"git p4" updates.
* ld/git-p4-updates:
git-p4: auto-size the block
git-p4: narrow the scope of exceptions caught when parsing an int
git-p4: raise exceptions from p4CmdList based on error from p4 server
git-p4: better error reporting when p4 fails
git-p4: add option to disable syncing of p4/master with p4
git-p4: disable-rebase: allow setting this via configuration
git-p4: add options --commit and --disable-rebase
Paths can be longer than PATH_MAX. Avoid a buffer overrun in
check_dir_renamed() by using xstrdup() to make a private copy safely.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was not "newer versions of bash" but newer versions of
bash-completion that made commit 085e2ee0e6 (completion: load
completion file for external subcommand, 2018-04-29) both necessary
and possible.
Update the corresponding RelNotes entry accordingly.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Three tests in 't7406-submodule-update' contain broken &&-chains, but
since they are all in subshells, chain-lint couldn't notice them.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code path that triggered that "BUG" really does not want to run
without an explicit commit message. In the case where we want to amend a
commit message, we have an *implicit* commit message, though: the one of
the commit to amend. Therefore, this code path should not even be
entered.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When splitting a repository, running `git rebase -i --root` to reword
the initial commit, Git dies with
BUG: sequencer.c:795: root commit without message.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value of ewah_read_mmap() is now an ssize_t,
since we could (in theory) process up to 32GB of data. This
would never happen in practice, but a corrupt or malicious
.bitmap or index file could convince us to do so.
Let's make sure that we don't stuff the value into an int,
which would cause us to incorrectly move our pointer
forward. We'd always move too little, since negative values
are used for reporting errors. So the worst case is just
that we end up reporting a corrupt file, not an
out-of-bounds read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The on-disk ewah format tells us how big the ewah data is,
and we blindly read that much from the buffer without
considering whether the mmap'd data is long enough, which
can lead to out-of-bound reads.
Let's make sure we have data available before reading it,
both for the ewah header/footer as well as for the bit data
itself. In particular:
- keep our ptr/len pair in sync as we move through the
buffer, and check it before each read
- check the size for integer overflow (this should be
impossible on 64-bit, as the size is given as a 32-bit
count of 8-byte words, but is possible on a 32-bit
system)
- return the number of bytes read as an ssize_t instead of
an int, again to prevent integer overflow
- compute the return value using a pointer difference;
this should yield the same result as the existing code,
but makes it more obvious that we got our computations
right
The included test is far from comprehensive, as it just
picks a static point at which to truncate the generated
bitmap. But in practice this will hit in the middle of an
ewah and make sure we're at least exercising this code.
Reported-by: Luat Nguyen <root@l4w.io>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support for the --set-upstream option was removed in 52668846ea
(builtin/branch: stop supporting the "--set-upstream" option,
2017-08-17). The change did not completely remove the command
due to an issue noted in the commit's log message.
So, a test was added to ensure that a command which uses the
'--set-upstream' option fails instead of silently acting as an alias
for the '--set-upstream-to' option due to option parsing features.
To avoid confusion, clarify that the option is disabled intentionally
in the corresponding test description.
The test is expected to be around as long as we intentionally fail
on seeing the '--set-upstream' option which in turn we expect to
do for a period of time after which we can be sure that existing
users of '--set-upstream' are aware that the option is no
longer supported.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Makefile tweak NO_ICONV is meant to allow Git to be built without
iconv in case iconv is not installed or is otherwise dysfunctional.
However, NO_ICONV's disabling of iconv is incomplete and can incorrectly
allow "-liconv" to slip into the linker flags when NEEDS_LIBICONV is
defined, which breaks the build when iconv is not installed.
On some platforms, iconv lives directly in libc, whereas, on others it
resides in libiconv. For the latter case, NEEDS_LIBICONV instructs the
Makefile to add "-liconv" to the linker flags. config.mak.uname
automatically defines NEEDS_LIBICONV for platforms which require it.
The adding of "-liconv" is done unconditionally, despite NO_ICONV.
Work around this problem by making NO_ICONV take precedence over
NEEDS_LIBICONV.
Reported by: Mahmoud Al-Qudsi <mqudsi@neosmart.net>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The syntax "git merge <message> HEAD <commit>" has been removed. The
order of the syntax should also be updated.
Signed-off-by: Meng-Sung Wu <mengsungwu@fortunewhite.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paths can be longer than PATH_MAX. Avoid a buffer overrun in
check_dir_renamed() by using xstrdup() to make a private copy safely.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"index-pack --strict" has been taught to make sure that it runs the
final object integrity checks after making the freshly indexed
packfile available to itself.
* jk/index-pack-maint:
index-pack: correct install_packed_git() args
index-pack: handle --strict checks of non-repo packs
prepare_commit_graft: treat non-repository as a noop
Work around zsh segfaulting when loading git-completion.zsh
* sg/completion-zsh-workaround:
completion: correct zsh detection when run from git-completion.zsh
Finishing touches to a topic that already is in 'maint'.
* jk/submodule-fsck-loose-fixup:
fsck: avoid looking at NULL blob->object
t7415: don't bother creating commit for symlink test
The buffer being passed to zlib includes a NUL terminator that git
needs to keep in place. unpack_compressed_entry() attempts to detect
the case that the source buffer hasn't been fully consumed by
checking to see if the destination buffer has been over consumed.
This causes a problem, that more recent zlib patches have been
poisoning the unconsumed portions of the buffer which overwrites
the NUL byte, while correctly returning length and status.
Let's place the NUL at the end of the buffer after inflate returns
to assure that it doesn't result in problems for git even if its
been overwritten by zlib.
Signed-off-by: Jeremy Linton <lintonrjeremy@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mention that this feature works with some commands (merge and cherry-pick,
implying that it also works with commands that build on these like rebase
-m and rebase -i). Explicitly mentioning two commands hopefully implies
that it may not always work with other commands (am, and rebase without
flags that imply either -m or -i).
Also, since the directory rename detection from this cycle was
specifically added in merge-recursive and not diffcore-rename, remove the
'in "diff" family" phrase from the note. (Folks have requested in the
past that `git diff` detect directory renames and somehow simplify its
output, so it may be helpful to avoid implying that diff has any new
capability here.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the obvious consensus of hyphenated "remote-tracking branch", and
fix an obvious typo, all in documentation and comments.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "autodie" module was added in Perl 5.10.1, but our INSTALL
document says "version 5.8 or later is needed".
As discussed in <87efhfvxzu.fsf@evledraar.gmail.com> this script is in
contrib/, so we might not want to apply that policy, however in this
case "autodie" was recently added as a "gratuitous safeguard" in
786ef50a23 ("git-credential-netrc: accept gpg option",
2018-05-12) (see
<CAHqJXRE8OKSKcck1APHAHccLZhox+tZi8nNu2RA74RErX8s3Pg@mail.gmail.com>).
Looking at it more carefully the addition of "autodie" inadvertently
introduced a logic error, since having it is equivalent to this patch:
@@ -245,10 +244,10 @@ sub load_netrc {
if ($gpgmode) {
my @cmd = ($options{'gpg'}, qw(--decrypt), $file);
log_verbose("Using GPG to open $file: [@cmd]");
- open $io, "-|", @cmd;
+ open $io, "-|", @cmd or die "@cmd: $!";
} else {
log_verbose("Opening $file...");
- open $io, '<', $file;
+ open $io, '<', $file or die "$file: $!$!;
}
# nothing to do if the open failed (we log the error later)
As shown in the context the intent of that code is not do die but to
log the error later.
Per my reading of the file this was the only thing autodie was doing
in this file (there was no other code it altered). So let's remove it,
both to fix the logic error and to get rid of the dependency.
1. <87efhfvxzu.fsf@evledraar.gmail.com>
(https://public-inbox.org/git/87efhfvxzu.fsf@evledraar.gmail.com/)
2. <CAHqJXRE8OKSKcck1APHAHccLZhox+tZi8nNu2RA74RErX8s3Pg@mail.gmail.com>
(https://public-inbox.org/git/CAHqJXRE8OKSKcck1APHAHccLZhox+tZi8nNu2RA74RErX8s3Pg@mail.gmail.com/)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4 originally would fetch changes in one query. On large repos this
could fail because of the limits that Perforce imposes on the number of
items returned and the number of queries in the database.
To fix this, git-p4 learned to query changes in blocks of 512 changes,
However, this can be very slow - if you have a few million changes,
with each chunk taking about a second, it can be an hour or so.
Although it's possible to tune this value manually with the
"--changes-block-size" option, it's far from obvious to ordinary users
that this is what needs doing.
This change alters the block size dynamically by looking for the
specific error messages returned from the Perforce server, and reducing
the block size if the error is seen, either to the limit reported by the
server, or to half the current block size.
That means we can start out with a very large block size, and then let
it automatically drop down to a value that works without error, while
still failing correctly if some other error occurs.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code traps all exceptions around some code which parses an
integer, and then talks to Perforce.
That can result in errors from Perforce being ignored. Change the code
to only catch the integer conversion exceptions.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change lays some groundwork for better handling of rowcount errors
from the server, where it fails to send us results because we requested
too many.
It adds an option to p4CmdList() to return errors as a Python exception.
The exceptions are derived from P4Exception (something went wrong),
P4ServerException (the server sent us an error code) and
P4RequestSizeException (we requested too many rows/results from the
server database).
This makes the code that handles the errors a bit easier.
The default behavior is unchanged; the new code is enabled with a flag.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when p4 fails to run, git-p4 just crashes with an obscure
error message.
For example, if the P4 ticket has expired, you get:
Error: Cannot locate perforce checkout of <path> in client view
This change checks whether git-p4 can talk to the Perforce server when
the first P4 operation is attempted, and tries to print a meaningful
error message if it fails.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an option to the git-p4 submit command to disable syncing
with Perforce.
This is useful for the case where a git-p4 mirror has been setup
on a server somewhere, running from (e.g.) cron, and developers
then clone from this. Having the local cloned copy also sync
from Perforce just isn't useful.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This just lets you set the --disable-rebase option with the
git configuration options git-p4.disableRebase. If you're
using this option, you probably want to set it all the time
for a given repo.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a daily work with multiple local git branches, the usual way to
submit only a specified commit was to cherry-pick the commit on
master then run git-p4 submit. It can be very annoying to switch
between local branches and master, only to submit one commit. The
proposed new way is to select directly the commit you want to
submit.
Add option --commit to command 'git-p4 submit' in order to submit
only specified commit(s) in p4.
On a daily work developping software with big compilation time, one
may not want to rebase on his local git tree, in order to avoid long
recompilation.
Add option --disable-rebase to command 'git-p4 submit' in order to
disable rebase after submission.
Thanks-to: Cedric Borgese <cedric.borgese@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Romain Merland <merlorom@yahoo.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v2.18.0-rc0~90^2 (completion: reduce overhead of clearing cached
--options, 2018-04-18) worked around a bug in bash's "set" builtin on
MacOS by using compgen instead. It was careful to avoid breaking zsh
by guarding this workaround with
if [[ -n ${ZSH_VERSION-}} ]]
Alas, this interacts poorly with git-completion.zsh's bash emulation:
ZSH_VERSION='' . "$script"
Correct it by instead using a new GIT_SOURCING_ZSH_COMPLETION shell
variable to detect whether git-completion.bash is being sourced from
git-completion.zsh. This way, the zsh variant is used both when run
from zsh directly and when run via git-completion.zsh.
Reproduction recipe:
1. cd git/contrib/completion && cp git-completion.zsh _git
2. Put the following in a new ~/.zshrc file:
autoload -U compinit; compinit
autoload -U bashcompinit; bashcompinit
fpath=(~/src/git/contrib/completion $fpath)
3. Open zsh and "git <TAB>".
With this patch:
Triggers nice git-completion.bash based tab completion
Without:
contrib/completion/git-completion.bash:354: read-only variable: QISUFFIX
zsh:12: command not found: ___main
zsh:15: _default: function definition file not found
_dispatch:70: bad math expression: operand expected at `/usr/bin/g...'
Segmentation fault
Reported-by: Rick van Hattem <wolph@wol.ph>
Reported-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function does not start taking the repository object as a
parameter before v2.18 track. Make the topic mergeable to v2.17
maintenance track by dropping it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano