kernel/git - git - PowerEL Git System

Commit Graph

Author	SHA1	Message	Date
Todd Zullinger	5354a56fe7	Replace uses of "git-var" with "git var" Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
P. Christeas	e8a43a132d	svnimport: newer libsvn wants us to ask for the root with "", not "/" In r27729, libsvn introduced an assert which explicitly forbids searching the tree at "/". Luckily enough, it still accepts an empty string "" as the starting point. http://svn.collab.net/viewvc/svn/trunk/subversion/libsvn_ra/ra_loader.c?r1=27653&r2=27729 Tested against libsvn0-1.5.0-4mdv2009.0 (needs the fix), libsvn0-1.4.6-5mdv2008.1 (works anyway) Signed-off-by: P. Christeas <p_christ@hol.gr> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Petr Baudis	31a92f6aa4	Git.pm: Add remote_refs() git-ls-remote frontend This patch also converts the good ole' git-remote.perl to use it. It is otherwise used in the repo.or.cz machinery and I guess other scripts might find it useful too. Unfortunately, git-ls-remote --heads . is subtly different from git-ls-remote . refs/heads/ (since the second matches anywhere in the string, not just at the beginning) so we have to provide interface for both. Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Miklos Vajna	1c7b76be7d	Build in merge Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Daniel Barkalow	8434c2f1af	Build in clone Thanks to Johannes Schindelin for various comments and improvements, including supporting cloning full bundles. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	c817faabd7	Resurrect git-rerere to contrib/examples It is handy to have a copy readily available for checking regressions. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Johannes Schindelin	211c89682e	Make git-remote a builtin Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Daniel Barkalow	782c2d65c2	Build in checkout The only differences in behavior should be: - git checkout -m with non-trivial merging won't print out merge-recursive messages (see the change in t7201-co.sh) - git checkout -- paths... will give a sensible error message if HEAD is invalid as a commit. - some intermediate states which were written to disk in the shell version (in particular, index states) are only kept in memory in this version, and therefore these can no longer be revealed by later write operations becoming impossible. - when we change branches, we discard MERGE_MSG, SQUASH_MSG, and rr-cache/MERGE_RR, like reset always has. I'm not 100% sure I got the merge recursive setup exactly right; the base for a non-trivial merge in the shell code doesn't seem theoretically justified to me, but I tried to match it anyway, and the tests all pass this way. Other than these items, the results should be identical to the shell version, so far as I can tell. [jc: squashed lock-file fix from Dscho in] Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	5c66d0d458	Officially deprecate repo-config. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	e25cfae667	contrib: resurrect scripted git-revert. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Kristian Høgsberg	f5bbc3225c	Port git commit to C. This makes git commit a builtin and moves git-commit.sh to contrib/examples. This also removes the git-runstatus helper, which was mostly just a git-status.sh implementation detail. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Thomas Harning	a00a42ae33	git-merge-ours: make it a builtin. Except that this fixes a longstanding corner case bug by tightening the way underlying diff-index command is run, it is functionally equivalent to the scripted version. Signed-off-by: Thomas Harning Jr <harningt@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Shawn Bohrer	113f10f22f	Make git-clean a builtin This replaces git-clean.sh with builtin-clean.c, and moves git-clean.sh to the examples. This also introduces a change in behavior when removing directories explicitly specified as a path. For example currently: 1. When dir has only untracked files, these two behave differently: $ git clean -n dir $ git clean -n dir/ the former says "Would not remove dir/", while the latter would say "Would remove dir/untracked" for all paths under it, but not the directory itself. With -d, the former would stop refusing, however since the user explicitly asked to remove the directory the -d is no longer required. 2. When there are more parameters: $ git clean -n dir foo $ git clean -n dir/ foo both cases refuse to remove dir/ unless -d is specified. Once again since both cases requested to remove dir the -d is no longer required. Thanks to Johannes Schindelin for the conversion to using the parse-options API. Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Daniel Barkalow	8951d7c1f1	Build in ls-remote This actually replaces peek-remote with ls-remote, since peek-remote now handles everything. peek-remote remains an a second name for ls-remote, although its help message now gives the "ls-remote" name. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Gerrit Pape	fee9832a8d	No longer install git-svnimport, move to contrib/examples This has been proposed for a few times without much reaction from the list. Actually remove it to see who screams. Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
David Kastrup	822f7c7349	Supplant the "while case ... break ;; esac" idiom A lot of shell scripts contained stuff starting with while case "$#" in 0) break ;; esac and similar. I consider breaking out of the condition instead of the body od the loop ugly, and the implied "true" value of the non-matching case is not really obvious to humans at first glance. It happens not to be obvious to some BSD shells, either, but that's because they are not POSIX-compliant. In most cases, this has been replaced by a straight condition using "test". "case" has the advantage of being faster than "test" on vintage shells where "test" is not a builtin. Since none of them is likely to run the git scripts, anyway, the added readability should be worth the change. A few loops have had their termination condition expressed differently. Signed-off-by: David Kastrup <dak@gnu.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Daniel Barkalow	b888d61c83	Make fetch a builtin Thanks to Johannes Schindelin for review and fixes, and Julian Phillips for the original C translation. This changes a few small bits of behavior: branch.<name>.merge is parsed as if it were the lhs of a fetch refspec, and does not have to exactly match the actual lhs of a refspec, so long as it is a valid abbreviation for the same ref. branch.<name>.merge is no longer ignored if the remote is configured with a branches/* file. Neither behavior is useful, because there can only be one ref that gets fetched, but this is more consistant. Also, fetch prints different information to standard out. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Carlos Rica	0e5a7faa3a	Make "git reset" a builtin. This replaces the script "git-reset.sh" with "builtin-reset.c". A few git commands used in the script are called from the builtin also: "ls-files" to check for unmerged files, "read-tree" for resetting the index file in "mixed" and "hard" resets, and "update-index" to refresh at the end in the "mixed" reset and also for the option that gets selected paths into the index. The reset option with paths was implemented by Johannes Schindelin. Since the option that gets selected paths into the index is not a "reset" like the others because it does not change the HEAD at all, now the command is showing a warning when the "--mixed" option is supplied for that purpose. The following table shows the behaviour of "git reset" for the different supported options, where X means "changing" the HEAD, index or working tree: reset: --soft --mixed --hard -- <paths> HEAD X X X - index - X X X files - - X - Signed-off-by: Carlos Rica <jasampler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Carlos Rica	2ae68fcb78	Make verify-tag a builtin. This replaces "git-verify-tag.sh" with "builtin-verify-tag.c". Testing relies on the "git tag -v" tests calling this command. A temporary file is needed when calling to gpg, because git is already creating detached signatures (gpg option -b) to sign tags (instead of leaving gpg to add the signature to the file by itself), and those signatures need to be supplied in a separate file to be verified by gpg. The program uses git_mkstemp to create that temporary file needed by gpg, instead of the previously used "$GIT_DIR/.tmp-vtag", in order to allow the command to be used in read-only repositories, and also prevent other instances of git to read or remove the same file. Signal SIGPIPE is ignored because the program sometimes was terminated because that signal when writing the input for gpg. The command now can receive many tag names to be verified. Documentation is also updated here to reflect this new behaviour. Signed-off-by: Carlos Rica <jasampler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Carlos Rica	62e09ce998	Make git tag a builtin. This replaces the script "git-tag.sh" with "builtin-tag.c". The existing test suite for "git tag" guarantees the compatibility with the features provided by the script version. There are some minor changes in the behaviour of "git tag" here: "git tag -v" now can get more than one tag to verify, like "git tag -d" does, "git tag" with no arguments prints all tags, more like "git branch" does, and "git tag -n" also prints all tags with annotations (without needing -l). Tests and documentation were also updated to reflect these changes. The program is currently calling the script "git verify-tag" for verify. This can be changed porting it to C and calling its functions directly from builtin-tag.c. Signed-off-by: Carlos Rica <jasampler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Junio C Hamano	5be60078c9	Rewrite "git-frotz" to "git frotz" This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
James Bowes	6757ada403	Make gc a builtin. Signed-off-by: James Bowes <jbowes@dangerouslyinc.com> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	207dfa0791	Remove git-resolve. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago

34 Commits (a0e46390d397e71182e42930b98b6b59a1a84898)