The function commit_list_reverse() is not used anymore; delete it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By using commit_list_insert(), we added new items to the top of the
list and, since this is not the order we want, reversed it afterwards.
Simplify this process by adding new items at the bottom instead,
getting rid of the reversal step.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function can be used in other parts of git. Give it a new home
in commit.c.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test "pushing to local repo" in t5800-remote-helpers can hang
due to a race condition in git-remote-testgit. Fix it by
setting stdin to unbuffered.
On the writer side, "git push" invokes push_refs_with_export(),
which sends to stdout the command "export\n" and immediately
starts up "git fast-export". The latter writes its output stream
to the same stdout.
On the reader side, remote helper "git-remote-testgit" reads from
stdin to get its next command. It uses getc() to read characters
from libc up until \n. Libc has buffered a potentially much
larger chunk of stdin. When it sees the "export\n" command, it
forks "git fast-import" to read the stream.
If fast-export finishes before git fast-import starts, the
fast-export output can end up in libc's buffer in
git-remote-testgit, rather than in git fast-import. The latter
hangs indefinitely on a now-empty stdin.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Felipe Contreras (4) and others
* fc/completion-tests:
completion: fix completion after 'git --option <TAB>'
completion: avoid trailing space for --exec-path
completion: add missing general options
completion: simplify by using $prev
completion: simplify __gitcomp_1
tests: add tests for the __gitcomp() completion helper function
tests: add initial bash completion tests
Error message given when @{u} is used for a branch without its
upstream configured have been clatified.
By Zbigniew Jędrzejewski-Szmek
* zj/upstream-error-message:
i18n: mark @{upstream} error messages for translation
Be more specific if upstream branch is not tracked
Provide better message for barnhc_wiht_tpyo@{u}
Provide branch name in error message when using @{u}
t1507: add tests to document @{upstream} behaviour
"gitweb" learns to highlight the patch it outputs even more.
By Michał Kiedrowicz (7) and Jakub Narębski (1)
* mk/gitweb-diff-hl:
gitweb: Refinement highlightning in combined diffs
gitweb: Highlight interesting parts of diff
gitweb: Push formatting diff lines to print_diff_chunk()
gitweb: Use print_diff_chunk() for both side-by-side and inline diffs
gitweb: Extract print_sidebyside_diff_lines()
gitweb: Pass esc_html_hl_regions() options to esc_html()
gitweb: esc_html_hl_regions(): Don't create empty <span> elements
gitweb: Use descriptive names in esc_html_hl_regions()
When "git fetch" encounters repositories with too many references, the
command line of "fetch-pack" that is run by a helper e.g. remote-curl,
may fail to hold all of them. Now such an internal invocation can feed
the references through the standard input of "fetch-pack".
By Ivan Todoroski
* it/fetch-pack-many-refs:
remote-curl: main test case for the OS command line overflow
fetch-pack: test cases for the new --stdin option
remote-curl: send the refs to fetch-pack on stdin
fetch-pack: new --stdin option to read refs from stdin
The parser in "fast-import" did not diagnose ":9" style references
that is not followed by required SP/LF as an error.
By Pete Wyckoff
* pw/fast-import-dataref-parsing:
fast-import: tighten parsing of datarefs
Allows walking only a sub-hierarchy in refs/*.
By Michael Haggerty
* mh/ref-api:
do_for_each_ref(): only iterate over the subtree that was requested
refs: store references hierarchically
sort_ref_dir(): simplify logic
refs.c: rename ref_array -> ref_dir
struct ref_entry: nest the value part in a union
check_refname_component(): return 0 for zero-length components
free_ref_entry(): new function
names_conflict(): simplify implementation
repack_without_ref(): reimplement using do_for_each_ref_in_array()
do_for_each_ref_in_arrays(): new function
do_for_each_ref_in_array(): new function
refs: manage current_ref within do_one_ref()
refs.c: reorder definitions more logically
"git push --recurse-submodules" learns to optionally look into the
histories of submodules bound to the superproject and push them out.
By Heiko Voigt
* hv/submodule-recurse-push:
push: teach --recurse-submodules the on-demand option
Refactor submodule push check to use string list instead of integer
Teach revision walking machinery to walk multiple times sequencially
In HTTP with keep-alive it's not uncommon for the client to notice that
the server decided to stop maintaining the current connection only when
sending a new request. This naturally results in -EPIPE and possibly
SIGPIPE.
The subversion library itself makes no provision for SIGPIPE. Some
combinations of the underlying libraries do (typically SIG_IGN-ing it),
some don't.
Presumably for that reason all subversion commands set SIGPIPE to
SIG_IGN early in their main()-s.
So should we.
This, together with the previous patch, fixes the notorious "git-svn
died of signal 13" problem (see e.g.
http://thread.gmane.org/gmane.comp.version-control.git/134936).
Signed-off-by: Roman Kagan <rkagan@mail.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
In order to maintain consistency of the database mapping svn revision
numbers to git commit ids, rev_map_set() defers signal processing until
it's finished with an append transaction.[*]
The conventional way to achieve this is through sigprocmask(), which is
available in perl in the standard POSIX module.
This is implemented by this patch. One important consequence of it is
that the signal handlers won't be unconditionally set to SIG_DFL anymore
upon the first invocation of rev_map_set() as they used to. As a
result, the signals ignored by git-svn parent will remain ignored;
otherwise the behavior remains the same.
This patch paves the way to ignoring SIGPIPE throughout git-svn which
will be done in the followup patch.
[*] Deferring signals is not enough to ensure the database consistency:
the program may die on SIGKILL or power loss, run out of disk space,
etc. However that's a separate issue that this patch doesn't address.
Signed-off-by: Roman Kagan <rkagan@mail.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
Fix two places that were the only place in the test suite that gave "a\+"
to platform grep and expected it to mean one or more "a", which is a
blatant GNUism.
* bw/test-fix-grep-gnuism:
t9400: fix gnuism in grep
By Jonathan Nieder
* jn/more-i18ncmp:
test: am of empty patch should not succeed
test: use test_i18ncmp for "Patch format detection failed" message
test: do not rely on US English tracking-info messages
"git fetch" that recurses into submodules on demand did not check if
it needs to go into submodules when non branches (most notably, tags)
are fetched.
By Jens Lehmann
* jl/maint-submodule-recurse-fetch:
submodules: recursive fetch also checks new tags for submodule commits
"git blame" started missing quite a few changes from the origin since we
stopped using the diff minimalization by default in v1.7.2 era.
* jc/maint-blame-minimal:
blame: accept --need-minimal
"log -p --graph" used with "--stat" had a few formatting error.
By Lucian Poston
* lp/maint-diff-three-dash-with-graph:
t4202: add test for "log --graph --stat -p" separator lines
log --graph: fix break in graph lines
log --graph --stat: three-dash separator should come after graph lines
Setting up a revision traversal with many starting points was inefficient
as these were placed in a date-order priority queue one-by-one.
By René Scharfe (3) and Junio C Hamano (1)
* rs/commit-list-sort-in-batch:
mergesort: rename it to llist_mergesort()
revision: insert unsorted, then sort in prepare_revision_walk()
commit: use mergesort() in commit_list_sort_by_date()
add mergesort() for linked lists
Valgrind reports quite a lot of discarded memory inside apply.
Fix them, audit and document the buffer ownership rules.
By Junio C Hamano (8) and Jared Hance (1)
* jh/apply-free-patch:
apply: document buffer ownership rules across functions
apply: tighten constness of line buffer
apply: drop unused macro
apply: free unused fragments for submodule patch
apply: free patch->result
apply: release memory for fn_table
apply: free patch->{def,old,new}_name fields
apply: rename free_patch() to free_patch_list()
apply: do not leak patches and fragments
Make it easier for distros to document custom pager and editor they
used when building their binary releases in "git var" documentation.
By Jonathan Nieder
* jn/debian-customizes-default-editor:
var doc: advertise current DEFAULT_PAGER and DEFAULT_EDITOR settings
var doc: default editor and pager are configurable at build time
"git rev-parse --show-prefix" emitted nothing when run at the
top-level of the working tree, while "git rev-parse --show-cdup" gave
an empty line. Make them consistent.
By Ross Lagerwall
* rl/show-empty-prefix:
rev-parse --show-prefix: add in trailing newline
Adds some subcommands that were not listed in "git remote --help"
usage strings.
As an independent follow-up, we may want to rethink how the overall
usage string and subcommand usage strings are maintained.
By Michael Schubert
* ms/remote-usage-string:
remote: update builtin usage
Giving "--continue" to a conflicted "rebase -i" session skipped a commit
that only results in changes to submodules.
By John Keeping
* jk/rebase-i-submodule-conflict-only:
rebase -i continue: don't skip commits that only change submodules
The bash completion doesn't work when certain options to git itself are
specified, e.g. 'git --no-pager <TAB>' errors out with
error: invalid key: alias.--no-pager
The main _git() completion function finds out the git command name by
looping through all the words on the command line and searching for
the first word that is not a known option for the git command.
Unfortunately the list of known git options was not updated in a long
time, and newer options are not skipped but mistaken for a git command.
Such a misrecognized "command" is then passed to __git_aliased_command(),
which in turn passes it to a 'git config' query, hence the error.
Currently the following options are misrecognized for a git command:
-c --no-pager --exec-path --html-path --man-path --info-path
--no-replace-objects --work-tree= --namespace=
To fix this we could just update the list of options to be skipped,
but the same issue will likely arise, if the git command learns a new
option in the future. Therefore, to make it more future proof against
new options, this patch changes that loop to skip all option-looking
words, i.e. words starting with a dash.
We also have to handle the '-c' option specially, because it takes a
configutation parameter in a separate word, which must be skipped,
too.
[fc: added tests]
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"--exec-path" looks to the completion script like an unambiguous
successful completion, but it is wrong to emit a SP after it as if
declaring that we are done with completion; the user could be trying
to do
git --exec-path; # print name of helper directory
or
git --exec-path=/path/to/alternative/helper/dir <subcommand>
so the most helpful thing to do is to leave out the trailing space and
leave it to the operator to type an equal sign or carriage return
according to the situation.
[fc: added tests]
Cc: Andreas Schwab <schwab@linux-m68k.org>
Reported-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests check that trailing space, prefix, and suffix are added
correctly.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mops up an unfortunate fallout from bw/spawn-via-shell-path topic.
By Johannes Sixt
* js/spawn-via-shell-path-fix:
Do not use SHELL_PATH from build system in prepare_shell_cmd on Windows
Break down the cases in which "git push" fails due to non-ff into
three categories, and give separate advise messages for each case.
By Christopher Tiwald (2) and Jeff King (1)
* ct/advise-push-default:
Fix httpd tests that broke when non-ff push advice changed
clean up struct ref's nonfastforward field
push: Provide situational hints for non-fast-forward errors
When PATH contains an unreadable directory, alias expansion code did not
kick in, and failed with an error that said "git-subcmd" was not found.
By Jeff King (1) and Ramsay Jones (1)
* jk/run-command-eacces:
run-command: treat inaccessible directories as ENOENT
compat/mingw.[ch]: Change return type of exec functions to int
Fix broken 'push to upstream' implementation. "git push $there" without
refspec, when the current branch is set to push to a remote different from
$there, used to push to $there using the upstream information to a remote
unreleated to $there.
* jc/push-upstream-sanity:
push: error out when the "upstream" semantics does not make sense
When "git am -3" needs to fall back to an application to a synthesized
preimage followed by a 3-way merge, the paths that needed such treatment
are now reported to the end user, so that the result in them can be
eyeballed with extra care.
* jc/am-report-3way:
am -3: list the paths that needed 3-way fallback
"git am" learned the "--include" option, which is an opposite of existing
the "--exclude" option.
By Johannes Berg
* jb/am-include:
am: support --include option
The "fmt-merge-msg" command learns to list the primary contributors
involved in the side topic you are merging.
* jc/fmt-merge-msg-people:
fmt-merge-msg: show those involved in a merged series
René Scharfe