Add a new helper function, strbuf_add_indented_text(), to indent text
without a width limit, and call it from strbuf_add_wrapped_text(). It
respects both indent (applied to the first line) and indent2 (applied to
the rest of the lines); indent2 was ignored by the indent-only path of
strbuf_add_wrapped_text() before the patch.
Two simple test cases are added, one exercising strbuf_add_wrapped_text()
and the other strbuf_add_indented_text().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we're at it, also unset GREP_COLOR and GREP_COLORS in case colouring
is not enabled, to be on the safe side. The presence of these variables
alone is not sufficient to trigger coloured output with GNU grep, but
other implementations may behave differently.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the Table of Contents, there is a notable inconsistency:
first there is "GIT Glossary", followed by "Git Quick Reference"
on the very next line.
Running "grep -c" on user-manual.txt, I find 780 occurrrences of
"git", 37 occurrences of "Git", and 9 occurrences of "GIT".
In general, "git" is the preferred spelling, except at the
beginning of a sentence.
Therefore, change "GIT Glossary" to "Git Glossary" for consistency
with the rest of the document.
Looking at the other eight occurrences of "GIT" I found one other
occurrence that should be changed:
* The mention of "StGIT". Looking at the web pages for "Stacked Git"
at http://www.procode.org/stgit, I only saw the spelling "StGit",
except in http://wiki.procode.org/cgi-bin/wiki.cgi/StGIT_Tutorial,
but that page was last updated in 2006.
The other seven occurrences should not be changed:
* Three occurrences were in the output of 'git show-branch' run
on the git.git repository.
* One occurrence was in the output of 'git cat-file'.
* One occurrence was as part of the file name "GIT-VERSION-GEN".
* Two occurrences were in comments in scripts quoted in a description
of Tony Luck's workflow.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage messages for some commands (such as 'git diff-tree')
are truncated because they don't fit in a fixed buffer of
1024 bytes.
It would be tempting to eliminate the buffer and the problem once
and for all by doing the output in three steps, but doing so could
(according to commit d048a96e) increase the likelyhood of messing
up the display.
So we just increase the size of the buffer.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We explain the user why uncommited changes can be problematic with merge,
and point to "commit" and "stash" for the solution. While talking about
commited Vs uncommited changes, we also make it clear that the result of
a merge is normally commited.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-before-pull is well accepted in the DVCS community, but is
confusing some new users. This should get them back in the right way when
the problem occurs.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal no_reuse_existing flag is set to allow initializing
multiple remotes with the same URL, common with SVM users.
Unfortunately, this flag caused misbehavior when used
with the -R command-line flag for fetching.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The documentation for 'git apply' uses both the terms
"work tree" and "working tree". Since the glossary uses
the term "working tree", change all occurrences of
"work tree" to "working tree".
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for 'git apply' talks about applying a
patch/diff to the index and to the working tree, which seems
to imply that it will not work outside a git repository.
Actually 'git patch' works outside a repository (which can
be useful especially for applying binary or rename patches that
the standard "patch" utility cannot handle), so the documentation
should mention it.
Thanks to Junio for suggesting better wording.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description for -z is too vague and general for the
apply, diff*, and log commands.
Change the description of -z for 'git log' to note that
commits will be separated by NULs.
Change the description of -z for 'git diff*' and 'git apply'
to note that it applies to the --numstat option, and for
'git diff*' also for --raw option.
Also correct the description of the "munging" of pathanmes that
takes place in the absence of -z for the 'git diff*' and
'git apply' commands, namely that apart from the characters mentioned,
double quotes will also be escaped and that the pathname will be
enclosed in double quotes if any characters are escaped.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not write literal "~/" or "~user" but use "{tilde}/" and "{tilde}user";
otherwise the text between them gets enclosed in
"<subscript>...</subscript>".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jh/notes' (early part):
Add selftests verifying concatenation of multiple notes for the same commit
Refactor notes code to concatenate multiple notes annotating the same object
Add selftests verifying that we can parse notes trees with various fanouts
Teach the notes lookup code to parse notes trees with various fanout schemes
Teach notes code to free its internal data structures on request
Add '%N'-format for pretty-printing commit notes
Add flags to get_commit_notes() to control the format of the note string
t3302-notes-index-expensive: Speed up create_repo()
fast-import: Add support for importing commit notes
Teach "-m <msg>" and "-F <file>" to "git notes edit"
Add an expensive test for git-notes
Speed up git notes lookup
Add a script to edit/inspect notes
Introduce commit notes
Conflicts:
.gitignore
Documentation/pretty-formats.txt
pretty.c
* sp/smart-http: (37 commits)
http-backend: Let gcc check the format of more printf-type functions.
http-backend: Fix access beyond end of string.
http-backend: Fix bad treatment of uintmax_t in Content-Length
t5551-http-fetch: Work around broken Accept header in libcurl
t5551-http-fetch: Work around some libcurl versions
http-backend: Protect GIT_PROJECT_ROOT from /../ requests
Git-aware CGI to provide dumb HTTP transport
http-backend: Test configuration options
http-backend: Use http.getanyfile to disable dumb HTTP serving
test smart http fetch and push
http tests: use /dumb/ URL prefix
set httpd port before sourcing lib-httpd
t5540-http-push: remove redundant fetches
Smart HTTP fetch: gzip requests
Smart fetch over HTTP: client side
Smart push over HTTP: client side
Discover refs via smart HTTP server when available
http-backend: more explict LocationMatch
http-backend: add example for gitweb on same URL
http-backend: use mod_alias instead of mod_rewrite
...
Conflicts:
.gitignore
remote-curl.c
* jn/editor-pager:
Provide a build time default-pager setting
Provide a build time default-editor setting
am -i, git-svn: use "git var GIT_PAGER"
add -i, send-email, svn, p4, etc: use "git var GIT_EDITOR"
Teach git var about GIT_PAGER
Teach git var about GIT_EDITOR
Suppress warnings from "git var -l"
Do not use VISUAL editor on dumb terminals
Handle more shell metacharacters in editor names
* bg/format-patch-doc-update:
format-patch: Add "--no-stat" as a synonym for "-p"
format-patch documentation: Fix formatting
format-patch documentation: Remove diff options that are not useful
format-patch: Always generate a patch
* jn/gitweb-log-history:
gitweb: Make 'history' view (re)use git_log_generic()
gitweb: Refactor common parts of 'log' and 'shortlog' views
gitweb: Refactor 'log' action generation, adding git_log_body()
* jn/help-everywhere: (23 commits)
diff --no-index: make the usage string less scary
merge-{recursive,subtree}: use usagef() to print usage
Introduce usagef() that takes a printf-style format
Let 'git <command> -h' show usage without a git dir
Show usage string for 'git http-push -h'
Let 'git http-fetch -h' show usage outside any git repository
Show usage string for 'git stripspace -h'
Show usage string for 'git unpack-file -h'
Show usage string for 'git show-index -h'
Show usage string for 'git rev-parse -h'
Show usage string for 'git merge-one-file -h'
Show usage string for 'git mailsplit -h'
Show usage string for 'git imap-send -h'
Show usage string for 'git get-tar-commit-id -h'
Show usage string for 'git fast-import -h'
Show usage string for 'git check-ref-format -h'
http-fetch: add missing initialization of argv0_path
Show usage string for 'git show-ref -h'
Show usage string for 'git merge-ours -h'
Show usage string for 'git commit-tree -h'
...
Conflicts:
imap-send.c
* jp/fetch-cull-many-refs:
remote: fix use-after-free error detected by glibc in ref_remove_duplicates
fetch: Speed up fetch of large numbers of refs
remote: Make ref_remove_duplicates faster for large numbers of refs
The current man page does a reasonable job at describing branch management
during the development process, but it does not contain any guidance as to
how the branches are affected by releases.
Add a basic introduction to the branch management undertaken during a
git.git release, so that a reader may gain some insight into how the
integration, maintenance, and topic branches are affected during the
release transition, and is thus able to better design the process for their
own project.
Other release activities such as reviews, testing, and creating
distributions are currently out of scope.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are rebasing we know that the header lines in the
patch are good and that we don't need to pick up any headers
from the body of the patch.
This makes it possible to rebase commits whose commit message
start with "From" or "Date".
Test vectors by Jeff King.
Signed-off-by: Lukas Sandström <luksan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the usage string for a subcommand must be printed,
only print the information relevant to that command.
This commit also removes the complete options list from
the first line of the subcommand usage string. Instead,
individual options are documented in the detailed
description following the general usage line.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running one round of estimate_similarity(), filespecs on either
side will have populated their cnt_data fields, and we do not need
the blob text anymore. We used to retain the blob data to optimize
for smaller projects (not freeing the blob data here would mean that
the final output phase would not have to re-read it), but we are
efficient enough without such optimization for smaller projects anyway,
and freeing memory early will help larger projects.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch fix a missing "s" at the end of an occurence of
"--no-replace-objects" and, while at it, it also improves spelling
and rendering.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This has the same effect as --no-replace-objects option; git ignores the
replace refs. When --no-replace-objects option is passed to git, this
environment variable is set to "1" and exported to subprocesses in order
to propagate the same setting.
It is useful for example for scripts, as the git commands used in them can
now be aware that they must not read replace refs.
Tested-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
4d23660 (describe: when failing, tell the user about options that
work, 2009-10-28) forgot to update the shortcut path where the code
detected and used a possible exact match. This means that an
unannotated tag on HEAD would be used by 'git describe'.
Guard this code path against the new circumstances, where unannotated
tags can be present in ->util even if we're not actually planning to
use them.
While there, also add some tests for --all.
Reported by 'yashi' on IRC.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
i686-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1 (Apple Inc. build 5493) compiler
(and probably others) mistakenly thinks variable 'right' is used
before assigned. Work around it by giving it a fake initialization.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the command line arguments, after giving zero or more revs, you can
feed a line "--" and then feed pathspecs one at a time.
With this
(
echo ^maint
echo --
echo Documentation
) | git log --stat --oneline --stdin master -- t
lists commits that touch Documentation/ or t/ between maint and master.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is necessary because we will later allow pathspecs to be fed from the
standard input, and pathspecs taken from the command line (and converted
via get_pathspec() already) in revs->prune_data too early gets in the way
when we want to append from the standard input.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the logic to read revs from standard input that rev-list knows about
from it to revision machinery, so that all the users of setup_revisions()
can feed the list of revs from the standard input when "--stdin" is used
on the command line.
Allow some users of the revision machinery that want different semantics
from the "--stdin" option to disable it by setting an option in the
rev_info structure.
This also cleans up the kludge made to bundle.c via cut and paste.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is so 2005 (and Linus ;-) to have a fixed 1000-byte buffer that
reads from the user. Let's use strbuf to unlimit the input length.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cygwin has st_blocks in struct stat, but at least on NTFS, the field
counts in blocks of st_blksize bytes, not in 512-byte blocks.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
graph_release() was removed in 064bfbd. Cut it from the API
documentation and a comment.
Signed-off-by: Greg Price <price@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently handleLine() assumes that a commit author name will always
start with a capital letter. It's possible that the author name is
user@example.com and therefore calling a match() on the name will fail
to return any matches. Subsequently joining these matches will cause an
exception. Fix by checking that we have a match before trying to join
the results into a set of initials for the author.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The t/t9700/test.pl script uses method invocation syntax when
using the Cwd module to determine the current working directory.
This fails on cygwin, since cygwin perl specifically checks for
any arguments to the cwd() function and croak()'s with the message
"Usage: Cwd::cwd()". (In perl v5.8.8 distribution, see the file
perl-5.8.8/cygwin/cygwin.c lines 139-157)
In order to avoid the problem, we replace the method invocation
syntax with a simple function call.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 395de250d (Expand ~ and ~user in core.excludesfile, commit.template),
we introduced the mechanism. But expanding ~ using getpw is not what
people overriding $HOME would usually expect. In particular, git looks
for the user's .gitconfig using $HOME, so it's better to be consistent.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a tag is clicked an error is raised due to a missing parameter in
a function call.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Junio C Hamano