export GATEWAY_INTERFACE="CGI/1.1"
export HTTP_ACCEPT="*/*"
export REQUEST_METHOD="GET"
export GITWEB_CONFIG='./cfg'
export QUERY_STRING=""$1""
exec ./gitweb.perl
% time ./run p=git/.git > /dev/null
This makes it easy to check for warnings and do performance tests
after changes, you can also pipe this to lynx -dump -force-html
/dev/stdin to get more than just html.
This also documents the original patch adding require $GITWEB_CONFIG.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use the normal web server instead of the CGI to provide the git logo,
just like the gitweb.css.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Generate gitweb/gitweb.cgi to reduce the need to patch gitweb.cgi
by the end user. The GIT installation directory is already known
by the Makefile, and can be inserted directly into gitweb.
All other gitweb configuration parameters can now be specified by
providing GITWEB_* variables while building GIT. These are described
in gitweb/README.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fredrik Gustafsson